From 0e969ac8431c80ff4bca5f6985876b1c584eefcd Mon Sep 17 00:00:00 2001 From: Damjan Marion Date: Wed, 6 Jun 2018 14:23:42 +0200 Subject: Add support for DPDK 18.05 Change-Id: I205932bc727c990011bbbe1dc6c0cf5349d19806 Signed-off-by: Damjan Marion --- ...t-of-buffer-counter-to-extended-statistic.patch | 135 ---- ...t-mlx5-remove-unused-interface-name-query.patch | 22 - ...mlx5-fix-extended-statistics-wrong-number.patch | 87 --- ...tended-statistics-counters-identification.patch | 13 - ...5-fix-startup-when-flow-cannot-be-applied.patch | 57 -- .../0006-net-mlx5-add-hardware-TSO-support.patch | 385 ---------- ...d-hardware-checksum-offload-for-tunnel-pa.patch | 194 ----- ...d-enhanced-multi-packet-send-for-ConnectX.patch | 809 --------------------- 8 files changed, 1702 deletions(-) delete mode 100644 dpdk/dpdk-17.02_patches/0001-dpdk-dev-net-mlx5-add-out-of-buffer-counter-to-extended-statistic.patch delete mode 100644 dpdk/dpdk-17.02_patches/0002-dpdk-dev-1-2-net-mlx5-remove-unused-interface-name-query.patch delete mode 100644 dpdk/dpdk-17.02_patches/0003-dpdk-dev-2-2-net-mlx5-fix-extended-statistics-wrong-number.patch delete mode 100644 dpdk/dpdk-17.02_patches/0004-dpdk-dev-net-mlx5-fix-extended-statistics-counters-identification.patch delete mode 100644 dpdk/dpdk-17.02_patches/0005-net-mlx5-fix-startup-when-flow-cannot-be-applied.patch delete mode 100644 dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch delete mode 100644 dpdk/dpdk-17.02_patches/0007-add-hardware-checksum-offload-for-tunnel-pa.patch delete mode 100644 dpdk/dpdk-17.02_patches/0008-net-mlx5-add-enhanced-multi-packet-send-for-ConnectX.patch (limited to 'dpdk/dpdk-17.02_patches') diff --git a/dpdk/dpdk-17.02_patches/0001-dpdk-dev-net-mlx5-add-out-of-buffer-counter-to-extended-statistic.patch b/dpdk/dpdk-17.02_patches/0001-dpdk-dev-net-mlx5-add-out-of-buffer-counter-to-extended-statistic.patch deleted file mode 100644 index 3ebf5e8aa91..00000000000 --- a/dpdk/dpdk-17.02_patches/0001-dpdk-dev-net-mlx5-add-out-of-buffer-counter-to-extended-statistic.patch +++ /dev/null @@ -1,135 +0,0 @@ -diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h -index 879da5e..2b4345a 100644 ---- a/drivers/net/mlx5/mlx5.h -+++ b/drivers/net/mlx5/mlx5.h -@@ -197,6 +197,8 @@ struct mlx5_secondary_data { - int mlx5_is_secondary(void); - int priv_get_ifname(const struct priv *, char (*)[IF_NAMESIZE]); - int priv_ifreq(const struct priv *, int req, struct ifreq *); -+int priv_is_ib_cntr(const char *); -+int priv_get_cntr_sysfs(struct priv *, const char *, uint64_t *); - int priv_get_num_vfs(struct priv *, uint16_t *); - int priv_get_mtu(struct priv *, uint16_t *); - int priv_set_flags(struct priv *, unsigned int, unsigned int); -diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c -index 2145965..6b64f44 100644 ---- a/drivers/net/mlx5/mlx5_ethdev.c -+++ b/drivers/net/mlx5/mlx5_ethdev.c -@@ -234,6 +234,23 @@ struct priv * - } - - /** -+ * Check if the counter is located on ib counters file. -+ * -+ * @param[in] cntr -+ * Counter name. -+ * -+ * @return -+ * 1 if counter is located on ib counters file , 0 otherwise. -+ */ -+int -+priv_is_ib_cntr(const char *cntr) -+{ -+ if (!strcmp(cntr, "out_of_buffer")) -+ return 1; -+ return 0; -+} -+ -+/** - * Read from sysfs entry. - * - * @param[in] priv -@@ -260,10 +277,15 @@ struct priv * - if (priv_get_ifname(priv, &ifname)) - return -1; - -- MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path, -- ifname, entry); -- -- file = fopen(path, "rb"); -+ if (priv_is_ib_cntr(entry)) { -+ MKSTR(path, "%s/ports/1/hw_counters/%s", -+ priv->ctx->device->ibdev_path, entry); -+ file = fopen(path, "rb"); -+ } else { -+ MKSTR(path, "%s/device/net/%s/%s", -+ priv->ctx->device->ibdev_path, ifname, entry); -+ file = fopen(path, "rb"); -+ } - if (file == NULL) - return -1; - ret = fread(buf, 1, size, file); -@@ -469,6 +491,30 @@ struct priv * - } - - /** -+ * Read device counter from sysfs. -+ * -+ * @param priv -+ * Pointer to private structure. -+ * @param name -+ * Counter name. -+ * @param[out] cntr -+ * Counter output buffer. -+ * -+ * @return -+ * 0 on success, -1 on failure and errno is set. -+ */ -+int -+priv_get_cntr_sysfs(struct priv *priv, const char *name, uint64_t *cntr) -+{ -+ unsigned long ulong_ctr; -+ -+ if (priv_get_sysfs_ulong(priv, name, &ulong_ctr) == -1) -+ return -1; -+ *cntr = ulong_ctr; -+ return 0; -+} -+ -+/** - * Set device MTU. - * - * @param priv -diff --git a/drivers/net/mlx5/mlx5_stats.c b/drivers/net/mlx5/mlx5_stats.c -index 20c957e..a48ebea 100644 ---- a/drivers/net/mlx5/mlx5_stats.c -+++ b/drivers/net/mlx5/mlx5_stats.c -@@ -125,6 +125,10 @@ struct mlx5_counter_ctrl { - .dpdk_name = "tx_errors_phy", - .ctr_name = "tx_errors_phy", - }, -+ { -+ .dpdk_name = "rx_out_of_buffer", -+ .ctr_name = "out_of_buffer", -+ }, - }; - - static const unsigned int xstats_n = RTE_DIM(mlx5_counters_init); -@@ -159,9 +163,15 @@ struct mlx5_counter_ctrl { - WARN("unable to read statistic values from device"); - return -1; - } -- for (i = 0; i != xstats_n; ++i) -- stats[i] = (uint64_t) -- et_stats->data[xstats_ctrl->dev_table_idx[i]]; -+ for (i = 0; i != xstats_n; ++i) { -+ if (priv_is_ib_cntr(mlx5_counters_init[i].ctr_name)) -+ priv_get_cntr_sysfs(priv, -+ mlx5_counters_init[i].ctr_name, -+ &stats[i]); -+ else -+ stats[i] = (uint64_t) -+ et_stats->data[xstats_ctrl->dev_table_idx[i]]; -+ } - return 0; - } - -@@ -233,6 +243,8 @@ struct mlx5_counter_ctrl { - } - } - for (j = 0; j != xstats_n; ++j) { -+ if (priv_is_ib_cntr(mlx5_counters_init[i].ctr_name)) -+ continue; - if (xstats_ctrl->dev_table_idx[j] >= dev_stats_n) { - WARN("counter \"%s\" is not recognized", - mlx5_counters_init[j].dpdk_name); diff --git a/dpdk/dpdk-17.02_patches/0002-dpdk-dev-1-2-net-mlx5-remove-unused-interface-name-query.patch b/dpdk/dpdk-17.02_patches/0002-dpdk-dev-1-2-net-mlx5-remove-unused-interface-name-query.patch deleted file mode 100644 index aa03639bed6..00000000000 --- a/dpdk/dpdk-17.02_patches/0002-dpdk-dev-1-2-net-mlx5-remove-unused-interface-name-query.patch +++ /dev/null @@ -1,22 +0,0 @@ -diff --git a/drivers/net/mlx5/mlx5_stats.c b/drivers/net/mlx5/mlx5_stats.c -index 20c957e..0c80e4f 100644 ---- a/drivers/net/mlx5/mlx5_stats.c -+++ b/drivers/net/mlx5/mlx5_stats.c -@@ -177,17 +177,12 @@ struct mlx5_counter_ctrl { - struct mlx5_xstats_ctrl *xstats_ctrl = &priv->xstats_ctrl; - unsigned int i; - unsigned int j; -- char ifname[IF_NAMESIZE]; - struct ifreq ifr; - struct ethtool_drvinfo drvinfo; - struct ethtool_gstrings *strings = NULL; - unsigned int dev_stats_n; - unsigned int str_sz; - -- if (priv_get_ifname(priv, &ifname)) { -- WARN("unable to get interface name"); -- return; -- } - /* How many statistics are available. */ - drvinfo.cmd = ETHTOOL_GDRVINFO; - ifr.ifr_data = (caddr_t)&drvinfo; diff --git a/dpdk/dpdk-17.02_patches/0003-dpdk-dev-2-2-net-mlx5-fix-extended-statistics-wrong-number.patch b/dpdk/dpdk-17.02_patches/0003-dpdk-dev-2-2-net-mlx5-fix-extended-statistics-wrong-number.patch deleted file mode 100644 index 05c2e8df82c..00000000000 --- a/dpdk/dpdk-17.02_patches/0003-dpdk-dev-2-2-net-mlx5-fix-extended-statistics-wrong-number.patch +++ /dev/null @@ -1,87 +0,0 @@ -diff --git a/drivers/net/mlx5/mlx5_stats.c b/drivers/net/mlx5/mlx5_stats.c -index 0c80e4f..60ffbaa 100644 ---- a/drivers/net/mlx5/mlx5_stats.c -+++ b/drivers/net/mlx5/mlx5_stats.c -@@ -166,6 +166,29 @@ struct mlx5_counter_ctrl { - } - - /** -+ * Query the number of statistics provided by ETHTOOL. -+ * -+ * @param priv -+ * Pointer to private structure. -+ * -+ * @return -+ * Number of statistics on success, -1 on error. -+ */ -+static int -+priv_ethtool_get_stats_n(struct priv *priv) { -+ struct ethtool_drvinfo drvinfo; -+ struct ifreq ifr; -+ -+ drvinfo.cmd = ETHTOOL_GDRVINFO; -+ ifr.ifr_data = (caddr_t)&drvinfo; -+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr) != 0) { -+ WARN("unable to query number of statistics"); -+ return -1; -+ } -+ return drvinfo.n_stats; -+} -+ -+/** - * Init the structures to read device counters. - * - * @param priv -@@ -178,19 +201,11 @@ struct mlx5_counter_ctrl { - unsigned int i; - unsigned int j; - struct ifreq ifr; -- struct ethtool_drvinfo drvinfo; - struct ethtool_gstrings *strings = NULL; - unsigned int dev_stats_n; - unsigned int str_sz; - -- /* How many statistics are available. */ -- drvinfo.cmd = ETHTOOL_GDRVINFO; -- ifr.ifr_data = (caddr_t)&drvinfo; -- if (priv_ifreq(priv, SIOCETHTOOL, &ifr) != 0) { -- WARN("unable to get driver info"); -- return; -- } -- dev_stats_n = drvinfo.n_stats; -+ dev_stats_n = priv_ethtool_get_stats_n(priv); - if (dev_stats_n < 1) { - WARN("no extended statistics available"); - return; -@@ -410,7 +425,15 @@ struct mlx5_counter_ctrl { - int ret = xstats_n; - - if (n >= xstats_n && stats) { -+ struct mlx5_xstats_ctrl *xstats_ctrl = &priv->xstats_ctrl; -+ int stats_n; -+ - priv_lock(priv); -+ stats_n = priv_ethtool_get_stats_n(priv); -+ if (stats_n < 0) -+ return -1; -+ if (xstats_ctrl->stats_n != stats_n) -+ priv_xstats_init(priv); - ret = priv_xstats_get(priv, stats); - priv_unlock(priv); - } -@@ -427,8 +450,15 @@ struct mlx5_counter_ctrl { - mlx5_xstats_reset(struct rte_eth_dev *dev) - { - struct priv *priv = mlx5_get_priv(dev); -+ struct mlx5_xstats_ctrl *xstats_ctrl = &priv->xstats_ctrl; -+ int stats_n; - - priv_lock(priv); -+ stats_n = priv_ethtool_get_stats_n(priv); -+ if (stats_n < 0) -+ return; -+ if (xstats_ctrl->stats_n != stats_n) -+ priv_xstats_init(priv); - priv_xstats_reset(priv); - priv_unlock(priv); - } diff --git a/dpdk/dpdk-17.02_patches/0004-dpdk-dev-net-mlx5-fix-extended-statistics-counters-identification.patch b/dpdk/dpdk-17.02_patches/0004-dpdk-dev-net-mlx5-fix-extended-statistics-counters-identification.patch deleted file mode 100644 index 8c066ad3850..00000000000 --- a/dpdk/dpdk-17.02_patches/0004-dpdk-dev-net-mlx5-fix-extended-statistics-counters-identification.patch +++ /dev/null @@ -1,13 +0,0 @@ -diff --git a/drivers/net/mlx5/mlx5_stats.c b/drivers/net/mlx5/mlx5_stats.c -index 1953293..703f48c 100644 ---- a/drivers/net/mlx5/mlx5_stats.c -+++ b/drivers/net/mlx5/mlx5_stats.c -@@ -253,7 +253,7 @@ struct mlx5_counter_ctrl { - } - } - for (j = 0; j != xstats_n; ++j) { -- if (priv_is_ib_cntr(mlx5_counters_init[i].ctr_name)) -+ if (priv_is_ib_cntr(mlx5_counters_init[j].ctr_name)) - continue; - if (xstats_ctrl->dev_table_idx[j] >= dev_stats_n) { - WARN("counter \"%s\" is not recognized", diff --git a/dpdk/dpdk-17.02_patches/0005-net-mlx5-fix-startup-when-flow-cannot-be-applied.patch b/dpdk/dpdk-17.02_patches/0005-net-mlx5-fix-startup-when-flow-cannot-be-applied.patch deleted file mode 100644 index af928bb2abb..00000000000 --- a/dpdk/dpdk-17.02_patches/0005-net-mlx5-fix-startup-when-flow-cannot-be-applied.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 0866d640e42d6c54b2b3f15ebde9930e756ba4d5 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?N=C3=A9lio=20Laranjeiro?= -Date: Wed, 22 Feb 2017 10:57:52 +0100 -Subject: [PATCH] net/mlx5: fix startup when flow cannot be applied - -When flows cannot be re-applied due to configuration modifications, the -start function should rollback the configuration done. - -Fixes: 2097d0d1e2cc ("net/mlx5: support basic flow items and actions") -Cc: stable@dpdk.org - -Signed-off-by: Nelio Laranjeiro ---- - drivers/net/mlx5/mlx5_trigger.c | 21 ++++++++++++++++----- - 1 file changed, 16 insertions(+), 5 deletions(-) - -diff --git a/drivers/net/mlx5/mlx5_trigger.c b/drivers/net/mlx5/mlx5_trigger.c -index 30addd2..0acbf28 100644 ---- a/drivers/net/mlx5/mlx5_trigger.c -+++ b/drivers/net/mlx5/mlx5_trigger.c -@@ -82,17 +82,28 @@ mlx5_dev_start(struct rte_eth_dev *dev) - ERROR("%p: an error occurred while configuring hash RX queues:" - " %s", - (void *)priv, strerror(err)); -- /* Rollback. */ -- priv_special_flow_disable_all(priv); -- priv_mac_addrs_disable(priv); -- priv_destroy_hash_rxqs(priv); -+ goto error; - } - if (dev->data->dev_conf.fdir_conf.mode != RTE_FDIR_MODE_NONE) - priv_fdir_enable(priv); -- priv_dev_interrupt_handler_install(priv, dev); - err = priv_flow_start(priv); -+ if (err) { -+ priv->started = 0; -+ ERROR("%p: an error occurred while configuring flows:" -+ " %s", -+ (void *)priv, strerror(err)); -+ goto error; -+ } -+ priv_dev_interrupt_handler_install(priv, dev); - priv_xstats_init(priv); - priv_unlock(priv); -+ return 0; -+error: -+ /* Rollback. */ -+ priv_special_flow_disable_all(priv); -+ priv_mac_addrs_disable(priv); -+ priv_destroy_hash_rxqs(priv); -+ priv_flow_stop(priv); - return -err; - } - --- -2.7.4 - diff --git a/dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch b/dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch deleted file mode 100644 index 929a61325aa..00000000000 --- a/dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch +++ /dev/null @@ -1,385 +0,0 @@ -From e25bad4a287924d26627ffe307f8a12824b87054 Mon Sep 17 00:00:00 2001 -From: Shahaf Shuler -Date: Thu, 2 Mar 2017 11:01:31 +0200 -Subject: [PATCH] net/mlx5: add hardware TSO support - -Implement support for hardware TSO. - -Signed-off-by: Shahaf Shuler -Acked-by: Nelio Laranjeiro ---- - doc/guides/nics/features/mlx5.ini | 1 + - doc/guides/nics/mlx5.rst | 12 ++++ - drivers/net/mlx5/mlx5.c | 18 ++++++ - drivers/net/mlx5/mlx5.h | 2 + - drivers/net/mlx5/mlx5_defs.h | 3 + - drivers/net/mlx5/mlx5_ethdev.c | 2 + - drivers/net/mlx5/mlx5_rxtx.c | 123 +++++++++++++++++++++++++++++++++----- - drivers/net/mlx5/mlx5_rxtx.h | 2 + - drivers/net/mlx5/mlx5_txq.c | 13 ++++ - 9 files changed, 160 insertions(+), 16 deletions(-) - -diff --git a/doc/guides/nics/features/mlx5.ini b/doc/guides/nics/features/mlx5.ini -index f20d214..8df25ce 100644 ---- a/doc/guides/nics/features/mlx5.ini -+++ b/doc/guides/nics/features/mlx5.ini -@@ -11,6 +11,7 @@ Queue start/stop = Y - MTU update = Y - Jumbo frame = Y - Scattered Rx = Y -+TSO = Y - Promiscuous mode = Y - Allmulticast mode = Y - Unicast MAC filter = Y -diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst -index 5f6e594..9b0ba29 100644 ---- a/doc/guides/nics/mlx5.rst -+++ b/doc/guides/nics/mlx5.rst -@@ -90,6 +90,7 @@ Features - - Secondary process TX is supported. - - KVM and VMware ESX SR-IOV modes are supported. - - RSS hash result is supported. -+- Hardware TSO. - - Limitations - ----------- -@@ -186,9 +187,20 @@ Run-time configuration - save PCI bandwidth and improve performance at the cost of a slightly - higher CPU usage. - -+ This option cannot be used in conjunction with ``tso`` below. When ``tso`` -+ is set, ``txq_mpw_en`` is disabled. -+ - It is currently only supported on the ConnectX-4 Lx and ConnectX-5 - families of adapters. Enabled by default. - -+- ``tso`` parameter [int] -+ -+ A nonzero value enables hardware TSO. -+ When hardware TSO is enabled, packets marked with TCP segmentation -+ offload will be divided into segments by the hardware. -+ -+ Disabled by default. -+ - Prerequisites - ------------- - -diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c -index d4bd469..03ed3b3 100644 ---- a/drivers/net/mlx5/mlx5.c -+++ b/drivers/net/mlx5/mlx5.c -@@ -84,6 +84,9 @@ - /* Device parameter to enable multi-packet send WQEs. */ - #define MLX5_TXQ_MPW_EN "txq_mpw_en" - -+/* Device parameter to enable hardware TSO offload. */ -+#define MLX5_TSO "tso" -+ - /** - * Retrieve integer value from environment variable. - * -@@ -290,6 +293,8 @@ mlx5_args_check(const char *key, const char *val, void *opaque) - priv->txqs_inline = tmp; - } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) { - priv->mps &= !!tmp; /* Enable MPW only if HW supports */ -+ } else if (strcmp(MLX5_TSO, key) == 0) { -+ priv->tso = !!tmp; - } else { - WARN("%s: unknown parameter", key); - return -EINVAL; -@@ -316,6 +321,7 @@ mlx5_args(struct priv *priv, struct rte_devargs *devargs) - MLX5_TXQ_INLINE, - MLX5_TXQS_MIN_INLINE, - MLX5_TXQ_MPW_EN, -+ MLX5_TSO, - NULL, - }; - struct rte_kvargs *kvlist; -@@ -479,6 +485,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev) - IBV_EXP_DEVICE_ATTR_RX_HASH | - IBV_EXP_DEVICE_ATTR_VLAN_OFFLOADS | - IBV_EXP_DEVICE_ATTR_RX_PAD_END_ALIGN | -+ IBV_EXP_DEVICE_ATTR_TSO_CAPS | - 0; - - DEBUG("using port %u (%08" PRIx32 ")", port, test); -@@ -580,11 +587,22 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev) - - priv_get_num_vfs(priv, &num_vfs); - priv->sriov = (num_vfs || sriov); -+ priv->tso = ((priv->tso) && -+ (exp_device_attr.tso_caps.max_tso > 0) && -+ (exp_device_attr.tso_caps.supported_qpts & -+ (1 << IBV_QPT_RAW_ETH))); -+ if (priv->tso) -+ priv->max_tso_payload_sz = -+ exp_device_attr.tso_caps.max_tso; - if (priv->mps && !mps) { - ERROR("multi-packet send not supported on this device" - " (" MLX5_TXQ_MPW_EN ")"); - err = ENOTSUP; - goto port_error; -+ } else if (priv->mps && priv->tso) { -+ WARN("multi-packet send not supported in conjunction " -+ "with TSO. MPS disabled"); -+ priv->mps = 0; - } - /* Allocate and register default RSS hash keys. */ - priv->rss_conf = rte_calloc(__func__, hash_rxq_init_n, -diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h -index 4c4b9d4..93f129b 100644 ---- a/drivers/net/mlx5/mlx5.h -+++ b/drivers/net/mlx5/mlx5.h -@@ -126,6 +126,8 @@ struct priv { - unsigned int mps:1; /* Whether multi-packet send is supported. */ - unsigned int cqe_comp:1; /* Whether CQE compression is enabled. */ - unsigned int pending_alarm:1; /* An alarm is pending. */ -+ unsigned int tso:1; /* Whether TSO is supported. */ -+ unsigned int max_tso_payload_sz; /* Maximum TCP payload for TSO. */ - unsigned int txq_inline; /* Maximum packet size for inlining. */ - unsigned int txqs_inline; /* Queue number threshold for inlining. */ - /* RX/TX queues. */ -diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h -index e91d245..eecb908 100644 ---- a/drivers/net/mlx5/mlx5_defs.h -+++ b/drivers/net/mlx5/mlx5_defs.h -@@ -79,4 +79,7 @@ - /* Maximum number of extended statistics counters. */ - #define MLX5_MAX_XSTATS 32 - -+/* Maximum Packet headers size (L2+L3+L4) for TSO. */ -+#define MLX5_MAX_TSO_HEADER 128 -+ - #endif /* RTE_PMD_MLX5_DEFS_H_ */ -diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c -index 5677f03..5542193 100644 ---- a/drivers/net/mlx5/mlx5_ethdev.c -+++ b/drivers/net/mlx5/mlx5_ethdev.c -@@ -693,6 +693,8 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info) - (DEV_TX_OFFLOAD_IPV4_CKSUM | - DEV_TX_OFFLOAD_UDP_CKSUM | - DEV_TX_OFFLOAD_TCP_CKSUM); -+ if (priv->tso) -+ info->tx_offload_capa |= DEV_TX_OFFLOAD_TCP_TSO; - if (priv_get_ifname(priv, &ifname) == 0) - info->if_index = if_nametoindex(ifname); - /* FIXME: RETA update/query API expects the callee to know the size of -diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c -index 4d5455b..98889f6 100644 ---- a/drivers/net/mlx5/mlx5_rxtx.c -+++ b/drivers/net/mlx5/mlx5_rxtx.c -@@ -365,6 +365,7 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n) - const unsigned int elts_n = 1 << txq->elts_n; - unsigned int i = 0; - unsigned int j = 0; -+ unsigned int k = 0; - unsigned int max; - uint16_t max_wqe; - unsigned int comp; -@@ -392,8 +393,10 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n) - uintptr_t addr; - uint64_t naddr; - uint16_t pkt_inline_sz = MLX5_WQE_DWORD_SIZE + 2; -+ uint16_t tso_header_sz = 0; - uint16_t ehdr; - uint8_t cs_flags = 0; -+ uint64_t tso = 0; - #ifdef MLX5_PMD_SOFT_COUNTERS - uint32_t total_length = 0; - #endif -@@ -465,14 +468,74 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n) - length -= pkt_inline_sz; - addr += pkt_inline_sz; - } -+ if (txq->tso_en) { -+ tso = buf->ol_flags & PKT_TX_TCP_SEG; -+ if (tso) { -+ uintptr_t end = (uintptr_t) -+ (((uintptr_t)txq->wqes) + -+ (1 << txq->wqe_n) * -+ MLX5_WQE_SIZE); -+ unsigned int copy_b; -+ uint8_t vlan_sz = (buf->ol_flags & -+ PKT_TX_VLAN_PKT) ? 4 : 0; -+ -+ tso_header_sz = buf->l2_len + vlan_sz + -+ buf->l3_len + buf->l4_len; -+ -+ if (unlikely(tso_header_sz > -+ MLX5_MAX_TSO_HEADER)) -+ break; -+ copy_b = tso_header_sz - pkt_inline_sz; -+ /* First seg must contain all headers. */ -+ assert(copy_b <= length); -+ raw += MLX5_WQE_DWORD_SIZE; -+ if (copy_b && -+ ((end - (uintptr_t)raw) > copy_b)) { -+ uint16_t n = (MLX5_WQE_DS(copy_b) - -+ 1 + 3) / 4; -+ -+ if (unlikely(max_wqe < n)) -+ break; -+ max_wqe -= n; -+ rte_memcpy((void *)raw, -+ (void *)addr, copy_b); -+ addr += copy_b; -+ length -= copy_b; -+ pkt_inline_sz += copy_b; -+ /* -+ * Another DWORD will be added -+ * in the inline part. -+ */ -+ raw += MLX5_WQE_DS(copy_b) * -+ MLX5_WQE_DWORD_SIZE - -+ MLX5_WQE_DWORD_SIZE; -+ } else { -+ /* NOP WQE. */ -+ wqe->ctrl = (rte_v128u32_t){ -+ htonl(txq->wqe_ci << 8), -+ htonl(txq->qp_num_8s | 1), -+ 0, -+ 0, -+ }; -+ ds = 1; -+ total_length = 0; -+ pkts--; -+ pkts_n++; -+ elts_head = (elts_head - 1) & -+ (elts_n - 1); -+ k++; -+ goto next_wqe; -+ } -+ } -+ } - /* Inline if enough room. */ -- if (txq->max_inline) { -+ if (txq->inline_en || tso) { - uintptr_t end = (uintptr_t) - (((uintptr_t)txq->wqes) + - (1 << txq->wqe_n) * MLX5_WQE_SIZE); - unsigned int max_inline = txq->max_inline * - RTE_CACHE_LINE_SIZE - -- MLX5_WQE_DWORD_SIZE; -+ (pkt_inline_sz - 2); - uintptr_t addr_end = (addr + max_inline) & - ~(RTE_CACHE_LINE_SIZE - 1); - unsigned int copy_b = (addr_end > addr) ? -@@ -491,6 +554,18 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n) - if (unlikely(max_wqe < n)) - break; - max_wqe -= n; -+ if (tso) { -+ uint32_t inl = -+ htonl(copy_b | MLX5_INLINE_SEG); -+ -+ pkt_inline_sz = -+ MLX5_WQE_DS(tso_header_sz) * -+ MLX5_WQE_DWORD_SIZE; -+ rte_memcpy((void *)raw, -+ (void *)&inl, sizeof(inl)); -+ raw += sizeof(inl); -+ pkt_inline_sz += sizeof(inl); -+ } - rte_memcpy((void *)raw, (void *)addr, copy_b); - addr += copy_b; - length -= copy_b; -@@ -591,18 +666,34 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n) - next_pkt: - ++i; - /* Initialize known and common part of the WQE structure. */ -- wqe->ctrl = (rte_v128u32_t){ -- htonl((txq->wqe_ci << 8) | MLX5_OPCODE_SEND), -- htonl(txq->qp_num_8s | ds), -- 0, -- 0, -- }; -- wqe->eseg = (rte_v128u32_t){ -- 0, -- cs_flags, -- 0, -- (ehdr << 16) | htons(pkt_inline_sz), -- }; -+ if (tso) { -+ wqe->ctrl = (rte_v128u32_t){ -+ htonl((txq->wqe_ci << 8) | MLX5_OPCODE_TSO), -+ htonl(txq->qp_num_8s | ds), -+ 0, -+ 0, -+ }; -+ wqe->eseg = (rte_v128u32_t){ -+ 0, -+ cs_flags | (htons(buf->tso_segsz) << 16), -+ 0, -+ (ehdr << 16) | htons(tso_header_sz), -+ }; -+ } else { -+ wqe->ctrl = (rte_v128u32_t){ -+ htonl((txq->wqe_ci << 8) | MLX5_OPCODE_SEND), -+ htonl(txq->qp_num_8s | ds), -+ 0, -+ 0, -+ }; -+ wqe->eseg = (rte_v128u32_t){ -+ 0, -+ cs_flags, -+ 0, -+ (ehdr << 16) | htons(pkt_inline_sz), -+ }; -+ } -+next_wqe: - txq->wqe_ci += (ds + 3) / 4; - #ifdef MLX5_PMD_SOFT_COUNTERS - /* Increment sent bytes counter. */ -@@ -610,10 +701,10 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n) - #endif - } while (pkts_n); - /* Take a shortcut if nothing must be sent. */ -- if (unlikely(i == 0)) -+ if (unlikely((i + k) == 0)) - return 0; - /* Check whether completion threshold has been reached. */ -- comp = txq->elts_comp + i + j; -+ comp = txq->elts_comp + i + j + k; - if (comp >= MLX5_TX_COMP_THRESH) { - volatile struct mlx5_wqe_ctrl *w = - (volatile struct mlx5_wqe_ctrl *)wqe; -diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h -index 41a34d7..6b328cf 100644 ---- a/drivers/net/mlx5/mlx5_rxtx.h -+++ b/drivers/net/mlx5/mlx5_rxtx.h -@@ -254,6 +254,8 @@ struct txq { - uint16_t cqe_n:4; /* Number of CQ elements (in log2). */ - uint16_t wqe_n:4; /* Number of of WQ elements (in log2). */ - uint16_t max_inline; /* Multiple of RTE_CACHE_LINE_SIZE to inline. */ -+ uint16_t inline_en:1; /* When set inline is enabled. */ -+ uint16_t tso_en:1; /* When set hardware TSO is enabled. */ - uint32_t qp_num_8s; /* QP number shifted by 8. */ - volatile struct mlx5_cqe (*cqes)[]; /* Completion queue. */ - volatile void *wqes; /* Work queue (use volatile to write into). */ -diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c -index 949035b..995b763 100644 ---- a/drivers/net/mlx5/mlx5_txq.c -+++ b/drivers/net/mlx5/mlx5_txq.c -@@ -342,6 +342,19 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl, - RTE_CACHE_LINE_SIZE); - attr.init.cap.max_inline_data = - tmpl.txq.max_inline * RTE_CACHE_LINE_SIZE; -+ tmpl.txq.inline_en = 1; -+ } -+ if (priv->tso) { -+ uint16_t max_tso_inline = ((MLX5_MAX_TSO_HEADER + -+ (RTE_CACHE_LINE_SIZE - 1)) / -+ RTE_CACHE_LINE_SIZE); -+ -+ attr.init.max_tso_header = -+ max_tso_inline * RTE_CACHE_LINE_SIZE; -+ attr.init.comp_mask |= IBV_EXP_QP_INIT_ATTR_MAX_TSO_HEADER; -+ tmpl.txq.max_inline = RTE_MAX(tmpl.txq.max_inline, -+ max_tso_inline); -+ tmpl.txq.tso_en = 1; - } - tmpl.qp = ibv_exp_create_qp(priv->ctx, &attr.init); - if (tmpl.qp == NULL) { --- -2.7.4 - diff --git a/dpdk/dpdk-17.02_patches/0007-add-hardware-checksum-offload-for-tunnel-pa.patch b/dpdk/dpdk-17.02_patches/0007-add-hardware-checksum-offload-for-tunnel-pa.patch deleted file mode 100644 index bbcce486410..00000000000 --- a/dpdk/dpdk-17.02_patches/0007-add-hardware-checksum-offload-for-tunnel-pa.patch +++ /dev/null @@ -1,194 +0,0 @@ -From f0dda2ab16635894b1e3836d0b960b9270a3b491 Mon Sep 17 00:00:00 2001 -From: Shahaf Shuler -Date: Thu, 2 Mar 2017 11:05:44 +0200 -Subject: [PATCH] net/mlx5: add hardware checksum offload for tunnel packets - -Prior to this commit Tx checksum offload was supported only for the -inner headers. -This commit adds support for the hardware to compute the checksum for the -outer headers as well. - -The support is for tunneling protocols GRE and VXLAN. - -Signed-off-by: Shahaf Shuler -Acked-by: Nelio Laranjeiro ---- - doc/guides/nics/features/mlx5.ini | 2 ++ - doc/guides/nics/mlx5.rst | 3 ++- - drivers/net/mlx5/mlx5.c | 7 +++++++ - drivers/net/mlx5/mlx5.h | 2 ++ - drivers/net/mlx5/mlx5_ethdev.c | 2 ++ - drivers/net/mlx5/mlx5_prm.h | 6 ++++++ - drivers/net/mlx5/mlx5_rxtx.c | 14 +++++++++++++- - drivers/net/mlx5/mlx5_rxtx.h | 2 ++ - drivers/net/mlx5/mlx5_txq.c | 2 ++ - 9 files changed, 38 insertions(+), 2 deletions(-) - -diff --git a/doc/guides/nics/features/mlx5.ini b/doc/guides/nics/features/mlx5.ini -index 8df25ce..1814f82 100644 ---- a/doc/guides/nics/features/mlx5.ini -+++ b/doc/guides/nics/features/mlx5.ini -@@ -27,6 +27,8 @@ CRC offload = Y - VLAN offload = Y - L3 checksum offload = Y - L4 checksum offload = Y -+Inner L3 checksum = Y -+Inner L4 checksum = Y - Packet type parsing = Y - Basic stats = Y - Stats per queue = Y -diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst -index 9b0ba29..41f3a47 100644 ---- a/doc/guides/nics/mlx5.rst -+++ b/doc/guides/nics/mlx5.rst -@@ -91,13 +91,14 @@ Features - - KVM and VMware ESX SR-IOV modes are supported. - - RSS hash result is supported. - - Hardware TSO. -+- Hardware checksum TX offload for VXLAN and GRE. - - Limitations - ----------- - - - Inner RSS for VXLAN frames is not supported yet. - - Port statistics through software counters only. --- Hardware checksum offloads for VXLAN inner header are not supported yet. -+- Hardware checksum RX offloads for VXLAN inner header are not supported yet. - - Secondary process RX is not supported. - - Configuration -diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c -index 03ed3b3..6f42948 100644 ---- a/drivers/net/mlx5/mlx5.c -+++ b/drivers/net/mlx5/mlx5.c -@@ -375,6 +375,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev) - struct ibv_device_attr device_attr; - unsigned int sriov; - unsigned int mps; -+ unsigned int tunnel_en; - int idx; - int i; - -@@ -429,12 +430,17 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev) - * as all ConnectX-5 devices. - */ - switch (pci_dev->id.device_id) { -+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4: -+ tunnel_en = 1; -+ mps = 0; -+ break; - case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX: - case PCI_DEVICE_ID_MELLANOX_CONNECTX5: - case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF: - case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX: - case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF: - mps = 1; -+ tunnel_en = 1; - break; - default: - mps = 0; -@@ -539,6 +545,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev) - priv->mtu = ETHER_MTU; - priv->mps = mps; /* Enable MPW by default if supported. */ - priv->cqe_comp = 1; /* Enable compression by default. */ -+ priv->tunnel_en = tunnel_en; - err = mlx5_args(priv, pci_dev->device.devargs); - if (err) { - ERROR("failed to process device arguments: %s", -diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h -index 93f129b..870e01f 100644 ---- a/drivers/net/mlx5/mlx5.h -+++ b/drivers/net/mlx5/mlx5.h -@@ -127,6 +127,8 @@ struct priv { - unsigned int cqe_comp:1; /* Whether CQE compression is enabled. */ - unsigned int pending_alarm:1; /* An alarm is pending. */ - unsigned int tso:1; /* Whether TSO is supported. */ -+ unsigned int tunnel_en:1; -+ /* Whether Tx offloads for tunneled packets are supported. */ - unsigned int max_tso_payload_sz; /* Maximum TCP payload for TSO. */ - unsigned int txq_inline; /* Maximum packet size for inlining. */ - unsigned int txqs_inline; /* Queue number threshold for inlining. */ -diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c -index 5542193..8be9e77 100644 ---- a/drivers/net/mlx5/mlx5_ethdev.c -+++ b/drivers/net/mlx5/mlx5_ethdev.c -@@ -695,6 +695,8 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info) - DEV_TX_OFFLOAD_TCP_CKSUM); - if (priv->tso) - info->tx_offload_capa |= DEV_TX_OFFLOAD_TCP_TSO; -+ if (priv->tunnel_en) -+ info->tx_offload_capa |= DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM; - if (priv_get_ifname(priv, &ifname) == 0) - info->if_index = if_nametoindex(ifname); - /* FIXME: RETA update/query API expects the callee to know the size of -diff --git a/drivers/net/mlx5/mlx5_prm.h b/drivers/net/mlx5/mlx5_prm.h -index 3318668..0a77f5b 100644 ---- a/drivers/net/mlx5/mlx5_prm.h -+++ b/drivers/net/mlx5/mlx5_prm.h -@@ -120,6 +120,12 @@ - /* Tunnel packet bit in the CQE. */ - #define MLX5_CQE_RX_TUNNEL_PACKET (1u << 0) - -+/* Inner L3 checksum offload (Tunneled packets only). */ -+#define MLX5_ETH_WQE_L3_INNER_CSUM (1u << 4) -+ -+/* Inner L4 checksum offload (Tunneled packets only). */ -+#define MLX5_ETH_WQE_L4_INNER_CSUM (1u << 5) -+ - /* INVALID is used by packets matching no flow rules. */ - #define MLX5_FLOW_MARK_INVALID 0 - -diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c -index 98889f6..c2eb891 100644 ---- a/drivers/net/mlx5/mlx5_rxtx.c -+++ b/drivers/net/mlx5/mlx5_rxtx.c -@@ -443,7 +443,19 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n) - /* Should we enable HW CKSUM offload */ - if (buf->ol_flags & - (PKT_TX_IP_CKSUM | PKT_TX_TCP_CKSUM | PKT_TX_UDP_CKSUM)) { -- cs_flags = MLX5_ETH_WQE_L3_CSUM | MLX5_ETH_WQE_L4_CSUM; -+ const uint64_t is_tunneled = buf->ol_flags & -+ (PKT_TX_TUNNEL_GRE | -+ PKT_TX_TUNNEL_VXLAN); -+ -+ if (is_tunneled && txq->tunnel_en) { -+ cs_flags = MLX5_ETH_WQE_L3_INNER_CSUM | -+ MLX5_ETH_WQE_L4_INNER_CSUM; -+ if (buf->ol_flags & PKT_TX_OUTER_IP_CKSUM) -+ cs_flags |= MLX5_ETH_WQE_L3_CSUM; -+ } else { -+ cs_flags = MLX5_ETH_WQE_L3_CSUM | -+ MLX5_ETH_WQE_L4_CSUM; -+ } - } - raw = ((uint8_t *)(uintptr_t)wqe) + 2 * MLX5_WQE_DWORD_SIZE; - /* Replace the Ethernet type by the VLAN if necessary. */ -diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h -index 6b328cf..9669564 100644 ---- a/drivers/net/mlx5/mlx5_rxtx.h -+++ b/drivers/net/mlx5/mlx5_rxtx.h -@@ -256,6 +256,8 @@ struct txq { - uint16_t max_inline; /* Multiple of RTE_CACHE_LINE_SIZE to inline. */ - uint16_t inline_en:1; /* When set inline is enabled. */ - uint16_t tso_en:1; /* When set hardware TSO is enabled. */ -+ uint16_t tunnel_en:1; -+ /* When set TX offload for tunneled packets are supported. */ - uint32_t qp_num_8s; /* QP number shifted by 8. */ - volatile struct mlx5_cqe (*cqes)[]; /* Completion queue. */ - volatile void *wqes; /* Work queue (use volatile to write into). */ -diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c -index 995b763..9d0c00f 100644 ---- a/drivers/net/mlx5/mlx5_txq.c -+++ b/drivers/net/mlx5/mlx5_txq.c -@@ -356,6 +356,8 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl, - max_tso_inline); - tmpl.txq.tso_en = 1; - } -+ if (priv->tunnel_en) -+ tmpl.txq.tunnel_en = 1; - tmpl.qp = ibv_exp_create_qp(priv->ctx, &attr.init); - if (tmpl.qp == NULL) { - ret = (errno ? errno : EINVAL); --- -2.7.4 - diff --git a/dpdk/dpdk-17.02_patches/0008-net-mlx5-add-enhanced-multi-packet-send-for-ConnectX.patch b/dpdk/dpdk-17.02_patches/0008-net-mlx5-add-enhanced-multi-packet-send-for-ConnectX.patch deleted file mode 100644 index 6ff076c71f5..00000000000 --- a/dpdk/dpdk-17.02_patches/0008-net-mlx5-add-enhanced-multi-packet-send-for-ConnectX.patch +++ /dev/null @@ -1,809 +0,0 @@ -From 7ca5c8de65acabe4cb60960adcfa9247efdd2a5c Mon Sep 17 00:00:00 2001 -From: Yongseok Koh -Date: Wed, 15 Mar 2017 16:55:44 -0700 -Subject: [PATCH] net/mlx5: add enhanced multi-packet send for ConnectX-5 - -ConnectX-5 supports enhanced version of multi-packet send (MPS). An MPS Tx -descriptor can carry multiple packets either by including pointers of -packets or by inlining packets. Inlining packet data can be helpful to -better utilize PCIe bandwidth. In addition, Enhanced MPS supports hybrid -mode - mixing inlined packets and pointers in a descriptor. This feature is -enabled by default if supported by HW. - -Signed-off-by: Yongseok Koh ---- - doc/guides/nics/mlx5.rst | 31 +++- - drivers/net/mlx5/mlx5.c | 37 +++- - drivers/net/mlx5/mlx5.h | 4 +- - drivers/net/mlx5/mlx5_defs.h | 7 + - drivers/net/mlx5/mlx5_ethdev.c | 6 +- - drivers/net/mlx5/mlx5_prm.h | 20 ++ - drivers/net/mlx5/mlx5_rxtx.c | 410 +++++++++++++++++++++++++++++++++++++++++ - drivers/net/mlx5/mlx5_rxtx.h | 7 +- - drivers/net/mlx5/mlx5_txq.c | 29 ++- - 9 files changed, 534 insertions(+), 17 deletions(-) - -diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst -index 41f3a47..0783aeb 100644 ---- a/doc/guides/nics/mlx5.rst -+++ b/doc/guides/nics/mlx5.rst -@@ -183,10 +183,17 @@ Run-time configuration - - - ``txq_mpw_en`` parameter [int] - -- A nonzero value enables multi-packet send. This feature allows the TX -- burst function to pack up to five packets in two descriptors in order to -- save PCI bandwidth and improve performance at the cost of a slightly -- higher CPU usage. -+ A nonzero value enables multi-packet send (MPS) for ConnectX-4 Lx and -+ enhanced multi-packet send (Enhanced MPS) for ConnectX-5. MPS allows the -+ TX burst function to pack up multiple packets in a single descriptor -+ session in order to save PCI bandwidth and improve performance at the -+ cost of a slightly higher CPU usage. When ``txq_inline`` is set along -+ with ``txq_mpw_en``, TX burst function tries to copy entire packet data -+ on to TX descriptor instead of including pointer of packet only if there -+ is enough room remained in the descriptor. ``txq_inline`` sets -+ per-descriptor space for either pointers or inlined packets. In addition, -+ Enhanced MPS supports hybrid mode - mixing inlined packets and pointers -+ in the same descriptor. - - This option cannot be used in conjunction with ``tso`` below. When ``tso`` - is set, ``txq_mpw_en`` is disabled. -@@ -194,6 +201,22 @@ Run-time configuration - It is currently only supported on the ConnectX-4 Lx and ConnectX-5 - families of adapters. Enabled by default. - -+- ``txq_mpw_hdr_dseg_en`` parameter [int] -+ -+ A nonzero value enables including two pointers in the first block of TX -+ descriptor. This can be used to lessen CPU load for memory copy. -+ -+ Effective only when Enhanced MPS is supported. Disabled by default. -+ -+- ``txq_max_inline_len`` parameter [int] -+ -+ Maximum size of packet to be inlined. This limits the size of packet to -+ be inlined. If the size of a packet is larger than configured value, the -+ packet isn't inlined even though there's enough space remained in the -+ descriptor. Instead, the packet is included with pointer. -+ -+ Effective only when Enhanced MPS is supported. The default value is 256. -+ - - ``tso`` parameter [int] - - A nonzero value enables hardware TSO. -diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c -index ebc7984..bc6a34f 100644 ---- a/drivers/net/mlx5/mlx5.c -+++ b/drivers/net/mlx5/mlx5.c -@@ -84,6 +84,12 @@ - /* Device parameter to enable multi-packet send WQEs. */ - #define MLX5_TXQ_MPW_EN "txq_mpw_en" - -+/* Device parameter to include 2 dsegs in the title WQEBB. */ -+#define MLX5_TXQ_MPW_HDR_DSEG_EN "txq_mpw_hdr_dseg_en" -+ -+/* Device parameter to limit the size of inlining packet. */ -+#define MLX5_TXQ_MAX_INLINE_LEN "txq_max_inline_len" -+ - /* Device parameter to enable hardware TSO offload. */ - #define MLX5_TSO "tso" - -@@ -294,7 +300,11 @@ mlx5_args_check(const char *key, const char *val, void *opaque) - } else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) { - priv->txqs_inline = tmp; - } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) { -- priv->mps &= !!tmp; /* Enable MPW only if HW supports */ -+ priv->mps = !!tmp ? priv->mps : MLX5_MPW_DISABLED; -+ } else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) { -+ priv->mpw_hdr_dseg = !!tmp; -+ } else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) { -+ priv->inline_max_packet_sz = tmp; - } else if (strcmp(MLX5_TSO, key) == 0) { - priv->tso = !!tmp; - } else { -@@ -323,6 +333,8 @@ mlx5_args(struct priv *priv, struct rte_devargs *devargs) - MLX5_TXQ_INLINE, - MLX5_TXQS_MIN_INLINE, - MLX5_TXQ_MPW_EN, -+ MLX5_TXQ_MPW_HDR_DSEG_EN, -+ MLX5_TXQ_MAX_INLINE_LEN, - MLX5_TSO, - NULL, - }; -@@ -434,24 +446,27 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev) - switch (pci_dev->id.device_id) { - case PCI_DEVICE_ID_MELLANOX_CONNECTX4: - tunnel_en = 1; -- mps = 0; -+ mps = MLX5_MPW_DISABLED; - break; - case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX: -+ mps = MLX5_MPW; -+ break; - case PCI_DEVICE_ID_MELLANOX_CONNECTX5: - case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF: - case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX: - case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF: -- mps = 1; - tunnel_en = 1; -+ mps = MLX5_MPW_ENHANCED; - break; - default: -- mps = 0; -+ mps = MLX5_MPW_DISABLED; - } - INFO("PCI information matches, using device \"%s\"" -- " (SR-IOV: %s, MPS: %s)", -+ " (SR-IOV: %s, %sMPS: %s)", - list[i]->name, - sriov ? "true" : "false", -- mps ? "true" : "false"); -+ mps == MLX5_MPW_ENHANCED ? "Enhanced " : "", -+ mps != MLX5_MPW_DISABLED ? "true" : "false"); - attr_ctx = ibv_open_device(list[i]); - err = errno; - break; -@@ -546,6 +561,13 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev) - priv->pd = pd; - priv->mtu = ETHER_MTU; - priv->mps = mps; /* Enable MPW by default if supported. */ -+ /* Set default values for Enhanced MPW, a.k.a MPWv2. */ -+ if (mps == MLX5_MPW_ENHANCED) { -+ priv->mpw_hdr_dseg = 0; -+ priv->txqs_inline = MLX5_EMPW_MIN_TXQS; -+ priv->inline_max_packet_sz = MLX5_EMPW_MAX_INLINE_LEN; -+ priv->txq_inline = MLX5_WQE_SIZE_MAX - MLX5_WQE_SIZE; -+ } - priv->cqe_comp = 1; /* Enable compression by default. */ - priv->tunnel_en = tunnel_en; - err = mlx5_args(priv, pci_dev->device.devargs); -@@ -613,6 +635,9 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev) - "with TSO. MPS disabled"); - priv->mps = 0; - } -+ INFO("%sMPS is %s", -+ priv->mps == MLX5_MPW_ENHANCED ? "Enhanced " : "", -+ priv->mps != MLX5_MPW_DISABLED ? "enabled" : "disabled"); - /* Allocate and register default RSS hash keys. */ - priv->rss_conf = rte_calloc(__func__, hash_rxq_init_n, - sizeof((*priv->rss_conf)[0]), 0); -diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h -index 870e01f..d26d465 100644 ---- a/drivers/net/mlx5/mlx5.h -+++ b/drivers/net/mlx5/mlx5.h -@@ -123,7 +123,8 @@ struct priv { - unsigned int hw_fcs_strip:1; /* FCS stripping is supported. */ - unsigned int hw_padding:1; /* End alignment padding is supported. */ - unsigned int sriov:1; /* This is a VF or PF with VF devices. */ -- unsigned int mps:1; /* Whether multi-packet send is supported. */ -+ unsigned int mps:2; /* Multi-packet send mode (0: disabled). */ -+ unsigned int mpw_hdr_dseg:1; /* Enable DSEGs in the title WQEBB. */ - unsigned int cqe_comp:1; /* Whether CQE compression is enabled. */ - unsigned int pending_alarm:1; /* An alarm is pending. */ - unsigned int tso:1; /* Whether TSO is supported. */ -@@ -132,6 +133,7 @@ struct priv { - unsigned int max_tso_payload_sz; /* Maximum TCP payload for TSO. */ - unsigned int txq_inline; /* Maximum packet size for inlining. */ - unsigned int txqs_inline; /* Queue number threshold for inlining. */ -+ unsigned int inline_max_packet_sz; /* Max packet size for inlining. */ - /* RX/TX queues. */ - unsigned int rxqs_n; /* RX queues array size. */ - unsigned int txqs_n; /* TX queues array size. */ -diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h -index eecb908..201bb33 100644 ---- a/drivers/net/mlx5/mlx5_defs.h -+++ b/drivers/net/mlx5/mlx5_defs.h -@@ -55,6 +55,13 @@ - #define MLX5_TX_COMP_THRESH 32 - - /* -+ * Request TX completion every time the total number of WQEBBs used for inlining -+ * packets exceeds the size of WQ divided by this divisor. Better to be power of -+ * two for performance. -+ */ -+#define MLX5_TX_COMP_THRESH_INLINE_DIV (1 << 3) -+ -+/* - * Maximum number of cached Memory Pools (MPs) per TX queue. Each RTE MP - * from which buffers are to be transmitted will have to be mapped by this - * driver to their own Memory Region (MR). This is a slow operation. -diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c -index 5deb6e8..dd5fe5c 100644 ---- a/drivers/net/mlx5/mlx5_ethdev.c -+++ b/drivers/net/mlx5/mlx5_ethdev.c -@@ -1590,7 +1590,11 @@ priv_select_tx_function(struct priv *priv) - { - priv->dev->tx_pkt_burst = mlx5_tx_burst; - /* Select appropriate TX function. */ -- if (priv->mps && priv->txq_inline) { -+ if (priv->mps == MLX5_MPW_ENHANCED) { -+ priv->dev->tx_pkt_burst = -+ mlx5_tx_burst_empw; -+ DEBUG("selected Enhanced MPW TX function"); -+ } else if (priv->mps && priv->txq_inline) { - priv->dev->tx_pkt_burst = mlx5_tx_burst_mpw_inline; - DEBUG("selected MPW inline TX function"); - } else if (priv->mps) { -diff --git a/drivers/net/mlx5/mlx5_prm.h b/drivers/net/mlx5/mlx5_prm.h -index 0a77f5b..155bdba 100644 ---- a/drivers/net/mlx5/mlx5_prm.h -+++ b/drivers/net/mlx5/mlx5_prm.h -@@ -73,6 +73,9 @@ - /* WQE size */ - #define MLX5_WQE_SIZE (4 * MLX5_WQE_DWORD_SIZE) - -+/* Max size of a WQE session. */ -+#define MLX5_WQE_SIZE_MAX 960U -+ - /* Compute the number of DS. */ - #define MLX5_WQE_DS(n) \ - (((n) + MLX5_WQE_DWORD_SIZE - 1) / MLX5_WQE_DWORD_SIZE) -@@ -80,10 +83,19 @@ - /* Room for inline data in multi-packet WQE. */ - #define MLX5_MWQE64_INL_DATA 28 - -+/* Default minimum number of Tx queues for inlining packets. */ -+#define MLX5_EMPW_MIN_TXQS 8 -+ -+/* Default max packet length to be inlined. */ -+#define MLX5_EMPW_MAX_INLINE_LEN (4U * MLX5_WQE_SIZE) -+ - #ifndef HAVE_VERBS_MLX5_OPCODE_TSO - #define MLX5_OPCODE_TSO MLX5_OPCODE_LSO_MPW /* Compat with OFED 3.3. */ - #endif - -+#define MLX5_OPC_MOD_ENHANCED_MPSW 0 -+#define MLX5_OPCODE_ENHANCED_MPSW 0x29 -+ - /* CQE value to inform that VLAN is stripped. */ - #define MLX5_CQE_VLAN_STRIPPED (1u << 0) - -@@ -176,10 +188,18 @@ struct mlx5_wqe64 { - uint8_t raw[32]; - } __rte_aligned(MLX5_WQE_SIZE); - -+/* MPW mode. */ -+enum mlx5_mpw_mode { -+ MLX5_MPW_DISABLED, -+ MLX5_MPW, -+ MLX5_MPW_ENHANCED, /* Enhanced Multi-Packet Send WQE, a.k.a MPWv2. */ -+}; -+ - /* MPW session status. */ - enum mlx5_mpw_state { - MLX5_MPW_STATE_OPENED, - MLX5_MPW_INL_STATE_OPENED, -+ MLX5_MPW_ENHANCED_STATE_OPENED, - MLX5_MPW_STATE_CLOSED, - }; - -diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c -index 9fc433e..a1dd84a 100644 ---- a/drivers/net/mlx5/mlx5_rxtx.c -+++ b/drivers/net/mlx5/mlx5_rxtx.c -@@ -195,6 +195,62 @@ tx_mlx5_wqe(struct txq *txq, uint16_t ci) - } - - /** -+ * Return the size of tailroom of WQ. -+ * -+ * @param txq -+ * Pointer to TX queue structure. -+ * @param addr -+ * Pointer to tail of WQ. -+ * -+ * @return -+ * Size of tailroom. -+ */ -+static inline size_t -+tx_mlx5_wq_tailroom(struct txq *txq, void *addr) -+{ -+ size_t tailroom; -+ tailroom = (uintptr_t)(txq->wqes) + -+ (1 << txq->wqe_n) * MLX5_WQE_SIZE - -+ (uintptr_t)addr; -+ return tailroom; -+} -+ -+/** -+ * Copy data to tailroom of circular queue. -+ * -+ * @param dst -+ * Pointer to destination. -+ * @param src -+ * Pointer to source. -+ * @param n -+ * Number of bytes to copy. -+ * @param base -+ * Pointer to head of queue. -+ * @param tailroom -+ * Size of tailroom from dst. -+ * -+ * @return -+ * Pointer after copied data. -+ */ -+static inline void * -+mlx5_copy_to_wq(void *dst, const void *src, size_t n, -+ void *base, size_t tailroom) -+{ -+ void *ret; -+ -+ if (n > tailroom) { -+ rte_memcpy(dst, src, tailroom); -+ rte_memcpy(base, (void *)((uintptr_t)src + tailroom), -+ n - tailroom); -+ ret = (uint8_t *)base + n - tailroom; -+ } else { -+ rte_memcpy(dst, src, n); -+ ret = (n == tailroom) ? base : (uint8_t *)dst + n; -+ } -+ return ret; -+} -+ -+/** - * Manage TX completions. - * - * When sending a burst, mlx5_tx_burst() posts several WRs. -@@ -1269,6 +1325,360 @@ mlx5_tx_burst_mpw_inline(void *dpdk_txq, struct rte_mbuf **pkts, - } - - /** -+ * Open an Enhanced MPW session. -+ * -+ * @param txq -+ * Pointer to TX queue structure. -+ * @param mpw -+ * Pointer to MPW session structure. -+ * @param length -+ * Packet length. -+ */ -+static inline void -+mlx5_empw_new(struct txq *txq, struct mlx5_mpw *mpw, int padding) -+{ -+ uint16_t idx = txq->wqe_ci & ((1 << txq->wqe_n) - 1); -+ -+ mpw->state = MLX5_MPW_ENHANCED_STATE_OPENED; -+ mpw->pkts_n = 0; -+ mpw->total_len = sizeof(struct mlx5_wqe); -+ mpw->wqe = (volatile struct mlx5_wqe *)tx_mlx5_wqe(txq, idx); -+ mpw->wqe->ctrl[0] = htonl((MLX5_OPC_MOD_ENHANCED_MPSW << 24) | -+ (txq->wqe_ci << 8) | -+ MLX5_OPCODE_ENHANCED_MPSW); -+ mpw->wqe->ctrl[2] = 0; -+ mpw->wqe->ctrl[3] = 0; -+ memset((void *)(uintptr_t)&mpw->wqe->eseg, 0, MLX5_WQE_DWORD_SIZE); -+ if (unlikely(padding)) { -+ uintptr_t addr = (uintptr_t)(mpw->wqe + 1); -+ -+ /* Pad the first 2 DWORDs with zero-length inline header. */ -+ *(volatile uint32_t *)addr = htonl(MLX5_INLINE_SEG); -+ *(volatile uint32_t *)(addr + MLX5_WQE_DWORD_SIZE) = -+ htonl(MLX5_INLINE_SEG); -+ mpw->total_len += 2 * MLX5_WQE_DWORD_SIZE; -+ /* Start from the next WQEBB. */ -+ mpw->data.raw = (volatile void *)(tx_mlx5_wqe(txq, idx + 1)); -+ } else { -+ mpw->data.raw = (volatile void *)(mpw->wqe + 1); -+ } -+} -+ -+/** -+ * Close an Enhanced MPW session. -+ * -+ * @param txq -+ * Pointer to TX queue structure. -+ * @param mpw -+ * Pointer to MPW session structure. -+ * -+ * @return -+ * Number of consumed WQEs. -+ */ -+static inline uint16_t -+mlx5_empw_close(struct txq *txq, struct mlx5_mpw *mpw) -+{ -+ uint16_t ret; -+ -+ /* Store size in multiple of 16 bytes. Control and Ethernet segments -+ * count as 2. -+ */ -+ mpw->wqe->ctrl[1] = htonl(txq->qp_num_8s | MLX5_WQE_DS(mpw->total_len)); -+ mpw->state = MLX5_MPW_STATE_CLOSED; -+ ret = (mpw->total_len + (MLX5_WQE_SIZE - 1)) / MLX5_WQE_SIZE; -+ txq->wqe_ci += ret; -+ return ret; -+} -+ -+/** -+ * DPDK callback for TX with Enhanced MPW support. -+ * -+ * @param dpdk_txq -+ * Generic pointer to TX queue structure. -+ * @param[in] pkts -+ * Packets to transmit. -+ * @param pkts_n -+ * Number of packets in array. -+ * -+ * @return -+ * Number of packets successfully transmitted (<= pkts_n). -+ */ -+uint16_t -+mlx5_tx_burst_empw(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n) -+{ -+ struct txq *txq = (struct txq *)dpdk_txq; -+ uint16_t elts_head = txq->elts_head; -+ const unsigned int elts_n = 1 << txq->elts_n; -+ unsigned int i = 0; -+ unsigned int j = 0; -+ unsigned int max_elts; -+ uint16_t max_wqe; -+ unsigned int max_inline = txq->max_inline * RTE_CACHE_LINE_SIZE; -+ unsigned int mpw_room = 0; -+ unsigned int inl_pad = 0; -+ uint32_t inl_hdr; -+ struct mlx5_mpw mpw = { -+ .state = MLX5_MPW_STATE_CLOSED, -+ }; -+ -+ if (unlikely(!pkts_n)) -+ return 0; -+ /* Start processing. */ -+ txq_complete(txq); -+ max_elts = (elts_n - (elts_head - txq->elts_tail)); -+ if (max_elts > elts_n) -+ max_elts -= elts_n; -+ /* A CQE slot must always be available. */ -+ assert((1u << txq->cqe_n) - (txq->cq_pi - txq->cq_ci)); -+ max_wqe = (1u << txq->wqe_n) - (txq->wqe_ci - txq->wqe_pi); -+ if (unlikely(!max_wqe)) -+ return 0; -+ do { -+ struct rte_mbuf *buf = *(pkts++); -+ unsigned int elts_head_next; -+ uintptr_t addr; -+ uint64_t naddr; -+ unsigned int n; -+ unsigned int do_inline = 0; /* Whether inline is possible. */ -+ uint32_t length; -+ unsigned int segs_n = buf->nb_segs; -+ uint32_t cs_flags = 0; -+ -+ /* -+ * Make sure there is enough room to store this packet and -+ * that one ring entry remains unused. -+ */ -+ assert(segs_n); -+ if (max_elts - j < segs_n + 1) -+ break; -+ /* Do not bother with large packets MPW cannot handle. */ -+ if (segs_n > MLX5_MPW_DSEG_MAX) -+ break; -+ /* Should we enable HW CKSUM offload. */ -+ if (buf->ol_flags & -+ (PKT_TX_IP_CKSUM | PKT_TX_TCP_CKSUM | PKT_TX_UDP_CKSUM)) -+ cs_flags = MLX5_ETH_WQE_L3_CSUM | MLX5_ETH_WQE_L4_CSUM; -+ /* Retrieve packet information. */ -+ length = PKT_LEN(buf); -+ /* Start new session if: -+ * - multi-segment packet -+ * - no space left even for a dseg -+ * - next packet can be inlined with a new WQE -+ * - cs_flag differs -+ * It can't be MLX5_MPW_STATE_OPENED as always have a single -+ * segmented packet. -+ */ -+ if (mpw.state == MLX5_MPW_ENHANCED_STATE_OPENED) { -+ if ((segs_n != 1) || -+ (inl_pad + sizeof(struct mlx5_wqe_data_seg) > -+ mpw_room) || -+ (length <= txq->inline_max_packet_sz && -+ inl_pad + sizeof(inl_hdr) + length > -+ mpw_room) || -+ (mpw.wqe->eseg.cs_flags != cs_flags)) -+ max_wqe -= mlx5_empw_close(txq, &mpw); -+ } -+ if (unlikely(mpw.state == MLX5_MPW_STATE_CLOSED)) { -+ if (unlikely(segs_n != 1)) { -+ /* Fall back to legacy MPW. -+ * A MPW session consumes 2 WQEs at most to -+ * include MLX5_MPW_DSEG_MAX pointers. -+ */ -+ if (unlikely(max_wqe < 2)) -+ break; -+ mlx5_mpw_new(txq, &mpw, length); -+ } else { -+ /* In Enhanced MPW, inline as much as the budget -+ * is allowed. The remaining space is to be -+ * filled with dsegs. If the title WQEBB isn't -+ * padded, it will have 2 dsegs there. -+ */ -+ mpw_room = RTE_MIN(MLX5_WQE_SIZE_MAX, -+ (max_inline ? max_inline : -+ pkts_n * MLX5_WQE_DWORD_SIZE) + -+ MLX5_WQE_SIZE); -+ if (unlikely(max_wqe * MLX5_WQE_SIZE < -+ mpw_room)) -+ break; -+ /* Don't pad the title WQEBB to not waste WQ. */ -+ mlx5_empw_new(txq, &mpw, 0); -+ mpw_room -= mpw.total_len; -+ inl_pad = 0; -+ do_inline = -+ length <= txq->inline_max_packet_sz && -+ sizeof(inl_hdr) + length <= mpw_room && -+ !txq->mpw_hdr_dseg; -+ } -+ mpw.wqe->eseg.cs_flags = cs_flags; -+ } else { -+ /* Evaluate whether the next packet can be inlined. -+ * Inlininig is possible when: -+ * - length is less than configured value -+ * - length fits for remaining space -+ * - not required to fill the title WQEBB with dsegs -+ */ -+ do_inline = -+ length <= txq->inline_max_packet_sz && -+ inl_pad + sizeof(inl_hdr) + length <= -+ mpw_room && -+ (!txq->mpw_hdr_dseg || -+ mpw.total_len >= MLX5_WQE_SIZE); -+ } -+ /* Multi-segment packets must be alone in their MPW. */ -+ assert((segs_n == 1) || (mpw.pkts_n == 0)); -+ if (unlikely(mpw.state == MLX5_MPW_STATE_OPENED)) { -+#if defined(MLX5_PMD_SOFT_COUNTERS) || !defined(NDEBUG) -+ length = 0; -+#endif -+ do { -+ volatile struct mlx5_wqe_data_seg *dseg; -+ -+ elts_head_next = -+ (elts_head + 1) & (elts_n - 1); -+ assert(buf); -+ (*txq->elts)[elts_head] = buf; -+ dseg = mpw.data.dseg[mpw.pkts_n]; -+ addr = rte_pktmbuf_mtod(buf, uintptr_t); -+ *dseg = (struct mlx5_wqe_data_seg){ -+ .byte_count = htonl(DATA_LEN(buf)), -+ .lkey = txq_mp2mr(txq, txq_mb2mp(buf)), -+ .addr = htonll(addr), -+ }; -+ elts_head = elts_head_next; -+#if defined(MLX5_PMD_SOFT_COUNTERS) || !defined(NDEBUG) -+ length += DATA_LEN(buf); -+#endif -+ buf = buf->next; -+ ++j; -+ ++mpw.pkts_n; -+ } while (--segs_n); -+ /* A multi-segmented packet takes one MPW session. -+ * TODO: Pack more multi-segmented packets if possible. -+ */ -+ mlx5_mpw_close(txq, &mpw); -+ if (mpw.pkts_n < 3) -+ max_wqe--; -+ else -+ max_wqe -= 2; -+ } else if (do_inline) { -+ /* Inline packet into WQE. */ -+ unsigned int max; -+ -+ assert(mpw.state == MLX5_MPW_ENHANCED_STATE_OPENED); -+ assert(length == DATA_LEN(buf)); -+ inl_hdr = htonl(length | MLX5_INLINE_SEG); -+ addr = rte_pktmbuf_mtod(buf, uintptr_t); -+ mpw.data.raw = (volatile void *) -+ ((uintptr_t)mpw.data.raw + inl_pad); -+ max = tx_mlx5_wq_tailroom(txq, -+ (void *)(uintptr_t)mpw.data.raw); -+ /* Copy inline header. */ -+ mpw.data.raw = (volatile void *) -+ mlx5_copy_to_wq( -+ (void *)(uintptr_t)mpw.data.raw, -+ &inl_hdr, -+ sizeof(inl_hdr), -+ (void *)(uintptr_t)txq->wqes, -+ max); -+ max = tx_mlx5_wq_tailroom(txq, -+ (void *)(uintptr_t)mpw.data.raw); -+ /* Copy packet data. */ -+ mpw.data.raw = (volatile void *) -+ mlx5_copy_to_wq( -+ (void *)(uintptr_t)mpw.data.raw, -+ (void *)addr, -+ length, -+ (void *)(uintptr_t)txq->wqes, -+ max); -+ ++mpw.pkts_n; -+ mpw.total_len += (inl_pad + sizeof(inl_hdr) + length); -+ /* No need to get completion as the entire packet is -+ * copied to WQ. Free the buf right away. -+ */ -+ elts_head_next = elts_head; -+ rte_pktmbuf_free_seg(buf); -+ mpw_room -= (inl_pad + sizeof(inl_hdr) + length); -+ /* Add pad in the next packet if any. */ -+ inl_pad = (((uintptr_t)mpw.data.raw + -+ (MLX5_WQE_DWORD_SIZE - 1)) & -+ ~(MLX5_WQE_DWORD_SIZE - 1)) - -+ (uintptr_t)mpw.data.raw; -+ } else { -+ /* No inline. Load a dseg of packet pointer. */ -+ volatile rte_v128u32_t *dseg; -+ -+ assert(mpw.state == MLX5_MPW_ENHANCED_STATE_OPENED); -+ assert((inl_pad + sizeof(*dseg)) <= mpw_room); -+ assert(length == DATA_LEN(buf)); -+ if (!tx_mlx5_wq_tailroom(txq, -+ (void *)((uintptr_t)mpw.data.raw -+ + inl_pad))) -+ dseg = (volatile void *)txq->wqes; -+ else -+ dseg = (volatile void *) -+ ((uintptr_t)mpw.data.raw + -+ inl_pad); -+ elts_head_next = (elts_head + 1) & (elts_n - 1); -+ (*txq->elts)[elts_head] = buf; -+ addr = rte_pktmbuf_mtod(buf, uintptr_t); -+ for (n = 0; n * RTE_CACHE_LINE_SIZE < length; n++) -+ rte_prefetch2((void *)(addr + -+ n * RTE_CACHE_LINE_SIZE)); -+ naddr = htonll(addr); -+ *dseg = (rte_v128u32_t) { -+ htonl(length), -+ txq_mp2mr(txq, txq_mb2mp(buf)), -+ naddr, -+ naddr >> 32, -+ }; -+ mpw.data.raw = (volatile void *)(dseg + 1); -+ mpw.total_len += (inl_pad + sizeof(*dseg)); -+ ++j; -+ ++mpw.pkts_n; -+ mpw_room -= (inl_pad + sizeof(*dseg)); -+ inl_pad = 0; -+ } -+ elts_head = elts_head_next; -+#ifdef MLX5_PMD_SOFT_COUNTERS -+ /* Increment sent bytes counter. */ -+ txq->stats.obytes += length; -+#endif -+ ++i; -+ } while (i < pkts_n); -+ /* Take a shortcut if nothing must be sent. */ -+ if (unlikely(i == 0)) -+ return 0; -+ /* Check whether completion threshold has been reached. */ -+ if (txq->elts_comp + j >= MLX5_TX_COMP_THRESH || -+ (uint16_t)(txq->wqe_ci - txq->mpw_comp) >= -+ (1 << txq->wqe_n) / MLX5_TX_COMP_THRESH_INLINE_DIV) { -+ volatile struct mlx5_wqe *wqe = mpw.wqe; -+ -+ /* Request completion on last WQE. */ -+ wqe->ctrl[2] = htonl(8); -+ /* Save elts_head in unused "immediate" field of WQE. */ -+ wqe->ctrl[3] = elts_head; -+ txq->elts_comp = 0; -+ txq->mpw_comp = txq->wqe_ci; -+ txq->cq_pi++; -+ } else { -+ txq->elts_comp += j; -+ } -+#ifdef MLX5_PMD_SOFT_COUNTERS -+ /* Increment sent packets counter. */ -+ txq->stats.opackets += i; -+#endif -+ if (mpw.state == MLX5_MPW_ENHANCED_STATE_OPENED) -+ mlx5_empw_close(txq, &mpw); -+ else if (mpw.state == MLX5_MPW_STATE_OPENED) -+ mlx5_mpw_close(txq, &mpw); -+ /* Ring QP doorbell. */ -+ mlx5_tx_dbrec(txq, mpw.wqe); -+ txq->elts_head = elts_head; -+ return i; -+} -+ -+/** - * Translate RX completion flags to packet type. - * - * @param[in] cqe -diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h -index 0db810c..4a4bd84 100644 ---- a/drivers/net/mlx5/mlx5_rxtx.h -+++ b/drivers/net/mlx5/mlx5_rxtx.h -@@ -248,17 +248,21 @@ struct txq { - uint16_t elts_head; /* Current index in (*elts)[]. */ - uint16_t elts_tail; /* First element awaiting completion. */ - uint16_t elts_comp; /* Counter since last completion request. */ -+ uint16_t mpw_comp; /* WQ index since last completion request. */ - uint16_t cq_ci; /* Consumer index for completion queue. */ -+ uint16_t cq_pi; /* Producer index for completion queue. */ - uint16_t wqe_ci; /* Consumer index for work queue. */ - uint16_t wqe_pi; /* Producer index for work queue. */ - uint16_t elts_n:4; /* (*elts)[] length (in log2). */ - uint16_t cqe_n:4; /* Number of CQ elements (in log2). */ - uint16_t wqe_n:4; /* Number of of WQ elements (in log2). */ -- uint16_t max_inline; /* Multiple of RTE_CACHE_LINE_SIZE to inline. */ - uint16_t inline_en:1; /* When set inline is enabled. */ - uint16_t tso_en:1; /* When set hardware TSO is enabled. */ - uint16_t tunnel_en:1; - /* When set TX offload for tunneled packets are supported. */ -+ uint16_t mpw_hdr_dseg:1; /* Enable DSEGs in the title WQEBB. */ -+ uint16_t max_inline; /* Multiple of RTE_CACHE_LINE_SIZE to inline. */ -+ uint16_t inline_max_packet_sz; /* Max packet size for inlining. */ - uint32_t qp_num_8s; /* QP number shifted by 8. */ - volatile struct mlx5_cqe (*cqes)[]; /* Completion queue. */ - volatile void *wqes; /* Work queue (use volatile to write into). */ -@@ -329,6 +333,7 @@ uint16_t mlx5_tx_burst_secondary_setup(void *, struct rte_mbuf **, uint16_t); - uint16_t mlx5_tx_burst(void *, struct rte_mbuf **, uint16_t); - uint16_t mlx5_tx_burst_mpw(void *, struct rte_mbuf **, uint16_t); - uint16_t mlx5_tx_burst_mpw_inline(void *, struct rte_mbuf **, uint16_t); -+uint16_t mlx5_tx_burst_empw(void *, struct rte_mbuf **, uint16_t); - uint16_t mlx5_rx_burst(void *, struct rte_mbuf **, uint16_t); - uint16_t removed_tx_burst(void *, struct rte_mbuf **, uint16_t); - uint16_t removed_rx_burst(void *, struct rte_mbuf **, uint16_t); -diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c -index 9d0c00f..bbfce75 100644 ---- a/drivers/net/mlx5/mlx5_txq.c -+++ b/drivers/net/mlx5/mlx5_txq.c -@@ -266,6 +266,7 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl, - struct ibv_exp_cq_attr cq_attr; - } attr; - enum ibv_exp_query_intf_status status; -+ unsigned int cqe_n; - int ret = 0; - - if (mlx5_getenv_int("MLX5_ENABLE_CQE_COMPRESSION")) { -@@ -276,6 +277,8 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl, - (void)conf; /* Thresholds configuration (ignored). */ - assert(desc > MLX5_TX_COMP_THRESH); - tmpl.txq.elts_n = log2above(desc); -+ if (priv->mps == MLX5_MPW_ENHANCED) -+ tmpl.txq.mpw_hdr_dseg = priv->mpw_hdr_dseg; - /* MRs will be registered in mp2mr[] later. */ - attr.rd = (struct ibv_exp_res_domain_init_attr){ - .comp_mask = (IBV_EXP_RES_DOMAIN_THREAD_MODEL | -@@ -294,9 +297,12 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl, - .comp_mask = IBV_EXP_CQ_INIT_ATTR_RES_DOMAIN, - .res_domain = tmpl.rd, - }; -+ cqe_n = ((desc / MLX5_TX_COMP_THRESH) - 1) ? -+ ((desc / MLX5_TX_COMP_THRESH) - 1) : 1; -+ if (priv->mps == MLX5_MPW_ENHANCED) -+ cqe_n += MLX5_TX_COMP_THRESH_INLINE_DIV; - tmpl.cq = ibv_exp_create_cq(priv->ctx, -- (((desc / MLX5_TX_COMP_THRESH) - 1) ? -- ((desc / MLX5_TX_COMP_THRESH) - 1) : 1), -+ cqe_n, - NULL, NULL, 0, &attr.cq); - if (tmpl.cq == NULL) { - ret = ENOMEM; -@@ -340,9 +346,24 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl, - tmpl.txq.max_inline = - ((priv->txq_inline + (RTE_CACHE_LINE_SIZE - 1)) / - RTE_CACHE_LINE_SIZE); -- attr.init.cap.max_inline_data = -- tmpl.txq.max_inline * RTE_CACHE_LINE_SIZE; - tmpl.txq.inline_en = 1; -+ /* TSO and MPS can't be enabled concurrently. */ -+ assert(!priv->tso || !priv->mps); -+ if (priv->mps == MLX5_MPW_ENHANCED) { -+ tmpl.txq.inline_max_packet_sz = -+ priv->inline_max_packet_sz; -+ /* To minimize the size of data set, avoid requesting -+ * too large WQ. -+ */ -+ attr.init.cap.max_inline_data = -+ ((RTE_MIN(priv->txq_inline, -+ priv->inline_max_packet_sz) + -+ (RTE_CACHE_LINE_SIZE - 1)) / -+ RTE_CACHE_LINE_SIZE) * RTE_CACHE_LINE_SIZE; -+ } else { -+ attr.init.cap.max_inline_data = -+ tmpl.txq.max_inline * RTE_CACHE_LINE_SIZE; -+ } - } - if (priv->tso) { - uint16_t max_tso_inline = ((MLX5_MAX_TSO_HEADER + --- -2.7.4 - -- cgit 1.2.3-korg