From 82b22f75b903adf6323c1aeb35f1ba2884d1ce87 Mon Sep 17 00:00:00 2001 From: jdenisco Date: Mon, 17 Dec 2018 15:45:21 -0500 Subject: docs: Add vmxmet3 driver Change-Id: I96425804c310a1ac1b7f5f12bb636e591c7bd429 Signed-off-by: jdenisco --- docs/about.rst | 4 +- docs/usecases/index.rst | 1 + docs/usecases/vmxnet3.rst | 128 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 131 insertions(+), 2 deletions(-) create mode 100644 docs/usecases/vmxnet3.rst diff --git a/docs/about.rst b/docs/about.rst index 0d8d8d94189..cd95bafbb7c 100644 --- a/docs/about.rst +++ b/docs/about.rst @@ -4,6 +4,6 @@ About ===== -**VPP Version:** 19.01-rc0~459-geb6c799 +**VPP Version:** 19.01-rc0~497-g05ce4b8 -**Built on:** Wed Dec 12 19:37:08 GMT 2018 +**Built on:** Mon Dec 17 20:43:52 GMT 2018 diff --git a/docs/usecases/index.rst b/docs/usecases/index.rst index 3dabd78ca06..614f0026094 100644 --- a/docs/usecases/index.rst +++ b/docs/usecases/index.rst @@ -12,6 +12,7 @@ extensive list, but should give a sampling of the many features contained in FD. containers simpleperf/index.rst vhost/index.rst + vmxnet3 homegateway contiv/index.rst networksim diff --git a/docs/usecases/vmxnet3.rst b/docs/usecases/vmxnet3.rst new file mode 100644 index 00000000000..7e7210f83fc --- /dev/null +++ b/docs/usecases/vmxnet3.rst @@ -0,0 +1,128 @@ +.. _vmxnet3: + +VPP with VMware/Vmxnet3 +======================= + +This section describes a native Vmxnet3 driver that is included with VPP. +This driver is written as a plugin and is found in src/plugin/vmxnet3. + +Advantages +---------- + +The native VPP native vmxnet3 driver provides the following features +that are not provided with the standard dpdk vmxnet3 driver. + +- Interrupt mode +- Adaptive mode +- TSO/LRO mode + +Does not support +---------------- + +This driver does yet support the following features. + +- NUMA support +- RSS/multiple queues +- VLAN filter + +Prerequisites +------------- + +- This code is tested with vfio-pci driver installed with Ubuntu 18.04 + which has kernel version 4.15.0-33-generic. + +- This code is tested with ESXi vSwitch version 6.0, release build + 3620759. + +- Driver requires MSI-X interrupt support, which is not supported by + uio_pci_generic driver, so vfio-pci needs to be used. On systems + without IOMMU vfio driver can still be used with recent kernels which + support no-iommu mode. + +System setup +~~~~~~~~~~~~ + +To use the native VPP vmxnet3 driver use the following Steps + +Load VFIO driver + +.. code-block:: console + + $ sudo modprobe vfio-pci + +For systems without IOMMU only, enable unsafe NOIOMMU mode + +.. code-block:: console + + $ echo Y | sudo tee /sys/module/vfio/parameters/enable_unsafe_noiommu_mode + +To bind interface to vfio-pci first install the :ref:`configutil`. This will download +the dpdk_devbind.py script. It is located in */usr/vpp/vpp-config/scripts* with Centos +and */usr/local/vpp/vpp-config/scripts* with Ubuntu. + +Bind the driver with the following commands: + +.. code-block:: console + + $ sudo /usr/local/vpp/vpp-config/scripts/dpdk-devbind.py -s + + Network devices using DPDK-compatible driver + ============================================ + + + Network devices using kernel driver + =================================== + 0000:03:00.0 'VMXNET3 Ethernet Controller' if=ens160 drv=vmxnet3 unused=vfio-pci,uio_pci_generic + 0000:0b:00.0 'VMXNET3 Ethernet Controller' drv=vfio-pci unused=vmxnet3,uio_pci_generic + 0000:13:00.0 'VMXNET3 Ethernet Controller' drv=vfio-pci unused=vmxnet3,uio_pci_generic + ..... + + $ sudo /usr/local/vpp/vpp-config/scripts/dpdk-devbind.py --bind vfio-pci 0b:00.0 + + +Interface Creation +~~~~~~~~~~~~~~~~~~ + +Now create the interface dynamically with following: + +.. code-block:: console + + $ sudo vppctl create interface vmxnet3 0000:0b:00.0 + $ sudo set int state vmxnet3-0/b/0/0 up + +Interface Deletion +~~~~~~~~~~~~~~~~~~ + +If the interface needs to be deleted: + +.. code-block:: console + + $ sudo delete interface vmxnet3 + +Show vmxnet3 +~~~~~~~~~~~~ + +Interface and ring information can be obtained with the command +**show vmxnet3 [if-name] [desc]** + +For example: + +.. code-block:: console + + $ sudo vppctl show vmxnet + Interface: vmxnet3-0/b/0/0 (ifindex 1) + Version: 1 + PCI Address: 0000:0b:00.0 + Mac Address: 00:50:56:88:63:be + hw if index: 1 + Device instance: 0 + Number of interrupts: 2 + Queue 0 (RX) + RX completion next index 786 + RX completion generation flag 0x80000000 + ring 0 size 4096 fill 4094 consume 785 produce 784 + ring 1 size 4096 fill 4096 consume 0 produce 0 + Queue 0 (TX) + TX completion next index 216 + TX completion generation flag 0x0 + size 4096 consume 216 produce 245 -- cgit 1.2.3-korg