.. _homegateway: .. toctree:: Using VPP as a Home Gateway =========================== Vpp running on a small system (with appropriate NICs) makes a fine home gateway. The resulting system performs far in excess of requirements: a TAG=vpp_debug image runs at a vector size of ~1.2 terminating a 150-mbit down / 10-mbit up cable modem connection. At a minimum, install sshd and the isc-dhcp-server. If you prefer, you can use dnsmasq. Configuration files ------------------- /etc/vpp/startup.conf:: unix { nodaemon log /var/log/vpp/vpp.log full-coredump cli-listen /run/vpp/cli.sock startup-config /setup.gate poll-sleep-usec 100 gid vpp } api-segment { gid vpp } dpdk { dev 0000:03:00.0 dev 0000:14:00.0 etc. } plugins { ## Disable all plugins, selectively enable specific plugins ## YMMV, you may wish to enable other plugins (acl, etc.) plugin default { disable } plugin dpdk_plugin.so { enable } plugin nat_plugin.so { enable } ## if you plan to use the time-based MAC filter plugin mactime_plugin.so { enable } } /etc/dhcp/dhcpd.conf:: subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.10 192.168.1.99; option routers 192.168.1.1; option domain-name-servers 8.8.8.8; } If you decide to enable the vpp dns name resolver, substitute 192.168.1.2 for 8.8.8.8 in the dhcp server configuration. /etc/default/isc-dhcp-server:: # On which interfaces should the DHCP server (dhcpd) serve DHCP requests? # Separate multiple interfaces with spaces, e.g. "eth0 eth1". INTERFACESv4="lstack" INTERFACESv6="" /etc/ssh/sshd_config:: # What ports, IPs and protocols we listen for Port <REDACTED-high-number-port> # Change to no to disable tunnelled clear text passwords PasswordAuthentication no For your own comfort and safety, do NOT allow password authentication and do not answer ssh requests on port 22. Experience shows several hack attempts per hour on port 22, but none (ever) on random high-number ports. vpp configuration (/setup.gate):: comment { This is the WAN interface } set int state GigabitEthernet3/0/0 up comment { set int mac address GigabitEthernet3/0/0 mac-to-clone-if-needed } set dhcp client intfc GigabitEthernet3/0/0 hostname vppgate comment { Create a BVI loopback interface} loop create set int l2 bridge loop0 1 bvi set int ip address loop0 192.168.1.1/24 set int state loop0 up comment { Add more inside interfaces as needed ... } set int l2 bridge GigabitEthernet0/14/0 1 set int state GigabitEthernet0/14/0 up comment { dhcp server and host-stack access } create tap host-if-name lstack host-ip4-addr 192.168.1.2/24 host-ip4-gw 192.168.1.1 set int l2 bridge tap0 1 set int state tap0 up comment { Configure NAT} nat44 add interface address GigabitEthernet3/0/0 set interface nat44 in loop0 out GigabitEthernet3/0/0 comment { allow inbound ssh to the <REDACTED-high-number-port> } nat44 add static mapping local 192.168.1.2 <REDACTED> external GigabitEthernet3/0/0 <REDACTED> tcp comment { if you want to use the vpp DNS server, add the following } comment { Remember to adjust the isc-dhcp-server configuration appropriately } comment { nat44 add identity mapping external GigabitEthernet3/0/0 udp 53053 } comment { bin dns_name_server_add_del 8.8.8.8 } comment { bin dns_name_server_add_del 68.87.74.166 } comment { bin dns_enable_disable } comment { see patch below, which adds these commands } service restart isc-dhcp-server Systemd configuration --------------------- In a typical home-gateway use-case, vpp owns the one-and-only WAN link with a prayer of reaching the public internet. Simple things like updating distro software requires use of the "lstack" interface created above, and configuring a plausible upstream DNS name resolver. Configure /etc/systemd/resolved.conf as follows. /etc/systemd/resolved.conf:: [Resolve] DNS=8.8.8.8 #FallbackDNS= #Domains= #LLMNR=no #MulticastDNS=no #DNSSEC=no #Cache=yes #DNSStubListener=yes Netplan configuration --------------------- If you want to configure a static IP address on one of your home-gateway Ethernet ports on Ubuntu 18.04, you'll need to configure netplan. Netplan is relatively new. It and the network manager GUI and can be cranky. In the configuration shown below, s/enp4s0/<your-interface>/... /etc/netplan-01-netcfg.yaml:: # This file describes the network interfaces available on your system # For more information, see netplan(5). network: version: 2 renderer: networkd ethernets: enp4s0: dhcp4: no addresses: [192.168.2.254/24] gateway4: 192.168.2.100 nameservers: search: [my.local] addresses: [8.8.8.8] /etc/systemd/network-10.enp4s0.network:: [Match] Name=enp4s0 [Link] RequiredForOnline=no [Network] ConfigureWithoutCarrier=true Address=192.168.2.254/24 Note that we've picked an IP address for the home gateway which is on an independent unrouteable subnet. This is handy for installing (and possibly reverting) new vpp software. Installing new vpp software --------------------------- If you're **sure** that a given set of vpp Debian packages will install and work properly, you can install them while logged into the gateway via the lstack / nat path. This procedure is a bit like standing on a rug and yanking it. If all goes well, a perfect back-flip occurs. If not, you may wish that you'd configured a static IP address on a reserved Ethernet interface as described above. Installing a new vpp image via ssh to 192.168.1.2:: # nohup dpkg -i *.deb >/dev/null 2>&1 & Within a few seconds, the inbound ssh connection SHOULD begin to respond again. If it does not, you'll have to debug the issue(s). Testing new software -------------------- If you frequently test new home gateway software, it may be handy to set up a test gateway behind your production gateway. This testing methodology reduces complaints from family members, to name one benefit. Change the inside network (dhcp) subnet from 192.168.1.0/24 to 192.168.3.0/24, change the (dhcp) advertised router to 192.168.3.1, reconfigure the vpp tap interface addresses onto the 192.168.3.0/24 subnet, and you should be all set. This scenario nats traffic twice: first, from the 192.168.3.0/24 network onto the 192.168.1.0/24 network. Next, from the 192.168.1.0/24 network onto the public internet. Patches ------- You'll need this patch to add the "service restart" command:: diff --git a/src/vpp/vnet/main.c b/src/vpp/vnet/main.c index 6e136e19..69189c93 100644 --- a/src/vpp/vnet/main.c +++ b/src/vpp/vnet/main.c @@ -18,6 +18,8 @@ #include <vlib/unix/unix.h> #include <vnet/plugin/plugin.h> #include <vnet/ethernet/ethernet.h> +#include <vnet/ip/ip4_packet.h> +#include <vnet/ip/format.h> #include <vpp/app/version.h> #include <vpp/api/vpe_msg_enum.h> #include <limits.h> @@ -400,6 +402,63 @@ VLIB_CLI_COMMAND (test_crash_command, static) = { #endif +static clib_error_t * +restart_isc_dhcp_server_command_fn (vlib_main_t * vm, + unformat_input_t * input, + vlib_cli_command_t * cmd) +{ + int rv __attribute__((unused)); + /* Wait three seconds... */ + vlib_process_suspend (vm, 3.0); + + rv = system ("/usr/sbin/service isc-dhcp-server restart"); + + vlib_cli_output (vm, "Restarted the isc-dhcp-server..."); + return 0; +} + +/* *INDENT-OFF* */ +VLIB_CLI_COMMAND (restart_isc_dhcp_server_command, static) = { + .path = "service restart isc-dhcp-server", + .short_help = "restarts the isc-dhcp-server", + .function = restart_isc_dhcp_server_command_fn, +}; +/* *INDENT-ON* */ + Using the time-based mac filter plugin -------------------------------------- If you need to restrict network access for certain devices to specific daily time ranges, configure the "mactime" plugin. Add it to the list of enabled plugins in /etc/vpp/startup.conf, then enable the feature on the NAT "inside" interfaces:: bin mactime_enable_disable GigabitEthernet0/14/0 bin mactime_enable_disable GigabitEthernet0/14/1 ... Create the required src-mac-address rule database. There are 4 rule entry types: * allow-static - pass traffic from this mac address * drop-static - drop traffic from this mac address * allow-range - pass traffic from this mac address at specific times * drop-range - drop traffic from this mac address at specific times Here are some examples:: bin mactime_add_del_range name alarm-system mac 00:de:ad:be:ef:00 allow-static bin mactime_add_del_range name unwelcome mac 00:de:ad:be:ef:01 drop-static bin mactime_add_del_range name not-during-business-hours mac <mac> drop-range Mon - Fri 7:59 - 18:01 bin mactime_add_del_range name monday-busines-hours mac <mac> allow-range Mon 7:59 - 18:01