summaryrefslogtreecommitdiffstats
path: root/test/test_lb.py
AgeCommit message (Collapse)AuthorFilesLines
2019-03-11VPP-1508: Use scapy.compat to manage packet level library differences.Paul Vinciguerra1-4/+6
Change-Id: Icdf6abc9e53d33b26fd1d531c7dda6be0bb9cb55 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-07Tests: Refactor payload_to_info()Paul Vinciguerra1-1/+1
All callers of payload_to_info were required to wrap payload with str(). Refactor to call scapy's payload.load for raw payloads or specify the specific fieldname. Change-Id: I1c80599d4df8dc129dbb8274733afaad406d5bcf Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-08-31Support lb on both vip and per-port-vip caseHongjun Ni1-55/+218
Previously, a service is specified by vip. This patch extend that a service is specified by both vip and per-port-vip cases. Change-Id: Icbfd1f972c6bafde7d85c6abb498576bd9ba250d Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-06-26L3DSR fix ip checksum issue and add testHongjun Ni1-0/+6
Change-Id: Iedebbac71d3e694b915d6a126c80ecc3b5473a4a Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-05-18Rework kube-proxy into LB pluginHongjun Ni1-1/+70
Add support of NAT66 Change-Id: Ie6aa79078a3835f989829b9a597c448dfd2f9ea3 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2018-02-02Add L3DSR feature in LB pluginHongjun Ni1-8/+36
L3DSR is used to overcome Layer 2 limitations of Direct Server Return Load Balancing. It maps VIP to DSCP bits, and reuse TOS bits to transfer it to server, and then server will get VIP from DSCP-to-VIP mapping. Please refer to https://www.nanog.org/meetings/nanog51/presentations/Monday/NANOG51.Talk45.nanog51-Schaumann.pdf Change-Id: I403ffeadfb04ed0265086eb2dc41f2e17f8f34cb Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-12-16Use crc32 wrapper (VPP-1086)Gabriel Ganne1-1/+1
This allows arm platforms to also take advantage of crc32 hardware acceleration. * add a wrapper for crc32_u64. It's the only one really used. Using it instead of a call to clib_crc32c() eases building symmetrical hash functions. * replace #ifdef on SSE4 by a test on clib_crc32c_uses_intrinsics. Note: keep the test on i386 * fix typo in lb test log Change-Id: I03a0897b70f6c1717e6901d93cf0fe024d5facb5 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-10-31lb plugin tests - wipe flowtable after each unit testGabriel Ganne1-0/+4
Add new cli api: "test lb flowtable flush" which flushes everything. Call this new cli function after the end of each lb unit test. Change-Id: I71d04a7bfba398f7d4dd9cc3ed24bba786943663 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-10-24fix test_lb_ip4_gre6() cleanupGabriel Ganne1-1/+1
missing "del" keyword, and as a result, we were trying to add the as twice. Change-Id: If78ce03f0c71591c05ff6f4748fd9c929d0f861f Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2016-12-23make test: improve handling of packet capturesKlement Sekera1-6/+5
Perform accounting of expected packets based on created packet infos. Use this accounting info to automatically expect (and verify) the correct number of packets to be captured. Automatically retry the read of the capture file if scapy raises an exception while doing so to handle rare cases when capture file is read while only partially written during busy wait. Don't fail assert_nothing_captured if only junk packets arrived. Change-Id: I16ec2e9410ef510d313ec16b7e13c57d0b2a63f5 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-19make test: filter IPv6 RAs out by defaultKlement Sekera1-11/+2
Most of the test cases are not interested in IPv6 Router Alerts, so change the default behaviour of get_capture to filter out these packets with the possibility of turning the filtering off, for test cases which are interested in the RAs. Change-Id: I0b5ee685f82c49cd32c6d6a4638eb3493d2988fc Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-16make test: improve robustness and performanceKlement Sekera1-5/+11
Introduce an API which asserts empty capture for interface. Throw exception in old API if the capture does not exist, thus making it clear if the test expects packets to arrive or not. Improve performance by not doing sleeps after starting the packet generator, rather lazily deleting captures when needed. Fix wrong usage of packet.show() in various tests. Change-Id: I456cb23316eef99b3f35f80344fe595c4db9a21c Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-12-05make test: fix missing log/packet messagesKlement Sekera1-4/+3
Change-Id: Idb3119792943664748c4abc3829ad723f4156dfe Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-11-10Enable verification received packet for LB testMatej Klotton1-12/+4
Change-Id: I9c8a2f5744f322b2bd91c5ae24aeb1279cd11e0c Signed-off-by: Matej Klotton <mklotton@cisco.com>
2016-11-09Disable non-working checks in load-balancer test and rename ip->ip4Klement Sekera1-8/+11
Change-Id: If62011e29e912bf0c47625b0d3b3624ef6375013 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2016-10-26refactor test frameworkKlement Sekera1-118/+134
Change-Id: I31da3b1857b6399f9899276a2d99cdd19436296c Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Matej Klotton <mklotton@cisco.com> Signed-off-by: Jan Gelety <jgelety@cisco.com> Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-10-10Test: Add test case for Load Balancer pluginPierre Pfister1-0/+210
This adds a basic test for the four existing encap modes for the load balancer plugin. - ip4 over gre4 - ip4 over gre6 - ip6 over gre4 - ip6 over gre6 Apparently, scapy does not support GRE and IPv6 combinations. Hence, those tests do send packets through VPP, but only ip4 over gre4 output is actually parsed and verified. Change-Id: I7cedb0f88fd0788ee51b1428ddf9cff7c037511f Signed-off-by: Pierre Pfister <ppfister@cisco.com>