From 445d6658d0bbfbea42514cd24de8eab0db493d83 Mon Sep 17 00:00:00 2001 From: "Ranganathan T.S" Date: Wed, 15 Jun 2016 20:07:41 +0530 Subject: README file for vcgn Change-Id: I6bd851e4b26f0b8d6f5826a19bded3af930cbc0e Signed-off-by: Ranganathan T.S --- vnet/vnet/vcgn/README | 100 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 vnet/vnet/vcgn/README (limited to 'vnet') diff --git a/vnet/vnet/vcgn/README b/vnet/vnet/vcgn/README new file mode 100644 index 00000000000..9b903967ac4 --- /dev/null +++ b/vnet/vnet/vcgn/README @@ -0,0 +1,100 @@ + ================================= + CARRIER GRADE NAT - NAT44 README + ================================= + +What is implemented: +==================== +* NAT44 UDP, TCP, ICMP protocols +* Show and config commands for various parameters for the same +* NF9 logging is implemented but is not tested + +What is not implemented: +========================= +* TCP MSS +* TCP refresh direction +* Static port forwarding +* Syslog support +* Destination based logging or session logging +* None of the ALGs +* Performance optimization +* Binary APIs, suitable for configuring the feature from netconf/restconf/yang +* Support for VLANs + +Setup +===== + + +--------------+ ++------------+ GEb/0/0 | | +| Tester +-------------->+ vCGN/vPE-f | +| +<--------------+ VM in UCS | ++------------+ GE13/0/0 | | + +--------------+ + +Configure Interfaces and add routes in vPE-f +============================================= +set int ip address GigabitEthernetb/0/0 10.4.5.2/24 +set int state GigabitEthernetb/0/0 up +set int ip address GigabitEthernet13/0/0 20.4.5.2/24 +set int state GigabitEthernet13/0/0 up +ip route add 4.4.4.0/24 via GigabitEthernet13/0/0 +ip route add 1.2.3.0/24 via GigabitEthernetb/0/0 show ip fib + +Configure vCGN NAT44 for UDP/TCP/ICMP +======================================= +set vcgn inside GigabitEthernetb/0/0 outside GigabitEthernet13/0/0 +set vcgn port limit 65535 set vcgn dynamic port start 5641 +set vcgn map 10.1.1.0 - 10.1.1.31 set vcgn tcp timeout active 65535 init 65535 +set vcgn udp timeout active 65535 init 65535 set vcgn icmp timeout 65535 + +Set ARP entries for CGN to Tester +================================== +set ip arp GigabitEthernet13/0/0 4.4.4.4 11:22:33:44:55:00 +set ip arp GigabitEthernetb/0/0 1.2.3.0 11:22:33:44:55:10 +set ip arp GigabitEthernetb/0/0 1.2.3.1 11:22:33:44:55:12 +set ip arp GigabitEthernetb/0/0 1.2.3.2 11:22:33:44:55:13 +set ip arp GigabitEthernetb/0/0 1.2.3.3 11:22:33:44:55:14 +set ip arp GigabitEthernetb/0/0 1.2.3.4 11:22:33:4e:55:11 +set ip arp GigabitEthernetb/0/0 1.2.3.5 11:22:33:44:55:15 +set ip arp GigabitEthernetb/0/0 1.2.3.6 11:22:33:44:55:16 +set ip arp GigabitEthernetb/0/0 1.2.3.7 11:22:33:44:55:17 +set ip arp GigabitEthernetb/0/0 1.2.3.8 11:22:33:44:55:18 +set ip arp GigabitEthernetb/0/0 1.2.3.9 11:22:33:44:55:19 +set ip arp GigabitEthernetb/0/0 1.2.3.10 11:22:33:44:55:1a +set ip arp GigabitEthernetb/0/0 1.2.3.11 11:22:33:44:55:1b +set ip arp GigabitEthernetb/0/0 1.2.3.12 11:22:33:44:55:1c +set ip arp GigabitEthernetb/0/0 1.2.3.13 11:22:33:44:55:1d +set ip arp GigabitEthernetb/0/0 1.2.3.14 11:22:33:44:55:1e +set ip arp GigabitEthernetb/0/0 1.2.3.15 11:22:33:44:55:1f +set ip arp GigabitEthernetb/0/0 1.2.3.16 11:22:33:44:50:01 +set ip arp GigabitEthernetb/0/0 1.2.3.17 11:22:33:44:51:01 +set ip arp GigabitEthernetb/0/0 1.2.3.18 11:22:33:44:52:01 +set ip arp GigabitEthernetb/0/0 1.2.3.19 11:22:33:44:53:01 +set ip arp GigabitEthernetb/0/0 1.2.3.20 11:22:33:44:54:02 +set ip arp GigabitEthernetb/0/0 1.2.3.21 11:22:33:44:55:01 +set ip arp GigabitEthernetb/0/0 1.2.3.22 11:22:33:44:56:02 +set ip arp GigabitEthernetb/0/0 1.2.3.23 11:22:33:44:57:00 +set ip arp GigabitEthernetb/0/0 1.2.3.24 11:22:33:44:58:02 +set ip arp GigabitEthernetb/0/0 1.2.3.25 11:22:33:44:59:03 +set ip arp GigabitEthernetb/0/0 1.2.3.26 11:22:33:44:5a:01 +set ip arp GigabitEthernetb/0/0 1.2.3.27 11:22:33:44:5b:02 +set ip arp GigabitEthernetb/0/0 1.2.3.28 11:22:33:44:5c:03 +set ip arp GigabitEthernetb/0/0 1.2.3.29 11:22:33:44:5d:04 +set ip arp GigabitEthernetb/0/0 1.2.3.30 11:22:33:44:5e:05 +set ip arp GigabitEthernetb/0/0 1.2.3.31 11:22:33:44:5f:06 + + +Show commands +============= +show vcgn config +show vcgn statistics +show node counters +show interface + +Show commands to show translations +================================== +show vcgn inside-translation protocol tcp inside-addr 1.2.3.4 start-port 5641 end-port 5645 +show vcgn outside-translation protocol tcp outside-addr 10.1.1.31 start-port 7000 end-port 8000 +show vcgn inside-translation protocol icmp inside-addr 1.2.3.4 start-port 7000 end-port 8000 +show vcgn outside-translation protocol icmp outside-addr 10.1.1.31 start-port 7000 end-port 8000 + + -- cgit 1.2.3-korg