summaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2021-12-08session: fix duplicate segment del messageFlorin Coras1-6/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I42b5a5a07aae6708a20ed424c8f26ddbe91278fb
2021-12-07fib: fix coverity warning/don't dereference NULLKlement Sekera1-1/+1
fib_sas6_get is called with NULL dst explicitly so add a NULL check to avoid a NULL dereference. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I8ebcba98832f374991f5442c1b83a4b6e64771d0
2021-12-04ipsec: fix async buffer leakMatthew Smith3-3/+2
Type: fix Fixes: f16e9a5507 If an attempt to submit an async crypto frame fails, the buffers that were added to the frame are supposed to be dropped. This was not happening and they are leaking, resulting in buffer exhaustion. There are two issues: 1. The return value of esp_async_recycle_failed_submit() is used to figure out how many buffers should be dropped. That function calls vnet_crypto_async_reset_frame() and then returns f->n_elts. Resetting the frame sets n_elts to 0. So esp_async_recycle_failed_submit() always returns 0. It is safe to remove the call to reset the frame because esp_async_recycle_failed_submit() is called in 2 places and a call to reset the frame is made immediately afterwards in both cases - so it is currently unnecessary anyway. 2. An array and an index are passed to esp_async_recycle_failed_submit(). The index should indicate the position in the array where indices of the buffers contained in the frame should be written. Across multiple calls, the same index value (n_sync) is passed. This means each call may overwrite the same entries in the array with the buffer indices in the frame rather than appending them to the entries which were written earlier. Pass n_noop as the index instead of n_sync. Change-Id: I525ab3c466965446f6c116f4c8c5ebb678a66d84 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-12-03interface: add multi tx-queues support for new tx infraMohsin Kazmi14-136/+867
Type: feature Change-Id: I231f782b3c56dc2b10321e4569ac7acdad1c11da Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-12-03ip: extension header parsing fails for fragment headerOle Troan8-294/+277
Refactor and improve boundary checking on IPv6 extension header handling. Limit parsing of IPv6 extension headers to a maximum of 4 headers and a depth of 256 bytes. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ide40aaa2b482ceef7e92f02fa0caeadb3b8f7556 Signed-off-by: Ole Troan <ot@cisco.com>
2021-12-03fib: Fix the display (or lack of) for fib node types in dependent children listsNeale Ranns4-22/+37
Type: fix When registering a new FIB node type, no name was required on the API, and so no name was printed. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8a99cf29c194637a550061b0a5e9782ffe8b31dd
2021-11-30interface: add support for outer header checksumsMohsin Kazmi3-0/+43
Type: improvement Change-Id: I7c341dc4a99898dd1f865ac2ebd99de9898bb0bd Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-11-29session: remove segment if empty after writer lockFlorin Coras1-9/+18
Make sure segment is empty after writer lock acquired. Other workers might add fifos in between empty test and writer lock acquire. Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I3400fdd14be98d9d8fb4e415d3a849be1d255241
2021-11-29session: mark first listener segment as protectedFlorin Coras1-0/+4
Avoid constantly re-mapping a listener's first segment when all its sessions are closed. Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Iea7033fb70f4cf9e4408d542b7c0ff2b0c5c2f92
2021-11-29session: no deq notifications after closeFlorin Coras1-0/+2
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I3e633f017c68e8c5446e45b577048138a387daf6
2021-11-29session: postpone close notification if still acceptingFlorin Coras1-0/+14
Acceping sessions might be rejected so the notification might not make sense. Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I3ababdce7c2cec62941d9722a9c06fa48ec547db
2021-11-29ipfix-export: don't check the result of pool_getPaul Atkins1-2/+0
The code to check the exp is set after the call to pool_get() is marked as unreachable in coverity. This is becasue if it fails in pool_get then the it panics. Remove the unreachable code. Type: fix Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: Iabb51b6b6788b6c12ef37c28dde2118c798de831
2021-11-29session: fix clib_rwlock_writer_unlock lostwanghanlin1-1/+4
Type: fix Signed-off-by: wanghanlin <wanghanlin@corp.netease.com> Change-Id: Iab857b056639f7e513f87a6095bea081b7d8349c
2021-11-27devices: fix af_packet GSO checkNathan Skrzypczak1-1/+6
Type: fix This fixes the GSO size calculation in af_packet which didn't include the ethernet size. This is not ideal, as we default to the host side mtu to check whether a packet is GSO or not and to set the GSO size. But there doesn't seem to be more info passed with the packets. Change-Id: I9769e1dd21d5989b4cf67295352b5535454f88d1 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-11-26session: accept reply improvementsFlorin Coras1-26/+25
- Always check session ownership - Improve test for main thread rpc Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I5fa60f7f5de199af0966987f9ce9a4cc8180cf98
2021-11-26session: postpone ct peer disconnect and more checksFlorin Coras1-20/+29
- Disconnect ct peer only after tx events have been drained - Make sure session/connection is in healty state before rx/tx notifications Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ic6e684410a98530cc95a9c6c54c05a19c17c11d9
2021-11-26session: only notify server on ct connect failureFlorin Coras1-8/+14
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ifcb631ed2913e5f4fc318238de9100286a7990d2
2021-11-25l2: change prefetch to prefetchwRay Kinsella1-4/+4
L2 prefetches the vlib_buffer_t and then immediately writes to l2 split horizon group. Changing to the prefetch to a prefetchw. Type: improvement Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: If3b7996978ee80f99c55904692c7b3c905f537ce
2021-11-24session: improve fifo segment allocationFilip Tehlar1-0/+6
This patch ensures that fifo segment has at least the size that was requested during allocation. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Iea8a885ac290183e25e5c8f9163bba226c5efa15
2021-11-24session: detach server from client on connect failureFlorin Coras1-0/+2
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ie2ed2554578d6a2c671c552dc2bdc081f9754eed
2021-11-23misc: deprecate gbp and its dependentsNeale Ranns15-3724/+3
Type: improvement Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Benoît Ganne <bganne@cisco.com> Change-Id: I2f30a4f04fd9a8635ce2d259b5fd5b0c85cee8c3
2021-11-23vxlan: multiarch optimization of vxlanRay Kinsella3-5/+1
Fixing the mutliarch versions of vxlan, geneve and friends. Ensures that main struct is correctly sized for all multiarch permutations. Type: fix Fixes: 290526e3c Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I7c4c435763a5dcb0c3b429cd4f361d373d480c03
2021-11-23devices: support build on older kernelsFlorin Coras1-0/+3
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I10af028b5e57b36b8015b02240f1e4e9a42d0898
2021-11-23ip: unlock_fib on if deleteNathan Skrzypczak4-54/+99
On interface delete we were not removing the lock taken by a previous ip_table_bind() call thus preventing the VRFs to be removed. Type: fix Change-Id: I11abbb51a09b45cd3390b23d5d601d029c5ea485 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-11-22gso: implement gso segementation copy with checksumMohsin Kazmi2-15/+239
Type: improvement Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: Iec9dacde170533ca16e8117787e62da8af69ae96
2021-11-22ipfix-export: support sending of ipv6 pktsPaul Atkins1-62/+176
The current code that sends ipfix packets assumes IPv4. Modify this so that it generates and sends packets based on whether the destination address is IPv4 or IPv6. Where code is common across multiple places pull it out into helper functions. Type: improvement Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I216c6c4c1b58cacedca22019f74a38c64a368b7e
2021-11-22ipfix-export: Change exp to use ip_addressPaul Atkins4-62/+80
Modify the ipfix_exporter to use ip_address instead of the ipv4 specific version. Modify the current code so that it writes into the v4 specific part of the address, i.e. we are not yet fully supporting IPv6. For the exporter configured via the original API (the one that is always in slot0) we will not support IPv6 addresses. Type: improvement Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: Ic9854ac62aaee76a7a55a958234c456fd9828c4c
2021-11-22ipfix-export: rename variables when building bufsPaul Atkins1-40/+40
Rename the local variables used when building ipfix export packets to make it clear that they are v4 specific variables. Type: improvement Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I3a5a623aeb0b6f2b7fcdafb3fc19c500934c529b
2021-11-22ipfix-export: refactor params to the callback fnsPaul Atkins4-15/+7
When a new flow-report is created the caller provides 2 callback functions. These functions both take a pointer to the exporter, plus a pointer to the source and dest address. However the pointers to the address are not adding any value as these are always set to the src/dest addresses of the exporter (which is already being passed). Remove these parameters and leave the callback functions to get the addresses out of the exporter. Type: improvement Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I36dec394f30e85cdca120dd8706b5d90f5e07c48
2021-11-22ipfix-export: Add APIs to get/send buffersPaul Atkins3-0/+234
The ipfix exporter should be doing most of the work of building packets and sending them rather than leaving every client of the exporter to do all the work themselves. Start to move towards that by adding APIs to get and send buffers. Store the state of this in new per thread data on the report so that we can send with minimal use of atomics. We do need an atomic for the sequence number in the packet though as that contains the number of data_records sent for the 'stream', not just for a single core. As the state is stored on the flow_report_t the caller needs to know which report they are using, so add a field to the args struct used to create the report that is used to pass back the report index on success. Type: improvement Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I222b98a3f0326b3b71b11e0866a8c9736bed6dc1
2021-11-22ipfix-export: add a new API to dump all exportersPaul Atkins2-1/+86
Add a new API to dump all the exporters. As the destination struct type is not the same as for the existing dump/details API no attempt is made to use the existing code to populate the structure. Type: improvement Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I409f80285b107a530e0e4f3c6a047a803815a0ec
2021-11-22ipfix-export: support creating multiple exportersPaul Atkins4-45/+169
The existing api set_ipfix_exporter only allows for the creation of a single exporter. In some cases it is desirable to export data to multiple different destinations. Allow users to create multiple ipfix exporters to support this. Add a new api that allows for the creation of multiple exporters, and store them in a pool of exporters. The exporter created by the old API will always be in index 0 of the pool. Exporters created by the new API will be given the next available index in the pool, and will return this index to the API caller so that they can track the exporter they created. The collector_address is the key for the exporter, so changes can be made by doing a further call to the API with the same collector_address. Type: improvement Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: Id71c98cffcf8d141d890b40fb90a40b90a91d1d6
2021-11-22ipfix-export: refactor ipfix_exporter_t_handler fnPaul Atkins1-34/+34
Split this api handler into 2 parts. The first is the top level handler and the second is the internal helper function that does all the work. This is in preparation for having a similar API that allows multiple exporters to exist at the same time. Type: refactor Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: Ibd4037682742f4c2f52b4cd1346d35fb2029461d
2021-11-22ipfix-export: pass an exp to flow_report_add_delPaul Atkins5-73/+60
Pass an ipfix_exporter to this function so that callers can choose which exporter they are modifying. Type: improvement Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: Ice0ed19a57baf15b1dc85cd27fe01913e36d7f4f
2021-11-22ipfix-export: make stream fns exporter awarePaul Atkins1-18/+11
The functions that work on streams were getting the set of streams directly from flow_report_main. Modify them to take an ipfix_exporter as an argument, and then any processing they do is only for this exporter. Type: refactor Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I32bd9a6ba32a15ec4d4ec9556a9b75f3d83fcd6e
2021-11-22ipfix-export: refactor fields in flow_report_mainPaul Atkins4-87/+125
Pull out the fields in flow_report_main_t that are specific to a single exporter and move them into a new structure that represents an exporter. Add a pool of exporters to flow_report_main_t and do a pool_get() to get the entry at index 0, so that the existing users of the code need only change the path at which they access the old fields and have no need to make further code changes. In functions that were accessing the fields that now make up the ipfix_exporter create a local var that points to the first (always valid) exporter and use this as the base for the fields rather than finding them from flow_report_main. This is in preparation for supporting multiple flow_exporters. Note that at the moment the code supports multiple 'streams' for a given exporter, where each stream has its own source port, domain id and template space. But all streams within an exporter have the same destination address, so this is not the same as multiple exporters. Type: refactor Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I49f5c7fb9e901773351d31dc8a59178c37e99301
2021-11-19tls: add option to config additional segment sizeFlorin Coras2-4/+9
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Idf3b49ec61bf5da498ffdd8cebab7148fce73f5f
2021-11-19fib: Don't use [midchain] adjacencies to change an interface's feature arcNeale Ranns24-291/+352
Type: fix Using the adjacency to modify the interface's feature arc doesn't work, since there are potentially more than one adj per-interface. Instead have the interface, when it is created, register what the end node of the feature arc is. This end node is then also used as the interface's tx node (i.e. it is used as the adjacency's next-node). rename adj-midhcain-tx as 'tunnel-output', that's a bit more intuitive. There's also a fix in config string handling to: 1- prevent false sharing of strings when the end node of the arc is different. 2- call registered listeners when the end node is changed For IPSec the consequences are that one cannot provide per-adjacency behaviour using different end-nodes - this was previously done for the no-SA and an SA with no protection. These cases are no handled in the esp-encrypt node. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: If3a83d03a3000f28820d9a9cb4101d244803d084
2021-11-18session: deprecate mq segments basevaFlorin Coras2-15/+2
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I5b6cb8dd9db7e003a470ca4aeb8472fa7cb9a128
2021-11-18session: improve wrk mq segment allocationFlorin Coras3-53/+62
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I9e5438a2f82762aa8a88bbacf4290151ef30969e
2021-11-18ip: comparing IP prefixes should not modify themNeale Ranns4-7/+33
Type: improvement make the ip_prefix_cmp take const paramenters. plus some other miscellaneous functions. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ib69bacfb09483a8a8f8b89900c92d3d55c354ac6
2021-11-17session: fix state check in switch poolFlorin Coras1-3/+3
This affect udp only Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I5e05e9c77b733b9e10c14cc9ef610c9bff216fa0
2021-11-17session: support close during migrationFlorin Coras2-9/+41
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ife1e046b62bb0679419fd1346e973d0e3ea55489
2021-11-17session: try to coalesce ct accept rpcsFlorin Coras1-7/+44
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I11de851949afd90a37c102ed0c00969a4cc73df4
2021-11-17ip6: ip6_not_enabled_node is a sibling of ip6-dropPaul Atkins1-6/+2
The node ip6_not_enabled should be marked as sibling of ip6-drop as both are start nodes of the ip6-drop arc. Type: fix Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I212c25444a81b11d8085ba7930ddb67b47502d5c
2021-11-17ipfix-export: remove unused code in flow_report.hPaul Atkins1-2/+0
There are no implementations for this function so remove it. Type: improvement Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I793b015ea1657edd1de719c2a574799aeb8b74d5
2021-11-17ipfix-export: tidy code style in flow_report.cPaul Atkins1-46/+46
Indent sections of code properly in vec_foreach loops. Type: style Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I90183ace164df753f3f47b6c4a6305ded21d744d
2021-11-17ipfix-export: set msg id correctly for dump msgPaul Atkins1-1/+2
When sending the reply to the VL_API_IPFIX_EXPORTER_DUMP message the message id has to be added to the message base. Type: fix Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I9565be7887046739b5f309e021f34ed75c9e370e
2021-11-16session: add per worker ct contextFlorin Coras1-26/+43
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ie20dc1e369735965bd780f04cd8703c099065fcc
2021-11-15session: postpone ct segment deleteFlorin Coras1-47/+70
Only delete segments only after both server and client detach. Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Idea6b2141f406aad1f19a5312ecea89d35f2b5de