.. _cmdreference: Useful Debug CLI ================== This is a reference guide for the vpp debug commands that are referenced within these documents. This is **NOT** a complete list. For a complete list refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_. The debug CLI can be executed from a su (superuser) shell using the vppctl command. .. code-block:: console # sudo bash # vppctl show interface Name Idx State Counter Count TenGigabitEthernet86/0/0 1 up rx packets 6569213 rx bytes 9928352943 tx packets 50384 tx bytes 3329279 TenGigabitEthernet86/0/1 2 down VirtualEthernet0/0/0 3 up rx packets 50384 rx bytes 3329279 tx packets 6569213 tx bytes 9928352943 drops 1498 local0 0 down Commands can also be executed from the vppctl shell. .. code-block:: console # vppctl vpp# show interface Name Idx State Counter Count TenGigabitEthernet86/0/0 1 up rx packets 6569213 rx bytes 9928352943 tx packets 50384 tx bytes 3329279 TenGigabitEthernet86/0/1 2 down VirtualEthernet0/0/0 3 up rx packets 50384 rx bytes 3329279 tx packets 6569213 tx bytes 9928352943 drops 1498 local0 0 down .. toctree:: :maxdepth: 3 interface/index.rst ip/index.rst show/index.rst trace/index.rst vhost/index.rst