From 7e55d364fd88bb462c7211209f5cbb5bbae3a68c Mon Sep 17 00:00:00 2001 From: Dave Barach Date: Sat, 14 May 2016 18:38:48 -0400 Subject: VPP-63: clean up config scripts, remove specific hostnames Change-Id: Ifb77256fa691b1a90045a10448835c09b764e74f Signed-off-by: Dave Barach --- vnet/etc/scripts/dhcp/dhcpd.conf | 8 ++ vnet/etc/scripts/dhcp/left-ping-target.sh | 4 + vnet/etc/scripts/dhcp/leftpeer.conf | 17 +++ vnet/etc/scripts/dhcp/ludd-cluster-1 | 17 --- vnet/etc/scripts/dhcp/ludd-cluster-2-sh | 4 - vnet/etc/scripts/dhcp/ludd-cluster-5-dhcpd.conf | 8 -- .../scripts/dhcp/ludd-cluster-5-isc-dhcp-server | 3 - vnet/etc/scripts/leftpeer/leftpeer-classify | 8 ++ vnet/etc/scripts/leftpeer/leftpeer-classify6 | 5 + vnet/etc/scripts/leftpeer/leftpeer-classifyl2 | 8 ++ vnet/etc/scripts/leftpeer/leftpeer-dhcp | 23 ++++ vnet/etc/scripts/leftpeer/leftpeer-ioam.conf | 15 +++ vnet/etc/scripts/leftpeer/leftpeer-l3vxlan.conf | 12 +++ vnet/etc/scripts/leftpeer/leftpeer-lisp.conf | 18 ++++ vnet/etc/scripts/leftpeer/leftpeer-mpls.conf | 17 +++ vnet/etc/scripts/leftpeer/leftpeer-nsh.conf | 18 ++++ vnet/etc/scripts/leftpeer/leftpeer-sr.conf | 24 +++++ vnet/etc/scripts/leftpeer/leftpeer-vxlan.conf | 17 +++ vnet/etc/scripts/leftpeer/leftpeer-vxnsh.conf | 18 ++++ vnet/etc/scripts/leftpeer/leftpeer.script | 9 ++ vnet/etc/scripts/ludd-cluster-1/lc1.script | 9 -- .../scripts/ludd-cluster-1/ludd-cluster-1-classify | 8 -- .../ludd-cluster-1/ludd-cluster-1-classify6 | 5 - .../ludd-cluster-1/ludd-cluster-1-classifyl2 | 8 -- .../etc/scripts/ludd-cluster-1/ludd-cluster-1-dhcp | 23 ---- .../ludd-cluster-1/ludd-cluster-1-ioam.conf | 15 --- .../ludd-cluster-1/ludd-cluster-1-l3vxlan.conf | 12 --- .../ludd-cluster-1/ludd-cluster-1-lisp.conf | 18 ---- .../ludd-cluster-1/ludd-cluster-1-mpls.conf | 17 --- .../scripts/ludd-cluster-1/ludd-cluster-1-nsh.conf | 18 ---- .../scripts/ludd-cluster-1/ludd-cluster-1-sr.conf | 24 ----- .../ludd-cluster-1/ludd-cluster-1-vxlan.conf | 17 --- .../ludd-cluster-1/ludd-cluster-1-vxnsh.conf | 18 ---- vnet/etc/scripts/ludd-cluster-3/lc3.script | 9 -- .../ludd-cluster-3/ludd-cluster-3-ioam.conf | 14 --- .../ludd-cluster-3/ludd-cluster-3-l3vxlan.conf | 12 --- .../ludd-cluster-3/ludd-cluster-3-lisp.conf | 16 --- .../ludd-cluster-3/ludd-cluster-3-mpls-l2.conf | 24 ----- .../ludd-cluster-3/ludd-cluster-3-mpls.conf | 17 --- .../scripts/ludd-cluster-3/ludd-cluster-3-nsh.conf | 19 ---- .../scripts/ludd-cluster-3/ludd-cluster-3-sr.conf | 28 ----- .../ludd-cluster-3/ludd-cluster-3-vxlan.conf | 16 --- .../ludd-cluster-3/ludd-cluster-3-vxnsh.conf | 18 ---- vnet/etc/scripts/mpls-o-ethernet/leftpeer.conf | 17 +++ .../scripts/mpls-o-ethernet/ludd-cluster-1.conf | 17 --- .../scripts/mpls-o-ethernet/ludd-cluster-3.conf | 17 --- vnet/etc/scripts/mpls-o-ethernet/rightpeer.conf | 15 +++ vnet/etc/scripts/mpls-o-gre/dhcpd.conf | 116 +++++++++++++++++++++ vnet/etc/scripts/mpls-o-gre/leftpeer.conf | 14 +++ vnet/etc/scripts/mpls-o-gre/ludd-cluster-1.conf | 17 --- vnet/etc/scripts/mpls-o-gre/ludd-cluster-3.conf | 17 --- .../scripts/mpls-o-gre/ludd-cluster-5-dhcpd.conf | 116 --------------------- vnet/etc/scripts/mpls-o-gre/rightpeer.conf | 14 +++ vnet/etc/scripts/rightpeer/rightpeer-ioam.conf | 14 +++ vnet/etc/scripts/rightpeer/rightpeer-l3vxlan.conf | 9 ++ vnet/etc/scripts/rightpeer/rightpeer-lisp.conf | 16 +++ vnet/etc/scripts/rightpeer/rightpeer-mpls-l2.conf | 24 +++++ vnet/etc/scripts/rightpeer/rightpeer-mpls.conf | 17 +++ vnet/etc/scripts/rightpeer/rightpeer-nsh.conf | 19 ++++ vnet/etc/scripts/rightpeer/rightpeer-sr.conf | 28 +++++ vnet/etc/scripts/rightpeer/rightpeer-vxlan.conf | 16 +++ vnet/etc/scripts/rightpeer/rightpeer-vxnsh.conf | 18 ++++ vnet/etc/scripts/rightpeer/rightpeer.script | 9 ++ vnet/etc/scripts/sr/left-linux-ping.sh | 3 + vnet/etc/scripts/sr/leftpeer.conf | 27 +++++ vnet/etc/scripts/sr/ludd-cluster-1.conf | 27 ----- vnet/etc/scripts/sr/ludd-cluster-2.sh | 3 - vnet/etc/scripts/sr/ludd-cluster-3.conf | 22 ---- vnet/etc/scripts/sr/ludd-cluster-4.sh | 4 - vnet/etc/scripts/sr/right-linux-ping.sh | 4 + vnet/etc/scripts/sr/rightpeer.conf | 22 ++++ 71 files changed, 623 insertions(+), 637 deletions(-) create mode 100644 vnet/etc/scripts/dhcp/dhcpd.conf create mode 100644 vnet/etc/scripts/dhcp/left-ping-target.sh create mode 100644 vnet/etc/scripts/dhcp/leftpeer.conf delete mode 100644 vnet/etc/scripts/dhcp/ludd-cluster-1 delete mode 100644 vnet/etc/scripts/dhcp/ludd-cluster-2-sh delete mode 100644 vnet/etc/scripts/dhcp/ludd-cluster-5-dhcpd.conf delete mode 100644 vnet/etc/scripts/dhcp/ludd-cluster-5-isc-dhcp-server create mode 100755 vnet/etc/scripts/leftpeer/leftpeer-classify create mode 100644 vnet/etc/scripts/leftpeer/leftpeer-classify6 create mode 100644 vnet/etc/scripts/leftpeer/leftpeer-classifyl2 create mode 100644 vnet/etc/scripts/leftpeer/leftpeer-dhcp create mode 100644 vnet/etc/scripts/leftpeer/leftpeer-ioam.conf create mode 100644 vnet/etc/scripts/leftpeer/leftpeer-l3vxlan.conf create mode 100644 vnet/etc/scripts/leftpeer/leftpeer-lisp.conf create mode 100644 vnet/etc/scripts/leftpeer/leftpeer-mpls.conf create mode 100644 vnet/etc/scripts/leftpeer/leftpeer-nsh.conf create mode 100644 vnet/etc/scripts/leftpeer/leftpeer-sr.conf create mode 100644 vnet/etc/scripts/leftpeer/leftpeer-vxlan.conf create mode 100644 vnet/etc/scripts/leftpeer/leftpeer-vxnsh.conf create mode 100644 vnet/etc/scripts/leftpeer/leftpeer.script delete mode 100644 vnet/etc/scripts/ludd-cluster-1/lc1.script delete mode 100755 vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-classify delete mode 100644 vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-classify6 delete mode 100644 vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-classifyl2 delete mode 100644 vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-dhcp delete mode 100644 vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-ioam.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-l3vxlan.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-lisp.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-mpls.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-nsh.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-sr.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-vxlan.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-vxnsh.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-3/lc3.script delete mode 100644 vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-ioam.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-l3vxlan.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-lisp.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-mpls-l2.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-mpls.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-nsh.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-sr.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-vxlan.conf delete mode 100644 vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-vxnsh.conf create mode 100644 vnet/etc/scripts/mpls-o-ethernet/leftpeer.conf delete mode 100644 vnet/etc/scripts/mpls-o-ethernet/ludd-cluster-1.conf delete mode 100644 vnet/etc/scripts/mpls-o-ethernet/ludd-cluster-3.conf create mode 100644 vnet/etc/scripts/mpls-o-ethernet/rightpeer.conf create mode 100644 vnet/etc/scripts/mpls-o-gre/dhcpd.conf create mode 100644 vnet/etc/scripts/mpls-o-gre/leftpeer.conf delete mode 100644 vnet/etc/scripts/mpls-o-gre/ludd-cluster-1.conf delete mode 100644 vnet/etc/scripts/mpls-o-gre/ludd-cluster-3.conf delete mode 100644 vnet/etc/scripts/mpls-o-gre/ludd-cluster-5-dhcpd.conf create mode 100644 vnet/etc/scripts/mpls-o-gre/rightpeer.conf create mode 100644 vnet/etc/scripts/rightpeer/rightpeer-ioam.conf create mode 100644 vnet/etc/scripts/rightpeer/rightpeer-l3vxlan.conf create mode 100644 vnet/etc/scripts/rightpeer/rightpeer-lisp.conf create mode 100644 vnet/etc/scripts/rightpeer/rightpeer-mpls-l2.conf create mode 100644 vnet/etc/scripts/rightpeer/rightpeer-mpls.conf create mode 100644 vnet/etc/scripts/rightpeer/rightpeer-nsh.conf create mode 100644 vnet/etc/scripts/rightpeer/rightpeer-sr.conf create mode 100644 vnet/etc/scripts/rightpeer/rightpeer-vxlan.conf create mode 100644 vnet/etc/scripts/rightpeer/rightpeer-vxnsh.conf create mode 100644 vnet/etc/scripts/rightpeer/rightpeer.script create mode 100755 vnet/etc/scripts/sr/left-linux-ping.sh create mode 100644 vnet/etc/scripts/sr/leftpeer.conf delete mode 100644 vnet/etc/scripts/sr/ludd-cluster-1.conf delete mode 100755 vnet/etc/scripts/sr/ludd-cluster-2.sh delete mode 100644 vnet/etc/scripts/sr/ludd-cluster-3.conf delete mode 100755 vnet/etc/scripts/sr/ludd-cluster-4.sh create mode 100755 vnet/etc/scripts/sr/right-linux-ping.sh create mode 100644 vnet/etc/scripts/sr/rightpeer.conf (limited to 'vnet') diff --git a/vnet/etc/scripts/dhcp/dhcpd.conf b/vnet/etc/scripts/dhcp/dhcpd.conf new file mode 100644 index 00000000000..d4cb3ed718a --- /dev/null +++ b/vnet/etc/scripts/dhcp/dhcpd.conf @@ -0,0 +1,8 @@ +# add at the bottom + +subnet 192.168.0.0 netmask 255.255.0.0 { + range 192.168.1.10 192.168.1.254; + option routers 192.168.1.1; + default-lease-time 15; + max-lease-time 15; +} diff --git a/vnet/etc/scripts/dhcp/left-ping-target.sh b/vnet/etc/scripts/dhcp/left-ping-target.sh new file mode 100644 index 00000000000..2edc2a50eaa --- /dev/null +++ b/vnet/etc/scripts/dhcp/left-ping-target.sh @@ -0,0 +1,4 @@ +#!/bin/bash + +# to obtain dhcp address from leftpeer +dhclient -d -v eth1 diff --git a/vnet/etc/scripts/dhcp/leftpeer.conf b/vnet/etc/scripts/dhcp/leftpeer.conf new file mode 100644 index 00000000000..458eecf0caf --- /dev/null +++ b/vnet/etc/scripts/dhcp/leftpeer.conf @@ -0,0 +1,17 @@ +set int ip table GigabitEthernet2/2/0 12 +set int ip address GigabitEthernet2/2/0 192.168.1.1/24 +set int state GigabitEthernet2/2/0 up + +set int ip table GigabitEthernet2/7/0 11 +set int ip address GigabitEthernet2/7/0 192.168.2.1/24 +set int state GigabitEthernet2/7/0 up + +comment { set dhcp proxy server 1.2.3.4 src-address 1.2.3.5 add-option-82 rx-fib-id 0 server-fib-id 0 } + +comment { set dhcp proxy server 192.168.2.2 src-address 192.168.2.1 add-option-82 rx-fib-id 12 server-fib-id 11 } + +ip route add 0.0.0.0/24 table 11 via local +ip route add 255.255.255.255/24 table 11 via local + +ip route add 0.0.0.0/24 table 12 via local +ip route add 255.255.255.255/24 table 12 via local diff --git a/vnet/etc/scripts/dhcp/ludd-cluster-1 b/vnet/etc/scripts/dhcp/ludd-cluster-1 deleted file mode 100644 index 458eecf0caf..00000000000 --- a/vnet/etc/scripts/dhcp/ludd-cluster-1 +++ /dev/null @@ -1,17 +0,0 @@ -set int ip table GigabitEthernet2/2/0 12 -set int ip address GigabitEthernet2/2/0 192.168.1.1/24 -set int state GigabitEthernet2/2/0 up - -set int ip table GigabitEthernet2/7/0 11 -set int ip address GigabitEthernet2/7/0 192.168.2.1/24 -set int state GigabitEthernet2/7/0 up - -comment { set dhcp proxy server 1.2.3.4 src-address 1.2.3.5 add-option-82 rx-fib-id 0 server-fib-id 0 } - -comment { set dhcp proxy server 192.168.2.2 src-address 192.168.2.1 add-option-82 rx-fib-id 12 server-fib-id 11 } - -ip route add 0.0.0.0/24 table 11 via local -ip route add 255.255.255.255/24 table 11 via local - -ip route add 0.0.0.0/24 table 12 via local -ip route add 255.255.255.255/24 table 12 via local diff --git a/vnet/etc/scripts/dhcp/ludd-cluster-2-sh b/vnet/etc/scripts/dhcp/ludd-cluster-2-sh deleted file mode 100644 index 32924ecc5e5..00000000000 --- a/vnet/etc/scripts/dhcp/ludd-cluster-2-sh +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/bash - -# to obtain dhcp address from ludd-cluster-1 -dhclient -d -v eth1 diff --git a/vnet/etc/scripts/dhcp/ludd-cluster-5-dhcpd.conf b/vnet/etc/scripts/dhcp/ludd-cluster-5-dhcpd.conf deleted file mode 100644 index d4cb3ed718a..00000000000 --- a/vnet/etc/scripts/dhcp/ludd-cluster-5-dhcpd.conf +++ /dev/null @@ -1,8 +0,0 @@ -# add at the bottom - -subnet 192.168.0.0 netmask 255.255.0.0 { - range 192.168.1.10 192.168.1.254; - option routers 192.168.1.1; - default-lease-time 15; - max-lease-time 15; -} diff --git a/vnet/etc/scripts/dhcp/ludd-cluster-5-isc-dhcp-server b/vnet/etc/scripts/dhcp/ludd-cluster-5-isc-dhcp-server deleted file mode 100644 index 6fafc1eec13..00000000000 --- a/vnet/etc/scripts/dhcp/ludd-cluster-5-isc-dhcp-server +++ /dev/null @@ -1,3 +0,0 @@ -# add eth6 to interfaces - -INTERFACES="eth6" diff --git a/vnet/etc/scripts/leftpeer/leftpeer-classify b/vnet/etc/scripts/leftpeer/leftpeer-classify new file mode 100755 index 00000000000..74285912aeb --- /dev/null +++ b/vnet/etc/scripts/leftpeer/leftpeer-classify @@ -0,0 +1,8 @@ +classify table mask l2 src l3 ip4 src buckets 2 miss-next local + +comment { classify table mask l3 ip4 src buckets 2 miss-next local } +set ip classify intfc GigabitEthernet2/2/0 table-index 0 +set int ip address GigabitEthernet2/2/0 192.168.1.1/24 +set int state GigabitEthernet2/2/0 up + +classify session hit-next local table-index 0 match l2 src 00:50:56:b7:05:bb l3 ip4 src 192.168.1.2 diff --git a/vnet/etc/scripts/leftpeer/leftpeer-classify6 b/vnet/etc/scripts/leftpeer/leftpeer-classify6 new file mode 100644 index 00000000000..6579d50d3c5 --- /dev/null +++ b/vnet/etc/scripts/leftpeer/leftpeer-classify6 @@ -0,0 +1,5 @@ +classify table mask l3 ip6 src buckets 2 miss-next local +set ip6 classify intfc GigabitEthernet2/2/0 table-index 0 +set int ip address GigabitEthernet2/2/0 db01::1/64 +set int state GigabitEthernet2/2/0 up +classify session hit-next local table-index 0 match l3 ip6 src db01::2 diff --git a/vnet/etc/scripts/leftpeer/leftpeer-classifyl2 b/vnet/etc/scripts/leftpeer/leftpeer-classifyl2 new file mode 100644 index 00000000000..6be4b1e52cf --- /dev/null +++ b/vnet/etc/scripts/leftpeer/leftpeer-classifyl2 @@ -0,0 +1,8 @@ +set int ip address GigabitEthernet2/2/0 192.168.1.1/24 +set int state GigabitEthernet2/2/0 up + +classify table mask l3 ip4 src buckets 2 l2-miss-next ethernet + +classify session advance 14 l2-hit-next ip4 table-index 0 match l3 ip4 src 192.168.1.2 + +set int l2 class intfc GigabitEthernet2/2/0 ip4-table 0 diff --git a/vnet/etc/scripts/leftpeer/leftpeer-dhcp b/vnet/etc/scripts/leftpeer/leftpeer-dhcp new file mode 100644 index 00000000000..c13a8f3aa5e --- /dev/null +++ b/vnet/etc/scripts/leftpeer/leftpeer-dhcp @@ -0,0 +1,23 @@ +loop cre +set int ip table loop0 12 +set int ip address loop0 192.168.1.1/24 +set int state loop0 up + +set int ip table GigabitEthernet2/2/0 12 +comment { set int ip address GigabitEthernet2/2/0 192.168.1.1/24 } +set int unnumbered GigabitEthernet2/2/0 use loop0 +set int state GigabitEthernet2/2/0 up + +set int ip table GigabitEthernet2/7/0 11 +set int ip address GigabitEthernet2/7/0 192.168.2.1/24 +set int state GigabitEthernet2/7/0 up + +uncomment { set dhcp proxy server 1.2.3.4 src-address 1.2.3.5 add-option-82 rx-fib-id 0 server-fib-id 0 } + +uncomment { set dhcp proxy server 192.168.2.2 src-address 192.168.2.1 add-option-82 rx-fib-id 12 server-fib-id 11 } + +ip route add 0.0.0.0/24 table 11 via local +ip route add 255.255.255.255/24 table 11 via local + +ip route add 0.0.0.0/24 table 12 via local +ip route add 255.255.255.255/24 table 12 via local diff --git a/vnet/etc/scripts/leftpeer/leftpeer-ioam.conf b/vnet/etc/scripts/leftpeer/leftpeer-ioam.conf new file mode 100644 index 00000000000..6c1b502c2f7 --- /dev/null +++ b/vnet/etc/scripts/leftpeer/leftpeer-ioam.conf @@ -0,0 +1,15 @@ +comment { connects to linux ping source eth1 addr db02::2/64 } +set int ip address GigabitEthernet2/2/0 db02::1/64 +set int state GigabitEthernet2/2/0 up + +comment { connects to ioam domain rightpeer eth2 addr db03::3/64 } +set int ip address GigabitEthernet2/3/0 db03::1/64 +set int state GigabitEthernet2/3/0 up + +ioam set rewrite trace-elts 2 pow + +set ip6 neighbor GigabitEthernet2/3/0 db03::3 00:50:56:b7:05:cb + +ip route add db04::0/64 via db03::3 + +ioam set destination db04::0/64 add diff --git a/vnet/etc/scripts/leftpeer/leftpeer-l3vxlan.conf b/vnet/etc/scripts/leftpeer/leftpeer-l3vxlan.conf new file mode 100644 index 00000000000..a75f9b4c8ae --- /dev/null +++ b/vnet/etc/scripts/leftpeer/leftpeer-l3vxlan.conf @@ -0,0 +1,12 @@ +comment { tunnel to rightpeer 6.0.3.3 on vlan 101 } + +set int ip address GigabitEthernet2/3/0 6.0.3.1/24 +set int state GigabitEthernet2/3/0 up + +comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } + +set int ip address GigabitEthernet2/2/0 6.0.2.1/24 +set int state GigabitEthernet2/2/0 up + +vxlan tunnel src 6.0.3.1 peer 6.0.3.3 vni 123 adj 6.0.4.4/24 + diff --git a/vnet/etc/scripts/leftpeer/leftpeer-lisp.conf b/vnet/etc/scripts/leftpeer/leftpeer-lisp.conf new file mode 100644 index 00000000000..cb3180b711d --- /dev/null +++ b/vnet/etc/scripts/leftpeer/leftpeer-lisp.conf @@ -0,0 +1,18 @@ +comment { vpe_phase2 configuration } + +comment { local client facing interface on vlan 100 } +comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } + +set int ip address GigabitEthernet2/2/0 6.0.2.1/24 +set int state GigabitEthernet2/2/0 up + +comment { tunnel to rightpeer on vlan 101 } +set int ip address GigabitEthernet2/3/0 6.0.3.1/24 +set int state GigabitEthernet2/3/0 up + +lisp gpe tunnel src 6.0.3.1 dst 6.0.3.3 next-ip4 decap-next ip4 iid 1133 +set int ip address lisp_gpe_tunnel0 6.0.4.1/24 +set int state lisp_gpe_tunnel0 up + +lisp gpe tunnel src 6.0.3.3 dst 6.0.3.1 next-ip4 decap-next ip4 iid 3311 +set int stat lisp_gpe_tunnel1 up diff --git a/vnet/etc/scripts/leftpeer/leftpeer-mpls.conf b/vnet/etc/scripts/leftpeer/leftpeer-mpls.conf new file mode 100644 index 00000000000..74bce81b190 --- /dev/null +++ b/vnet/etc/scripts/leftpeer/leftpeer-mpls.conf @@ -0,0 +1,17 @@ +comment { vpe_phase2 configuration } + +comment { local client facing interface on vlan 100 } +comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } + +set int ip table GigabitEthernet2/2/0 1 +set int ip address GigabitEthernet2/2/0 6.0.2.1/24 +set int state GigabitEthernet2/2/0 up + +comment { tunnel to rightpeer on vlan 101 } +set int ip address GigabitEthernet2/3/0 6.0.3.1/24 +set int state GigabitEthernet2/3/0 up + +mpls encap add label 30 fib 1 dest 6.0.3.3 +mpls decap add label 30 fib 1 + +create mpls gre tunnel src 6.0.3.1 dst 6.0.3.3 intfc 6.0.4.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/vnet/etc/scripts/leftpeer/leftpeer-nsh.conf b/vnet/etc/scripts/leftpeer/leftpeer-nsh.conf new file mode 100644 index 00000000000..6397a3816dd --- /dev/null +++ b/vnet/etc/scripts/leftpeer/leftpeer-nsh.conf @@ -0,0 +1,18 @@ +comment { vpe_phase2 configuration } + +comment { local client facing interface on vlan 100 } +comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } + +set int ip address GigabitEthernet2/2/0 6.0.2.1/24 +set int state GigabitEthernet2/2/0 up + +comment { tunnel to rightpeer on vlan 101 } +set int ip address GigabitEthernet2/3/0 6.0.3.1/24 +set int state GigabitEthernet2/3/0 up + +nsh gre tunnel src 6.0.3.1 dst 6.0.3.3 c1 1 c2 2 c3 3 c4 4 spi 1133 si 0 next-ip4 +set int ip address nsh_gre_tunnel0 6.0.4.1/24 +set int state nsh_gre_tunnel0 up + +nsh gre tunnel src 6.0.3.3 dst 6.0.3.1 c1 1 c2 2 c3 3 c4 4 spi 3311 si 0 next-ip4 +set int stat nsh_gre_tunnel1 up diff --git a/vnet/etc/scripts/leftpeer/leftpeer-sr.conf b/vnet/etc/scripts/leftpeer/leftpeer-sr.conf new file mode 100644 index 00000000000..a7b962d3aba --- /dev/null +++ b/vnet/etc/scripts/leftpeer/leftpeer-sr.conf @@ -0,0 +1,24 @@ +comment { test sr segment chunk-offset on } +test sr hmac validate on + +comment { trunk to rightpeer } +set int ip address GigabitEthernet2/3/0 db03::2/64 +enable ip6 interface GigabitEthernet2/3/0 +set int state GigabitEthernet2/3/0 up + +comment { subscriber linux-ping-source } +set int ip address GigabitEthernet2/2/0 db02::2/64 +enable ip6 interface GigabitEthernet2/2/0 +set int state GigabitEthernet2/2/0 up + +sr hmac id 2 key Gozzer +sr hmac id 3 key Hoser + +sr tunnel src db01::1 dst db04::1/128 next db03::1 next db04::1 tag db02::2 clean key Gozzer InPE 1 + +tap connect srlocal hwaddr random +set int ip6 table tap-0 1 +set int ip address tap-0 db04::99/64 +enable ip6 interface tap-0 +set int state tap-0 up +ip route add table 1 db02::0/64 lookup in table 0 diff --git a/vnet/etc/scripts/leftpeer/leftpeer-vxlan.conf b/vnet/etc/scripts/leftpeer/leftpeer-vxlan.conf new file mode 100644 index 00000000000..d50e8bf49f3 --- /dev/null +++ b/vnet/etc/scripts/leftpeer/leftpeer-vxlan.conf @@ -0,0 +1,17 @@ +comment { tunnel to rightpeer 6.0.3.3 on vlan 101 } + +set int ip address GigabitEthernet2/3/0 6.0.3.1/24 +set int state GigabitEthernet2/3/0 up + +comment { tunnel to thirdpeer 6.0.5.5 on vlan 105 } +set int ip address GigabitEthernet2/7/0 6.0.5.1/24 +set int state GigabitEthernet2/7/0 up + +comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } + +set int ip address GigabitEthernet2/2/0 6.0.2.1/24 +set int state GigabitEthernet2/2/0 up + +vxlan tunnel src 6.0.3.1 peer 6.0.3.3 peer 6.0.3.5 vni 123 +vxlan l2 GigabitEthernet2/2/0 vni 123 + diff --git a/vnet/etc/scripts/leftpeer/leftpeer-vxnsh.conf b/vnet/etc/scripts/leftpeer/leftpeer-vxnsh.conf new file mode 100644 index 00000000000..69bd9d9de20 --- /dev/null +++ b/vnet/etc/scripts/leftpeer/leftpeer-vxnsh.conf @@ -0,0 +1,18 @@ +comment { vpe_phase2 configuration } + +comment { local client facing interface on vlan 100 } +comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } + +set int ip address GigabitEthernet2/2/0 6.0.2.1/24 +set int state GigabitEthernet2/2/0 up + +comment { tunnel to rightpeer on vlan 101 } +set int ip address GigabitEthernet2/3/0 6.0.3.1/24 +set int state GigabitEthernet2/3/0 up + +nsh vxlan tunnel src 6.0.3.1 dst 6.0.3.3 c1 1 c2 2 c3 3 c4 4 vni 11 spi 1133 si 0 next-ip4 +set int ip address nsh_vxlan_gpe_tunnel0 6.0.4.1/24 +set int state nsh_vxlan_gpe_tunnel0 up + +nsh vxlan tunnel src 6.0.3.3 dst 6.0.3.1 c1 1 c2 2 c3 3 c4 4 vni 33 spi 3311 si 0 next-ip4 +set int stat nsh_vxlan_gpe_tunnel1 up diff --git a/vnet/etc/scripts/leftpeer/leftpeer.script b/vnet/etc/scripts/leftpeer/leftpeer.script new file mode 100644 index 00000000000..f08c809012c --- /dev/null +++ b/vnet/etc/scripts/leftpeer/leftpeer.script @@ -0,0 +1,9 @@ +l2tp_set_lookup_key lookup_v6_src + +sw_interface_add_del_address GigabitEthernet2/3/0 db03::2/64 +sw_interface_set_flags GigabitEthernet2/3/0 admin-up + +comment sw_interface_add_del_address GigabitEthernet2/2/0 db02::2/64 +sw_interface_set_flags GigabitEthernet2/2/0 admin-up + +l2tp_session_add_del client_address db03::1 our_address db03::2 GigabitEthernet2/2/0 local_session_id 1 remote_session_id 3 local_cookie 11 remote_cookie 33 diff --git a/vnet/etc/scripts/ludd-cluster-1/lc1.script b/vnet/etc/scripts/ludd-cluster-1/lc1.script deleted file mode 100644 index f08c809012c..00000000000 --- a/vnet/etc/scripts/ludd-cluster-1/lc1.script +++ /dev/null @@ -1,9 +0,0 @@ -l2tp_set_lookup_key lookup_v6_src - -sw_interface_add_del_address GigabitEthernet2/3/0 db03::2/64 -sw_interface_set_flags GigabitEthernet2/3/0 admin-up - -comment sw_interface_add_del_address GigabitEthernet2/2/0 db02::2/64 -sw_interface_set_flags GigabitEthernet2/2/0 admin-up - -l2tp_session_add_del client_address db03::1 our_address db03::2 GigabitEthernet2/2/0 local_session_id 1 remote_session_id 3 local_cookie 11 remote_cookie 33 diff --git a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-classify b/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-classify deleted file mode 100755 index 74285912aeb..00000000000 --- a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-classify +++ /dev/null @@ -1,8 +0,0 @@ -classify table mask l2 src l3 ip4 src buckets 2 miss-next local - -comment { classify table mask l3 ip4 src buckets 2 miss-next local } -set ip classify intfc GigabitEthernet2/2/0 table-index 0 -set int ip address GigabitEthernet2/2/0 192.168.1.1/24 -set int state GigabitEthernet2/2/0 up - -classify session hit-next local table-index 0 match l2 src 00:50:56:b7:05:bb l3 ip4 src 192.168.1.2 diff --git a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-classify6 b/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-classify6 deleted file mode 100644 index 6579d50d3c5..00000000000 --- a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-classify6 +++ /dev/null @@ -1,5 +0,0 @@ -classify table mask l3 ip6 src buckets 2 miss-next local -set ip6 classify intfc GigabitEthernet2/2/0 table-index 0 -set int ip address GigabitEthernet2/2/0 db01::1/64 -set int state GigabitEthernet2/2/0 up -classify session hit-next local table-index 0 match l3 ip6 src db01::2 diff --git a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-classifyl2 b/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-classifyl2 deleted file mode 100644 index 6be4b1e52cf..00000000000 --- a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-classifyl2 +++ /dev/null @@ -1,8 +0,0 @@ -set int ip address GigabitEthernet2/2/0 192.168.1.1/24 -set int state GigabitEthernet2/2/0 up - -classify table mask l3 ip4 src buckets 2 l2-miss-next ethernet - -classify session advance 14 l2-hit-next ip4 table-index 0 match l3 ip4 src 192.168.1.2 - -set int l2 class intfc GigabitEthernet2/2/0 ip4-table 0 diff --git a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-dhcp b/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-dhcp deleted file mode 100644 index c13a8f3aa5e..00000000000 --- a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-dhcp +++ /dev/null @@ -1,23 +0,0 @@ -loop cre -set int ip table loop0 12 -set int ip address loop0 192.168.1.1/24 -set int state loop0 up - -set int ip table GigabitEthernet2/2/0 12 -comment { set int ip address GigabitEthernet2/2/0 192.168.1.1/24 } -set int unnumbered GigabitEthernet2/2/0 use loop0 -set int state GigabitEthernet2/2/0 up - -set int ip table GigabitEthernet2/7/0 11 -set int ip address GigabitEthernet2/7/0 192.168.2.1/24 -set int state GigabitEthernet2/7/0 up - -uncomment { set dhcp proxy server 1.2.3.4 src-address 1.2.3.5 add-option-82 rx-fib-id 0 server-fib-id 0 } - -uncomment { set dhcp proxy server 192.168.2.2 src-address 192.168.2.1 add-option-82 rx-fib-id 12 server-fib-id 11 } - -ip route add 0.0.0.0/24 table 11 via local -ip route add 255.255.255.255/24 table 11 via local - -ip route add 0.0.0.0/24 table 12 via local -ip route add 255.255.255.255/24 table 12 via local diff --git a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-ioam.conf b/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-ioam.conf deleted file mode 100644 index 5234ace39bf..00000000000 --- a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-ioam.conf +++ /dev/null @@ -1,15 +0,0 @@ -comment { connects to ludd-cluster-2 eth1 addr db02::2/64 } -set int ip address GigabitEthernet2/2/0 db02::1/64 -set int state GigabitEthernet2/2/0 up - -comment { connects to ioam domain ludd-cluster-3 eth2 addr db03::3/64 } -set int ip address GigabitEthernet2/3/0 db03::1/64 -set int state GigabitEthernet2/3/0 up - -ioam set rewrite trace-elts 2 pow - -set ip6 neighbor GigabitEthernet2/3/0 db03::3 00:50:56:b7:05:cb - -ip route add db04::0/64 via db03::3 - -ioam set destination db04::0/64 add diff --git a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-l3vxlan.conf b/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-l3vxlan.conf deleted file mode 100644 index ed43059dea9..00000000000 --- a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-l3vxlan.conf +++ /dev/null @@ -1,12 +0,0 @@ -comment { tunnel to ludd-cluster-3 6.0.3.3 on vlan 101 } - -set int ip address GigabitEthernet2/3/0 6.0.3.1/24 -set int state GigabitEthernet2/3/0 up - -comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } - -set int ip address GigabitEthernet2/2/0 6.0.2.1/24 -set int state GigabitEthernet2/2/0 up - -vxlan tunnel src 6.0.3.1 peer 6.0.3.3 vni 123 adj 6.0.4.4/24 - diff --git a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-lisp.conf b/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-lisp.conf deleted file mode 100644 index 15a6ccb3b24..00000000000 --- a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-lisp.conf +++ /dev/null @@ -1,18 +0,0 @@ -comment { vpe_phase2 configuration } - -comment { local client facing interface on vlan 100 } -comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } - -set int ip address GigabitEthernet2/2/0 6.0.2.1/24 -set int state GigabitEthernet2/2/0 up - -comment { tunnel to ludd-cluster-3 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.1/24 -set int state GigabitEthernet2/3/0 up - -lisp gpe tunnel src 6.0.3.1 dst 6.0.3.3 next-ip4 decap-next ip4 iid 1133 -set int ip address lisp_gpe_tunnel0 6.0.4.1/24 -set int state lisp_gpe_tunnel0 up - -lisp gpe tunnel src 6.0.3.3 dst 6.0.3.1 next-ip4 decap-next ip4 iid 3311 -set int stat lisp_gpe_tunnel1 up diff --git a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-mpls.conf b/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-mpls.conf deleted file mode 100644 index b6cf8cd62c8..00000000000 --- a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-mpls.conf +++ /dev/null @@ -1,17 +0,0 @@ -comment { vpe_phase2 configuration } - -comment { local client facing interface on vlan 100 } -comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } - -set int ip table GigabitEthernet2/2/0 1 -set int ip address GigabitEthernet2/2/0 6.0.2.1/24 -set int state GigabitEthernet2/2/0 up - -comment { tunnel to ludd-cluster-3 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.1/24 -set int state GigabitEthernet2/3/0 up - -mpls encap add label 30 fib 1 dest 6.0.3.3 -mpls decap add label 30 fib 1 - -create mpls gre tunnel src 6.0.3.1 dst 6.0.3.3 intfc 6.0.4.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-nsh.conf b/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-nsh.conf deleted file mode 100644 index 47c1d263ce1..00000000000 --- a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-nsh.conf +++ /dev/null @@ -1,18 +0,0 @@ -comment { vpe_phase2 configuration } - -comment { local client facing interface on vlan 100 } -comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } - -set int ip address GigabitEthernet2/2/0 6.0.2.1/24 -set int state GigabitEthernet2/2/0 up - -comment { tunnel to ludd-cluster-3 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.1/24 -set int state GigabitEthernet2/3/0 up - -nsh gre tunnel src 6.0.3.1 dst 6.0.3.3 c1 1 c2 2 c3 3 c4 4 spi 1133 si 0 next-ip4 -set int ip address nsh_gre_tunnel0 6.0.4.1/24 -set int state nsh_gre_tunnel0 up - -nsh gre tunnel src 6.0.3.3 dst 6.0.3.1 c1 1 c2 2 c3 3 c4 4 spi 3311 si 0 next-ip4 -set int stat nsh_gre_tunnel1 up diff --git a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-sr.conf b/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-sr.conf deleted file mode 100644 index 7cb612cb1e7..00000000000 --- a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-sr.conf +++ /dev/null @@ -1,24 +0,0 @@ -comment { test sr segment chunk-offset on } -test sr hmac validate on - -comment { trunk to ludd-cluster-3 } -set int ip address GigabitEthernet2/3/0 db03::2/64 -enable ip6 interface GigabitEthernet2/3/0 -set int state GigabitEthernet2/3/0 up - -comment { subscriber ludd-cluster-2 } -set int ip address GigabitEthernet2/2/0 db02::2/64 -enable ip6 interface GigabitEthernet2/2/0 -set int state GigabitEthernet2/2/0 up - -sr hmac id 2 key Gozzer -sr hmac id 3 key Hoser - -sr tunnel src db01::1 dst db04::1/128 next db03::1 next db04::1 tag db02::2 clean key Gozzer InPE 1 - -tap connect srlocal hwaddr random -set int ip6 table tap-0 1 -set int ip address tap-0 db04::99/64 -enable ip6 interface tap-0 -set int state tap-0 up -ip route add table 1 db02::0/64 lookup in table 0 diff --git a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-vxlan.conf b/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-vxlan.conf deleted file mode 100644 index 0688d40b564..00000000000 --- a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-vxlan.conf +++ /dev/null @@ -1,17 +0,0 @@ -comment { tunnel to ludd-cluster-3 6.0.3.3 on vlan 101 } - -set int ip address GigabitEthernet2/3/0 6.0.3.1/24 -set int state GigabitEthernet2/3/0 up - -comment { tunnel to ludd-cluster-5 6.0.5.5 on vlan 105 } -set int ip address GigabitEthernet2/7/0 6.0.5.1/24 -set int state GigabitEthernet2/7/0 up - -comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } - -set int ip address GigabitEthernet2/2/0 6.0.2.1/24 -set int state GigabitEthernet2/2/0 up - -vxlan tunnel src 6.0.3.1 peer 6.0.3.3 peer 6.0.3.5 vni 123 -vxlan l2 GigabitEthernet2/2/0 vni 123 - diff --git a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-vxnsh.conf b/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-vxnsh.conf deleted file mode 100644 index 1457ba21247..00000000000 --- a/vnet/etc/scripts/ludd-cluster-1/ludd-cluster-1-vxnsh.conf +++ /dev/null @@ -1,18 +0,0 @@ -comment { vpe_phase2 configuration } - -comment { local client facing interface on vlan 100 } -comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } - -set int ip address GigabitEthernet2/2/0 6.0.2.1/24 -set int state GigabitEthernet2/2/0 up - -comment { tunnel to ludd-cluster-3 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.1/24 -set int state GigabitEthernet2/3/0 up - -nsh vxlan tunnel src 6.0.3.1 dst 6.0.3.3 c1 1 c2 2 c3 3 c4 4 vni 11 spi 1133 si 0 next-ip4 -set int ip address nsh_vxlan_gpe_tunnel0 6.0.4.1/24 -set int state nsh_vxlan_gpe_tunnel0 up - -nsh vxlan tunnel src 6.0.3.3 dst 6.0.3.1 c1 1 c2 2 c3 3 c4 4 vni 33 spi 3311 si 0 next-ip4 -set int stat nsh_vxlan_gpe_tunnel1 up diff --git a/vnet/etc/scripts/ludd-cluster-3/lc3.script b/vnet/etc/scripts/ludd-cluster-3/lc3.script deleted file mode 100644 index 153988cefad..00000000000 --- a/vnet/etc/scripts/ludd-cluster-3/lc3.script +++ /dev/null @@ -1,9 +0,0 @@ -l2tp_set_lookup_key lookup_v6_src - -sw_interface_add_del_address GigabitEthernet2/3/0 db03::1/64 -sw_interface_set_flags GigabitEthernet2/3/0 admin-up - -comment sw_interface_add_del_address GigabitEthernet2/4/0 db02::2/64 -sw_interface_set_flags GigabitEthernet2/4/0 admin-up - -l2tp_session_add_del client_address db03::2 our_address db03::1 GigabitEthernet2/4/0 local_session_id 3 remote_session_id 1 local_cookie 33 remote_cookie 11 diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-ioam.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-ioam.conf deleted file mode 100644 index 88b5ab2c389..00000000000 --- a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-ioam.conf +++ /dev/null @@ -1,14 +0,0 @@ -comment { connects to ludd-cluster-4 eth3 addr db04::4/64 } -set int ip address GigabitEthernet2/4/0 db04::1/64 -set int state GigabitEthernet2/4/0 up - -comment { connects to ioam domain ludd-cluster-1 addr db03::1/64 } -set int ip address GigabitEthernet2/3/0 db03::3/64 -set int state GigabitEthernet2/3/0 up - -set ip6 neighbor GigabitEthernet2/3/0 db03::1 00:50:56:b7:05:bf -set ip6 neighbor GigabitEthernet2/4/0 db04::4 00:50:56:b7:05:d2 - -ip route add db02::0/64 via db03::1 - -ioam set destination db04::4/128 pop diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-l3vxlan.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-l3vxlan.conf deleted file mode 100644 index 94357d7de9e..00000000000 --- a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-l3vxlan.conf +++ /dev/null @@ -1,12 +0,0 @@ -comment { local client facing interface on vlan 102 } - -comment { configure client lc4 eth1 } -set int ip address GigabitEthernet2/4/0 6.0.4.1/24 -set int state GigabitEthernet2/4/0 up - -comment { tunnel to ludd-cluster-1 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -vxlan tunnel src 6.0.3.3 peer 6.0.3.1 vni 123 adj 6.0.2.0/24 - diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-lisp.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-lisp.conf deleted file mode 100644 index faab4bf7758..00000000000 --- a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-lisp.conf +++ /dev/null @@ -1,16 +0,0 @@ -comment { local client facing interface on vlan 102 } -comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } - -set int ip address GigabitEthernet2/4/0 6.0.4.1/24 -set int state GigabitEthernet2/4/0 up - -comment { tunnel to ludd-cluster-1 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -lisp gpe tunnel src 6.0.3.3 dst 6.0.3.1 next-ip4 decap-next ip4 iid 3311 -set int ip address lisp_gpe_tunnel0 6.0.2.3/24 -set int state lisp_gpe_tunnel0 up - -lisp gpe tunnel src 6.0.3.1 dst 6.0.3.3 next-ip4 decap-next ip4 iid 1133 -set int state lisp_gpe_tunnel1 up diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-mpls-l2.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-mpls-l2.conf deleted file mode 100644 index 2d94b2bf58c..00000000000 --- a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-mpls-l2.conf +++ /dev/null @@ -1,24 +0,0 @@ -comment { vpe_phase1d configuration } - -comment { local client facing interface on vlan 102 } -comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } - -set int ip table GigabitEthernet2/4/0 1 -set int ip address GigabitEthernet2/4/0 6.0.4.1/24 -set int state GigabitEthernet2/4/0 up - -comment { tunnel to ludd-cluster-1 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -mpls encap add label 30 fib 1 dest 6.0.3.1 -mpls decap add label 30 next output GigabitEthernet2/4/0 - -comment { create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0 l2-only } - -comment {set int l2 xconnect GigabitEthernet2/4/0 mpls-gre0 } - -uncomment { create mpls ethernet tunnel dst 00:50:56:b7:05:bf adj 6.0.3.1/8 l2-only tx-intfc GigabitEthernet2/3/0 fib-id 1 } - -uncomment { set int l2 xconnect GigabitEthernet2/4/0 mpls-eth0 } - diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-mpls.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-mpls.conf deleted file mode 100644 index ea8b75f765a..00000000000 --- a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-mpls.conf +++ /dev/null @@ -1,17 +0,0 @@ -comment { vpe_phase1d configuration } - -comment { local client facing interface on vlan 102 } -comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } - -set int ip table GigabitEthernet2/4/0 1 -set int ip address GigabitEthernet2/4/0 6.0.4.1/24 -set int state GigabitEthernet2/4/0 up - -comment { tunnel to ludd-cluster-1 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -mpls encap add label 30 fib 1 dest 6.0.3.1 -mpls decap add label 30 fib 1 - -create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-nsh.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-nsh.conf deleted file mode 100644 index 7a67b9af064..00000000000 --- a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-nsh.conf +++ /dev/null @@ -1,19 +0,0 @@ -comment { vpe_phase1d configuration } - -comment { local client facing interface on vlan 102 } -comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } - -set int ip address GigabitEthernet2/4/0 6.0.4.1/24 -set int state GigabitEthernet2/4/0 up - -comment { tunnel to ludd-cluster-1 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -nsh gre tunnel src 6.0.3.3 dst 6.0.3.1 c1 1 c2 2 c3 3 c4 4 spi 3311 si 0 next-ip4 -set int ip address nsh_gre_tunnel0 6.0.2.3/24 -set int state nsh_gre_tunnel0 up - -nsh gre tunnel src 6.0.3.1 dst 6.0.3.3 c1 1 c2 2 c3 3 c4 4 spi 1133 si 0 next-ip4 -set int state nsh_gre_tunnel1 up - diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-sr.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-sr.conf deleted file mode 100644 index d9cf57625cf..00000000000 --- a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-sr.conf +++ /dev/null @@ -1,28 +0,0 @@ -comment { test sr segment chunk-offset on } -test sr hmac validate on - -comment { trunk to ludd-cluster-1 } -set int ip address GigabitEthernet2/3/0 db03::1/64 -enable ip6 interface GigabitEthernet2/3/0 -set int state GigabitEthernet2/3/0 up - -comment { subscriber ludd-cluster-4 } -set int ip address GigabitEthernet2/4/0 db04::2/64 - -comment { next address to fake out ND on shared LAN segment } -comment { set int ip address GigabitEthernet2/4/0 db02::13/64 } - -enable ip6 interface GigabitEthernet2/4/0 -set int state GigabitEthernet2/4/0 up - -sr hmac id 2 key Gozzer -sr hmac id 3 key Hoser - -sr tunnel src db04::1 dst db02::1/128 next db03::2 next db02::1 tag db04::2 clean key Hoser - -tap connect srlocal hwaddr random -set int ip6 table tap-0 1 -set int ip address tap-0 db04::99/64 -enable ip6 interface tap-0 -set int state tap-0 up -ip route add table 1 db02::0/64 lookup in table 0 diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-vxlan.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-vxlan.conf deleted file mode 100644 index 3caa65fe7b1..00000000000 --- a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-vxlan.conf +++ /dev/null @@ -1,16 +0,0 @@ - -comment { local client facing interface on vlan 102 } - -comment { configure client lc4 eth1 } -set int state GigabitEthernet2/4/0 up - -comment { tunnel to ludd-cluster-1 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -comment { tunnel to ludd-cluster-5 on vlan 105 } -set int ip address GigabitEthernet2/7/0 6.0.5.3/24 -set int state GigabitEthernet2/3/0 up - -vxlan tunnel src 6.0.3.3 peer 6.0.3.1 peer 6.0.3.5 vni 123 -vxlan l2 GigabitEthernet2/4/0 vni 123 diff --git a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-vxnsh.conf b/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-vxnsh.conf deleted file mode 100644 index 628b56653a9..00000000000 --- a/vnet/etc/scripts/ludd-cluster-3/ludd-cluster-3-vxnsh.conf +++ /dev/null @@ -1,18 +0,0 @@ -comment { vpe_phase1d configuration } - -comment { local client facing interface on vlan 102 } -comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } - -set int ip address GigabitEthernet2/4/0 6.0.4.1/24 -set int state GigabitEthernet2/4/0 up - -comment { tunnel to ludd-cluster-1 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -nsh vxlan tunnel src 6.0.3.3 dst 6.0.3.1 c1 1 c2 2 c3 3 c4 4 vni 33 spi 3311 si 0 next-ip4 -set int ip address nsh_vxlan_gpe_tunnel0 6.0.2.3/24 -set int state nsh_vxlan_gpe_tunnel0 up - -nsh vxlan tunnel src 6.0.3.1 dst 6.0.3.3 c1 1 c2 2 c3 3 c4 4 vni 11 spi 1133 si 0 next-ip4 -set int state nsh_vxlan_gpe_tunnel1 up diff --git a/vnet/etc/scripts/mpls-o-ethernet/leftpeer.conf b/vnet/etc/scripts/mpls-o-ethernet/leftpeer.conf new file mode 100644 index 00000000000..dd37b942062 --- /dev/null +++ b/vnet/etc/scripts/mpls-o-ethernet/leftpeer.conf @@ -0,0 +1,17 @@ +comment { vpe_phase2 configuration } + +comment { local client facing interface } +comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } + +set int ip table GigabitEthernet2/2/0 1 +set int ip address GigabitEthernet2/2/0 6.0.2.1/24 +set int state GigabitEthernet2/2/0 up + +comment { tunnel to rightpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.1/24 +set int state GigabitEthernet2/3/0 up + +mpls encap add label 30 fib 1 dest 6.0.4.1 +mpls decap add label 30 fib 1 + +create mpls ethernet tunnel dst 00:50:56:b7:05:cb adj 6.0.4.1/24 tx-intfc GigabitEthernet2/3/0 fib-id 1 diff --git a/vnet/etc/scripts/mpls-o-ethernet/ludd-cluster-1.conf b/vnet/etc/scripts/mpls-o-ethernet/ludd-cluster-1.conf deleted file mode 100644 index e439ccb0fdf..00000000000 --- a/vnet/etc/scripts/mpls-o-ethernet/ludd-cluster-1.conf +++ /dev/null @@ -1,17 +0,0 @@ -comment { vpe_phase2 configuration } - -comment { local client facing interface on vlan 100 } -comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } - -set int ip table GigabitEthernet2/2/0 1 -set int ip address GigabitEthernet2/2/0 6.0.2.1/24 -set int state GigabitEthernet2/2/0 up - -comment { tunnel to ludd-cluster-3 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.1/24 -set int state GigabitEthernet2/3/0 up - -mpls encap add label 30 fib 1 dest 6.0.4.1 -mpls decap add label 30 fib 1 - -create mpls ethernet tunnel dst 00:50:56:b7:05:cb adj 6.0.4.1/24 tx-intfc GigabitEthernet2/3/0 fib-id 1 diff --git a/vnet/etc/scripts/mpls-o-ethernet/ludd-cluster-3.conf b/vnet/etc/scripts/mpls-o-ethernet/ludd-cluster-3.conf deleted file mode 100644 index 3d71647c1d2..00000000000 --- a/vnet/etc/scripts/mpls-o-ethernet/ludd-cluster-3.conf +++ /dev/null @@ -1,17 +0,0 @@ -comment { vpe_phase1d configuration } - -comment { local client facing interface on vlan 102 } -comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } - -set int ip table GigabitEthernet2/4/0 1 -set int ip address GigabitEthernet2/4/0 6.0.4.1/24 -set int state GigabitEthernet2/4/0 up - -comment { tunnel to ludd-cluster-1 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -mpls encap add label 30 fib 1 dest 6.0.2.1 -mpls decap add label 30 fib 1 - -create mpls ethernet tunnel dst 00:50:56:b7:05:bf adj 6.0.2.1/24 tx-intfc GigabitEthernet2/3/0 fib-id 1 diff --git a/vnet/etc/scripts/mpls-o-ethernet/rightpeer.conf b/vnet/etc/scripts/mpls-o-ethernet/rightpeer.conf new file mode 100644 index 00000000000..7709ce4d584 --- /dev/null +++ b/vnet/etc/scripts/mpls-o-ethernet/rightpeer.conf @@ -0,0 +1,15 @@ +comment { local client facing interface } +comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } + +set int ip table GigabitEthernet2/4/0 1 +set int ip address GigabitEthernet2/4/0 6.0.4.1/24 +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +mpls encap add label 30 fib 1 dest 6.0.2.1 +mpls decap add label 30 fib 1 + +create mpls ethernet tunnel dst 00:50:56:b7:05:bf adj 6.0.2.1/24 tx-intfc GigabitEthernet2/3/0 fib-id 1 diff --git a/vnet/etc/scripts/mpls-o-gre/dhcpd.conf b/vnet/etc/scripts/mpls-o-gre/dhcpd.conf new file mode 100644 index 00000000000..f0f659cd55f --- /dev/null +++ b/vnet/etc/scripts/mpls-o-gre/dhcpd.conf @@ -0,0 +1,116 @@ +# +# Sample configuration file for ISC dhcpd for Debian +# +# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as +# configuration file instead of this file. +# +# + +# The ddns-updates-style parameter controls whether or not the server will +# attempt to do a DNS update when a lease is confirmed. We default to the +# behavior of the version 2 packages ('none', since DHCP v2 didn't +# have support for DDNS.) +ddns-update-style none; + +# option definitions common to all supported networks... +option domain-name "example.org"; +option domain-name-servers ns1.example.org, ns2.example.org; + +default-lease-time 600; +max-lease-time 7200; + +# If this DHCP server is the official DHCP server for the local +# network, the authoritative directive should be uncommented. +#authoritative; + +# Use this to send dhcp log messages to a different log file (you also +# have to hack syslog.conf to complete the redirection). +log-facility local7; + +# No service will be given on this subnet, but declaring it helps the +# DHCP server to understand the network topology. + +#subnet 10.152.187.0 netmask 255.255.255.0 { +#} + +# This is a very basic subnet declaration. + +#subnet 10.254.239.0 netmask 255.255.255.224 { +# range 10.254.239.10 10.254.239.20; +# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org; +#} + +# This declaration allows BOOTP clients to get dynamic addresses, +# which we don't really recommend. + +#subnet 10.254.239.32 netmask 255.255.255.224 { +# range dynamic-bootp 10.254.239.40 10.254.239.60; +# option broadcast-address 10.254.239.31; +# option routers rtr-239-32-1.example.org; +#} + +# A slightly different configuration for an internal subnet. +#subnet 10.5.5.0 netmask 255.255.255.224 { +# range 10.5.5.26 10.5.5.30; +# option domain-name-servers ns1.internal.example.org; +# option domain-name "internal.example.org"; +# option routers 10.5.5.1; +# option broadcast-address 10.5.5.31; +# default-lease-time 600; +# max-lease-time 7200; +#} + +# Hosts which require special configuration options can be listed in +# host statements. If no address is specified, the address will be +# allocated dynamically (if possible), but the host-specific information +# will still come from the host declaration. + +#host passacaglia { +# hardware ethernet 0:0:c0:5d:bd:95; +# filename "vmunix.passacaglia"; +# server-name "toccata.fugue.com"; +#} + +# Fixed IP addresses can also be specified for hosts. These addresses +# should not also be listed as being available for dynamic assignment. +# Hosts for which fixed IP addresses have been specified can boot using +# BOOTP or DHCP. Hosts for which no fixed address is specified can only +# be booted with DHCP, unless there is an address range on the subnet +# to which a BOOTP client is connected which has the dynamic-bootp flag +# set. +#host fantasia { +# hardware ethernet 08:00:07:26:c0:a5; +# fixed-address fantasia.fugue.com; +#} + +# You can declare a class of clients and then do address allocation +# based on that. The example below shows a case where all clients +# in a certain class get addresses on the 10.17.224/24 subnet, and all +# other clients get addresses on the 10.0.29/24 subnet. + +#class "foo" { +# match if substring (option vendor-class-identifier, 0, 4) = "SUNW"; +#} + +#shared-network 224-29 { +# subnet 10.17.224.0 netmask 255.255.255.0 { +# option routers rtr-224.example.org; +# } +# subnet 10.0.29.0 netmask 255.255.255.0 { +# option routers rtr-29.example.org; +# } +# pool { +# allow members of "foo"; +# range 10.17.224.10 10.17.224.250; +# } +# pool { +# deny members of "foo"; +# range 10.0.29.10 10.0.29.230; +# } +#} +subnet 6.0.0.0 netmask 255.255.0.0 { + range 6.0.2.2 6.0.2.5; + option routers 6.0.2.1; + default-lease-time 15; + max-lease-time 15; +} diff --git a/vnet/etc/scripts/mpls-o-gre/leftpeer.conf b/vnet/etc/scripts/mpls-o-gre/leftpeer.conf new file mode 100644 index 00000000000..149c70c068d --- /dev/null +++ b/vnet/etc/scripts/mpls-o-gre/leftpeer.conf @@ -0,0 +1,14 @@ +comment { left linux ping target configure at e.g. 6.0.2.2/24 } + +set int ip table GigabitEthernet2/2/0 1 +set int ip address GigabitEthernet2/2/0 6.0.2.1/24 +set int state GigabitEthernet2/2/0 up + +comment { tunnel to rightpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.1/24 +set int state GigabitEthernet2/3/0 up + +mpls encap add label 30 fib 1 dest 6.0.3.3 +mpls decap add label 30 fib 1 + +create mpls gre tunnel src 6.0.3.1 dst 6.0.3.3 intfc 6.0.4.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/vnet/etc/scripts/mpls-o-gre/ludd-cluster-1.conf b/vnet/etc/scripts/mpls-o-gre/ludd-cluster-1.conf deleted file mode 100644 index 992a24c428e..00000000000 --- a/vnet/etc/scripts/mpls-o-gre/ludd-cluster-1.conf +++ /dev/null @@ -1,17 +0,0 @@ -comment { vpe_phase2 configuration } - -comment { local client facing interface on vlan 100 } -comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } - -set int ip table GigabitEthernet2/2/0 1 -set int ip address GigabitEthernet2/2/0 6.0.2.1/24 -set int state GigabitEthernet2/2/0 up - -comment { tunnel to ludd-cluster-3 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.1/24 -set int state GigabitEthernet2/3/0 up - -mpls encap add label 30 fib 1 dest 6.0.3.3 -mpls decap add label 30 fib 1 - -create mpls gre tunnel src 6.0.3.1 dst 6.0.3.3 intfc 6.0.4.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/vnet/etc/scripts/mpls-o-gre/ludd-cluster-3.conf b/vnet/etc/scripts/mpls-o-gre/ludd-cluster-3.conf deleted file mode 100644 index ea8b75f765a..00000000000 --- a/vnet/etc/scripts/mpls-o-gre/ludd-cluster-3.conf +++ /dev/null @@ -1,17 +0,0 @@ -comment { vpe_phase1d configuration } - -comment { local client facing interface on vlan 102 } -comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } - -set int ip table GigabitEthernet2/4/0 1 -set int ip address GigabitEthernet2/4/0 6.0.4.1/24 -set int state GigabitEthernet2/4/0 up - -comment { tunnel to ludd-cluster-1 on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -mpls encap add label 30 fib 1 dest 6.0.3.1 -mpls decap add label 30 fib 1 - -create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/vnet/etc/scripts/mpls-o-gre/ludd-cluster-5-dhcpd.conf b/vnet/etc/scripts/mpls-o-gre/ludd-cluster-5-dhcpd.conf deleted file mode 100644 index f0f659cd55f..00000000000 --- a/vnet/etc/scripts/mpls-o-gre/ludd-cluster-5-dhcpd.conf +++ /dev/null @@ -1,116 +0,0 @@ -# -# Sample configuration file for ISC dhcpd for Debian -# -# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as -# configuration file instead of this file. -# -# - -# The ddns-updates-style parameter controls whether or not the server will -# attempt to do a DNS update when a lease is confirmed. We default to the -# behavior of the version 2 packages ('none', since DHCP v2 didn't -# have support for DDNS.) -ddns-update-style none; - -# option definitions common to all supported networks... -option domain-name "example.org"; -option domain-name-servers ns1.example.org, ns2.example.org; - -default-lease-time 600; -max-lease-time 7200; - -# If this DHCP server is the official DHCP server for the local -# network, the authoritative directive should be uncommented. -#authoritative; - -# Use this to send dhcp log messages to a different log file (you also -# have to hack syslog.conf to complete the redirection). -log-facility local7; - -# No service will be given on this subnet, but declaring it helps the -# DHCP server to understand the network topology. - -#subnet 10.152.187.0 netmask 255.255.255.0 { -#} - -# This is a very basic subnet declaration. - -#subnet 10.254.239.0 netmask 255.255.255.224 { -# range 10.254.239.10 10.254.239.20; -# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org; -#} - -# This declaration allows BOOTP clients to get dynamic addresses, -# which we don't really recommend. - -#subnet 10.254.239.32 netmask 255.255.255.224 { -# range dynamic-bootp 10.254.239.40 10.254.239.60; -# option broadcast-address 10.254.239.31; -# option routers rtr-239-32-1.example.org; -#} - -# A slightly different configuration for an internal subnet. -#subnet 10.5.5.0 netmask 255.255.255.224 { -# range 10.5.5.26 10.5.5.30; -# option domain-name-servers ns1.internal.example.org; -# option domain-name "internal.example.org"; -# option routers 10.5.5.1; -# option broadcast-address 10.5.5.31; -# default-lease-time 600; -# max-lease-time 7200; -#} - -# Hosts which require special configuration options can be listed in -# host statements. If no address is specified, the address will be -# allocated dynamically (if possible), but the host-specific information -# will still come from the host declaration. - -#host passacaglia { -# hardware ethernet 0:0:c0:5d:bd:95; -# filename "vmunix.passacaglia"; -# server-name "toccata.fugue.com"; -#} - -# Fixed IP addresses can also be specified for hosts. These addresses -# should not also be listed as being available for dynamic assignment. -# Hosts for which fixed IP addresses have been specified can boot using -# BOOTP or DHCP. Hosts for which no fixed address is specified can only -# be booted with DHCP, unless there is an address range on the subnet -# to which a BOOTP client is connected which has the dynamic-bootp flag -# set. -#host fantasia { -# hardware ethernet 08:00:07:26:c0:a5; -# fixed-address fantasia.fugue.com; -#} - -# You can declare a class of clients and then do address allocation -# based on that. The example below shows a case where all clients -# in a certain class get addresses on the 10.17.224/24 subnet, and all -# other clients get addresses on the 10.0.29/24 subnet. - -#class "foo" { -# match if substring (option vendor-class-identifier, 0, 4) = "SUNW"; -#} - -#shared-network 224-29 { -# subnet 10.17.224.0 netmask 255.255.255.0 { -# option routers rtr-224.example.org; -# } -# subnet 10.0.29.0 netmask 255.255.255.0 { -# option routers rtr-29.example.org; -# } -# pool { -# allow members of "foo"; -# range 10.17.224.10 10.17.224.250; -# } -# pool { -# deny members of "foo"; -# range 10.0.29.10 10.0.29.230; -# } -#} -subnet 6.0.0.0 netmask 255.255.0.0 { - range 6.0.2.2 6.0.2.5; - option routers 6.0.2.1; - default-lease-time 15; - max-lease-time 15; -} diff --git a/vnet/etc/scripts/mpls-o-gre/rightpeer.conf b/vnet/etc/scripts/mpls-o-gre/rightpeer.conf new file mode 100644 index 00000000000..b5bb597db49 --- /dev/null +++ b/vnet/etc/scripts/mpls-o-gre/rightpeer.conf @@ -0,0 +1,14 @@ +comment { right linux ping target configure e.g. 6.0.4.4/24 } + +set int ip table GigabitEthernet2/4/0 1 +set int ip address GigabitEthernet2/4/0 6.0.4.1/24 +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +mpls encap add label 30 fib 1 dest 6.0.3.1 +mpls decap add label 30 fib 1 + +create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/vnet/etc/scripts/rightpeer/rightpeer-ioam.conf b/vnet/etc/scripts/rightpeer/rightpeer-ioam.conf new file mode 100644 index 00000000000..3e9a8d343e2 --- /dev/null +++ b/vnet/etc/scripts/rightpeer/rightpeer-ioam.conf @@ -0,0 +1,14 @@ +comment { connects to right ping target eth3 addr db04::4/64 } +set int ip address GigabitEthernet2/4/0 db04::1/64 +set int state GigabitEthernet2/4/0 up + +comment { connects to ioam domain leftpeer addr db03::1/64 } +set int ip address GigabitEthernet2/3/0 db03::3/64 +set int state GigabitEthernet2/3/0 up + +set ip6 neighbor GigabitEthernet2/3/0 db03::1 00:50:56:b7:05:bf +set ip6 neighbor GigabitEthernet2/4/0 db04::4 00:50:56:b7:05:d2 + +ip route add db02::0/64 via db03::1 + +ioam set destination db04::4/128 pop diff --git a/vnet/etc/scripts/rightpeer/rightpeer-l3vxlan.conf b/vnet/etc/scripts/rightpeer/rightpeer-l3vxlan.conf new file mode 100644 index 00000000000..abba1ab0ef6 --- /dev/null +++ b/vnet/etc/scripts/rightpeer/rightpeer-l3vxlan.conf @@ -0,0 +1,9 @@ +set int ip address GigabitEthernet2/4/0 6.0.4.1/24 +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer on vlan 101 } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +vxlan tunnel src 6.0.3.3 peer 6.0.3.1 vni 123 adj 6.0.2.0/24 + diff --git a/vnet/etc/scripts/rightpeer/rightpeer-lisp.conf b/vnet/etc/scripts/rightpeer/rightpeer-lisp.conf new file mode 100644 index 00000000000..961204a346b --- /dev/null +++ b/vnet/etc/scripts/rightpeer/rightpeer-lisp.conf @@ -0,0 +1,16 @@ +comment { local client facing interface } +comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } + +set int ip address GigabitEthernet2/4/0 6.0.4.1/24 +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +lisp gpe tunnel src 6.0.3.3 dst 6.0.3.1 next-ip4 decap-next ip4 iid 3311 +set int ip address lisp_gpe_tunnel0 6.0.2.3/24 +set int state lisp_gpe_tunnel0 up + +lisp gpe tunnel src 6.0.3.1 dst 6.0.3.3 next-ip4 decap-next ip4 iid 1133 +set int state lisp_gpe_tunnel1 up diff --git a/vnet/etc/scripts/rightpeer/rightpeer-mpls-l2.conf b/vnet/etc/scripts/rightpeer/rightpeer-mpls-l2.conf new file mode 100644 index 00000000000..0ce38583e83 --- /dev/null +++ b/vnet/etc/scripts/rightpeer/rightpeer-mpls-l2.conf @@ -0,0 +1,24 @@ +comment { vpe_phase1d configuration } + +comment { local client facing interface } +comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } + +set int ip table GigabitEthernet2/4/0 1 +set int ip address GigabitEthernet2/4/0 6.0.4.1/24 +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +mpls encap add label 30 fib 1 dest 6.0.3.1 +mpls decap add label 30 next output GigabitEthernet2/4/0 + +comment { create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0 l2-only } + +comment {set int l2 xconnect GigabitEthernet2/4/0 mpls-gre0 } + +uncomment { create mpls ethernet tunnel dst 00:50:56:b7:05:bf adj 6.0.3.1/8 l2-only tx-intfc GigabitEthernet2/3/0 fib-id 1 } + +uncomment { set int l2 xconnect GigabitEthernet2/4/0 mpls-eth0 } + diff --git a/vnet/etc/scripts/rightpeer/rightpeer-mpls.conf b/vnet/etc/scripts/rightpeer/rightpeer-mpls.conf new file mode 100644 index 00000000000..fc97ba16332 --- /dev/null +++ b/vnet/etc/scripts/rightpeer/rightpeer-mpls.conf @@ -0,0 +1,17 @@ +comment { vpe_phase1d configuration } + +comment { local client facing interface } +comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } + +set int ip table GigabitEthernet2/4/0 1 +set int ip address GigabitEthernet2/4/0 6.0.4.1/24 +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +mpls encap add label 30 fib 1 dest 6.0.3.1 +mpls decap add label 30 fib 1 + +create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/vnet/etc/scripts/rightpeer/rightpeer-nsh.conf b/vnet/etc/scripts/rightpeer/rightpeer-nsh.conf new file mode 100644 index 00000000000..76c1203b44c --- /dev/null +++ b/vnet/etc/scripts/rightpeer/rightpeer-nsh.conf @@ -0,0 +1,19 @@ +comment { vpe_phase1d configuration } + +comment { local client facing interface } +comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } + +set int ip address GigabitEthernet2/4/0 6.0.4.1/24 +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +nsh gre tunnel src 6.0.3.3 dst 6.0.3.1 c1 1 c2 2 c3 3 c4 4 spi 3311 si 0 next-ip4 +set int ip address nsh_gre_tunnel0 6.0.2.3/24 +set int state nsh_gre_tunnel0 up + +nsh gre tunnel src 6.0.3.1 dst 6.0.3.3 c1 1 c2 2 c3 3 c4 4 spi 1133 si 0 next-ip4 +set int state nsh_gre_tunnel1 up + diff --git a/vnet/etc/scripts/rightpeer/rightpeer-sr.conf b/vnet/etc/scripts/rightpeer/rightpeer-sr.conf new file mode 100644 index 00000000000..0b2a98bba1b --- /dev/null +++ b/vnet/etc/scripts/rightpeer/rightpeer-sr.conf @@ -0,0 +1,28 @@ +comment { test sr segment chunk-offset on } +test sr hmac validate on + +comment { trunk to leftpeer } +set int ip address GigabitEthernet2/3/0 db03::1/64 +enable ip6 interface GigabitEthernet2/3/0 +set int state GigabitEthernet2/3/0 up + +comment { subscriber right peer target } +set int ip address GigabitEthernet2/4/0 db04::2/64 + +comment { next address to fake out ND on shared LAN segment } +comment { set int ip address GigabitEthernet2/4/0 db02::13/64 } + +enable ip6 interface GigabitEthernet2/4/0 +set int state GigabitEthernet2/4/0 up + +sr hmac id 2 key Gozzer +sr hmac id 3 key Hoser + +sr tunnel src db04::1 dst db02::1/128 next db03::2 next db02::1 tag db04::2 clean key Hoser + +tap connect srlocal hwaddr random +set int ip6 table tap-0 1 +set int ip address tap-0 db04::99/64 +enable ip6 interface tap-0 +set int state tap-0 up +ip route add table 1 db02::0/64 lookup in table 0 diff --git a/vnet/etc/scripts/rightpeer/rightpeer-vxlan.conf b/vnet/etc/scripts/rightpeer/rightpeer-vxlan.conf new file mode 100644 index 00000000000..bd4c427e768 --- /dev/null +++ b/vnet/etc/scripts/rightpeer/rightpeer-vxlan.conf @@ -0,0 +1,16 @@ + +comment { local client facing interface } + +comment { configure client lc4 eth1 } +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +comment { tunnel to extra ping target } +set int ip address GigabitEthernet2/7/0 6.0.5.3/24 +set int state GigabitEthernet2/3/0 up + +vxlan tunnel src 6.0.3.3 peer 6.0.3.1 peer 6.0.3.5 vni 123 +vxlan l2 GigabitEthernet2/4/0 vni 123 diff --git a/vnet/etc/scripts/rightpeer/rightpeer-vxnsh.conf b/vnet/etc/scripts/rightpeer/rightpeer-vxnsh.conf new file mode 100644 index 00000000000..45b0b7ef7c4 --- /dev/null +++ b/vnet/etc/scripts/rightpeer/rightpeer-vxnsh.conf @@ -0,0 +1,18 @@ +comment { vpe_phase1d configuration } + +comment { local client facing interface } +comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } + +set int ip address GigabitEthernet2/4/0 6.0.4.1/24 +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +nsh vxlan tunnel src 6.0.3.3 dst 6.0.3.1 c1 1 c2 2 c3 3 c4 4 vni 33 spi 3311 si 0 next-ip4 +set int ip address nsh_vxlan_gpe_tunnel0 6.0.2.3/24 +set int state nsh_vxlan_gpe_tunnel0 up + +nsh vxlan tunnel src 6.0.3.1 dst 6.0.3.3 c1 1 c2 2 c3 3 c4 4 vni 11 spi 1133 si 0 next-ip4 +set int state nsh_vxlan_gpe_tunnel1 up diff --git a/vnet/etc/scripts/rightpeer/rightpeer.script b/vnet/etc/scripts/rightpeer/rightpeer.script new file mode 100644 index 00000000000..153988cefad --- /dev/null +++ b/vnet/etc/scripts/rightpeer/rightpeer.script @@ -0,0 +1,9 @@ +l2tp_set_lookup_key lookup_v6_src + +sw_interface_add_del_address GigabitEthernet2/3/0 db03::1/64 +sw_interface_set_flags GigabitEthernet2/3/0 admin-up + +comment sw_interface_add_del_address GigabitEthernet2/4/0 db02::2/64 +sw_interface_set_flags GigabitEthernet2/4/0 admin-up + +l2tp_session_add_del client_address db03::2 our_address db03::1 GigabitEthernet2/4/0 local_session_id 3 remote_session_id 1 local_cookie 33 remote_cookie 11 diff --git a/vnet/etc/scripts/sr/left-linux-ping.sh b/vnet/etc/scripts/sr/left-linux-ping.sh new file mode 100755 index 00000000000..55b835063c7 --- /dev/null +++ b/vnet/etc/scripts/sr/left-linux-ping.sh @@ -0,0 +1,3 @@ +#!/bin/bash +ifconfig eth2 inet6 add db02::1/64 +route -A inet6 add db04::1/128 gw db02::2 diff --git a/vnet/etc/scripts/sr/leftpeer.conf b/vnet/etc/scripts/sr/leftpeer.conf new file mode 100644 index 00000000000..9591d968b8b --- /dev/null +++ b/vnet/etc/scripts/sr/leftpeer.conf @@ -0,0 +1,27 @@ +comment { test sr segment chunk-offset on } +test sr hmac validate on + +comment { trunk to rightpeer } +set int ip address GigabitEthernet2/3/0 db03::2/64 +enable ip6 interface GigabitEthernet2/3/0 +set int state GigabitEthernet2/3/0 up + +comment { subscriber left-linux-ping } +set int ip address GigabitEthernet2/2/0 db02::2/64 +enable ip6 interface GigabitEthernet2/2/0 +set int state GigabitEthernet2/2/0 up + +sr hmac id 2 key Gozzer +sr hmac id 3 key Hoser + +sr tunnel src db01::1 dst db04::1/128 next db03::1 next db04::1 tag db02::2 clean key Gozzer InPE 1 + +comment { sr unaware service chaining to db03::5 } +comment { sr tunnel src db01::1 dst db04::1/128 next db03::1 next db03::5 next db04::1 tag db02::2 clean key Gozzer InPE 1 } + +comment { tap connect srlocal hwaddr random } +comment { set int ip6 table tap-0 1 } +comment { set int ip address tap-0 db04::99/64 } +comment { enable ip6 interface tap-0 } +comment { set int state tap-0 up } +comment { ip route add table 1 db02::0/64 lookup in table 0 } diff --git a/vnet/etc/scripts/sr/ludd-cluster-1.conf b/vnet/etc/scripts/sr/ludd-cluster-1.conf deleted file mode 100644 index f257b1bc521..00000000000 --- a/vnet/etc/scripts/sr/ludd-cluster-1.conf +++ /dev/null @@ -1,27 +0,0 @@ -comment { test sr segment chunk-offset on } -test sr hmac validate on - -comment { trunk to ludd-cluster-3 } -set int ip address GigabitEthernet2/3/0 db03::2/64 -enable ip6 interface GigabitEthernet2/3/0 -set int state GigabitEthernet2/3/0 up - -comment { subscriber ludd-cluster-2 } -set int ip address GigabitEthernet2/2/0 db02::2/64 -enable ip6 interface GigabitEthernet2/2/0 -set int state GigabitEthernet2/2/0 up - -sr hmac id 2 key Gozzer -sr hmac id 3 key Hoser - -sr tunnel src db01::1 dst db04::1/128 next db03::1 next db04::1 tag db02::2 clean key Gozzer InPE 1 - -comment { sr unaware service chaining to db03::5 } -comment { sr tunnel src db01::1 dst db04::1/128 next db03::1 next db03::5 next db04::1 tag db02::2 clean key Gozzer InPE 1 } - -comment { tap connect srlocal hwaddr random } -comment { set int ip6 table tap-0 1 } -comment { set int ip address tap-0 db04::99/64 } -comment { enable ip6 interface tap-0 } -comment { set int state tap-0 up } -comment { ip route add table 1 db02::0/64 lookup in table 0 } diff --git a/vnet/etc/scripts/sr/ludd-cluster-2.sh b/vnet/etc/scripts/sr/ludd-cluster-2.sh deleted file mode 100755 index 55b835063c7..00000000000 --- a/vnet/etc/scripts/sr/ludd-cluster-2.sh +++ /dev/null @@ -1,3 +0,0 @@ -#!/bin/bash -ifconfig eth2 inet6 add db02::1/64 -route -A inet6 add db04::1/128 gw db02::2 diff --git a/vnet/etc/scripts/sr/ludd-cluster-3.conf b/vnet/etc/scripts/sr/ludd-cluster-3.conf deleted file mode 100644 index 005bee6e3e4..00000000000 --- a/vnet/etc/scripts/sr/ludd-cluster-3.conf +++ /dev/null @@ -1,22 +0,0 @@ -comment { trunk to ludd-cluster-1 } -set int ip address GigabitEthernet2/0/0 db03::1/64 -enable ip6 interface GigabitEthernet2/0/0 -set int state GigabitEthernet2/0/0 up - -comment { subscriber ludd-cluster-4 } -set int ip address GigabitEthernet2/2/0 db04::2/64 - -comment { next address to fake out ND on shared LAN segment } -set int ip address GigabitEthernet2/2/0 db02::13/64 - -enable ip6 interface GigabitEthernet2/2/0 -set int state GigabitEthernet2/2/0 up - -sr tunnel src db04::1 dst db02::1/128 next db03::2 next db02::1 tag db04::2 clean - -tap connect srlocal hwaddr random -set int ip6 table tap-0 1 -set int ip address tap-0 db04::99/64 -enable ip6 interface tap-0 -set int state tap-0 up -ip route add table 1 db02::0/64 lookup in table 0 diff --git a/vnet/etc/scripts/sr/ludd-cluster-4.sh b/vnet/etc/scripts/sr/ludd-cluster-4.sh deleted file mode 100755 index 029368dbb8b..00000000000 --- a/vnet/etc/scripts/sr/ludd-cluster-4.sh +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/bash - -ifconfig eth1 inet6 add db04::1/64 -route -A inet6 add db02::1/128 gw db04::2 diff --git a/vnet/etc/scripts/sr/right-linux-ping.sh b/vnet/etc/scripts/sr/right-linux-ping.sh new file mode 100755 index 00000000000..029368dbb8b --- /dev/null +++ b/vnet/etc/scripts/sr/right-linux-ping.sh @@ -0,0 +1,4 @@ +#!/bin/bash + +ifconfig eth1 inet6 add db04::1/64 +route -A inet6 add db02::1/128 gw db04::2 diff --git a/vnet/etc/scripts/sr/rightpeer.conf b/vnet/etc/scripts/sr/rightpeer.conf new file mode 100644 index 00000000000..6da7a7afd05 --- /dev/null +++ b/vnet/etc/scripts/sr/rightpeer.conf @@ -0,0 +1,22 @@ +comment { trunk to leftpeer } +set int ip address GigabitEthernet2/0/0 db03::1/64 +enable ip6 interface GigabitEthernet2/0/0 +set int state GigabitEthernet2/0/0 up + +comment { subscriber right-linux-ping } +set int ip address GigabitEthernet2/2/0 db04::2/64 + +comment { next address to fake out ND on shared LAN segment } +set int ip address GigabitEthernet2/2/0 db02::13/64 + +enable ip6 interface GigabitEthernet2/2/0 +set int state GigabitEthernet2/2/0 up + +sr tunnel src db04::1 dst db02::1/128 next db03::2 next db02::1 tag db04::2 clean + +tap connect srlocal hwaddr random +set int ip6 table tap-0 1 +set int ip address tap-0 db04::99/64 +enable ip6 interface tap-0 +set int state tap-0 up +ip route add table 1 db02::0/64 lookup in table 0 -- cgit 1.2.3-korg