From 2ba92e32e0197f676dd905e5edcb4ff3e1bec241 Mon Sep 17 00:00:00 2001
From: Matus Fabian <matfabia@cisco.com>
Date: Mon, 21 Aug 2017 07:05:03 -0700
Subject: NAT: Rename snat plugin to nat (VPP-955)

Change-Id: I30a7e3da7a4efc6038a91e27b48045d4b07e2764
Signed-off-by: Matus Fabian <matfabia@cisco.com>
---
 src/plugins/snat/snat.api | 897 ----------------------------------------------
 1 file changed, 897 deletions(-)
 delete mode 100644 src/plugins/snat/snat.api

(limited to 'src/plugins/snat/snat.api')

diff --git a/src/plugins/snat/snat.api b/src/plugins/snat/snat.api
deleted file mode 100644
index 3c493ddae5b..00000000000
--- a/src/plugins/snat/snat.api
+++ /dev/null
@@ -1,897 +0,0 @@
-/*
- * Copyright (c) 2016 Cisco and/or its affiliates.
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-/**
- * @file snat.api
- * @brief VPP control-plane API messages.
- *
- * This file defines VPP control-plane API messages which are generally
- * called through a shared memory interface.
- */
-
-/** \brief Add/del S-NAT address range
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param is_ip4 - 1 if address type is IPv4
-    @param first_ip_address - first IP address
-    @param last_ip_address - last IP address
-    @param vrf_id - VRF id of tenant, ~0 means independent of VRF
-    @param is_add - 1 if add, 0 if delete
-*/
-autoreply define snat_add_address_range {
-  u32 client_index;
-  u32 context;
-  u8 is_ip4;
-  u8 first_ip_address[16];
-  u8 last_ip_address[16];
-  u32 vrf_id;
-  u8 is_add;
-};
-
-/** \brief Dump S-NAT addresses
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define snat_address_dump {
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief S-NAT address details response
-    @param context - sender context, to match reply w/ request
-    @param is_ip4 - 1 if address type is IPv4
-    @param ip_address - IP address
-    @param vrf_id - VRF id of tenant, ~0 means independent of VRF
-*/
-define snat_address_details {
-  u32 context;
-  u8 is_ip4;
-  u8 ip_address[16];
-  u32 vrf_id;
-};
-
-/** \brief Enable/disable S-NAT feature on the interface
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param is_add - 1 if add, 0 if delete
-    @param is_inside - 1 if inside, 0 if outside
-    @param sw_if_index - software index of the interface
-*/
-autoreply define snat_interface_add_del_feature {
-  u32 client_index;
-  u32 context;
-  u8 is_add;
-  u8 is_inside;
-  u32 sw_if_index;
-};
-
-/** \brief Dump interfaces with S-NAT feature
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define snat_interface_dump {
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief S-NAT interface details response
-    @param context - sender context, to match reply w/ request
-    @param is_inside - 1 if inside, 0 if outside
-    @param sw_if_index - software index of the interface
-*/
-define snat_interface_details {
-  u32 context;
-  u8 is_inside;
-  u32 sw_if_index;
-};
-
-/** \brief Enable/disbale S-NAT as an interface output feature (postrouting
-           in2out translation)
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param is_add - 1 if add, 0 if delete
-    @param is_inside - 1 if inside, 0 if outside
-    @param sw_if_index - software index of the interface
-*/
-autoreply define snat_interface_add_del_output_feature {
-  u32 client_index;
-  u32 context;
-  u8 is_add;
-  u8 is_inside;
-  u32 sw_if_index;
-};
-
-/** \brief Dump interfaces with S-NAT output feature
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define snat_interface_output_feature_dump {
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief S-NAT interface with output feature details response
-    @param context - sender context, to match reply w/ request
-    @param is_inside - 1 if inside, 0 if outside
-    @param sw_if_index - software index of the interface
-*/
-define snat_interface_output_feature_details {
-  u32 context;
-  u8 is_inside;
-  u32 sw_if_index;
-};
-
-/** \brief Add/delete S-NAT static mapping
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param is_add - 1 if add, 0 if delete
-    @param is_ip4 - 1 if address type is IPv4
-    @param addr_only - 1 if address only mapping
-    @param local_ip_address - local IP address
-    @param external_ip_address - external IP address
-    @param protocol - IP protocol
-    @param local_port - local port number
-    @param external_port - external port number
-    @param external_sw_if_index - external interface (if set
-                                  external_ip_address is ignored, ~0 means not
-                                  used)
-    @param vfr_id - VRF ID
-*/
-autoreply define snat_add_static_mapping {
-  u32 client_index;
-  u32 context;
-  u8 is_add;
-  u8 is_ip4;
-  u8 addr_only;
-  u8 local_ip_address[16];
-  u8 external_ip_address[16];
-  u8 protocol;
-  u16 local_port;
-  u16 external_port;
-  u32 external_sw_if_index;
-  u32 vrf_id;
-};
-
-/** \brief Dump S-NAT static mappings
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define snat_static_mapping_dump {
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief S-NAT static mapping details response
-    @param context - sender context, to match reply w/ request
-    @param is_ip4 - 1 if address type is IPv4
-    @param addr_only - 1 if address only mapping
-    @param local_ip_address - local IP address
-    @param external_ip_address - external IP address
-    @param protocol - IP protocol
-    @param local_port - local port number
-    @param external_port - external port number
-    @param external_sw_if_index - external interface
-    @param vfr_id - VRF ID
-*/
-define snat_static_mapping_details {
-  u32 context;
-  u8 is_ip4;
-  u8 addr_only;
-  u8 local_ip_address[16];
-  u8 external_ip_address[16];
-  u8 protocol;
-  u16 local_port;
-  u16 external_port;
-  u32 external_sw_if_index;
-  u32 vrf_id;
-};
-
-/** \brief Control ping from client to api server request
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define snat_control_ping
-{
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief Control ping from the client to the server response
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param retval - return code for the request
-    @param vpe_pid - the pid of the vpe, returned by the server
-*/
-define snat_control_ping_reply
-{
-  u32 context;
-  i32 retval;
-  u32 client_index;
-  u32 vpe_pid;
-};
-
-/** \brief Show S-NAT plugin startup config
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define snat_show_config
-{
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief Show S-NAT plugin startup config reply
-    @param context - sender context, to match reply w/ request
-    @param retval - return code for the request
-    @param static_mapping_only - if 1 dynamic translations disabled
-    @param static_mapping_connection_tracking - if 1 create session data
-    @param deterministic - if 1 deterministic mapping
-    @param translation_buckets - number of translation hash buckets
-    @param translation_memory_size - translation hash memory size
-    @param user_buckets - number of user hash buckets
-    @param user_memory_size - user hash memory size
-    @param max_translations_per_user - maximum number of translations per user
-    @param outside_vrf_id - outside VRF id
-    @param inside_vrf_id - default inside VRF id
-*/
-define snat_show_config_reply
-{
-  u32 context;
-  i32 retval;
-  u8 static_mapping_only;
-  u8 static_mapping_connection_tracking;
-  u8 deterministic;
-  u32 translation_buckets;
-  u32 translation_memory_size;
-  u32 user_buckets;
-  u32 user_memory_size;
-  u32 max_translations_per_user;
-  u32 outside_vrf_id;
-  u32 inside_vrf_id;
-};
-
-/** \brief Set S-NAT workers
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param worker_mask - S-NAT workers mask
-*/
-autoreply define snat_set_workers {
-  u32 client_index;
-  u32 context;
-  u64 worker_mask;
-};
-
-/** \brief Dump S-NAT workers
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define snat_worker_dump {
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief S-NAT workers details response
-    @param context - sender context, to match reply w/ request
-    @param worker_index - worker index
-    @param lcore_id - lcore ID
-    @param name - worker name
-*/
-define snat_worker_details {
-  u32 context;
-  u32 worker_index;
-  u32 lcore_id;
-  u8 name[64];
-};
-
-/** \brief Add/delete S-NAT pool address from specific interfce
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param is_add - 1 if add, 0 if delete
-    @param sw_if_index - software index of the interface
-*/
-autoreply define snat_add_del_interface_addr {
-  u32 client_index;
-  u32 context;
-  u8 is_add;
-  u8 is_inside;
-  u32 sw_if_index;
-};
-
-/** \brief Dump S-NAT pool addresses interfaces
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define snat_interface_addr_dump {
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief S-NAT pool addresses interfaces details response
-    @param context - sender context, to match reply w/ request
-    @param sw_if_index - software index of the interface
-*/
-define snat_interface_addr_details {
-  u32 context;
-  u32 sw_if_index;
-};
-
-/** \brief Enable/disable S-NAT IPFIX logging
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param domain_id - observation domain ID
-    @param src_port - source port number
-    @param enable - 1 if enable, 0 if disable
-*/
-autoreply define snat_ipfix_enable_disable {
-  u32 client_index;
-  u32 context;
-  u32 domain_id;
-  u16 src_port;
-  u8 enable;
-};
-
-/** \brief Dump S-NAT users
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define snat_user_dump {
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief S-NAT users response
-    @param context - sender context, to match reply w/ request
-    @vrf_id - VRF ID
-    @param is_ip4 - 1 if address type is IPv4
-    @param ip_adress - IP address
-    @param nsessions - number of dynamic sessions
-    @param nstaticsessions - number of static sessions
-*/
-define snat_user_details {
-  u32 context;
-  u32 vrf_id;
-  u8 is_ip4;
-  u8 ip_address[16];
-  u32 nsessions;
-  u32 nstaticsessions;
-};
-
-/** \brief S-NAT user's sessions
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param is_ip4 - 1 if address type is IPv4
-    @param user_ip - IP address of the user to dump
-    @param vrf_id - VRF_ID
-*/
-define snat_user_session_dump {
-  u32 client_index;
-  u32 context;
-  u8 is_ip4;
-  u8 ip_address[16];
-  u32 vrf_id;
-};
-
-/** \brief S-NAT user's sessions response
-    @param context - sender context, to match reply w/ request
-    @param is_ip4 - 1 if address type is IPv4
-    @param outside_ip_address - outside IP address
-    @param outside_port - outside port
-    @param inside_ip_address - inside IP address
-    @param inside_port - inside port
-    @param protocol - protocol
-    @param is_static - 1 if session is static
-    @param last_heard - last heard timer
-    @param total_bytes - count of bytes sent through session
-    @param total_pkts - count of pakets sent through session
-*/
-define snat_user_session_details {
-  u32 context;
-  u8 is_ip4;
-  u8 outside_ip_address[16];
-  u16 outside_port;
-  u8 inside_ip_address[16];
-  u16 inside_port;
-  u16 protocol;
-  u8 is_static;
-  u64 last_heard;
-  u64 total_bytes;
-  u32 total_pkts;
-};
-
-/** \brief Add/delete S-NAT deterministic mapping
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param is_add - 1 if add, 0 if delete
-    @param is_ip4 - 1 if address type is IPv4
-    @param in_addr - inside IP address
-    @param in_plen - inside IP address prefix length
-    @param out_addr - outside IP address
-    @param out_addr - outside IP address prefix length
-*/
-autoreply define snat_add_det_map {
-  u32 client_index;
-  u32 context;
-  u8 is_add;
-  u8 is_ip4;
-  u8 addr_only;
-  u8 in_addr[16];
-  u8 in_plen;
-  u8 out_addr[16];
-  u8 out_plen;
-};
-
-/** \brief Get outside address and port range from inside address
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param is_ip4 - 1 if address type is IPv4
-    @param in_addr - inside IP address
-*/
-define snat_det_forward {
-  u32 client_index;
-  u32 context;
-  u8 is_ip4;
-  u8 in_addr[16];
-};
-
-/** \brief Get outside address and port range from inside address
-    @param context - sender context, to match reply w/ request
-    @param retval - return code
-    @param out_port_lo - outside port range start
-    @param out_port_hi - outside port range end
-    @param is_ip4 - 1 if address type is IPv4
-    @param out_addr - outside IP address
-*/
-define snat_det_forward_reply {
-  u32 context;
-  i32 retval;
-  u16 out_port_lo;
-  u16 out_port_hi;
-  u8 is_ip4;
-  u8 out_addr[16];
-};
-
-/** \brief Get inside address from outside address and port
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param out_port - outside port
-    @param is_ip4 - 1 if address type is IPv4
-    @param out_addr - outside IP address
-*/
-define snat_det_reverse {
-  u32 client_index;
-  u32 context;
-  u16 out_port;
-  u8 is_ip4;
-  u8 out_addr[16];
-};
-
-/** \brief Get inside address from outside address and port reply
-    @param context - sender context, to match reply w/ request
-    @param retval - return code
-    @param is_ip4 - 1 if address type is IPv4
-    @param in_addr - inside IP address
-*/
-define snat_det_reverse_reply {
-  u32 context;
-  i32 retval;
-  u8 is_ip4;
-  u8 in_addr[16];
-};
-
-/** \brief Dump S-NAT deterministic mappings
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define snat_det_map_dump {
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief S-NAT users response
-    @param context - sender context, to match reply w/ request
-    @param is_ip4 - 1 if address type is IPv4
-    @param in_addr - inside IP address
-    @param in_plen - inside IP address prefix length
-    @param out_addr - outside IP address
-    @param out_plen - outside IP address prefix length
-    @param sharing_ratio - outside to inside address sharing ratio
-    @param ports_per_host - number of ports available to a host
-    @param ses_num - number of sessions belonging to this mapping
-*/
-define snat_det_map_details {
-  u32 context;
-  u8 is_ip4;
-  u8 in_addr[16];
-  u8 in_plen;
-  u8 out_addr[16];
-  u8 out_plen;
-  u32 sharing_ratio;
-  u16 ports_per_host;
-  u32 ses_num;
-};
-
-/** \brief Set values of timeouts for deterministic NAT (seconds, 0 = default)
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param udp - UDP timeout (default 300sec)
-    @param tcp_established - TCP established timeout (default 7440sec)
-    @param tcp_transitory - TCP transitory timeout (default 240sec)
-    @param icmp - ICMP timeout (default 60sec)
-*/
-autoreply define snat_det_set_timeouts {
-  u32 client_index;
-  u32 context;
-  u32 udp;
-  u32 tcp_established;
-  u32 tcp_transitory;
-  u32 icmp;
-};
-
-/** \brief Get values of timeouts for deterministic NAT (seconds)
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define snat_det_get_timeouts {
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief Get values of timeouts for deterministic NAT reply
-    @param context - sender context, to match reply w/ request
-    @param retval - return code
-    @param udp - UDP timeout (default 300sec)
-    @param tcp_established - TCP established timeout (default 7440sec)
-    @param tcp_transitory - TCP transitory timeout (default 240sec)
-    @param icmp - ICMP timeout (default 60sec)
-*/
-define snat_det_get_timeouts_reply {
-  u32 context;
-  i32 retval;
-  u32 udp;
-  u32 tcp_established;
-  u32 tcp_transitory;
-  u32 icmp;
-};
-
-/** \brief Close CGNAT session by outside address and port
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param is_ip4 - 1 if address type is IPv4
-    @param out_addr - outside IP address
-    @param out_port - outside port
-    @param ext_addr - external host address
-    @param ext_port - external host port
-*/
-autoreply define snat_det_close_session_out {
-  u32 client_index;
-  u32 context;
-  u8 is_ip4;
-  u8 out_addr[16];
-  u16 out_port;
-  u8 ext_addr[16];
-  u16 ext_port;
-};
-
-/** \brief Close CGNAT session by inside address and port
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param is_ip4 - 1 if address type is IPv4
-    @param in_addr - inside IP address
-    @param in_port - inside port
-    @param ext_addr - external host address
-    @param ext_port - external host port
-*/
-autoreply define snat_det_close_session_in {
-  u32 client_index;
-  u32 context;
-  u8 is_ip4;
-  u8 in_addr[16];
-  u16 in_port;
-  u8 ext_addr[16];
-  u16 ext_port;
-};
-
-/** \brief Dump S-NAT deterministic sessions
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param is_ip4 - 1 if address type is IPv4
-    @param user_addr - address of an inside user whose sessions to dump
-*/
-define snat_det_session_dump {
-  u32 client_index;
-  u32 context;
-  u8 is_ip4;
-  u8 user_addr[16];
-};
-
-/** \brief S-NAT deterministic sessions reply
-    @param context - sender context, to match reply w/ request
-    @param is_ip4 - 1 if address type is IPv4
-    @param in_port - inside port
-    @param ext_addr - external host address
-    @param ext_port - external host port
-    @param out_port - outside NAT port
-    @param state - session state
-    @param expire - session expiration timestamp
-*/
-define snat_det_session_details {
-  u32 client_index;
-  u32 context;
-  u8 is_ip4;
-  u16 in_port;
-  u8 ext_addr[16];
-  u16 ext_port;
-  u16 out_port;
-  u8 state;
-  u32 expire;
-};
-
-/** \brief Add/delete address range to NAT64 pool
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param start_addr - start address of the range
-    @param end_addr - end address of the range
-    @param vrf_id - VRF id of tenant, ~0 means independent of VRF
-    @param is_add - 1 if add, 0 if delete
-*/
-autoreply define nat64_add_del_pool_addr_range {
-  u32 client_index;
-  u32 context;
-  u8 start_addr[4];
-  u8 end_addr[4];
-  u32 vrf_id;
-  u8 is_add;
-};
-
-/** \brief Dump NAT64 pool addresses
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define nat64_pool_addr_dump {
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief NAT64 pool address details response
-    @param context - sender context, to match reply w/ request
-    @param address - IPv4 address
-    @param vfr_id - VRF id of tenant, ~0 means independent of VRF
-*/
-define nat64_pool_addr_details {
-  u32 context;
-  u8 address[4];
-  u32 vrf_id;
-};
-
-/** \brief Enable/disable NAT64 feature on the interface
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param sw_if_index - index of the interface
-    @param is_inside - 1 if inside, 0 if outside
-    @param is_add - 1 if add, 0 if delete
-*/
-autoreply define nat64_add_del_interface {
-  u32 client_index;
-  u32 context;
-  u32 sw_if_index;
-  u8 is_inside;
-  u8 is_add;
-};
-
-/** \brief Dump interfaces with NAT64 feature
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define nat64_interface_dump {
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief NAT64 interface details response
-    @param context - sender context, to match reply w/ request
-    @param is_inside - 1 if inside, 0 if outside
-    @param sw_if_index - index of the interface
-*/
-define nat64_interface_details {
-  u32 context;
-  u8 is_inside;
-  u32 sw_if_index;
-};
-
-/** \brief Add/delete NAT64 static BIB entry
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param i_addr - inside IPv6 address
-    @param o_addr - outside IPv4 address
-    @param i_port - inside port number
-    @param o_port - outside port number
-    @param vrf_id - VRF id of tenant
-    @param proto - protocol number
-    @param is_add - 1 if add, 0 if delete
-*/
- autoreply define nat64_add_del_static_bib {
-  u32 client_index;
-  u32 context;
-  u8 i_addr[16];
-  u8 o_addr[4];
-  u16 i_port;
-  u16 o_port;
-  u32 vrf_id;
-  u8 proto;
-  u8 is_add;
-};
-
-/** \brief Dump NAT64 BIB
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param proto - protocol of the BIB: 255 - all BIBs
-                                        6 - TCP BIB
-                                        17 - UDP BIB
-                                        1/58 - ICMP BIB
-                                        otherwise - "unknown" protocol BIB
-*/
-define nat64_bib_dump {
-  u32 client_index;
-  u32 context;
-  u8 proto;
-};
-
-/** \brief NAT64 BIB details response
-    @param context - sender context, to match reply w/ request
-    @param i_addr - inside IPv6 address
-    @param o_addr - outside IPv4 address
-    @param i_port - inside port number
-    @param o_port - outside port number
-    @param vrf_id - VRF id of tenant
-    @param proto - protocol number
-    @param is_static - 1 if static BIB entry, 0 if dynamic
-    @param ses_num - number of sessions associated with the BIB entry
-*/
-define nat64_bib_details {
-  u32 context;
-  u8 i_addr[16];
-  u8 o_addr[4];
-  u16 i_port;
-  u16 o_port;
-  u32 vrf_id;
-  u8 proto;
-  u8 is_static;
-  u32 ses_num;
-};
-
-/** \brief Set values of timeouts for NAT64 (seconds, 0 = default)
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param udp - UDP timeout (default 300sec)
-    @param icmp - ICMP timeout (default 60sec)
-    @param tcp_trans - TCP transitory timeout (default 240sec)
-    @param tcp_est - TCP established timeout (default 7440sec)
-    @param tcp_incoming_syn - TCP incoming SYN timeout (default 6sec)
-*/
-autoreply define nat64_set_timeouts {
-  u32 client_index;
-  u32 context;
-  u32 udp;
-  u32 icmp;
-  u32 tcp_trans;
-  u32 tcp_est;
-  u32 tcp_incoming_syn;
-};
-
-/** \brief Get values of timeouts for NAT64 (seconds)
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define nat64_get_timeouts {
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief Get values of timeouts for NAT64 reply
-    @param context - sender context, to match reply w/ request
-    @param retval - return code
-    @param udp - UDP timeout
-    @param icmp - ICMP timeout
-    @param tcp_trans - TCP transitory timeout
-    @param tcp_est - TCP established timeout
-    @param tcp_incoming_syn - TCP incoming SYN timeout
-*/
-define nat64_get_timeouts_reply {
-  u32 context;
-  i32 retval;
-  u32 udp;
-  u32 icmp;
-  u32 tcp_trans;
-  u32 tcp_est;
-  u32 tcp_incoming_syn;
-};
-
-/** \brief Dump NAT64 session table
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param proto - protocol of the session table: 255 - all STs
-                                                  6 - TCP ST
-                                                  17 - UDP ST
-                                                  1/58 - ICMP ST
-                                                  otherwise - "unknown" proto ST
-*/
-define nat64_st_dump {
-  u32 client_index;
-  u32 context;
-  u8 proto;
-};
-
-/** \brief NAT64 session table details response
-    @param context - sender context, to match reply w/ request
-    @param il_addr - inside IPv6 address of the local host
-    @param ol_addr - outside IPv4 address of the local host
-    @param il_port - inside port number id of the local host/inside ICMP id
-    @param ol_port - outside port number of the local host/outside ICMP id
-    @param il_addr - inside IPv6 address of the remote host
-    @param ol_addr - outside IPv4 address of the remote host
-    @param l_port - port number of the remote host (not used for ICMP)
-    @param vrf_id - VRF id of tenant
-    @param proto - protocol number
-*/
-define nat64_st_details {
-  u32 context;
-  u8 il_addr[16];
-  u8 ol_addr[4];
-  u16 il_port;
-  u16 ol_port;
-  u8 ir_addr[16];
-  u8 or_addr[4];
-  u16 r_port;
-  u32 vrf_id;
-  u8 proto;
-};
-
-/** \brief Add/del NAT64 prefix
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-    @param prefix - NAT64 prefix
-    @param prefix - NAT64 prefix length
-    @param vrf_id - VRF id of tenant
-    @param is_add - 1 if add, 0 if delete
-*/
-autoreply define nat64_add_del_prefix {
-  u32 client_index;
-  u32 context;
-  u8 prefix[16];
-  u8 prefix_len;
-  u32 vrf_id;
-  u8 is_add;
-};
-
-/** \brief Dump NAT64 prefix
-    @param client_index - opaque cookie to identify the sender
-    @param context - sender context, to match reply w/ request
-*/
-define nat64_prefix_dump {
-  u32 client_index;
-  u32 context;
-};
-
-/** \brief Dump NAT64 prefix details response
-    @param context - sender context, to match reply w/ request
-    @param prefix - NAT64 prefix
-    @param prefix - NAT64 prefix length
-    @param vrf_id - VRF id of tenant
-*/
-define nat64_prefix_details {
-  u32 context;
-  u8 prefix[16];
-  u8 prefix_len;
-  u32 vrf_id;
-};
-- 
cgit 1.2.3-korg