Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: Ignas Bacius <ignas@noia.network>
Change-Id: Id99a15272f6f12a724a4cfd9de461f1aa6a6a634
|
|
Cleanup L2/L3 mode switch to not redirect to/from ethernet-input node
as it is no longer necessary.
L2 patch should use sw_if_index for device feature enable/disable.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I0f24161d027b07c188fd1e05276146f94c075710
|
|
Type: fix
Change-Id: Id6687780b9a740323bd2eef58447864e70dc0235
Signed-off-by: Ignas Bacius <ignas@noia.network>
|
|
Identified and removed executable bit from source files in the tree.
find . -perm 755 -name *.[ch] -exec chmod a-x {} \;
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I00710d59fcc46ce5be5233109af4c8077daff74b
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iae734a526d2e7befd9738054d028df0062b67000
|
|
Type: fix
Seems clang needs explicit casting to u64 of u64 and f64 multiplication
before truncating to u32
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib0d7a33d4c5e68577e401e854fc3e55e0723da93
|
|
Removing the comments around eid_type which seem to have been overlooked
by the original patch https://gerrit.fd.io/r/c/vpp/+/24663.
Type: refactor
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: I48e1993cf8869cb32e159d1956f3ec1e5943e33f
|
|
By storing thread and session index in hash table we are able to skip
multiple hash lookups in multi-worker scenario, which were used for
handoff before. Also, by storing sesion index in vnet_buffer2, we can
avoid repeating the lookup after handoff.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I406fb12f4e2dd8f4a5ca5d83d59dbc37e1af9abf
|
|
Type: fix
Signed-off-by: Ye donggang <yedg@wangsu.com>
Change-Id: Ia9f72ff2be455ecd4ff3d16e884c5a50f9df69fe
|
|
Calling ethernet_set_flags() to switch interface to/from promiscuous
mode must use use hw_if_index instead of sw_if_index.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I72da286b913893227e32193ee11fbbc56e04804d
|
|
Type: fix
... it's not a feature anymore
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ifbcaf7d832aa76336feb0556d0dc7d2002f19c35
|
|
Type: fix
In quad loop, checksum will be calculated for all four packets,
if one packet needs checksum computation, without respecting their
respective flags. This patch fixes it.
Change-Id: I479b420ba0dcbd178ea4180bf05a0e55a6b13843
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
it is possible for a user to change the end node of a feature arc, but
this change should only apply to that 'instnace' of the arc, not all
arcs. for example, if a tunnel has its ipx-output end node changed to
adj-midchain-tx, this shouldn't affect all ipx-output arcs. obviously...
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I41daea7ba6907963e42140307d065c8bcfdcb585
|
|
Type: fix
Only add GSO and Checksum offload flags when gso is
enabled.
Change-Id: I58945a4ffbb9a0e6a8640fc01424c63feef16306
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
the es4-encrypt and esp6-encrypt nodes need to be siblings so they both have the same edges for the DPO on which the tunnel mode SA stacks.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I2126589135a1df6c95ee14503dfde9ff406df60a
|
|
Type: fix
Change-Id: I14e323e7bb1db7a3d40668212535c07504374e59
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I84ec1c91a3a7b2195aad58923fa6f17f551444cb
|
|
Fix the issue that vppctl show ip4{6} neighbor [interface] command can't
show entries correctly, example: both ip4 and ip6 entries can be shown
with command:
vppctl show ip4 neighbor.
Type: fix
Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com>
Change-Id: I229368b71cd285adce994c8290cc9d7e4c4f5aa6
Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com>
|
|
Type: fix
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I617fb365def22a28d48f75013dea38f8e1703a44
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I20daa023eed50f8b42e8dc2d17e47a54aa16ae31
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4ac923fda84feee8d2ad76d0c3e3a252f53008ed
|
|
Type: docs
Change-Id: I9b5e5137eb4c1e89f6e8d7a278cd11a0fd496471
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Fix coverity issues in crypto framework and cryptodev
engine.
Type: fix
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: Ib261da0163c8182c803600db22c5a6dad5a19999
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I51660e4b02f449bd2db12a8cfd395c6c343d2dee
|
|
Type: feature
thus allowing NAT traversal,
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ie8650ceeb5074f98c68d2d90f6adc2f18afeba08
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: style
Change-Id: Iccd2c205059abcdf121093ff03da603fe3dda1f7
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Add an IP_ROUTE_LOOKUP function that does either an exact match or
longest prefix match in a given fib table for a given prefix
returning the match if present.
Add API test.
Type: improvement
Signed-off-by: Christian Hopps <chopps@labn.net>
Change-ID: I67ec5a61079f4acf1349a9c646185f91f5f11806
|
|
Type: feature
Change-Id: I37752af8496e0042a1da91124f3d94216b39ff11
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Binary API message handlers need to check sw_if_index
values.
Found in binary api fuzz testing.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I51e717e9260e58a4c36d4d95981fd001be594fed
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie47546ef36590b90ed481b14cf812afbecf7981c
|
|
Type: improvement
- inline some common encap fixup functions into the midchain
rewrite node so we don't incur the cost of the virtual function call
- change the copy 'guess' from ethernet_header (which will never happen) to an ip4 header
- add adj-midchain-tx to multiarch sources
- don't run adj-midchain-tx as a feature, instead put this node as the
adj's next and at the end of the feature arc.
- cache the feature arc config index (to save the cache miss going to fetch it)
- don't check if features are enabled when taking the arc (since we know they are)
the last two changes will also benefit normal adjacencies taking the arc (i.e. for NAT, ACLs, etc)
for IPSec:
- don't run esp_encrypt as a feature, instead when required insert this
node into the adj's next and into the end of the feature arc. this
implies that encrypt is always 'the last feature' run, which is
symmetric with decrypt always being the first.
- esp_encrpyt for tunnels has adj-midchain-tx as next node
Change-Id: Ida0af56a704302cf2d7797ded5f118a781e8acb7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I70c63db91c3512fb724bba4762e3ca1e369ca421
|
|
Add a hook to src/vlibapi/api_shared.c to fuzz (screw up) binary API
messages, e.g. by xoring random data into them before processing. We
specifically exempt client connection messages, and inband debug CLI
messages. We step over msg_id, client index, client context, and
sw_if_index. Otherwise, "make test" vectors fail too rapidly to learn
anything.
The goal is to reduce the number of crashes caused to zero. We're
fairly close with this patch.
Add vl_msg_api_max_length(void *mp), which returns the maximum
plausible length for a binary API message.
Use it to hardern vl_api_from_api_to_new_vec(...) which takes an
additional argument - message pointer - so it can verify that
astr->length is sane. If it's not sane, return a u8 *vector of the
form "insane astr->length nnnn\0".
Verify array lengths in vl_api_dhcp6_send_client_message_t_handler(...)
and vl_api_dhcp6_pd_send_client_message_t_handler(...).
Add a fairly effective binary API fuzz hook to the unittest plugin,
and modify the "make test" framework.py to pass "api-fuzz { on|off }"
to enable API fuzzing: "make API_FUZZ=on TEST=xxx test-debug" or similar
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I0157267652a163c01553d5267620f719cc6c3bde
|
|
Type: refactor
This patch refactor the existing flags and also add a new
flag for packet coalescing.
Change-Id: Ic826e4c81313f26d87c475cdf666b06cbed60a3a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I5e1f7c37d612f4666edf2262b457ae0e13f20791
Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
|
|
Type: feature
Change-Id: I6f607f383dc77a71e8712124f7613b38b4ac065a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ibf468970b56fc6bf8d5fb6ba491dd3e727464fc0
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie4b2bca3b6b0ca6097152aab232991ca7935e442
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1585af9e4f4273f055aed824b133ddc8eddd1df7
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I96509c274895b917c3e220204d7959d9270de30d
|
|
This patch adds the l2tpv3oip type flow support
Have tested on E810 with Intel iAVF driver
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Icb5114b5f70dd7a63f681e7c6ac802fade8b8cf1
|
|
Type: feature
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Dariusz Kazimierski <dariuszx.kazimierski@intel.com>
Signed-off-by: Piotr Kleski <piotrx.kleski@intel.com>
Change-Id: I4c3fcccf55c36842b7b48aed260fef2802b5c54b
|
|
Type: improvement
tap_delete_if() returns early if the interface type is not
VIRTIO_IF_TYPE_TAP. Allow VIRTIO_IF_TYPE_TUN also and take
appropriate action for those interfaces.
Change-Id: I196b6d6f3f5e1543a14d6be76fd879d44c9794fd
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Change-Id: I8d68e7c7392dcb748a2a84e72c7b1ca0c6c0eb07
Signed-off-by: Tom Seidenberg <tseidenb@cisco.com>
|
|
GCC-10 increases string truncations warnings. Refactor string copies
confusing it.
Type: refactor
Change-Id: I9720a0539059de00ab212ff2fc73055f04f5af1d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: Ib09c7cebb6978b3adc09ac36cb32f7947b143e51
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Unspecified c enums start at 0.
Unspecified api enums start at 1.
Type: fix
Change-Id: I431c11302c0ad897a968134ce90496af3db7bb86
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Calling vlib_time_now (&vlib_global_main) from a worker thread is a bad
mistake. ASSERT (vm->thread_index == __os_thread_index) will catch it.
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I55af6de84e06143f8f43adc62103b77267a7a441
|
|
This patch enables the RSS configuration through vnet/flow interface
With this RSS feature, users can config the RSS functions for specific flows
Currently, it supports:
default, toeplitz and symmetric_toeplitz rss function, and
ipv4-tcp/ipv4-udp/ipv6-tcp/ipv6-ucp flow types
Users can use the following options to combine with above flow
types for more specific hash input set selection:
l3-src-only, l3-dst-only, l4-src-only, l4-dst-only
Command line:
test flow add dst-ip any proto udp rss function default rss types ipv4-tcp use l3-dst-only
test flow add dst-ip any proto udp rss function toeplitz rss types ipv4-udp use l4-src-only
test flow add dst-ip any proto udp rss function symmetric_toeplitz rss types ipv6-udp use l3-src-only and l3-dst-only
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I213efc76dc8af37f2f63605884f353e05b0f5d2a
|
|
This matches vhost queues to linux netdev queues and avoids random
packet shuffling across vhost queues on rx.
Change-Id: I9901689d361e440fb0b91c9fbaf8124ce525b316
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|