summaryrefslogtreecommitdiffstats
path: root/src/vnet/ip
AgeCommit message (Collapse)AuthorFilesLines
2021-08-05ip: fix ip punt redirect cliBenoît Ganne2-13/+12
- restore fib paths support for ip4 - initialize payload_proto to the relevant default protocol so that 'via <dev>' paths are supported - fix 'rx all' - fix temp path vector mem leak Type: fix Change-Id: I564d88dc4dce86884ff6791af69974e6d70ff7ca Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-07-29ip: add api test fileFilip Tehlar1-0/+1527
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I49c4183a443b7b39924328900e6a6ac2e09be426
2021-07-15misc: replace CLIB_PREFETCH with clib_prefetch_{load,store}Damjan Marion6-19/+19
Type: refactor Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-07-14ip: fix check_adj_port_range_x1Damjan Marion1-2/+2
Type: fix Change-Id: I776bf797e07bb3cfd0510a4c09d8182edfa193bd Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-07-14ip: improve check_adj_port_range_x1Damjan Marion1-35/+5
Type: improvement Change-Id: I8337f81fdcd196fcb0e61f8129fec322e9a1e8f1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-07-13misc: remove vnet_all_api_h and vnet_msg_enumFilip Tehlar1-14/+0
These file are no longer needed Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I34f8e0b7e17d9e8c06dcd6c5ffe51aa273cdec07
2021-07-13misc: fix init order to avoid startup warningsBin Zhou (bzhou2)1-16/+6
Put plugin init order inside plugin instead of in vnet Type: improvement Signed-off-by: Bin Zhou (bzhou2) <bzhou2@cisco.com> Change-Id: Icbacdb3f1cb4ac9d74e3f78458e8bc333793b4d6
2021-07-01ip: api cleanupFilip Tehlar2-97/+21
Use autogenerated code. Does not change API definitions. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I4b6d881571c158b7a69a78b9680732d090c4f8b5
2021-06-22misc: punt: api cleanupFilip Tehlar2-48/+9
Use autogenerated code. Does not change API definitions. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I13dae61ddb7150c7fe9a7fd0eae73055ff3f2816
2021-06-07pg: Reduce the inclusion of pg.hNeale Ranns4-0/+4
Type: style reduce the number of files recompiled after changing pg.h from 1110 to 102. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I50611eba818eeb3a2dffd437a3c72c77766bed80
2021-05-27ip: allow the 'ip6 enable' on tunnel interface typesNeale Ranns1-27/+19
Type: feature This was limited to HW interface types (for historical reason AFAICT) Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I3785a356ae31722fa60d84f64ec9aa53ebdd615f
2021-05-14vlib: pass node runtime to vlib_buffer_enqueue_to_thread()Damjan Marion4-12/+8
Mechanical change for patch following this one... Type: improvement Change-Id: Iee12f3a8851f35569e6c039494a94fc36e83d20f Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-05-11ip: ensure ttl doesn't decrease to 0 when puntingAloys Augustin1-0/+2
Change-Id: I248ef12fd34ea2a1c383fbcc530a8ffeb31ba92b Type: fix Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2021-05-06vlib: fix the offload flags sizeMohsin Kazmi1-2/+2
Type: fix Change-Id: I433fe3799975fe3ba00fa30226f6e8dae34e88fc Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-05-05vlib: move offload flags to 1st cacheline in vlib_buffer_tMohsin Kazmi2-5/+5
Type: improvement Some tests i.e. ipsec see performance regression when offload flags are moved to 2nd cacheline. This patch moves them back to 1st cacheline. Change-Id: I6ead45ff6d2c467b0d248f409e27c2ba31758741 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-05-01vlib: refactor trajectory trace debug featureBenoît Ganne2-3/+0
trajectory trace has been broken for a while because we used to save the buffer trajectory in a vector pointed to in opaque2. This does not work well when opaque2 is copied (eg. because of a clone) as 2 buffers end up sharing the same vector. This dedicates a full cacheline in the buffer metadata instead when trajectory is compiled in. No dynamic allocation, no sharing, no tears. Type: refactor Change-Id: I6a028ca1b48d38f393a36979e5e452c2dd48ad3f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-04-28ip: extend the punt cli to accept reason filter for sockets registrationArthur de Kerhor1-0/+6
Type: improvement Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com> Change-Id: I769db1213b0936abbf304bc6cf9dbcfbbebf06aa
2021-04-27misc: fix dead storesDamjan Marion1-1/+1
Type: fix Change-Id: I08969e1c4a78f8ac92ec066a3b67e64dc931bc16 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-04-22ip: remove unnecesary inlining in ip4-rewrite nodeDamjan Marion1-16/+3
Type: refactor Change-Id: Ifbaf42ef88a7e0f1715b7b5e342af790e3b6acd9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-04-21vppinfra: more avx512 inlines (compress, expand, from, is_equal_mask)Damjan Marion1-1/+1
Type: improvement Change-Id: I4cb86cafba92ae70cea160b9bf45f28a916ab6db Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-04-18ip: remove dead code from ip_csumDamjan Marion1-1/+0
Type: fix Change-Id: I3b37257e86175743a7bac80c531491565f0a8dcd Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-04-01ip: extend show cmd of ip reassembly configurationAnton Nikolaev4-0/+16
Type: feature Add output of field maximum reassembly length with others ip reassembly configuration fields. This field can be configured via vpp API, but there was no output of this field in vpp cli. Output added for ipv4/ipv6 and full/shallow virtual nodes. Signed-off-by: Anton Nikolaev <anikolaev@netgate.com> Change-Id: Ibbd61aab26189d4a93d32e047d8f4e589fe9f8a5
2021-03-19vxlan: add tunnel cache to graph nodeJunfeng Wang1-6/+4
Type: improvement Signed-off-by: Drenfong Wong <drenfong.wang@intel.com> Change-Id: Ia81aaa86fe071cbbed028cc85c5f3fa0f1940a0f
2021-03-16fib: Allow the creation of new source on the APINeale Ranns2-4/+276
Type: feature an client can dump the existing sources, examine their priorities, then define thier own source. Usefull if a client wants to distingusih between say, static, ospf, bgp, etc routes it has added over the API. Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I5158b4fa1ebe87381ff8707bb173217f56ea274a
2021-03-14ip: extend punt CLI for exception packetsMohammed Hawari2-4/+81
Change-Id: I20e48a5ac8068eccb8d998346d35227c4802bb68 Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: feature
2021-02-19policer: move handoff checks into policer codeBrian Russell1-30/+12
The IP punt policer currently checks if it needs to do worker thread handoff based on the thread index stored in the policer. Move this functionality into the policer code so it can be common for all users of the policer. Type: improvement Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: Ia8d11e62898a58b19d7b27b296f8369baa3e5aa1
2021-02-15vlib: refactor checksum offload supportMohsin Kazmi4-38/+37
Type: refactor This patch refactors the offload flags in vlib_buffer_t. There are two main reasons behind this refactoring. First, offload flags are insufficient to represent outer and inner headers offloads. Second, room for these flags in first cacheline of vlib_buffer_t is also limited. This patch introduces a generic offload flag in first cacheline. And detailed offload flags in 2nd cacheline of the structure for performance optimization. Change-Id: Icc363a142fb9208ec7113ab5bbfc8230181f6004 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-02-15ip: Path MTUNeale Ranns5-13/+1351
Type: feature Support setting the MTU for a peer on an interface. The minimum value of the path and interface MTU is used at forwarding time. the path MTU is specified for a given peer, by address and table-ID. In the forwarding plane the MTU is enfored either: 1 - if the peer is attached, then the MTU is set on the peer's adjacency 2 - if the peer is not attached, it is remote, then a DPO is added to the peer's FIB entry to perform the necessary fragmentation. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
2021-02-15policer: improve policer structBrian Russell1-1/+1
Ensure policer struct is cache aligned and fits in one cache line. Give it a simpler name to reflect its job as the representation of a policer. Type: improvement Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: If1ae4931c818b86eee20306e503f4e5d6b84bd0d
2021-02-12policer: remove SSE2 prefixBrian Russell1-3/+3
The policer code uses a naming convention of prefixing a lot of its definitions with "SSE2" when in fact there is nothing SSE2 specific about them. This is confusing so remove the prefix. Unfortunately it has to stay in the API definitions for backward compatibility. Type: improvement Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I59a7df9fd5ded2575f2e587b2768a025a213b07c
2021-02-08tunnel: support copying TTL and flow label from inner to outerNeale Ranns2-8/+43
Type: feature The added functionality is to support copying TTL and flow label from inner to outer. The .api was extened to support expressing this and also adding a common tunnel endpoint type. i find it best to make API changes in one patch so there are less versions of the API. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I755c1e3f4c475058792af39c1abeda92129efb76
2021-02-05ip: Remove unused include fileNeale Ranns1-1/+0
Type: refactor Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iae135cbca372def29b1dd5e9f29b7db546ef1a3e
2021-02-05nat: 1:1 policy NATOle Troan1-2/+2
A NAT sub-plugin doing statically configured match/rewrite on IP4 input or output. It's stateless (no connection tracking). Currently it supports rewriting of SA, DA and TCP/UDP ports. It should be simple to add new rewrites if required. API: pnat_binding_add, pnat_binding_del, pnat_bindings_get, pnat_interfaces_get CLI: set pnat translation interface <name> match <5-tuple> rewrite <5-tuple> {in|out} [del] show pnat translations show pnat interfaces Trying a new C based unit testing scheme. Where the graph node is tested in isolation. See pnat/pnat_test.c. Also added new cmake targets to generate coverage directly. E.g.: make test_pnat-ccov-report File '/vpp/sdnat/src/plugins/nat/pnat/pnat.c': Name Regions Miss Cover Lines Miss Cover ------------------------------------------------------------------------------------ pnat_interface_by_sw_if_index 39 8 79.49% 13 0 100.00% pnat_instructions_from_mask 9 0 100.00% 13 0 100.00% pnat_binding_add 64 8 87.50% 31 2 93.55% pnat_flow_lookup 4 4 0.00% 10 10 0.00% pnat_binding_attach 104 75 27.88% 33 6 81.82% pnat_binding_detach 30 5 83.33% 23 2 91.30% pnat_binding_del 97 33 65.98% 17 3 82.35% pnat.c:pnat_calc_key_from_5tuple 9 1 88.89% 14 1 92.86% pnat.c:pnat_interface_check_mask 10 2 80.00% 11 2 81.82% pnat.c:pnat_enable 5 0 100.00% 11 0 100.00% pnat.c:pnat_enable_interface 107 26 75.70% 60 15 75.00% pnat.c:pnat_disable_interface 91 30 67.03% 32 7 78.12% pnat.c:pnat_disable 7 2 71.43% 13 7 46.15% ------------------------------------------------------------------------------------ TOTAL 576 194 66.32% 281 55 80.43% File '/vpp/sdnat/src/plugins/nat/pnat/pnat_node.h': Name Regions Miss Cover Lines Miss Cover ------------------------------------------------------------------------------------ pnat_test.c:pnat_node_inline 67 11 83.58% 115 1 99.13% pnat_test.c:pnat_calc_key 9 2 77.78% 14 2 85.71% pnat_test.c:pnat_rewrite_ip4 55 11 80.00% 60 12 80.00% pnat_test.c:format_pnat_trace 1 1 0.00% 12 12 0.00% pnat_node.c:pnat_node_inline 63 63 0.00% 115 115 0.00% pnat_node.c:pnat_calc_key 9 9 0.00% 14 14 0.00% pnat_node.c:pnat_rewrite_ip4 55 55 0.00% 60 60 0.00% pnat_node.c:format_pnat_trace 5 5 0.00% 12 12 0.00% ------------------------------------------------------------------------------------ TOTAL 264 157 40.53% 402 228 43.28% Type: feature Change-Id: I9c897f833603054a8303e7369ebff6512517c9e0 Signed-off-by: Ole Troan <ot@cisco.com>
2021-01-28ip: do policer thread handoff from punt policersBrian Russell3-51/+130
Pass packets arriving at the ip[46] punt policer nodes to punt policer handoff nodes if the worker thread they arrive on is not the same one configured in the policer. Initially, the policer will be tied to the worker thread that it first received a packet on. This will be expanded in future to be a configuration API option. Type: improvement Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: Ic39d936084c354af1859ad3d946da6cd0f6e34d9
2021-01-28ip: add frame queues to punt policer nodesBrian Russell2-0/+10
The policer is not thread safe. In order that handoff could be performed, add a frame queue to each of the punt policer nodes. Type: improvement Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: Iee50267ee7e36f0e6c95b9b43bf651648198b834
2021-01-28ip: Router ID included in flow hashNeale Ranns8-7/+60
Type: feature A device/router needs to have a unique ID which is included in the flow has so that flows are not polarised through the network, i.e. each deice in the network chooses the same nth link for the same flow. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I963e03674adbb085902b4084fdc4886b88f5734c
2021-01-21ip: do not return uninitialized IPv6 ll attributesBenoît Ganne1-3/+7
Type: fix Change-Id: If35cf7da0c3d1b92532cc2e45c164d6b5a08592c Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-01-21ip: Use correct enum type in ip_address_setNeale Ranns2-5/+5
Type: refactor Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ice2bc42838e6d5ba579f449c3f8b0feffebeb719
2021-01-21ip: use IPv6 flowlabel in flow hash computationAhmed Abdelsalam12-96/+111
extends ip6_compute_flow_hash() to include IPv6 flowlabel in flowhash computation Type: improvement Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com> Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1aaa20c9dac729c22b714eea1cdd6e9e4d1f75e
2021-01-21ip: set correct error in ip6-localBenoît Ganne1-3/+3
Type: fix Change-Id: Ib23f823e46494f80d9d857ddde88f4939bf2b3d1 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-01-20ip: add API to retrieve IPv6 link-layer addressBenoît Ganne2-35/+84
Type: feature Change-Id: I5739869490155b0b9674b4faf61882d97e66a4ed Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-01-18ipsec: Support MPLS over IPSec[46] interfaceNeale Ranns1-2/+0
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I89dc3815eabfee135cd5b3c910dea5e2e2ef1333
2021-01-12ip: vtep fixes for alignment and cache update.Ray Kinsella1-2/+2
Minor fixes for Intel AVX-512 alignment, and cache update. Type: fix Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I9f9bebb4ecb3265ffc765affd1ed94d0ba979066
2020-12-28vlib: add missing file template descriptionsPaul Vinciguerra1-1/+1
Add descriptions to clib_file_t template structures so that sockets can be identified via the 'show unix file' cli command. Type: fix Change-Id: Ibf82d55aa6c7b1126bd252b76d0dc8b7076f5046 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-12-27ip: Use full reassembly for fragments in ip6-localNeale Ranns2-3/+1
Type: fix shallow was the default, but probably by accident as it depended on module load order. full assembly is the v4 behaviour. using proper types allows gdb to print enum names. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: If157c5b83614c7adbd7a15a8227a68f8caf4e92c Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-12-16ip: fix possible missing trace indexesKlement Sekera4-0/+28
Add safeguards when tracing packets to avoid cases where clear trace was issue while buffers were held in reassembly. Type: fix Change-Id: I1bdd1e629e8bc08ce63913fd3c4b2327e47dec04 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-12-14misc: move to new pool_foreach macrosDamjan Marion8-49/+49
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-12-11ip: ip4 rewrite prefetch optimizationPiotrX Kleski1-2/+5
Type: improvement ip4_rewrite_inline_with_gso() did vlib_prefetch_buffer_header() for all nodes. However it is not necessary for ip-rewrite, it is only needed by ip-midchain. This patch makes ip4-rewrite prefetches less buffers to save cycles. Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com> Change-Id: Ib82dcb0eda4a2d1d7b8d664f2224d49b72aef50f
2020-12-08fib: Adjacency flag for midchain to perfom flow hash (on inner packet)Neale Ranns1-4/+4
Type: feature Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I964afd9266645de5c87d49c58ce6b48c2c18f97f
2020-12-08fib: Source Address SelectionNeale Ranns4-148/+49
Type: feature Use the FIB to provide SAS (in so far as it is today) - Use the glean adjacency as the record of the connected prefixes = there's a glean per-{interface, protocol, connected-prefix} - Keep the glean up to date with whatever the recieve host prefix is (since it can change) Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I0f3dd1edb1f3fc965af1c7c586709028eb9cdeac