aboutsummaryrefslogtreecommitdiffstats
path: root/test/test_ip4.py
AgeCommit message (Collapse)AuthorFilesLines
2018-05-23VPP-1283: IPv4 PMTU missing MTU value in ICMP4 message.Ole Troan1-1/+1
Change-Id: I7a4133c59ff45b0744b48e246a049d9f015026fc Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion1-1/+1
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan1-1/+1
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-12Improve MTU handlingNeale Ranns1-0/+26
- setting MTU on an interface updates the L3 max bytes too - value cached in the adjacency is also updated - MTU exceeded generates ICMP to sender Change-Id: I343ec71d8e903b529594c4bd0543f04bc7f370b3 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-01-09test: consolidate the multiple versions of send_and_*Neale Ranns1-73/+0
Change-Id: I7fa7d0ebf73dab8264a2e5ddbd412600d78ead05 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-11MPLS disposition actions at the tail of unicast LSPsNeale Ranns1-1/+0
Change-Id: I8c42e26152f2ed1246f91b789887bfc923418bdf Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-31Refactor IP input checks for re-use at MPLS dispositionNeale Ranns1-0/+135
Change-Id: I7aafdecd6f370411138e6ab67b2ff72cda6e0666 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-14Source Lookup progammable via APINeale Ranns1-1/+109
Change-Id: I5d5d4f22b6369d504455a644f73076d772fbcfb4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-10punt and drop features:Neale Ranns1-1/+111
- new IPv4 and IPv6 feature arcs on the punt and drop nodes - new features: - redirect punted traffic to an interface and nexthop - police punted traffic. Change-Id: I53be8bf4e06545add8a3619e462de5ffedd0a95c Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-3/+8
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-01Tests for recursive load-balancing with no choices.Neale Ranns1-5/+35
Change-Id: I90bb3369576741d03628a818ffa63cc99d6e4c98 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-06Packets recieved on VLAN-0 map to the main interfaceNeale Ranns1-0/+46
Change-Id: I21b1ad39275495d4d006023b58f630a213445854 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-25MPLS hash function improvementsNeale Ranns1-18/+43
Change-Id: I28e98f445c01493562b6196a4f5b532a51f178af Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-26IP Flow Hash Config fixesNeale Ranns1-0/+137
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table. - enable API for setting the IPv6 table flow hash config - use only the hash config in the fib_table_t object and not on the ipX_fib_t - add tests. Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-29Sub-net broadcast addresses for IPv4Neale Ranns1-1/+124
Change-Id: Ib2189d01e8bc61de57404159690fb70f89c47277 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Fix IP feature ordering.Neale Ranns1-1/+98
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features(). Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour. Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-09Tests to target holes in adjacency and DPO test coverageNeale Ranns1-1/+82
Change-Id: Ic6ac7e441a7b75baa02f03c1585d1ae00903a399 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-11make test: improve documentation and PEP8 complianceKlement Sekera1-7/+10
Change-Id: Ib4f0353aab6112fcc3c3d8f0bcbed5bc4b567b9b Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-23make test: improve handling of packet capturesKlement Sekera1-11/+8
Perform accounting of expected packets based on created packet infos. Use this accounting info to automatically expect (and verify) the correct number of packets to be captured. Automatically retry the read of the capture file if scapy raises an exception while doing so to handle rare cases when capture file is read while only partially written during busy wait. Don't fail assert_nothing_captured if only junk packets arrived. Change-Id: I16ec2e9410ef510d313ec16b7e13c57d0b2a63f5 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-09make test: FIB add/update/delete - ip4 routesMatej Klotton1-2/+266
- JIRA:CSIT-483 Change-Id: Idb4c5bd7a234bc975f3380ece58c0e8d4bfdafd9 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-12-05make test: fix missing log/packet messagesKlement Sekera1-7/+5
Change-Id: Idb3119792943664748c4abc3829ad723f4156dfe Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-11-15Update test documentation.Matej Klotton1-18/+60
- update IRB, IPv4, ipv6 doc - revert 778c2765c8ea5c6628f6d668847f0b9ae06dbf3d Change-Id: I9af5ed9329ce5fe01392cf28d5bf321cfc647e48 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-11-09Disable non-working checks in load-balancer test and rename ip->ip4Klement Sekera1-0/+165
Change-Id: If62011e29e912bf0c47625b0d3b3624ef6375013 Signed-off-by: Klement Sekera <ksekera@cisco.com>