From 25c4d396eae99e23c4ebe7155fde7700dd1130b9 Mon Sep 17 00:00:00 2001 From: Scott Keeler Date: Mon, 1 Oct 2018 14:50:57 -0400 Subject: docs: add contiv vpp Change-Id: I92227fc4968fc6a478beb7f38707b91e9f0635ec Signed-off-by: Scott Keeler --- docs/usecases/contiv/MULTI_NIC_SETUP.md | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 docs/usecases/contiv/MULTI_NIC_SETUP.md (limited to 'docs/usecases/contiv/MULTI_NIC_SETUP.md') diff --git a/docs/usecases/contiv/MULTI_NIC_SETUP.md b/docs/usecases/contiv/MULTI_NIC_SETUP.md new file mode 100644 index 00000000000..5cbb031d290 --- /dev/null +++ b/docs/usecases/contiv/MULTI_NIC_SETUP.md @@ -0,0 +1,21 @@ +### Setting Up a Node with Multiple NICs + +* First, configure hardware interfaces in the VPP startup config, as +described [here](https://github.com/contiv/vpp/blob/master/docs/VPP_CONFIG.md#multi-nic-configuration). + +* For each interface owned by Linux, you need to provide individual + configuration for each interface used by VPP in the Node Configuration + for thenode in the `contiv-vpp.yaml`. For example, if both `ens3` and + `ens4` are known to Linux, then put the following stanza into the node's + NodeConfig: +``` +... + NodeConfig: + - NodeName: "ubuntu-1" + StealInterface: "ens3" + StealInterface: "ens4" +... +``` + If only `ens3` is known to Linux, you only put a line for `ens3` into the + above NodeConfig. + -- cgit 1.2.3-korg