summaryrefslogtreecommitdiffstats
path: root/src/vnet/ipsec/esp_encrypt.c
AgeCommit message (Collapse)AuthorFilesLines
2019-06-05ipsec: fix sa counters in esp-encryptDamjan Marion1-4/+7
Type: fix Fixes: c59b9a2 Change-Id: I6021e67196a4d31ab11d4e3cfbda34b678150701 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-01esp_encrypt: remove unnecessary codeZhiyong Yang1-1/+1
Change-Id: I2d7e873fca6ab266af75814fac5d4cb5cda93cef Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-04-26crypto, ipsec: change GCM IV handlingDamjan Marion1-3/+20
- nonce construction out of salt and iv is ipsec specific so it should be handled in ipsec code - fixes GCM unit tests - GCM IV is constructed out of simple counter, per RFC4106 section 3.1 Change-Id: Ib7712cc9612830daa737f5171d8384f1d361bb61 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-25crypto: improve key handlingDamjan Marion1-3/+2
Change-Id: If96f661d507305da4b96cac7b1a8f14ba90676ad Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-19IPSEC: IPv6 ESP transport mode incorrect packet length and checksum (VPP-1654)Neale Ranns1-7/+14
Change-Id: Ia3474e5bfea5764eae9b2987bf78296535df6778 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-19IPSEC: ESP IPv6 transport mode payload length incorrect (VPP-1653)Neale Ranns1-1/+3
Change-Id: I8977100d7a22b50260858bd1ea9db419b53284ff Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-16IPSEC: support GCM in ESPNeale Ranns1-0/+15
Change-Id: Id2ddb77b4ec3dd543d6e638bc882923f2bac011d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-11IPSEC: ESP with ESN tests and fixesNeale Ranns1-1/+1
Change-Id: Ie42b26e6d5cdb7b23f370ea2933c65079e8d1089 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-11IPSEC-MB: Use random & non-repeating IV (VPP-1642)Neale Ranns1-2/+0
hard code IV and key lengths based on cipher. Init IV from random data, use AES instruction to rotate. Change-Id: I13a6507d12267b823c528660a903787baeba47a0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-10crypto: Intel IPSEC-MB engineNeale Ranns1-0/+2
A plugin to use Intel IPSec MB library as a VPP crypto engine This changes uses concepts from: https://gerrit.fd.io/r/#/c/17301/ hence that author's work is acknowledge below Change-Id: I2bf3beeb10f3c9706fa5efbdc9bc023e310f5a92 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-04-07crypto: add support for AEAD and AES-GCMDamjan Marion1-7/+6
Change-Id: Iff6f81a49b9cff5522fbb4914d47472423eac5db Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-04ipsec: trunc_size -> icv_sizeDamjan Marion1-1/+1
Change-Id: Idb661261c2191adda963a7815822fd7a27a9e7a0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-02IPSEC: remove pointless feature orderingNeale Ranns1-4/+2
Change-Id: Ic1b657794d23cb4d1664fc749ad2468339e376df Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-29IPSEC: tunnel fragmentationNeale Ranns1-0/+10
Change-Id: I63741a22bc82f5f861e1c0f26a93b5569cc52061 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28crypto: add vnet_crypto_op_init (...)Damjan Marion1-3/+2
Change-Id: I2018d8367bb010e1ab30d9c7c23d9501fc38a2e5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28ipsec: USE_EXTENDED_SEQ_NUM -> USE_ESNDamjan Marion1-1/+1
Change-Id: Ib828ea5106f3ae280e4ce233f2462dee363580b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28IPSEC: 4o6 and 6o4 for tunnel interfacesNeale Ranns1-2/+4
Change-Id: I4d3ba18ab5205317219989de55b6e50d3b1d8a79 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28IPSEC: run encrpyt as a feautre on the tunnelNeale Ranns1-6/+75
Change-Id: I6527e3fd8bbbca2d5f728621fc66b3856b39d505 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-27ipsec: compress ipsec_sa_t so data used by dataplane code fits in cachelineDamjan Marion1-6/+6
Change-Id: I81ecdf9fdcfcb017117b47dc031f93208e004d7c Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-26ipsec: esp-encrypt reworkDamjan Marion1-241/+337
Change-Id: Ibe7f806b9d600994e83c9f1be526fdb0a1ef1833 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-20ipsec: keep crypto data inside SADamjan Marion1-17/+9
Change-Id: Ie8986bd3652d25c4befe681cea77df95aba37ebc Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-19crypto: introduce crypto infraDamjan Marion1-31/+22
Change-Id: Ibf320b3e7b054b686f3af9a55afd5d5bda9b1048 Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-06ipsec: esp-encrypt and esp-decrypt cleanupDamjan Marion1-283/+240
Change-Id: I1e431aa36a282ca7565c6618a940d591674b8cd2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-05ipsec: cleanup, remove unnecessary code,Kingwel Xie1-4/+0
ipsec_proto_main moved to ipsec.c fix missing '\0' of backend name Change-Id: I90760b3045973a46792c2f098d9b0b1b3d209ad0 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2019-02-18IPSEC: move SA counters into the stats segmentNeale Ranns1-2/+6
1) stats are accessed via the stat segment which is more condusive to monitoring 2) stats are accurate in the presence of multiple threads. There's no guarantee that an SA is access from only one worker. Change-Id: Id5e217ea253ddfc9480aaedb0d008dea031b1148 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-14Add -fno-common compile optionBenoît Ganne1-0/+2
-fno-common makes sure we do not have multiple declarations of the same global symbol across compilation units. It helps debug nasty linkage bugs by guaranteeing that all reference to a global symbol use the same underlying object. It also helps avoiding benign mistakes such as declaring enum as global objects instead of types in headers (hence the minor fixes scattered across the source). Change-Id: I55c16406dc54ff8a6860238b90ca990fa6b179f1 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-02-07IPSEC: no second lookup after tunnel encapNeale Ranns1-13/+17
in the same maaner as with other tunnel tyeps we use the FIB to cache and track the destination used to reach the tunnel endpoint. Post encap we can then ship the packet straight to this adjacency and thus elide the costly second lookup. - SA add and del function so they can be used both directly from the API and for tunnels. - API change for the SA dump to use the SA type - ipsec_key_t type for convenience (copying, [un]formating) - no matching tunnel counters in ipsec-if-input Change-Id: I9d144a59667f7bf96442f4ca66bef5c1d3c7f1ea Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-11Add IPSec interface FIB index for TX packetPierre Pfister1-2/+2
This patch adds a configuration parameter to IPSec tunnels, enabling custom FIB selection for encapsulated packets. Although this option could also be used for policy-based IPSec, this change only enables it for virtual-tunnel-interface mode. Note that this patch does change the API default behavior regarding TX fib selection for encapsulated packets. Previous behavior was to use the same FIB after and before encap. The new default behavior consists in using the FIB 0 as default. Change-Id: I5c212af909940a8cf6c7e3971bdc7623a2296452 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2018-12-11Fix [csit-dev] CSIT IPv6 IPSec transport mode tests are failingjackiechen19851-1/+9
Change-Id: I7893a8fd5b3e15063675597c0e9bd1cd0b49ef0e Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
2018-12-07Fix VPP-1515 IPSec receive packet error in transport mode with udp encapjackiechen19851-1/+1
Change-Id: Ife66395b89e1e9f9206666e5f0fd441b3c241bb2 Signed-off-by: jackiechen1985 <xiaobo.chen@tieto.com>
2018-12-04ipsec: simplify bumping counters - cosmetic changeKlement Sekera1-22/+7
Change-Id: Ibb55427ed49d0277854a352922c6c4bb007bf072 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach1-5/+5
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-13ipsec: fix typoKlement Sekera1-1/+1
Change-Id: I04c59bbe1780e7289cb27a0a912803812fdc297e Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-10-29migrate ipsec to new multiarch infraKlement Sekera1-11/+6
Change-Id: Ibef46e068cd72415af28920b0146adf48105bf68 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-10-22ipsec: split ipsec nodes into ip4/ip6 nodesKlement Sekera1-26/+69
Change-Id: Ic6b27659f1fe9e8df39e80a0441305e4e952195a Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-07-11avoid using thread local storage for thread indexDamjan Marion1-4/+4
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-04fix VPP-1312 Invalid UDP packet length in ipsecKlement Sekera1-1/+2
Change-Id: Ibfd0a2e7010e6e74c32244c538f60e0713bea03f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-05-09ipsec: support UDP encap/decap for NAT traversalKlement Sekera1-24/+50
Change-Id: I65c12617ad49e4d5ef242e53988782f0cefa5684 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-11-29DES-CBC/3DES-CBC support for VPP IPSec Core“mukeshyadav1984”1-13/+19
Change-Id: I876f215b129e5e59d3acc6447ce40458cc341eba Signed-off-by: “mukeshyadav1984” <mukyadav@cisco.com>
2017-11-28IPSec AH protocol enhancement in VPP native core“mukeshyadav1984”1-4/+5
Change-Id: Iec5804d768485f4015bbf732d8d19ef2f24e6939 Signed-off-by: “mukeshyadav1984” <mukyadav@cisco.com>
2017-11-10Allow Openssl 1.1.0Marco Varlese1-0/+4
This patch addresses all the code changes required to VPP to support openssl 1.1.0 API. All the changes have been done so that VPP can still be built against current openssl API whilst forward-looking to version 1.1.0. Change-Id: I65e22c53c5decde7a15c7eb78a62951ee246b8dc Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-10-24Add extern to *_main global variable declarations in header files.Dave Wallace1-0/+1
- Global variables declared in header files without the use of the 'extern' keword will result in multiple instances of the variable to be created by the compiler -- one for each different source file in which the the header file is included. This results in wasted memory allocated in the BSS segments as well as potentially introducing bugs in the application. Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-6/+7
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-17Implemented IKEv2 initiator features:Radu Nicolau1-0/+2
- IKE_SA_INIT and IKE_AUTH initial exchanges - Delete IKA SA - Rekey and delete Child SA - Child SAs lifetime policy To set up one VPP instance as the initiator use the following CLI commands (or API equivalents): ikev2 profile set <id> responder <interface> <addr> ikev2 profile set <id> ike-crypto-alg <crypto alg> <key size> ike-integ-alg <integ alg> ike-dh <dh type> ikev2 profile set <id> esp-crypto-alg <crypto alg> <key size> esp-integ-alg <integ alg> esp-dh <dh type> ikev2 profile set <id> sa-lifetime <seconds> <jitter> <handover> <max bytes> and finally ikev2 initiate sa-init <profile id> to initiate the IKE_SA_INIT exchange Child SA re-keying process: 1. Child SA expires 2. A new Child SA is created using the Child SA rekey exchange 3. For a set time both SAs are alive 4. After the set time interval expires old SA is deleted Any additional settings will not be carried over (i.e. settings of the ipsec<x> interface associated with the Child SA) CLI API additions: ikev2 profile set <id> responder <interface> <addr> ikev2 profile set <id> ike-crypto-alg <crypto alg> <key size> ike-integ-alg <integ alg> ike-dh <dh type> ikev2 profile set <id> esp-crypto-alg <crypto alg> <key size> esp-integ-alg <integ alg> esp-dh <dh type> ikev2 profile set <id> sa-lifetime <seconds> <jitter> <handover> <max bytes> ikev2 initiate sa-init <profile id> ikev2 initiate del-child-sa <child sa ispi> ikev2 initiate del-sa <sa ispi> ikev2 initiate rekey-child-sa <profile id> <child sa ispi> Sample configurations: Responder: ikev2 profile add pr1 ikev2 profile set pr1 auth shared-key-mic string Vpp123 ikev2 profile set pr1 id local fqdn vpp.home.responder ikev2 profile set pr1 id remote fqdn vpp.home.initiator ikev2 profile set pr1 traffic-selector remote ip-range 192.168.125.0 - 192.168.125.255 port-range 0 - 65535 protocol 0 ikev2 profile set pr1 traffic-selector local ip-range 192.168.124.0 - 192.168.124.255 port-range 0 - 65535 protocol 0 Initiator: ikev2 profile add pr1 ikev2 profile set pr1 auth shared-key-mic string Vpp123 ikev2 profile set pr1 id local fqdn vpp.home.initiator ikev2 profile set pr1 id remote fqdn vpp.home.responder ikev2 profile set pr1 traffic-selector local ip-range 192.168.125.0 - 192.168.125.255 port-range 0 - 65535 protocol 0 ikev2 profile set pr1 traffic-selector remote ip-range 192.168.124.0 - 192.168.124.255 port-range 0 - 65535 protocol 0 ikev2 profile set pr1 responder TenGigabitEthernet3/0/1 192.168.40.20 ikev2 profile set pr1 ike-crypto-alg aes-cbc 192 ike-integ-alg sha1-96 ike-dh modp-2048 ikev2 profile set pr1 esp-crypto-alg aes-cbc 192 esp-integ-alg sha1-96 esp-dh ecp-256 ikev2 profile set pr1 sa-lifetime 3600 10 5 0 Change-Id: I1db9084dc787129ea61298223fb7585a6f7eaf9e Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+425
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>