aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/ipsec/esp_encrypt.c
AgeCommit message (Collapse)AuthorFilesLines
2020-08-20ipsec: fix esp paddingMilan Lenco1-1/+1
Type: fix Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech> Change-Id: Ic8db52b41d7e5af3425099f008984e50afb3da74
2020-05-24ipsec: fixed chaining ops after add footer and icvPiotrX Kleski1-8/+11
In case there is no free space in first buffer for ICV and footer, additional buffer will be added, but esp_encrypt will stay in single buffer mode. The issue happens for the following payload sizes: - TCP packets with payload 1992 - ICMP packets with payload 2004 This fix moves the single/chained buffer ops selection to after esp_add_footer_and_icv call. Type: fix Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com> Change-Id: Ic5ceba418f738933f96edb3e489ca2d149033b79
2020-05-13ipsec: Support 4o6 and 6o4 for SPD tunnel mode SAsNeale Ranns1-34/+42
Type: feature the es4-encrypt and esp6-encrypt nodes need to be siblings so they both have the same edges for the DPO on which the tunnel mode SA stacks. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I2126589135a1df6c95ee14503dfde9ff406df60a
2020-05-04fib: midchain adjacency optimisationsNeale Ranns1-68/+11
Type: improvement - inline some common encap fixup functions into the midchain rewrite node so we don't incur the cost of the virtual function call - change the copy 'guess' from ethernet_header (which will never happen) to an ip4 header - add adj-midchain-tx to multiarch sources - don't run adj-midchain-tx as a feature, instead put this node as the adj's next and at the end of the feature arc. - cache the feature arc config index (to save the cache miss going to fetch it) - don't check if features are enabled when taking the arc (since we know they are) the last two changes will also benefit normal adjacencies taking the arc (i.e. for NAT, ACLs, etc) for IPSec: - don't run esp_encrypt as a feature, instead when required insert this node into the adj's next and into the end of the feature arc. this implies that encrypt is always 'the last feature' run, which is symmetric with decrypt always being the first. - esp_encrpyt for tunnels has adj-midchain-tx as next node Change-Id: Ida0af56a704302cf2d7797ded5f118a781e8acb7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-04-30crypto: introduce async crypto infraFan Zhang1-134/+537
Type: feature Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Signed-off-by: Dariusz Kazimierski <dariuszx.kazimierski@intel.com> Signed-off-by: Piotr Kleski <piotrx.kleski@intel.com> Change-Id: I4c3fcccf55c36842b7b48aed260fef2802b5c54b
2020-03-31ipsec: fix chained ESPFilip Tehlar1-14/+25
This fixes a special case when buffer chain enters decrypt node and becomes a single buffer after decryption. Type: fix Change-Id: Id5da9e8a074f83ec3561949631ce613f35528312 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-03-31ipsec: fix udp-encap in transport modeAlexander Chernavin1-1/+7
Now UDP enacapsulation doesn't work in transport mode with crypto algorithms that have iv_sz=8 like AES GCM or 3DES CBC. That happens because the inserted UDP header overlaps with the old IP header and gets filled before the information from the old IP header can be copied to a new IP header. The result is a broken packet: 00:03:39:620863: esp4-encrypt-tun esp: sa-index 3 spi 3464048590 (0xce792fce) seq 31 sa-seq-hi 0 crypto aes-gcm-128 integrity none udp-encap-enabled 00:03:39:620867: adj-midchain-tx ... 00:03:39:620868: ip4-rewrite ... 00:03:39:620869: GigabitEthernet0/8/0-output GigabitEthernet0/8/0 IP4: 08:00:27:a9:6b:d6 -> 08:00:27:5a:dd:0c UDP: 10.255.0.10 -> 10.255.0.20 version 0, header length 0 tos 0x80, ttl 63, length 0, checksum 0x653e (should be 0xffff) dscp CS4 ecn NON_ECN fragment id 0x0000 UDP: 128 -> 0 length 0, checksum 0x0000 00:03:39:620870: GigabitEthernet0/8/0-tx GigabitEthernet0/8/0 tx queue 0 ... IP4: 08:00:27:a9:6b:d6 -> 08:00:27:5a:dd:0c UDP: 10.255.0.10 -> 10.255.0.20 version 0, header length 0 tos 0x80, ttl 63, length 0, checksum 0x653e (should be 0xffff) dscp CS4 ecn NON_ECN fragment id 0x0000 UDP: 128 -> 0 length 0, checksum 0x0000 With this commit, fill UDP header after copying the IP headers in transport mode. Type: fix Change-Id: Ie9a6e562aa05a8378114329d6a9ff395189fa6a8 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2020-03-23ipsec: Revert "ipsec: fix chained ESP"Florin Coras1-25/+14
This reverts commit c2c1bfd9b72aec88526c06479b128725eb525866. Reason for revert: Seems it's breaking ipsec esp tests Type: fix Change-Id: Iac590eee23cbf92a10c62dafa789aa9c3b2284dd Signed-off-by: Florin Coras <fcoras@cisco.com>
2020-03-23ipsec: fix chained ESPFilip Tehlar1-14/+25
This fixes a special case when buffer chain enters decrypt node and becomes a single buffer after decryption. Type: fix Change-Id: I1d4da029b952baa97400adb7173aa63fd97d916b Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-02-25feature: provide a u16 version of vnet_feature_nextNeale Ranns1-3/+1
Type: improvement when using vlib_buffer_enqueue_to_next the 'nexts' parameter is an array of u16, but vnet_feautre_next takes a u32. this is a simple wrapper to address the impedence mismatch. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I0fa86629e979e313344eb68442dc35a7b9537a8f
2020-02-21ipsec: IPSec protection for multi-point tunnel interfacesNeale Ranns1-5/+6
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Iaba2ab11bfaa1c8db4023434e3043ac39500f938
2020-02-11ipsec: add support for chained buffersFilip Tehlar1-22/+161
Type: feature Change-Id: Ie072a7c2bbb1e4a77f7001754f01897efd30fc53 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-01-04ipsec: Targeted unit testingNeale Ranns1-11/+23
Type: fix 1 - big packets; chained buffers and those without enoguh space to add ESP header 2 - IPv6 extension headers in packets that are encrypted/decrypted 3 - Interface protection with SAs that have null algorithms Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ie330861fb06a9b248d9dcd5c730e21326ac8e973
2019-12-23ipsec: Test and fix IPSec worker hand-offNeale Ranns1-2/+2
Type: fix Change-Id: I5cb9a3845ddbc5f4de4eb4e9c481f606fe5cec9a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-17ipsec: bind an SA to a workerNeale Ranns1-11/+35
the sequence number increment and the anti-replay window checks must be atomic. Given the vector nature of VPP we can't simply use atomic increments for sequence numbers, since a vector on thread 1 with lower sequence numbers could be 'overtaken' by packets on thread 2 with higher sequence numbers. The anti-replay logic requires a critical section, not just atomics, and we don't want that. So when the SA see the first packet it is bound to that worker all subsequent packets, that arrive on a different worker, are subject to a handoff. Type: feature Change-Id: Ia20a8645fb50622ea6235ab015a537f033d531a4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-09ipsec: make sure pad_bytes does not exceed pad data sizeBenoît Ganne1-1/+5
This helps GCC understand the memcpy will not overflow pad_data. GCC-6 (default on Debian 9) in particular got confused. Type: fix Change-Id: I176eb01531b9d5c7ebec40f015e510b2d56e77c4 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-11-22ipsec: fix trailing data overflowFilip Tehlar1-23/+21
IPsec writes trailing data at the end of the buffer without checking if there is enough space. If the packet length equals buffer size this leads to rewiting of the next buffer header in the pool. Type: fix Change-Id: Iceb27bb724c7243863a4b532aad0808051b7d74c Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-09-27ipsec: support 4o6 and 6o4 for tunnel protectNeale Ranns1-0/+15
Type: feature Change-Id: Ib2352ca4c7abf4645f21fa16aaaf27408890a2bf Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-24ipsec: GCM, Anti-replay and ESN fixessNeale Ranns1-3/+6
Type: fix Several Fixes: 1 - Anti-replay did not work with GCM becuase it overwrote the sequence number in the ESP header. To fix i added the seq num to the per-packet data so it is preserved 2 - The high sequence number was not byte swapped during ESP encrypt. 3 - openssl engine was the only one to return FAIL_DECRYPT for bad GCM the others return BAD_HMAC. removed the former 4 - improved tracing to show the low and high seq numbers 5 - documented the anti-replay window checks 6 - fixed scapy patch for ESN support for GCM 7 - tests for anti-reply (w/ and w/o ESN) for each crypto algo Change-Id: Id65d96b6d1d4dd821b2ab557e87468fff6d70e5b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-12ipsec: drop outbound ESP when no crypto alg setMatthew Smith1-0/+131
Type: fix If a tunnel interface has the crypto alg set on the outbound SA to IPSEC_CRYPTO_ALG_NONE and packets are sent out that interface, the attempt to write an ESP trailer on the packet occurs at the wrong offset and the vnet buffer opaque data is corrupted, which can result in a SEGV when a subsequent node attempts to use that data. When an outbound SA is set on a tunnel interface which has no crypto alg set, add a node to the ip{4,6}-output feature arcs which drops all packets leaving that interface instead of adding the node which would try to encrypt the packets. Change-Id: Ie0ac8d8fdc8a035ab8bb83b72b6a94161bebaa48 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-06-25ipsec: print spi in hexadecimalGuillaume Solignac1-5/+6
Print the SPI in hexadecimal and decimal. Type: feature Change-Id: I012e94f9147058064e06c6bb4622ab6b6507957d Signed-off-by: Guillaume Solignac <gsoligna@cisco.com>
2019-06-18ipsec: ipsec-tun protectNeale Ranns1-6/+20
please consult the new tunnel proposal at: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-17ipsec: One DPO per SANeale Ranns1-1/+1
An SA can be used only for ESP or AH nver both, so it needs only one coresponding DPO. Type: refactor Change-Id: I689060f795ee352245a0eaed0890a6b234c63d71 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-05ipsec: fix sa counters in esp-encryptDamjan Marion1-4/+7
Type: fix Fixes: c59b9a2 Change-Id: I6021e67196a4d31ab11d4e3cfbda34b678150701 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-01esp_encrypt: remove unnecessary codeZhiyong Yang1-1/+1
Change-Id: I2d7e873fca6ab266af75814fac5d4cb5cda93cef Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-04-26crypto, ipsec: change GCM IV handlingDamjan Marion1-3/+20
- nonce construction out of salt and iv is ipsec specific so it should be handled in ipsec code - fixes GCM unit tests - GCM IV is constructed out of simple counter, per RFC4106 section 3.1 Change-Id: Ib7712cc9612830daa737f5171d8384f1d361bb61 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-25crypto: improve key handlingDamjan Marion1-3/+2
Change-Id: If96f661d507305da4b96cac7b1a8f14ba90676ad Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-19IPSEC: IPv6 ESP transport mode incorrect packet length and checksum (VPP-1654)Neale Ranns1-7/+14
Change-Id: Ia3474e5bfea5764eae9b2987bf78296535df6778 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-19IPSEC: ESP IPv6 transport mode payload length incorrect (VPP-1653)Neale Ranns1-1/+3
Change-Id: I8977100d7a22b50260858bd1ea9db419b53284ff Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-16IPSEC: support GCM in ESPNeale Ranns1-0/+15
Change-Id: Id2ddb77b4ec3dd543d6e638bc882923f2bac011d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-11IPSEC: ESP with ESN tests and fixesNeale Ranns1-1/+1
Change-Id: Ie42b26e6d5cdb7b23f370ea2933c65079e8d1089 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-11IPSEC-MB: Use random & non-repeating IV (VPP-1642)Neale Ranns1-2/+0
hard code IV and key lengths based on cipher. Init IV from random data, use AES instruction to rotate. Change-Id: I13a6507d12267b823c528660a903787baeba47a0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-10crypto: Intel IPSEC-MB engineNeale Ranns1-0/+2
A plugin to use Intel IPSec MB library as a VPP crypto engine This changes uses concepts from: https://gerrit.fd.io/r/#/c/17301/ hence that author's work is acknowledge below Change-Id: I2bf3beeb10f3c9706fa5efbdc9bc023e310f5a92 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-04-07crypto: add support for AEAD and AES-GCMDamjan Marion1-7/+6
Change-Id: Iff6f81a49b9cff5522fbb4914d47472423eac5db Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-04ipsec: trunc_size -> icv_sizeDamjan Marion1-1/+1
Change-Id: Idb661261c2191adda963a7815822fd7a27a9e7a0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-02IPSEC: remove pointless feature orderingNeale Ranns1-4/+2
Change-Id: Ic1b657794d23cb4d1664fc749ad2468339e376df Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-29IPSEC: tunnel fragmentationNeale Ranns1-0/+10
Change-Id: I63741a22bc82f5f861e1c0f26a93b5569cc52061 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28crypto: add vnet_crypto_op_init (...)Damjan Marion1-3/+2
Change-Id: I2018d8367bb010e1ab30d9c7c23d9501fc38a2e5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28ipsec: USE_EXTENDED_SEQ_NUM -> USE_ESNDamjan Marion1-1/+1
Change-Id: Ib828ea5106f3ae280e4ce233f2462dee363580b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28IPSEC: 4o6 and 6o4 for tunnel interfacesNeale Ranns1-2/+4
Change-Id: I4d3ba18ab5205317219989de55b6e50d3b1d8a79 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28IPSEC: run encrpyt as a feautre on the tunnelNeale Ranns1-6/+75
Change-Id: I6527e3fd8bbbca2d5f728621fc66b3856b39d505 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-27ipsec: compress ipsec_sa_t so data used by dataplane code fits in cachelineDamjan Marion1-6/+6
Change-Id: I81ecdf9fdcfcb017117b47dc031f93208e004d7c Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-26ipsec: esp-encrypt reworkDamjan Marion1-241/+337
Change-Id: Ibe7f806b9d600994e83c9f1be526fdb0a1ef1833 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-20ipsec: keep crypto data inside SADamjan Marion1-17/+9
Change-Id: Ie8986bd3652d25c4befe681cea77df95aba37ebc Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-19crypto: introduce crypto infraDamjan Marion1-31/+22
Change-Id: Ibf320b3e7b054b686f3af9a55afd5d5bda9b1048 Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-06ipsec: esp-encrypt and esp-decrypt cleanupDamjan Marion1-283/+240
Change-Id: I1e431aa36a282ca7565c6618a940d591674b8cd2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-05ipsec: cleanup, remove unnecessary code,Kingwel Xie1-4/+0
ipsec_proto_main moved to ipsec.c fix missing '\0' of backend name Change-Id: I90760b3045973a46792c2f098d9b0b1b3d209ad0 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2019-02-18IPSEC: move SA counters into the stats segmentNeale Ranns1-2/+6
1) stats are accessed via the stat segment which is more condusive to monitoring 2) stats are accurate in the presence of multiple threads. There's no guarantee that an SA is access from only one worker. Change-Id: Id5e217ea253ddfc9480aaedb0d008dea031b1148 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-14Add -fno-common compile optionBenoît Ganne1-0/+2
-fno-common makes sure we do not have multiple declarations of the same global symbol across compilation units. It helps debug nasty linkage bugs by guaranteeing that all reference to a global symbol use the same underlying object. It also helps avoiding benign mistakes such as declaring enum as global objects instead of types in headers (hence the minor fixes scattered across the source). Change-Id: I55c16406dc54ff8a6860238b90ca990fa6b179f1 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-02-07IPSEC: no second lookup after tunnel encapNeale Ranns1-13/+17
in the same maaner as with other tunnel tyeps we use the FIB to cache and track the destination used to reach the tunnel endpoint. Post encap we can then ship the packet straight to this adjacency and thus elide the costly second lookup. - SA add and del function so they can be used both directly from the API and for tunnels. - API change for the SA dump to use the SA type - ipsec_key_t type for convenience (copying, [un]formating) - no matching tunnel counters in ipsec-if-input Change-Id: I9d144a59667f7bf96442f4ca66bef5c1d3c7f1ea Signed-off-by: Neale Ranns <nranns@cisco.com>