From 7cd468a3d7dee7d6c92f69a0bb7061ae208ec727 Mon Sep 17 00:00:00 2001 From: Damjan Marion Date: Mon, 19 Dec 2016 23:05:39 +0100 Subject: Reorganize source tree to use single autotools instance Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion --- src/vnet/dpo/dpo.h | 381 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 381 insertions(+) create mode 100644 src/vnet/dpo/dpo.h (limited to 'src/vnet/dpo/dpo.h') diff --git a/src/vnet/dpo/dpo.h b/src/vnet/dpo/dpo.h new file mode 100644 index 00000000000..1efcbc8834b --- /dev/null +++ b/src/vnet/dpo/dpo.h @@ -0,0 +1,381 @@ +/* + * Copyright (c) 2016 Cisco and/or its affiliates. + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +/** + * @brief + * A Data-Path Object is an object that represents actions that are + * applied to packets are they are switched through VPP's data-path. + * + * The DPO can be considered to be like is a base class that is specialised + * by other objects to provide concreate actions + * + * The VLIB graph nodes are graph of DPO types, the DPO graph is a graph of + * instances. + */ + +#ifndef __DPO_H__ +#define __DPO_H__ + +#include + +/** + * @brief An index for adjacencies. + * Alas 'C' is not typesafe enough to b0rk when a u32 is used instead of + * an index_t. However, for us humans, we can glean much more intent + * from the declaration + * foo barindex_t t); + * than we can from + * foo bar(u32 t); + */ +typedef u32 index_t; + +/** + * @brief Invalid index - used when no index is known + * blazoned capitals INVALID speak volumes where ~0 does not. + */ +#define INDEX_INVALID ((index_t)(~0)) + +/** + * @brief Data path protocol. + * Actions performed on packets in the data-plane can be described and represented + * by protocol independent objects, i.e. ADJACENCY, but the spceifics actions + * required during ADJACENCY processing can be protocol dependent. For example, + * the adjacency rewrite node performs a ip4 checksum calculation, ip6 and MPLS + * do not, all 3 perform a TTL decrement. The VLIB graph nodes are thus protocol + * dependent, and thus each graph edge/arc is too. + * When programming a DPO's next node arc from child to parent it is thus required + * to know the parent's data-path protocol so the correct arc index can be used. + */ +typedef enum dpo_proto_t_ +{ +#if CLIB_DEBUG > 0 + DPO_PROTO_IP4 = 1, +#else + DPO_PROTO_IP4 = 0, +#endif + DPO_PROTO_IP6, + DPO_PROTO_ETHERNET, + DPO_PROTO_MPLS, +} __attribute__((packed)) dpo_proto_t; + +#define DPO_PROTO_NUM ((dpo_proto_t)(DPO_PROTO_MPLS+1)) +#define DPO_PROTO_NONE ((dpo_proto_t)(DPO_PROTO_NUM+1)) + +#define DPO_PROTOS { \ + [DPO_PROTO_IP4] = "ip4", \ + [DPO_PROTO_IP6] = "ip6", \ + [DPO_PROTO_ETHERNET] = "ethernet", \ + [DPO_PROTO_MPLS] = "mpls", \ +} + +#define FOR_EACH_DPO_PROTO(_proto) \ + for (_proto = DPO_PROTO_IP4; \ + _proto <= DPO_PROTO_MPLS; \ + _proto++) + +/** + * @brief Common types of data-path objects + * New types can be dynamically added using dpo_register_new_type() + */ +typedef enum dpo_type_t_ { + /** + * A non-zero value first so we can spot unitialisation errors + */ + DPO_FIRST, + DPO_DROP, + DPO_IP_NULL, + DPO_PUNT, + /** + * @brief load-balancing over a choice of [un]equal cost paths + */ + DPO_LOAD_BALANCE, + DPO_ADJACENCY, + DPO_ADJACENCY_INCOMPLETE, + DPO_ADJACENCY_MIDCHAIN, + DPO_ADJACENCY_GLEAN, + DPO_RECEIVE, + DPO_LOOKUP, + DPO_LISP_CP, + DPO_CLASSIFY, + DPO_MPLS_LABEL, + DPO_LAST, +} __attribute__((packed)) dpo_type_t; + +#define DPO_TYPE_NUM DPO_LAST + +#define DPO_TYPES { \ + [DPO_FIRST] = "dpo-invalid", \ + [DPO_DROP] = "dpo-drop", \ + [DPO_IP_NULL] = "dpo-ip-null", \ + [DPO_PUNT] = "dpo-punt", \ + [DPO_ADJACENCY] = "dpo-adjacency", \ + [DPO_ADJACENCY_INCOMPLETE] = "dpo-adjacency-incomplete", \ + [DPO_ADJACENCY_MIDCHAIN] = "dpo-adjacency-midcahin", \ + [DPO_ADJACENCY_GLEAN] = "dpo-glean", \ + [DPO_RECEIVE] = "dpo-receive", \ + [DPO_LOOKUP] = "dpo-lookup", \ + [DPO_LOAD_BALANCE] = "dpo-load-balance", \ + [DPO_LISP_CP] = "dpo-lisp-cp", \ + [DPO_CLASSIFY] = "dpo-classify", \ + [DPO_MPLS_LABEL] = "dpo-mpls-label" \ +} + +/** + * @brief The identity of a DPO is a combination of its type and its + * instance number/index of objects of that type + */ +typedef struct dpo_id_t_ { + /** + * the type + */ + dpo_type_t dpoi_type; + /** + * the data-path protocol of the type. + */ + dpo_proto_t dpoi_proto; + /** + * The next VLIB node to follow. + */ + u16 dpoi_next_node; + /** + * the index of objects of that type + */ + index_t dpoi_index; +} __attribute__ ((aligned(sizeof(u64)))) dpo_id_t; + +STATIC_ASSERT(sizeof(dpo_id_t) <= sizeof(u64), + "DPO ID is greater than sizeof u64 " + "atomic updates need to be revisited"); + +/** + * @brief An initialiser for DPOs declared on the stack. + * Thenext node is set to 0 since VLIB graph nodes should set 0 index to drop. + */ +#define DPO_INVALID \ +{ \ + .dpoi_type = DPO_FIRST, \ + .dpoi_proto = DPO_PROTO_NONE, \ + .dpoi_index = INDEX_INVALID, \ + .dpoi_next_node = 0, \ +} + +/** + * @brief Return true if the DPO object is valid, i.e. has been initialised. + */ +static inline int +dpo_id_is_valid (const dpo_id_t *dpoi) +{ + return (dpoi->dpoi_type != DPO_FIRST && + dpoi->dpoi_index != INDEX_INVALID); +} + +extern dpo_proto_t vnet_link_to_dpo_proto(vnet_link_t linkt); + +/** + * @brief + * Take a reference counting lock on the DPO + */ +extern void dpo_lock(dpo_id_t *dpo); + +/** + * @brief + * Release a reference counting lock on the DPO + */ +extern void dpo_unlock(dpo_id_t *dpo); + +/** + * @brief Set/create a DPO ID + * The DPO will be locked. + * + * @param dpo + * The DPO object to configure + * + * @param type + * The dpo_type_t of the DPO + * + * @param proto + * The dpo_proto_t of the DPO + * + * @param index + * The type specific index of the DPO + */ +extern void dpo_set(dpo_id_t *dpo, + dpo_type_t type, + dpo_proto_t proto, + index_t index); + +/** + * @brief reset a DPO ID + * The DPO will be unlocked. + * + * @param dpo + * The DPO object to reset + */ +extern void dpo_reset(dpo_id_t *dpo); + +/** + * @brief compare two DPOs for equality + */ +extern int dpo_cmp(const dpo_id_t *dpo1, + const dpo_id_t *dpo2); + +/** + * @brief + * atomic copy a data-plane object. + * This is safe to use when the dst DPO is currently switching packets + */ +extern void dpo_copy(dpo_id_t *dst, + const dpo_id_t *src); + +/** + * @brief Return TRUE is the DPO is any type of adjacency + */ +extern int dpo_is_adj(const dpo_id_t *dpo); + +/** + * @biref Format a DPO_id_t oject + */ +extern u8 *format_dpo_id(u8 * s, va_list * args); + +/** + * @biref format a DPO type + */ +extern u8 *format_dpo_type(u8 * s, va_list * args); + +/** + * @brief format a DPO protocol + */ +extern u8 *format_dpo_proto(u8 * s, va_list * args); + +/** + * @brief + * Set and stack a DPO. + * The DPO passed is set to the parent DPO and the necessary + * VLIB graph arcs are created. The child_type and child_proto + * are used to get the VLID nodes from which the arcs are added. + * + * @param child_type + * Child DPO type. + * + * @param child_proto + * Child DPO proto + * + * @parem dpo + * This is the DPO to stack and set. + * + * @paren parent_dpo + * The parent DPO to stack onto. + */ +extern void dpo_stack(dpo_type_t child_type, + dpo_proto_t child_proto, + dpo_id_t *dpo, + const dpo_id_t *parent_dpo); + +/** + * @brief + * Set and stack a DPO. + * The DPO passed is set to the parent DPO and the necessary + * VLIB graph arcs are created, from the child_node passed. + * + * @param child_node + * The VLIB grpah node index to create an arc from to the parent + * + * @parem dpo + * This is the DPO to stack and set. + * + * @paren parent_dpo + * The parent DPO to stack onto. + */ +extern void dpo_stack_from_node(u32 child_node, + dpo_id_t *dpo, + const dpo_id_t *parent); + +/** + * @brief A lock function registered for a DPO type + */ +typedef void (*dpo_lock_fn_t)(dpo_id_t *dpo); + +/** + * @brief An unlock function registered for a DPO type + */ +typedef void (*dpo_unlock_fn_t)(dpo_id_t *dpo); + +/** + * @brief An memory usage show command + */ +typedef void (*dpo_mem_show_t)(void); + +/** + * @brief A virtual function table regisitered for a DPO type + */ +typedef struct dpo_vft_t_ +{ + /** + * A reference counting lock function + */ + dpo_lock_fn_t dv_lock; + /** + * A reference counting unlock function + */ + dpo_lock_fn_t dv_unlock; + /** + * A format function + */ + format_function_t *dv_format; + /** + * A show memory usage function + */ + dpo_mem_show_t dv_mem_show; +} dpo_vft_t; + + +/** + * @brief For a given DPO type Register: + * - a virtual function table + * - a NULL terminated array of graph nodes from which that object type + * will originate packets, i.e. the nodes in which the object type will be + * the parent DPO in the DP graph. The ndoes are per-data-path protocol + * (see above). + * + * @param type + * The type being registered. + * + * @param vft + * The virtual function table to register for the type. + * + * @param nodes + * The string description of the per-protocol VLIB graph nodes. + */ +extern void dpo_register(dpo_type_t type, + const dpo_vft_t *vft, + const char * const * const * nodes); + +/** + * @brief Create and register a new DPO type. + * + * This can be used by plugins to create new DPO types that are not listed + * in dpo_type_t enum + * + * @param vft + * The virtual function table to register for the type. + * + * @param nodes + * The string description of the per-protocol VLIB graph nodes. + * + * @return The new dpo_type_t + */ +extern dpo_type_t dpo_register_new_type(const dpo_vft_t *vft, + const char * const * const * nodes); + +#endif -- cgit 1.2.3-korg