How to do VPP Packet Tracing in Kubernetes
==========================================

This document describes the steps to do *manual* packet tracing
(capture) using VPP in Kubernetes. Contiv/VPP also ships with a simple
bash script
`vpptrace.sh <https://github.com/contiv/vpp/blob/master/scripts/vpptrace.sh>`__,
which allows to *continuously* trace and *filter* packets incoming
through a given set of interface types. Documentation for vpptrace.sh is
available
`here <https://github.com/contiv/vpp/blob/master/docs/VPPTRACE.md>`__.

More information about VPP packet tracing is in:

-  https://wiki.fd.io/view/VPP/Command-line_Interface_(CLI)_Guide#packet_tracer
-  https://wiki.fd.io/view/VPP/How_To_Use_The_Packet_Generator_and_Packet_Tracer
-  https://wiki.fd.io/view/VPP/Tutorial_Routing_and_Switching

SSH into the Node
-----------------

Perform the following commands to SSH into the node:

::

   cd vpp/vagrant/vagrant-scripts/
   vagrant ssh k8s-worker1

Check the VPP Graph Nodes (Input and Output Queues)
---------------------------------------------------

The following content shows what is running on VPP, via the ``show run``
command

::

    vagrant@k8s-worker1:~$ sudo vppctl
        _______    _        _   _____  ___
      __/ __/ _ \  (_)__    | | / / _ \/ _ \
      _/ _// // / / / _ \   | |/ / ___/ ___/
      /_/ /____(_)_/\___/   |___/_/  /_/

    vpp# show run
    Time 1026791.9, average vectors/node 1.12, last 128 main loops 0.00 per node 0.00
      vector rates in 1.6459e-4, out 1.5485e-4, drop 1.3635e-5, punt 0.0000e0
                  Name                 State         Calls          Vectors        Suspends         Clocks       Vectors/Call
    GigabitEthernet0/8/0-output      active                 56              69               0          1.34e3            1.23
    GigabitEthernet0/8/0-tx          active                 54              67               0          8.09e5            1.24
    acl-plugin-fa-cleaner-process  event wait                0               0               1          2.84e4            0.00
    admin-up-down-process          event wait                0               0               1          4.59e3            0.00
    api-rx-from-ring                any wait                 0               0         3316292          1.24e5            0.00
    arp-input                        active                  3               3               0          2.53e5            1.00
    bfd-process                    event wait                0               0               1          5.94e3            0.00
    cdp-process                     any wait                 0               0          145916          1.36e4            0.00
    dhcp-client-process             any wait                 0               0           10268          3.65e4            0.00
    dns-resolver-process            any wait                 0               0            1027          5.86e4            0.00
    dpdk-input                       polling     8211032318951              93               0         1.48e13            0.00
    dpdk-ipsec-process                done                   1               0               0          2.10e5            0.00
    dpdk-process                    any wait                 0               0          342233          9.86e6            0.00
    error-drop                       active                 12              14               0          6.67e3            1.17
    ethernet-input                   active                 60              74               0          5.81e3            1.23
    fib-walk                        any wait                 0               0          513322          1.59e4            0.00
    flow-report-process             any wait                 0               0               1          1.45e3            0.00
    flowprobe-timer-process         any wait                 0               0               1          6.34e3            0.00
    ikev2-manager-process           any wait                 0               0         1026484          1.18e4            0.00
    interface-output                 active                  2               2               0          3.23e3            1.00
    ioam-export-process             any wait                 0               0               1          1.98e3            0.00
    ip-route-resolver-process       any wait                 0               0           10268          3.02e4            0.00
    ip4-arp                          active                  1               1               0          1.49e4            1.00
    ip4-input                        active                223             248               0          3.39e3            1.11
    ip4-load-balance                 active                106             132               0          5.34e3            1.25
    ip4-local                        active                 86              92               0          2.46e3            1.07
    ip4-local-end-of-arc             active                 86              92               0          1.00e3            1.07
    ip4-lookup                       active                223             248               0          3.31e3            1.11
    ip4-rewrite                      active                190             222               0          1.92e3            1.17
    ip4-udp-lookup                   active                 86              92               0          3.76e3            1.07
    ip6-drop                         active                  6               7               0          2.29e3            1.17
    ip6-icmp-neighbor-discovery-ev  any wait                 0               0         1026484          1.13e4            0.00
    ip6-input                        active                  6               7               0          3.33e3            1.17
    l2-flood                         active                  2               2               0          4.42e3            1.00
    l2-fwd                           active                138             157               0          2.13e3            1.14
    l2-input                         active                140             159               0          2.41e3            1.14
    l2-learn                         active                 86              92               0          3.64e4            1.07
    l2-output                        active                 54              67               0          3.05e3            1.24
    l2fib-mac-age-scanner-process  event wait                0               0              85          5.01e4            0.00
    lisp-retry-service              any wait                 0               0          513322          1.62e4            0.00
    lldp-process                   event wait                0               0               1          5.02e4            0.00
    loop0-output                     active                 54              67               0          1.66e3            1.24
    loop0-tx                         active                 54               0               0          2.49e3            0.00
    memif-process                  event wait                0               0               1          1.70e4            0.00
    nat-det-expire-walk               done                   1               0               0          3.79e3            0.00
    nat44-classify                   active                171             183               0          2.49e3            1.07
    nat44-hairpinning                active                 86              92               0          1.80e3            1.07
    nat44-in2out                     active                171             183               0          4.45e3            1.07
    nat44-in2out-slowpath            active                171             183               0          3.98e3            1.07
    nat44-out2in                     active                 52              65               0          1.28e4            1.25
    nat64-expire-walk               any wait                 0               0          102677          5.95e4            0.00
    nat64-expire-worker-walk      interrupt wa          102676               0               0          7.39e3            0.00
    send-garp-na-process           event wait                0               0               1          1.28e3            0.00
    startup-config-process            done                   1               0               1          4.19e3            0.00
    tapcli-0-output                  active                  1               1               0          6.97e3            1.00
    tapcli-0-tx                      active                  1               1               0          7.32e4            1.00
    tapcli-1-output                  active                 57              63               0          1.66e3            1.11
    tapcli-1-tx                      active                 57              63               0          1.35e5            1.11
    tapcli-2-output                  active                 28              28               0          3.26e3            1.00
    tapcli-2-tx                      active                 28              28               0          4.06e5            1.00
    tapcli-rx                     interrupt wa              62              76               0          6.58e4            1.23
    udp-ping-process                any wait                 0               0               1          1.79e4            0.00
    unix-cli-127.0.0.1:43282         active                  2               0             455         1.26e15            0.00
    unix-epoll-input                 polling        8010763239               0               0          8.17e2            0.00
    vhost-user-process              any wait                 0               0               1          1.96e3            0.00
    vhost-user-send-interrupt-proc  any wait                 0               0               1          3.85e3            0.00
    vpe-link-state-process         event wait                0               0               8          9.79e4            0.00
    vpe-oam-process                 any wait                 0               0          503263          1.21e4            0.00
    vxlan-gpe-ioam-export-process   any wait                 0               0               1          2.91e3            0.00
    vxlan4-encap                     active                 54              67               0          3.55e3            1.24
    vxlan4-input                     active                 86              92               0          3.79e3            1.07
    wildcard-ip4-arp-publisher-pro event wait                0               0               1          6.44e3            0.00

``tapcli-rx`` above is the node-level input queue for incoming packets
into all the pods on the node. There is one ``tapcli-rx`` input queue
for every node.

The following are the input and output queues for each pod and the node:

::

   tapcli-0-output
   tapcli-0-tx
   tapcli-1-output
   tapcli-1-tx
   tapcli-2-output
   tapcli-2-tx

Each pod and node has two queues, one for rx (``tapcli-X-output``), and
one for tx (``tapcli-X-tx``). The above output is with two ``nginx``
pods in kubernetes.

Clear Existing VPP Packet Trace
-------------------------------

Enter the following command:

::

   vpp# clear trace

How to Turn on VPP Packet Tracing
---------------------------------

Enter the following commands:

::

   vpp# trace add <input or output queue name> <number of packets to capture>

   vpp# trace add dpdk-input 1000

   vpp# trace add tapcli-rx 1000

Send Traffic to the Pods
------------------------

Open another terminal, SSH into the master node, refer the documentation
in ``vpp/vagrant/README.md`` and send traffic to the two ``nginx`` pods
using ``wget``.

::

    cd vpp/vagrant/vagrant-scripts/
    vagrant ssh k8s-master

    vagrant@k8s-master:~$ kubectl get pods -o wide
    NAME                   READY     STATUS    RESTARTS   AGE       IP         NODE
    nginx-8586cf59-768qw   1/1       Running   0          11d       10.1.2.3   k8s-worker1
    nginx-8586cf59-d27h2   1/1       Running   0          11d       10.1.2.2   k8s-worker1

    vagrant@k8s-master:~$ wget 10.1.2.2
    --2018-02-08 16:46:01--  http://10.1.2.2/
    Connecting to 10.1.2.2:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 612 [text/html]
    Saving to: ‘index.html’
    index.html                       100%[=========================================================>]     612  --.-KB/s    in 0.004s
    2018-02-08 16:46:01 (162 KB/s) - ‘index.html’ saved [612/612]

    vagrant@k8s-master:~$ wget 10.1.2.3
    --2018-02-08 16:46:02--  http://10.1.2.3/
    Connecting to 10.1.2.3:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 612 [text/html]
    Saving to: ‘index.html.1’
    index.html.1                     100%[=========================================================>]     612  --.-KB/s    in 0.004s
    2018-02-08 16:46:02 (143 KB/s) - ‘index.html.1’ saved [612/612]

Check the Packets Captured by VPP
---------------------------------

Back in the first terminal, check the packets captured by VPP.

::

    vpp# show trace
    ...
    ...
    Packet 33

    21:34:51:476110: tapcli-rx
      tapcli-2
    21:34:51:476115: ethernet-input
      IP4: 00:00:00:00:00:02 -> 02:fe:72:95:66:c7
    21:34:51:476117: ip4-input
      TCP: 10.1.2.3 -> 172.30.1.2
        tos 0x00, ttl 64, length 52, checksum 0x6fb4
        fragment id 0x11ec, flags DONT_FRAGMENT
      TCP: 80 -> 58430
        seq. 0x5db741c8 ack 0x709defa7
        flags 0x11 FIN ACK, tcp header: 32 bytes
        window 235, checksum 0x55c3
    21:34:51:476118: nat44-out2in
      NAT44_OUT2IN: sw_if_index 6, next index 1, session index -1
    21:34:51:476120: ip4-lookup
      fib 0 dpo-idx 23 flow hash: 0x00000000
      TCP: 10.1.2.3 -> 172.30.1.2
        tos 0x00, ttl 64, length 52, checksum 0x6fb4
        fragment id 0x11ec, flags DONT_FRAGMENT
      TCP: 80 -> 58430
        seq. 0x5db741c8 ack 0x709defa7
        flags 0x11 FIN ACK, tcp header: 32 bytes
        window 235, checksum 0x55c3
    21:34:51:476121: ip4-load-balance
      fib 0 dpo-idx 23 flow hash: 0x00000000
      TCP: 10.1.2.3 -> 172.30.1.2
        tos 0x00, ttl 64, length 52, checksum 0x6fb4
        fragment id 0x11ec, flags DONT_FRAGMENT
      TCP: 80 -> 58430
        seq. 0x5db741c8 ack 0x709defa7
        flags 0x11 FIN ACK, tcp header: 32 bytes
        window 235, checksum 0x55c3
    21:34:51:476122: ip4-rewrite
      tx_sw_if_index 3 dpo-idx 5 : ipv4 via 192.168.30.1 loop0: 1a2b3c4d5e011a2b3c4d5e020800 flow hash: 0x00000000
      00000000: 1a2b3c4d5e011a2b3c4d5e0208004500003411ec40003f0670b40a010203ac1e
      00000020: 01020050e43e5db741c8709defa7801100eb55c300000101080a0f4b
    21:34:51:476123: loop0-output
      loop0
      IP4: 1a:2b:3c:4d:5e:02 -> 1a:2b:3c:4d:5e:01
      TCP: 10.1.2.3 -> 172.30.1.2
        tos 0x00, ttl 63, length 52, checksum 0x70b4
        fragment id 0x11ec, flags DONT_FRAGMENT
      TCP: 80 -> 58430
        seq. 0x5db741c8 ack 0x709defa7
        flags 0x11 FIN ACK, tcp header: 32 bytes
        window 235, checksum 0x55c3
    21:34:51:476124: l2-input
      l2-input: sw_if_index 3 dst 1a:2b:3c:4d:5e:01 src 1a:2b:3c:4d:5e:02
    21:34:51:476125: l2-fwd
      l2-fwd:   sw_if_index 3 dst 1a:2b:3c:4d:5e:01 src 1a:2b:3c:4d:5e:02 bd_index 1
    21:34:51:476125: l2-output
      l2-output: sw_if_index 4 dst 1a:2b:3c:4d:5e:01 src 1a:2b:3c:4d:5e:02 data 08 00 45 00 00 34 11 ec 40 00 3f 06
    21:34:51:476126: vxlan4-encap
      VXLAN encap to vxlan_tunnel0 vni 10
    21:34:51:476126: ip4-load-balance
      fib 4 dpo-idx 22 flow hash: 0x00000103
      UDP: 192.168.16.2 -> 192.168.16.1
        tos 0x00, ttl 254, length 102, checksum 0x1b33
        fragment id 0x0000
      UDP: 24320 -> 4789
        length 82, checksum 0x0000
    21:34:51:476127: ip4-rewrite
      tx_sw_if_index 1 dpo-idx 4 : ipv4 via 192.168.16.1 GigabitEthernet0/8/0: 080027b2610908002733fb6f0800 flow hash: 0x00000103
      00000000: 080027b2610908002733fb6f08004500006600000000fd111c33c0a81002c0a8
      00000020: 10015f0012b5005200000800000000000a001a2b3c4d5e011a2b3c4d
    21:34:51:476127: GigabitEthernet0/8/0-output
      GigabitEthernet0/8/0
      IP4: 08:00:27:33:fb:6f -> 08:00:27:b2:61:09
      UDP: 192.168.16.2 -> 192.168.16.1
        tos 0x00, ttl 253, length 102, checksum 0x1c33
        fragment id 0x0000
      UDP: 24320 -> 4789
        length 82, checksum 0x0000
    21:34:51:476128: GigabitEthernet0/8/0-tx
      GigabitEthernet0/8/0 tx queue 0
      buffer 0xfa7f: current data -50, length 116, free-list 0, clone-count 0, totlen-nifb 0, trace 0x20
                      l2-hdr-offset 0 l3-hdr-offset 14
      PKT MBUF: port 255, nb_segs 1, pkt_len 116
        buf_len 2176, data_len 116, ol_flags 0x0, data_off 78, phys_addr 0x569ea040
        packet_type 0x0 l2_len 0 l3_len 0 outer_l2_len 0 outer_l3_len 0
      IP4: 08:00:27:33:fb:6f -> 08:00:27:b2:61:09
      UDP: 192.168.16.2 -> 192.168.16.1
        tos 0x00, ttl 253, length 102, checksum 0x1c33
        fragment id 0x0000
      UDP: 24320 -> 4789
        length 82, checksum 0x0000

In the above captured packet, we can see:

-  Input queue name ``tapcli-rx``
-  Pod’s IP address ``10.1.2.3``
-  IP address of the master node ``172.30.1.2``, which sent the ``wget``
   traffic to the two pods
-  HTTP port ``80``, destination port and TCP protocol
   (``TCP: 80 -> 58430``)
-  NAT queue name ``nat44-out2in``
-  VXLAN VNI ID ``VXLAN encap to vxlan_tunnel0 vni 10``
-  VXLAN UDP port ``4789``
-  IP address of ``GigabitEthernet0/8/0`` interface (``192.168.16.2``)
-  Packet on the outgoing queue ``GigabitEthernet0/8/0-tx``

Find IP Addresses of GigabitEthernet and the Tap Interfaces
-----------------------------------------------------------

Enter the following commands to find the IP addresses and Tap
interfaces:

::

   vpp# show int address
   GigabitEthernet0/8/0 (up):
     L3 192.168.16.2/24
   local0 (dn):
   loop0 (up):
     L2 bridge bd-id 1 idx 1 shg 0 bvi
     L3 192.168.30.2/24
   tapcli-0 (up):
     L3 172.30.2.1/24
   tapcli-1 (up):
     L3 10.2.1.2/32
   tapcli-2 (up):
     L3 10.2.1.3/32
   vxlan_tunnel0 (up):
     L2 bridge bd-id 1 idx 1 shg 0

Other Useful VPP CLIs
---------------------

Enter the following commands to see additional information about VPP:

::

   vpp# show int
                 Name               Idx       State          Counter          Count
   GigabitEthernet0/8/0              1         up       rx packets                   138
                                                        rx bytes                   18681
                                                        tx packets                   100
                                                        tx bytes                   29658
                                                        drops                          1
                                                        ip4                          137
                                                        tx-error                       2
   local0                            0        down      drops                          1
   loop0                             3         up       rx packets                   137
                                                        rx bytes                    9853
                                                        tx packets                   200
                                                        tx bytes                   49380
                                                        drops                          1
                                                        ip4                          136
   tapcli-0                          2         up       rx packets                     8
                                                        rx bytes                     600
                                                        tx packets                     1
                                                        tx bytes                      42
                                                        drops                          9
                                                        ip6                            7
   tapcli-1                          5         up       rx packets                    56
                                                        rx bytes                   13746
                                                        tx packets                    78
                                                        tx bytes                    6733
                                                        drops                          1
                                                        ip4                           56
   tapcli-2                          6         up       rx packets                    42
                                                        rx bytes                   10860
                                                        tx packets                    58
                                                        tx bytes                    4996
                                                        drops                          1
                                                        ip4                           42
   vxlan_tunnel0                     4         up       rx packets                   137
                                                        rx bytes                   11771
                                                        tx packets                   100
                                                        tx bytes                   28290

   vpp# show hardware
                 Name                Idx   Link  Hardware
   GigabitEthernet0/8/0               1     up   GigabitEthernet0/8/0
     Ethernet address 08:00:27:33:fb:6f
     Intel 82540EM (e1000)
       carrier up full duplex speed 1000 mtu 9216
       rx queues 1, rx desc 1024, tx queues 1, tx desc 1024
       cpu socket 0

       tx frames ok                                         100
       tx bytes ok                                        29658
       rx frames ok                                         138
       rx bytes ok                                        19233
       extended stats:
         rx good packets                                    138
         tx good packets                                    100
         rx good bytes                                    19233
         tx good bytes                                    29658
   local0                             0    down  local0
     local
   loop0                              3     up   loop0
     Ethernet address 1a:2b:3c:4d:5e:02
   tapcli-0                           2     up   tapcli-0
     Ethernet address 02:fe:95:07:df:9c
   tapcli-1                           5     up   tapcli-1
     Ethernet address 02:fe:3f:5f:0f:9a
   tapcli-2                           6     up   tapcli-2
     Ethernet address 02:fe:72:95:66:c7
   vxlan_tunnel0                      4     up   vxlan_tunnel0
     VXLAN

   vpp# show bridge-domain
     BD-ID   Index   BSN  Age(min)  Learning  U-Forwrd  UU-Flood  Flooding  ARP-Term  BVI-Intf
       1       1      1     off        on        on        on        on       off      loop0

   vpp# show bridge-domain 1 detail
     BD-ID   Index   BSN  Age(min)  Learning  U-Forwrd  UU-Flood  Flooding  ARP-Term  BVI-Intf
       1       1      1     off        on        on        on        on       off      loop0

              Interface           If-idx ISN  SHG  BVI  TxFlood        VLAN-Tag-Rewrite
                loop0               3     3    0    *      *                 none
            vxlan_tunnel0           4     1    0    -      *                 none

   vpp# show l2fib verbose
       Mac-Address     BD-Idx If-Idx BSN-ISN Age(min) static filter bvi         Interface-Name
    1a:2b:3c:4d:5e:02    1      3      0/0      -       *      -     *               loop0
    1a:2b:3c:4d:5e:01    1      4      1/1      -       -      -     -           vxlan_tunnel0
   L2FIB total/learned entries: 2/1  Last scan time: 0.0000e0sec  Learn limit: 4194304

   vpp# show ip fib
   ipv4-VRF:0, fib_index:0, flow hash:[src dst sport dport proto ] locks:[src:(nil):2, src:adjacency:3, src:default-route:1, ]
   0.0.0.0/0
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:1 buckets:1 uRPF:21 to:[0:0]]
       [0] [@5]: ipv4 via 172.30.2.2 tapcli-0: def35b93961902fe9507df9c0800
   0.0.0.0/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:2 buckets:1 uRPF:1 to:[0:0]]
       [0] [@0]: dpo-drop ip4
   10.1.1.0/24
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:24 buckets:1 uRPF:29 to:[0:0]]
       [0] [@10]: dpo-load-balance: [proto:ip4 index:23 buckets:1 uRPF:28 to:[0:0] via:[98:23234]]
             [0] [@5]: ipv4 via 192.168.30.1 loop0: 1a2b3c4d5e011a2b3c4d5e020800
   10.1.2.2/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:27 buckets:1 uRPF:12 to:[78:5641]]
       [0] [@5]: ipv4 via 10.1.2.2 tapcli-1: 00000000000202fe3f5f0f9a0800
   10.1.2.3/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:29 buckets:1 uRPF:32 to:[58:4184]]
       [0] [@5]: ipv4 via 10.1.2.3 tapcli-2: 00000000000202fe729566c70800
   10.2.1.2/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:26 buckets:1 uRPF:31 to:[0:0]]
       [0] [@2]: dpo-receive: 10.2.1.2 on tapcli-1
   10.2.1.3/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:28 buckets:1 uRPF:33 to:[0:0]]
       [0] [@2]: dpo-receive: 10.2.1.3 on tapcli-2
   172.30.1.0/24
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:25 buckets:1 uRPF:29 to:[98:23234]]
       [0] [@10]: dpo-load-balance: [proto:ip4 index:23 buckets:1 uRPF:28 to:[0:0] via:[98:23234]]
             [0] [@5]: ipv4 via 192.168.30.1 loop0: 1a2b3c4d5e011a2b3c4d5e020800
   172.30.2.0/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:14 buckets:1 uRPF:15 to:[0:0]]
       [0] [@0]: dpo-drop ip4
   172.30.2.0/24
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:13 buckets:1 uRPF:14 to:[0:0]]
       [0] [@4]: ipv4-glean: tapcli-0
   172.30.2.1/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:16 buckets:1 uRPF:19 to:[0:0]]
       [0] [@2]: dpo-receive: 172.30.2.1 on tapcli-0
   172.30.2.2/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:17 buckets:1 uRPF:18 to:[0:0]]
       [0] [@5]: ipv4 via 172.30.2.2 tapcli-0: def35b93961902fe9507df9c0800
   172.30.2.255/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:15 buckets:1 uRPF:17 to:[0:0]]
       [0] [@0]: dpo-drop ip4
   192.168.16.0/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:10 buckets:1 uRPF:9 to:[0:0]]
       [0] [@0]: dpo-drop ip4
   192.168.16.1/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:22 buckets:1 uRPF:34 to:[0:0] via:[100:28290]]
       [0] [@5]: ipv4 via 192.168.16.1 GigabitEthernet0/8/0: 080027b2610908002733fb6f0800
   192.168.16.0/24
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:9 buckets:1 uRPF:30 to:[0:0]]
       [0] [@4]: ipv4-glean: GigabitEthernet0/8/0
   192.168.16.2/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:12 buckets:1 uRPF:13 to:[137:16703]]
       [0] [@2]: dpo-receive: 192.168.16.2 on GigabitEthernet0/8/0
   192.168.16.255/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:11 buckets:1 uRPF:11 to:[0:0]]
       [0] [@0]: dpo-drop ip4
   192.168.30.0/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:19 buckets:1 uRPF:23 to:[0:0]]
       [0] [@0]: dpo-drop ip4
   192.168.30.1/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:23 buckets:1 uRPF:28 to:[0:0] via:[98:23234]]
       [0] [@5]: ipv4 via 192.168.30.1 loop0: 1a2b3c4d5e011a2b3c4d5e020800
   192.168.30.0/24
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:18 buckets:1 uRPF:22 to:[0:0]]
       [0] [@4]: ipv4-glean: loop0
   192.168.30.2/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:21 buckets:1 uRPF:27 to:[0:0]]
       [0] [@2]: dpo-receive: 192.168.30.2 on loop0
   192.168.30.255/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:20 buckets:1 uRPF:25 to:[0:0]]
       [0] [@0]: dpo-drop ip4
   224.0.0.0/4
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:4 buckets:1 uRPF:3 to:[0:0]]
       [0] [@0]: dpo-drop ip4
   240.0.0.0/4
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:3 buckets:1 uRPF:2 to:[0:0]]
       [0] [@0]: dpo-drop ip4
   255.255.255.255/32
     unicast-ip4-chain
     [@0]: dpo-load-balance: [proto:ip4 index:5 buckets:1 uRPF:4 to:[0:0]]
       [0] [@0]: dpo-drop ip4