From 0f26c5a0138ac86d7ebd197c31a09d8d624c35fe Mon Sep 17 00:00:00 2001 From: Neale Ranns Date: Wed, 1 Mar 2017 15:12:11 -0800 Subject: MPLS Mcast 1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns --- src/vnet/mpls/mpls.api | 87 ++++++++++++++++++++++++-------------------------- 1 file changed, 42 insertions(+), 45 deletions(-) (limited to 'src/vnet/mpls/mpls.api') diff --git a/src/vnet/mpls/mpls.api b/src/vnet/mpls/mpls.api index 2e3bfaf53f5..a1e1270a853 100644 --- a/src/vnet/mpls/mpls.api +++ b/src/vnet/mpls/mpls.api @@ -55,6 +55,7 @@ define mpls_ip_bind_unbind_reply @param context - sender context, to match reply w/ request @param mt_is_add - Is this a route add or delete @param mt_sw_if_index - The SW interface index of the tunnel to delete + @param mt_is_multicast - Is the tunnel's underlying LSP multicast @param mt_next_hop_proto_is_ip4 - The next-hop is IPV4 @param mt_next_hop_weight - The weight, for UCMP @param mt_next_hop[16] - the nextop address @@ -70,6 +71,7 @@ define mpls_tunnel_add_del u32 mt_sw_if_index; u8 mt_is_add; u8 mt_l2_only; + u8 mt_is_multicast; u8 mt_next_hop_proto_is_ip4; u8 mt_next_hop_weight; u8 mt_next_hop[16]; @@ -102,30 +104,43 @@ define mpls_tunnel_dump i32 tunnel_index; }; -/** \brief mpls eth tunnel operational state response - @param tunnel_index - eth tunnel identifier - @param intfc_address - interface ipv4 addr - @param mask_width - interface ipv4 addr mask - @param hw_if_index - interface id - @param l2_only - - @param tunnel_dst_mac - - @param tx_sw_if_index - - @param encap_index - reference to mpls label table - @param nlabels - number of resolved labels - @param labels - resolved labels +/** \brief FIB path + @param sw_if_index - index of the interface + @param weight - The weight, for UCMP + @param is_local - local if non-zero, else remote + @param is_drop - Drop the packet + @param is_unreach - Drop the packet and rate limit send ICMP unreachable + @param is_prohibit - Drop the packet and rate limit send ICMP prohibited + @param afi - the afi of the next hop, IP46_TYPE_IP4=1, IP46_TYPE_IP6=2 + @param next_hop[16] - the next hop address + + WARNING: this type is replicated, pending cleanup completion + +*/ +typeonly manual_print manual_endian define fib_path2 +{ + u32 sw_if_index; + u32 weight; + u8 is_local; + u8 is_drop; + u8 is_unreach; + u8 is_prohibit; + u8 afi; + u8 next_hop[16]; + u32 labels[16]; +}; + +/** \brief mpls tunnel details */ -define mpls_tunnel_details +manual_endian manual_print define mpls_tunnel_details { u32 context; - u32 tunnel_index; - u8 mt_l2_only; u8 mt_sw_if_index; - u8 mt_next_hop_proto_is_ip4; - u8 mt_next_hop[16]; - u32 mt_next_hop_sw_if_index; - u32 mt_next_hop_table_id; - u32 mt_next_hop_n_labels; - u32 mt_next_hop_out_labels[mt_next_hop_n_labels]; + u8 mt_tunnel_index; + u8 mt_l2_only; + u8 mt_is_multicast; + u32 mt_count; + vl_api_fib_path2_t mt_paths[mt_count]; }; /** \brief MPLS Route Add / del route @@ -140,10 +155,14 @@ define mpls_tunnel_details create them @param mr_is_add - Is this a route add or delete @param mr_is_classify - Is this route result a classify + @param mr_is_multicast - Is this a multicast route @param mr_is_multipath - Is this route update a multipath - i.e. is this a path addition to an existing route @param mr_is_resolve_host - Recurse resolution constraint via a host prefix @param mr_is_resolve_attached - Recurse resolution constraint via attached prefix + @param mr_is_interface_rx - Interface Receive path + @param mr_is_interface_rx - RPF-ID Receive path. The next-hop interface + is used as the RPF-ID @param mr_next_hop_proto_is_ip4 - The next-hop is IPV4 @param mr_next_hop_weight - The weight, for UCMP @param mr_next_hop[16] - the nextop address @@ -164,9 +183,12 @@ define mpls_route_add_del u8 mr_create_table_if_needed; u8 mr_is_add; u8 mr_is_classify; + u8 mr_is_multicast; u8 mr_is_multipath; u8 mr_is_resolve_host; u8 mr_is_resolve_attached; + u8 mr_is_interface_rx; + u8 mr_is_rpf_id; u8 mr_next_hop_proto_is_ip4; u8 mr_next_hop_weight; u8 mr_next_hop[16]; @@ -187,31 +209,6 @@ define mpls_route_add_del_reply i32 retval; }; -/** \brief FIB path - @param sw_if_index - index of the interface - @param weight - The weight, for UCMP - @param is_local - local if non-zero, else remote - @param is_drop - Drop the packet - @param is_unreach - Drop the packet and rate limit send ICMP unreachable - @param is_prohibit - Drop the packet and rate limit send ICMP prohibited - @param afi - the afi of the next hop, IP46_TYPE_IP4=1, IP46_TYPE_IP6=2 - @param next_hop[16] - the next hop address - - WARNING: this type is replicated, pending cleanup completion - -*/ -typeonly manual_print manual_endian define fib_path2 -{ - u32 sw_if_index; - u32 weight; - u8 is_local; - u8 is_drop; - u8 is_unreach; - u8 is_prohibit; - u8 afi; - u8 next_hop[16]; -}; - /** \brief Dump MPLS fib table @param client_index - opaque cookie to identify the sender */ -- cgit 1.2.3-korg