From 06dcd45ff81e06bc8cf40ed487c0b2652d346a5a Mon Sep 17 00:00:00 2001 From: John DeNisco Date: Thu, 26 Jul 2018 12:45:10 -0400 Subject: Initial commit of Sphinx docs Change-Id: I9fca8fb98502dffc2555f9de7f507b6f006e0e77 Signed-off-by: John DeNisco --- docs/troubleshooting/reportingissues/index.rst | 8 + .../reportingissues/reportingissues.rst | 216 +++++++++++++++++++++ 2 files changed, 224 insertions(+) create mode 100644 docs/troubleshooting/reportingissues/index.rst create mode 100644 docs/troubleshooting/reportingissues/reportingissues.rst (limited to 'docs/troubleshooting/reportingissues') diff --git a/docs/troubleshooting/reportingissues/index.rst b/docs/troubleshooting/reportingissues/index.rst new file mode 100644 index 00000000000..4d954ac8746 --- /dev/null +++ b/docs/troubleshooting/reportingissues/index.rst @@ -0,0 +1,8 @@ +.. _reportingissues: + +How to Report an Issue +====================== + +.. toctree:: + + reportingissues diff --git a/docs/troubleshooting/reportingissues/reportingissues.rst b/docs/troubleshooting/reportingissues/reportingissues.rst new file mode 100644 index 00000000000..7437d8ae0cc --- /dev/null +++ b/docs/troubleshooting/reportingissues/reportingissues.rst @@ -0,0 +1,216 @@ +.. _reportingbugs: + +.. toctree:: + +Reporting Bugs +============== + +Although every situation is different, this page describes how to +collect data which will help make efficient use of everyone's time +when dealing with vpp bugs. + +Before you press the Jira button to create a bug report - or email +vpp-dev@lists.fd.io - please ask yourself whether there's enough +information for someone else to understand and possibly to reproduce +the issue given a reasonable amount of effort. **Unicast emails to +maintainers, committers, and the project PTL are strongly discouraged.** + +A good strategy for clear-cut bugs: file a detailed Jira ticket, and +then send a short description of the issue to vpp-dev@lists.fd.io, +perhaps from the Jira ticket description. It's fine to send email to +vpp-dev@lists.fd.io to ask a few questions **before** filing Jira tickets. + +Data to include in bug reports +============================== + +Image version and operating environment +--------------------------------------- + +Please make sure to include the vpp image version and command-line arguments. + +.. code-block:: console + + $ sudo bash + # vppctl show version verbose cmdline + Version: v18.07-rc0~509-gb9124828 + Compiled by: vppuser + Compile host: vppbuild + Compile date: Fri Jul 13 09:05:37 EDT 2018 + Compile location: /scratch/vpp-showversion + Compiler: GCC 7.3.0 + Current PID: 5211 + Command line arguments: + /scratch/vpp-showversion/build-root/install-vpp_debug-native/vpp/bin/vpp + unix + interactive + +With respect to the operating environment: if misbehavior involving a +specific VM / container / bare-metal environment is involved, please +describe the environment in detail: + +* Linux Distro (e.g. Ubuntu 14.04.3 LTS, CentOS-7, etc.) +* NIC type(s) (ixgbe, i40e, enic, etc. etc.), vhost-user, tuntap +* NUMA configuration if applicable + +Please note the CPU architecture (x86_86, aarch64), and hardware platform. + +When practicable, please report issues against released software, or +unmodified master/latest software. + +"Show" command output +--------------------- + +Every situation is different. If the issue involves a sequence of debug CLI command, please enable CLI command logging, and send the sequence involved. Note that the debug CLI is a developer's tool - **no warranty express or implied** - and that we may choose not to fix debug CLI bugs. + +Please include "show error" [error counter] output. It's often helpful to "clear error", send a bit of traffic, then "show error" particularly when running vpp on a noisy networks. + +Please include ip4 / ip6 / mpls FIB contents ("show ip fib", "show ip6 fib", "show mpls fib", "show mpls tunnel"). + +Please include "show hardware", "show interface", and "show interface address" output + +Here is a consolidated set of commands that are generally useful before/after sending traffic. Before sending traffic. + +.. code-block:: console + + vppctl clear hardware + vppctl clear interface + vppctl clear error + vppctl clear run + +Send some traffic and then issue the following commands. + +.. code-block:: console + + vppctl show version verbose + vppctl show hardware + vppctl show hardware address + vppctl show interface + vppctl show run + vppctl show error + +Here are some protocol specific show commands that may also make +sense. Only include those features which have been configured. + +.. code-block:: console + + vppctl show l2fib + vppctl show bridge-domain + + vppctl show ip fib + vppctl show ip arp + + vppctl show ip6 fib + vppctl show ip6 neighbors + + vppctl show mpls fib + vppctl show mpls tunnel + +Network Topology +---------------- + +Please include a crisp description of the network topology, including +L2 / IP / MPLS / segment-routing addressing details. If you expect +folks to reproduce and debug issues, this is a must. + +At or above a certain level of topological complexity, it becomes +problematic to reproduce the original setup. + +Packet Tracer Output +-------------------- + +If you capture packet tracer output which seems relevant, please include it. + +.. code-block:: console + + vppctl trace add dpdk-input 100 # or similar + +send-traffic + +.. code-block:: console + + vppctl show trace + +Capturing post-mortem data +========================== + +It should go without saying, but anyhow: **please put post-mortem data +in obvious, accessible places.** Time wasted trying to acquire +accounts, credentials, and IP addresses simply delays problem +resolution. + +Please remember to add post-mortem data location information to Jira +tickets. + +Syslog Output +------------- + +The vpp signal handler typically writes a certain amount of data in +/var/log/syslog before exiting. Make sure to check for evidence, e.g +via "grep /usr/bin/vpp /var/log/syslog" or similar. + +Binary API Trace +---------------- + +If the issue involves a sequence of control-plane API messages - even +a very long sequence - please enable control-plane API +tracing. Control-plane API post-mortem traces end up in +/tmp/api_post_mortem.. + +Please remember to put post-mortem binary api traces in accessible +places. + +These API traces are especially helpful in cases where the vpp engine +is throwing traffic on the floor, e.g. for want of a default route or +similar. + +Make sure to leave the default stanza "... api-trace { on } ... " in +the vpp startup configuration file /etc/vpp/startup.conf, or to +include it in the command line arguments passed by orchestration +software. + +Core Files +---------- + +Production systems, as well as long-running pre-production soak-test +systems, **must** arrange to collect core images. There are various +ways to configure core image capture, including e.g. the Ubuntu +"corekeeper" package. In a pinch, the following very basic sequence +will capture usable vpp core files in /tmp/dumps. + +.. code-block:: console + + # mkdir -p /tmp/dumps + # sysctl -w debug.exception-trace=1 + # sysctl -w kernel.core_pattern="/tmp/dumps/%e-%t" + # ulimit -c unlimited + # echo 2 > /proc/sys/fs/suid_dumpable + +Vpp core files often appear enormous. Gzip typically compresses them +to manageable sizes. A multi-GByte corefile often compresses to 10-20 +Mbytes. + +Please remember to put compressed core files in accessible places. + +Make sure to leave the default stanza "... unix { ... full-coredump +... } ... " in the vpp startup configuration file +/etc/vpp/startup.conf, or to include it in the command line arguments +passed by orchestration software. + +Core files from private, modified images are discouraged. If it's +necessary to go that route, please copy the **exact** Debian +packages (or RPMs) corresponding to the core file to the same public +place as the core file. In particular. + +* vpp__.deb # the vpp executable +* vpp-dbg__.deb # debug symbols +* vpp-dev__.deb # development package +* vpp-lib__.deb # shared libraries +* vpp-plugins__.deb # plugins + +Please include the full commit-ID the Jira ticket. + +If we go through the setup process only to discover that the image and +core files don't match, it will simply delay resolution of the +issue. And it will annoy the heck out of the engineer who just wasted +their time. Exact means **exact**, not "oh, gee, I added a few lines +of debug scaffolding since then..." -- cgit 1.2.3-korg