From 2b202bc4b2d870d76bfe6fb1906ae62e253cec72 Mon Sep 17 00:00:00 2001 From: Neale Ranns Date: Mon, 21 Sep 2020 08:17:51 +0000 Subject: lisp: Move to plugin Type: refactor Change-Id: I54df533a8f863c4e49742903cf2457f18b4fc506 Signed-off-by: Neale Ranns --- src/plugins/lisp/lisp-gpe/lisp_gpe_packet.h | 149 ++++++++++++++++++++++++++++ 1 file changed, 149 insertions(+) create mode 100644 src/plugins/lisp/lisp-gpe/lisp_gpe_packet.h (limited to 'src/plugins/lisp/lisp-gpe/lisp_gpe_packet.h') diff --git a/src/plugins/lisp/lisp-gpe/lisp_gpe_packet.h b/src/plugins/lisp/lisp-gpe/lisp_gpe_packet.h new file mode 100644 index 00000000000..62ac9bd7015 --- /dev/null +++ b/src/plugins/lisp/lisp-gpe/lisp_gpe_packet.h @@ -0,0 +1,149 @@ +/* + * Copyright (c) 2016 Cisco and/or its affiliates. + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +/** + * @file + * @brief LISP-GPE packet header structure + * + */ + +#ifndef included_lisp_gpe_packet_h +#define included_lisp_gpe_packet_h + +/* + * From draft-lewis-lisp-gpe-02.txt + * + * 0 1 2 3 + * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * |N|L|E|V|I|P|R|O|Ver| Reserved | Next Protocol | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * | Instance ID/Locator-Status-Bits | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * N: The N-bit is the nonce-present bit. When this bit is set to 1, + * the low-order 24 bits of the first 32 bits of the LISP header + * contain a Nonce. See Section 6.3.1 for details. Both N- and + * V-bits MUST NOT be set in the same packet. If they are, a + * decapsulating ETR MUST treat the 'Nonce/Map-Version' field as + * having a Nonce value present. + * + * L: The L-bit is the 'Locator-Status-Bits' field enabled bit. When + * this bit is set to 1, the Locator-Status-Bits in the second + * 32 bits of the LISP header are in use. + * + * E: The E-bit is the echo-nonce-request bit. This bit MUST be ignored + * and has no meaning when the N-bit is set to 0. When the N-bit is + * set to 1 and this bit is set to 1, an ITR is requesting that the + * nonce value in the 'Nonce' field be echoed back in LISP- + * encapsulated packets when the ITR is also an ETR. See + * Section 6.3.1 for details. + * + * V: The V-bit is the Map-Version present bit. When this bit is set to + * 1, the N-bit MUST be 0. Refer to Section 6.6.3 for more details. + * + * I: The I-bit is the Instance ID bit. See Section 5.5 for more + * details. When this bit is set to 1, the 'Locator-Status-Bits' + * field is reduced to 8 bits and the high-order 24 bits are used as + * an Instance ID. If the L-bit is set to 0, then the low-order + * 8 bits are transmitted as zero and ignored on receipt. + * + * P Bit: Flag bit 5 is defined as the Next Protocol bit. The P bit + * MUST be set to 1 to indicate the presence of the 8 bit next + * protocol field. + * + * P = 0 indicates that the payload MUST conform to LISP as defined + * in [RFC6830]. + * + * Flag bit 5 was chosen as the P bit because this flag bit is + * currently unallocated in LISP [RFC6830]. + * + * O: Flag bit 7 is defined as the O bit. When the O bit is set to 1, the + * packet is an OAM packet and OAM processing MUST occur. The OAM + * protocol details are out of scope for this document. As with the + * P-bit, bit 7 is currently a reserved flag in [RFC6830]. + * + * Next Protocol Field: The lower 8 bits of the first word are used to + * carry a next protocol. This next protocol field contains the + * protocol of the encapsulated payload packet. + * + * LISP [RFC6830] uses the lower 16 bits of the first word for either + * a nonce, an echo-nonce ([RFC6830]) or to support map-versioning + * ([RFC6834]). These are all optional capabilities that are + * indicated by setting the N, E, and the V bit respectively. + * + * To maintain the desired data plane compatibility, when the P bit + * is set, the N, E, and V bits MUST be set to zero. + * + * A new protocol registry will be requested from IANA for the Next + * Protocol field. This draft defines the following Next Protocol + * values: + * + * 0x1 : IPv4 + * 0x2 : IPv6 + * 0x3 : Ethernet + * 0x4: Network Service Header + */ + +/** LISP-GPE header */ +typedef struct +{ + u8 flags; + u8 ver_res; + u8 res; + u8 next_protocol; + u32 iid; +} lisp_gpe_header_t; + +#define foreach_lisp_gpe_flag_bit \ +_(N, 0x80) \ +_(L, 0x40) \ +_(E, 0x20) \ +_(V, 0x10) \ +_(I, 0x08) \ +_(P, 0x04) \ +_(O, 0x01) + +typedef enum +{ +#define _(n,v) LISP_GPE_FLAGS_##n = v, + foreach_lisp_gpe_flag_bit +#undef _ +} vnet_lisp_gpe_flag_bit_t; + +#define LISP_GPE_VERSION 0x0 + +#define LISP_GPE_NEXT_PROTOCOL_IP4 0x1 +#define LISP_GPE_NEXT_PROTOCOL_IP6 0x2 +#define LISP_GPE_NEXT_PROTOCOL_ETHERNET 0x3 +#define LISP_GPE_NEXT_PROTOCOL_NSH 0x4 + +typedef enum +{ + LISP_GPE_NEXT_PROTO_IP4 = 1, + LISP_GPE_NEXT_PROTO_IP6, + LISP_GPE_NEXT_PROTO_ETHERNET, + LISP_GPE_NEXT_PROTO_NSH, + LISP_GPE_NEXT_PROTOS +} lisp_gpe_next_protocol_e; + +#endif /* included_lisp_gpe_packet_h */ + +/* + * fd.io coding-style-patch-verification: ON + * + * Local Variables: + * eval: (c-set-style "gnu") + * End: + */ -- cgit 1.2.3-korg