Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Iabb5a3b15e35fb062c04bbc076b19fe50910d412
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I91d5f5648189143903eb973fdc60de9880fd47c2
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
*Changed configure files to say DPDK instead of Intel DPDK
*Changed rpm and deb config files to say DPDK instead of Intel DPDK
*Changed vnet Makefile to say DPDK instead of Intel DPDK
Change-Id: Ic6e3eacf2341af873d4bd2e036d5afa857ca6355
Signed-off-by: Padraig Connolly <padraig.connolly@intel.com>
|
|
Change-Id: If98e5e00eede8f2aa9f17517c726b337c98e5467
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
A path wight of 0 is a meaningless value. We can either reject it and thus expect CLI/API clients to always write a non-zero value, or we can accept it and assume the intent was a weight of 1 - this fix does the latter.
Change-Id: Ide736dbbb8376f85441f5a67388d5e3acad4d34e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I761af883403b6740bd24ce196ae0bfe6bc77b408
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I62fe0834e1031e191787a26452fb167c33e30ffd
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
This small patch fixes a critical bug during interface deletion.
While the interface was removed, thread placement was not corrected
properly.
This should help fixing VPP-528,VPP-531 as well as other FDS bug reports.
Change-Id: I02f9d44c62b6ca4c0b6d73f476600b342846507f
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
By default, VPP replies with ICMP error: port unreachable when receives
an ‘unknown’ UDP (destination port with no registered listener) packet.
An existing punt() API is extended to accept ALL (~0) as a L4 port
number and if used redirects all ‘unknown’ UDP packets to the host.
New ‘all’ option is added to the “set punt udp” CLI as well.
Change-Id: I444fc5e32ffa3f0f085bb17708bf32b883ba09df
Signed-off-by: Alexander Popovsky (apopovsk) <apopovsk@cisco.com>
|
|
Ingress packets are punted to the “Input ACL node” where traffic is
classified based on n-tuple keys. If no matched session is found from
the classify tables, then it will be passed to “the lookup node” for
normal packet forwarding. If a classify session is hit from one of
classify tables, then packet vnet buffer field sw_if_index[VLIB_TX]
will be updated to the new FIB index used for subsequent IP lookup
for this packet.
Change-Id: Ifdea63196ddb81c2d5c43b8c98e11ddbf5b11858
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
Only consumer was ipsec which is now moved to the new
ip{4,6}-output feature arc.
Change-Id: I06008e67b5449c25eae77f28e1688521af3a23e0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ia287298bac76c8e6bf760d48c1e1e697de52999c
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I2452df3c493eeb0a5078d53a230df6906651c057
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0f7cbf06b5a5acd745d13c9f5c761ea18132107b
Signed-off-by: marek <mazavods@gmail.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixed bug in delete of sub-interface, if sub-interface is xconnected it
was not deleted correctly (show interface address fails).
Interface is set to L3 mode before deletion.
Fixed help in API command.
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
Change-Id: Ibe781e4b53422e6535e34ec72dbe274f9045f051
|
|
Change-Id: I76437b76619a280a44e4def4d6c048eaf3926102
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
|
|
Currently only packet-generator is creating free_lists
during runtime. This avoids crash when buffer is freed
on different worker thread.
Change-Id: If2ae066a12cf7c4b3267d56d8566806f31cf7ffc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I86e7382395a8b6471a0deaf57163718d41b71b83
Signed-off-by: Steven <sluong@cisco.com>
|
|
- Support multiple DHCPv6 server targets across VRFs
- Allows clients and servers to be in different VRFs
- Aligns CLI and VAT for DHCPv6 to DHCPv4
Change-Id: If47756b3a51dc1b9d045a32b7d32ceb80c1746e2
Signed-off-by: Wojciech Dec <wdec@cisco.com>
|
|
When an adjacency changes from incomplete to complete (arp to rewrite) and vice-versa, that update must produce valid behavour w.r.t. the packets that continue to encounter it.
Change-Id: Icc2709aff9807c5d24f91ef7649268991ad9a45d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I709e7cf0bb52d8e6cdc9ddb3b7648660204aa3bd
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I34c527ba910fb282a95458b78d1d684eb337905e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I024b8d79cced45cf53a7a912319eca2cc932b10e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I9c76b6d7ffebeeb92d5eeca5852c487d73151f28
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Optimize VXLAN encap node so that vxlan4-encap node is used for IP4
and vxlan6-encap node is used for IP6 underlay. Also stack the VXLAN
encap nodes to the appropriate FIB IP4 or IP6 load-balance node
instead of ip4/ip6-lookup node to save IP lookup operation.
For VXLAN decap node, check VXLAN header FLAGS field for each packet
and remove the code to support decap-next for IP4 or IP6. These decap-
next values were intended for experimentation purposes and not needed
any more since VXLAN-GPE tunnel is supported. The decap-next field is
still kept in API for backward compatibility and its value has no
effect. Decap next for both vxlan4-decap and vxlan6-decap nodes is
always l2-input node.
Change-Id: I8ac95774946549ec403ab691f999df0c006b460f
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Ief769c966888094944b7a6b7f26527e7eff6103f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
An issue is that the server->server_fib_index is overwritten by
some incorrect value on subsequent calls to the function - e.g.
when setting DHCP proxy for the same FIB table several times.
Change-Id: I2e129b47f5c8fe3a0b924a7d71bb83e6fc53e9b5
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: I0379844824b4c2eb42588d0fb8e1a7eb441e923f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
device-input feature arc requires that all input-nodes have
nexts in sync. packet-generator tends to call vlib_node_add_next
when new stream is created and that puts nexts out of sync.
With this change all input node are siblings of device-input
node so call to vlib_node_add_next(...) will install same next
to the whole family.
Change-Id: I33d79492e5f30f348af19e527f36fe0222c524d7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib821e52dac7cd7ee24e6e495916689e23e8b699a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I38e476c8080faa5a8647ce6be5a71090e0aa8d5b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I5f5251ed6b2a39d5e83dd7c702079245ef5f32b0
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Packet tracing for packets sent or received on vhost interfaces
now includes:
- virtio header information
- virtio queue transmit mode (chained, indirect, etc...)
Should be *really* helpful for dealing with the many existing
qemu/driver versions/implementations.
Change-Id: Id0a5d1d671d8b9d3e05691fe13def991b30ee105
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
New Debug CLI:
packet-generator new {
worker X
}
Change-Id: I71499733a29b49cd36d753d54846d2553af6d024
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The tuntap punt/inject should be enabled for IPv4/6 RX once any vpp
interface has an IP address.
Change-Id: I4a507b7540b7464ed6d21035ac9b8f9463028c6f
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
From logical point, if first packet is ipv4, and second packet is ipv6.
When first packet failed, the procedure will skip key6_1 setting.
This will lead to second packet's failure.
But here the graph node only process either ipv4 or ipv6 packets completely.
So it is not an issue here.
This patch only make the packet processig's logic clear. It is just a cosmetic change.
Change-Id: I0104ebf2546208d9068000649ce6dccdeeb5aa79
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: Ice97940a27c9f4d983d9199d59719d953520fcdb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iccae655334b6219d22c325108b0e7f37d1dd68cf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I62deaaa47a9259c886efa702eb4279c1c481585f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Previos implementation imposed a limit that node can be member of
only one feature arc as feature arc index was stored in node runtime.
Now start node stores index into vlib_buffer_t and feature
nodes are taking it from there.
Change-Id: I252841083bc292af7ed36bf1ac652f2b8c16bfb8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixes DHCPv6 relay reply message corruption.
Change-Id: Iead995f29d2fa9cbb04f0f9d42b3aa9002267117
Signed-off-by: Wojciech Dec <wdec@cisco.com>
|
|
This patch adds multi-queue support to non-dpdk's vhost-user
driver.
Waiting for a unified way to manage threads, this patch
defines a way to assign threads to interfaces that is
specific to vhost.
Change-Id: I86298788b1a4e886c5431f187dc17175d12c7a8b
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
It works with and without DPDK so it allws us to enable
lawful-intercept code in vpp_lite images.
Change-Id: I08f234cbc652c3ff47a6123a43b9e7f8bdcd5534
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Icd29c9013ae70f5444eb940aff4f08589e755f48
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Properly initialize allocated buffers
Change-Id: Ib2005e605c89a164a4856790db6968fcd7520f5c
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- Added support in classifier session to identify a flow to be iOAM6 encap/decap
- Sequence number as part of iOAM6 E2E header is created as a plugin.
Change-Id: Ib7605de45aecff25d684d099b525f8dc96ee7038
Signed-off-by: AkshayaNadahalli <anadahal@cisco.com>
|
|
Removed by accident.
Change-Id: Ifebbe99eb2825cb6ee7d33d55cf3c087a9817f72
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ie4c820933114af2269c99531856c45b0271a4a3e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I3e02588e8c05ec50eacbe7c10cd5ac185daad43b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch allows for empty dpdk device configuration
such as: dpdk { dev 0000:0a:00.0 { } }
Instead of exiting.
Change-Id: If9488eecc7fb1e0b5c6626f9c074649b39b727d3
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|