# Copyright (c) 2015 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # Scripts require non-POSIX parts of bash SHELL := /bin/bash DPDK_BUILD_DIR ?= $(CURDIR)/_build DPDK_INSTALL_DIR ?= $(CURDIR)/_install DPDK_PKTMBUF_HEADROOM ?= 128 DPDK_CACHE_LINE_SIZE ?= 64 DPDK_DOWNLOAD_DIR ?= $(HOME)/Downloads DPDK_DEBUG ?= n DPDK_MLX4_PMD ?= n DPDK_MLX5_PMD ?= n B := $(DPDK_BUILD_DIR) I := $(DPDK_INSTALL_DIR) DPDK_VERSION ?= 18.02 PKG_SUFFIX ?= vpp1 DPDK_BASE_URL ?= http://fast.dpdk.org/rel DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL) DPDK_17.11_TARBALL_MD5_CKSUM := 53ee9e054a8797c9e67ffa0eb5d0c701 DPDK_18.02_TARBALL_MD5_CKSUM := ca13077a014a2102c6e10153dfa3b920 DPDK_SOURCE := $(B)/dpdk-$(DPDK_VERSION) MACHINE=$(shell uname -m) NASM_BASE_URL := http://www.nasm.us/pub/nasm/releasebuilds NASM_VER := 2.13.01 NASM_TARBALL := nasm-$(NASM_VER).tar.xz NASM_TAR_URL := $(NASM_BASE_URL)/$(NASM_VER)/$(NASM_TARBALL) NASM_SOURCE := $(B)/nasm-$(NASM_VER) ifeq ($(DPDK_VERSION),17.11) IPSEC_MB_VER ?= 0.47 else IPSEC_MB_VER ?= 0.48 endif ifeq ($(MACHINE),$(filter $(MACHINE),x86_64)) AESNI ?= y $(info Building IPSec-MB $(IPSEC_MB_VER) library) else AESNI ?= N endif AESNIMB_LIB_TARBALL := v$(IPSEC_MB_VER).tar.gz AESNIMB_LIB_TARBALL_URL := http://github.com/01org/intel-ipsec-mb/archive/$(AESNIMB_LIB_TARBALL) AESNIMB_LIB_SOURCE := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER) ifneq (,$(findstring clang,$(CC))) DPDK_CC=clang else ifneq (,$(findstring icc,$(CC))) DPDK_CC=icc else DPDK_CC=gcc endif ############################################################################## # Intel x86 ############################################################################## ifeq ($(MACHINE),$(filter $(MACHINE),x86_64 i686)) DPDK_TARGET ?= $(MACHINE)-native-linuxapp-$(DPDK_CC) DPDK_MACHINE ?= nhm DPDK_TUNE ?= core-avx2 ############################################################################## # ARM64 ############################################################################## else ifeq ($(MACHINE),aarch64) export CROSS="" DPDK_TARGET ?= arm64-armv8a-linuxapp-$(DPDK_CC) DPDK_MACHINE ?= armv8a DPDK_TUNE ?= generic CPU_IMP_ARM = 0x41 CPU_IMP_CAVIUM = 0x43 CPU_PART_ARM_CORTEX_A53 = 0xd03 CPU_PART_ARM_CORTEX_A57 = 0xd07 CPU_PART_ARM_CORTEX_A72 = 0xd08 CPU_PART_ARM_CORTEX_A73 = 0xd09 CPU_PART_CAVIUM_THUNDERX = 0x0a1 CPU_PART_CAVIUM_THUNDERX_81XX = 0x0a2 CPU_PART_CAVIUM_THUNDERX_83XX = 0x0a3 MIDR_IMPLEMENTER=$(shell awk '/implementer/ {print $$4;exit}' /proc/cpuinfo) MIDR_PARTNUM=$(shell awk '/part/ {print $$4;exit}' /proc/cpuinfo) ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_ARM)) ############################################################################## # Arm Cortex ############################################################################## CPU_PART_ARM_TUNE := $(CPU_PART_ARM_CORTEX_A53)/cortex-a53 \ $(CPU_PART_ARM_CORTEX_A57)/cortex-a57 \ $(CPU_PART_ARM_CORTEX_A72)/cortex-a72 \ $(CPU_PART_ARM_CORTEX_A73)/cortex-a73 CPU_TUNE = $(notdir $(filter $(MIDR_PARTNUM)/%,$(CPU_PART_ARM_TUNE))) ifneq ($(CPU_TUNE),) DPDK_TUNE = $(CPU_TUNE) else $(warning Unknown Arm CPU) endif else ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_CAVIUM)) ############################################################################## # Cavium ThunderX ############################################################################## ifneq (,$(findstring $(MIDR_PARTNUM),$(CPU_PART_CAVIUM_THUNDERX) \ $(CPU_PART_CAVIUM_THUNDERX_81XX) $(CPU_PART_CAVIUM_THUNDERX_83XX))) DPDK_TARGET = arm64-thunderx-linuxapp-$(DPDK_CC) DPDK_MACHINE = thunderx else $(warning Unknown Cavium CPU) endif endif ############################################################################## # Unknown platform ############################################################################## else $(error Unknown platform) endif # /proc/cpuinfo does not exist on platforms without a /proc and on some # platforms, notably inside containers, it has no content. In those cases # we assume there's 1 processor; we use 2*ncpu for the -j option. # NB: GNU Make 4.2 will let us use '$(file </proc/cpuinfo)' to both test # for file presence and content; for now this will have to do. JOBS := $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo),\ $(shell grep -c ^processor /proc/cpuinfo), 2) # compiler/linker custom arguments DPDK_CPU_CFLAGS := -pie -fPIC ifeq ($(DPDK_DEBUG),n) DPDK_EXTRA_CFLAGS := -g -mtune=$(DPDK_TUNE) else DPDK_EXTRA_CFLAGS := -g -O0 endif DPDK_MAKE_EXTRA_ARGS += AESNI_MULTI_BUFFER_LIB_PATH=$(AESNIMB_LIB_SOURCE) # assemble DPDK make arguments DPDK_MAKE_ARGS := -C $(DPDK_SOURCE) -j $(JOBS) \ T=$(DPDK_TARGET) \ RTE_CONFIG_TEMPLATE=../custom-config \ EXTRA_CFLAGS="$(DPDK_EXTRA_CFLAGS)" \ EXTRA_LDFLAGS="$(DPDK_EXTRA_LDFLAGS)" \ CPU_CFLAGS="$(DPDK_CPU_CFLAGS)" \ DESTDIR=$(I) \ $(DPDK_MAKE_EXTRA_ARGS) define set @if grep -q CONFIG_$1 $@ ; \ then sed -i -e 's/.*\(CONFIG_$1=\).*/\1$2/' $@ ; \ else echo CONFIG_$1=$2 >> $@ ; \ fi endef all: build $(B)/custom-config: $(B)/.patch.ok Makefile @echo --- generating custom config from $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) --- @cpp -undef -ffreestanding -x assembler-with-cpp $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) $@ $(call set,RTE_MACHINE,$(DPDK_MACHINE)) @# modify options $(call set,RTE_MAX_LCORE,256) $(call set,RTE_PKTMBUF_HEADROOM,$(DPDK_PKTMBUF_HEADROOM)) $(call set,RTE_CACHE_LINE_SIZE,$(DPDK_CACHE_LINE_SIZE)) $(call set,RTE_LIBEAL_USE_HPET,y) $(call set,RTE_BUILD_COMBINE_LIBS,y) $(call set,RTE_PCI_CONFIG,y) $(call set,RTE_PCI_EXTENDED_TAG,"on") $(call set,RTE_PCI_MAX_READ_REQUEST_SIZE,4096) @# enable debug init for device drivers $(call set,RTE_LIBRTE_I40E_DEBUG_INIT,$(DPDK_DEBUG)) $(call set,RTE_LIBRTE_IXGBE_DEBUG_INIT,$(DPDK_DEBUG)) $(call set,RTE_LIBRTE_E1000_DEBUG_INIT,$(DPDK_DEBUG)) $(call set,RTE_LIBRTE_VIRTIO_DEBUG_INIT,$(DPDK_DEBUG)) $(call set,RTE_LIBRTE_VMXNET3_DEBUG_INIT,$(DPDK_DEBUG)) $(call set,RTE_LIBRTE_PMD_BOND,y) $(call set,RTE_LIBRTE_IP_FRAG,y) $(call set,RTE_LIBRTE_PMD_QAT,y) $(call set,RTE_LIBRTE_PMD_AESNI_MB,$(AESNI)) $(call set,RTE_LIBRTE_PMD_AESNI_GCM,$(AESNI)) $(call set,RTE_LIBRTE_MLX4_PMD,$(DPDK_MLX4_PMD)) $(call set,RTE_LIBRTE_MLX5_PMD,$(DPDK_MLX5_PMD)) $(call set,RTE_LIBRTE_MLX4_DLOPEN_DEPS,$(DPDK_MLX4_PMD)) $(call set,RTE_LIBRTE_MLX5_DLOPEN_DEPS,$(DPDK_MLX5_PMD)) @# not needed $(call set,RTE_LIBRTE_PMD_TAP,n) $(call set,RTE_LIBRTE_TIMER,n) $(call set,RTE_LIBRTE_CFGFILE,n) $(call set,RTE_LIBRTE_LPM,n) $(call set,RTE_LIBRTE_ACL,n) $(call set,RTE_LIBRTE_POWER,n) $(call set,RTE_LIBRTE_DISTRIBUTOR,n) $(call set,RTE_LIBRTE_PORT,n) $(call set,RTE_LIBRTE_TABLE,n) $(call set,RTE_LIBRTE_PIPELINE,n) $(call set,RTE_LIBRTE_FLOW_CLASSIFY,n) $(call set,RTE_KNI_KMOD,n) $(call set,RTE_EAL_IGB_UIO,n) @# currently broken in 18.02 $(call set,RTE_LIBRTE_DPAA_BUS,n) $(call set,RTE_LIBRTE_DPAA_MEMPOOL,n) $(call set,RTE_LIBRTE_DPAA_PMD,n) $(call set,RTE_LIBRTE_PMD_DPAA_SEC,n) $(call set,RTE_LIBRTE_PMD_DPAA_EVENTDEV,n) @rm -f .config.ok $(CURDIR)/$(DPDK_TARBALL): @if [ -e $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) ] ; \ then cp $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) $(CURDIR) ; \ else curl -o $(CURDIR)/$(DPDK_TARBALL) -LO $(DPDK_TAR_URL) ; \ fi @rm -f $(B)/.download.ok $(CURDIR)/$(NASM_TARBALL): @if [ -e $(DPDK_DOWNLOAD_DIR)/$(NASM_TARBALL) ] ; \ then cp $(DPDK_DOWNLOAD_DIR)/$(NASM_TARBALL) $(CURDIR) ; \ else curl -o $(CURDIR)/$(NASM_TARBALL) -LO $(NASM_TAR_URL) ; \ fi $(CURDIR)/$(AESNIMB_LIB_TARBALL): @if [ -e $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) ] ; \ then cp $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) $(CURDIR) ; \ else curl -o $@ -LO $(AESNIMB_LIB_TARBALL_URL) ; \ fi DPDK_DOWNLOADS = $(CURDIR)/$(DPDK_TARBALL) ifeq ($(AESNI),y) DPDK_DOWNLOADS += $(CURDIR)/$(NASM_TARBALL) DPDK_DOWNLOADS += $(CURDIR)/$(AESNIMB_LIB_TARBALL) endif $(B)/.download.ok: $(DPDK_DOWNLOADS) @mkdir -p $(B) @openssl md5 $< | cut -f 2 -d " " - > $(B)/$(DPDK_TARBALL).md5sum @([ "$$(<$(B)/$(DPDK_TARBALL).md5sum)" = "$(DPDK_$(DPDK_VERSION)_TARBALL_MD5_CKSUM)" ] || \ ( echo "Bad Checksum! Please remove $< and retry" && \ rm $(B)/$(DPDK_TARBALL).md5sum && false )) @touch $@ .PHONY: download download: $(B)/.download.ok $(B)/.extract.ok: $(B)/.download.ok @echo --- extracting $(DPDK_TARBALL) --- @tar --directory $(B) --extract --file $(CURDIR)/$(DPDK_TARBALL) ifeq ($(AESNI),y) @echo --- extracting $(NASM_TARBALL) --- @tar --directory $(B) --extract --file $(CURDIR)/$(NASM_TARBALL) @echo --- extracting $(AESNIMB_LIB_TARBALL) --- @tar --directory $(B) --extract --file $(CURDIR)/$(AESNIMB_LIB_TARBALL) endif @touch $@ .PHONY: extract extract: $(B)/.extract.ok $(B)/.patch.ok: $(B)/.extract.ok ifneq ($(wildcard $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch),) @echo --- patching --- @for f in $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch ; do \ echo Applying patch: $$(basename $$f) ; \ patch -p1 -d $(DPDK_SOURCE) < $$f ; \ done endif @touch $@ .PHONY: patch patch: $(B)/.patch.ok $(B)/.config.ok: $(B)/.patch.ok $(B)/custom-config @make $(DPDK_MAKE_ARGS) config @touch $@ .PHONY: config config: $(B)/.config.ok .PHONY: build-nasm build-nasm: cd $(NASM_SOURCE) && sh configure && make -j .PHONY: build-ipsec-mb build-ipsec-mb: mkdir -p $(I)/lib/ # Do not build GCM stuff if we are building ISA_L make -C $(AESNIMB_LIB_SOURCE) -j \ EXTRA_CFLAGS=-fPIC NASM=$(NASM_SOURCE)/nasm cp $(AESNIMB_LIB_SOURCE)/libIPSec_MB.a $(I)/lib/ .PHONY: build-dpdk build-dpdk: @if [ ! -e $(B)/.config.ok ] ; then echo 'Please run "make config" first' && false ; fi @make $(DPDK_MAKE_ARGS) install # Order matters ifeq ($(AESNI),y) BUILD_TARGETS += build-nasm BUILD_TARGETS += build-ipsec-mb endif BUILD_TARGETS += build-dpdk $(B)/.build.ok: $(BUILD_TARGETS) @touch $@ .PHONY: build build: $(B)/.build.ok .PHONY: install install: $(B)/.build.ok .PHONY: clean clean: @rm -rf $(B) $(I) ############################################################################## # .deb packaging ############################################################################## DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null) DEV_DEB=vpp-dpdk-dev_$(DPDK_VERSION)-$(PKG_SUFFIX)_$(DEB_ARCH).deb INSTALLED_DEB_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-dpdk-dev 2> /dev/null) .PHONY: build-deb install-deb check-deb deb/debian/changelog: Makefile @echo "vpp-dpdk ($(DPDK_VERSION)-$(PKG_SUFFIX)) unstable; urgency=low" > $@ @echo "" >> $@ @echo " * DPDK Release $(DPDK_VERSION)" >> $@ @echo "" >> $@ @echo " -- VPP Dev <vpp-dev@lists.fd.io> $(shell date -R)" >> $@ $(DEV_DEB): deb/debian/changelog @cd deb && dpkg-buildpackage -b -uc -us git clean -fdx deb build-deb: $(DEV_DEB) install-deb: ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) @echo "==========================================================" @echo " Out of date DPDK package installed." @echo " Installed: $(INSTALLED_DEB_VER)" @echo " Needed: $(DPDK_VERSION)-$(PKG_SUFFIX)" @echo "==========================================================" @make $(DEV_DEB) @sudo dpkg -i $(DEV_DEB) else @echo "==========================================================" @echo " Up-to-date DPDK package already installed" @echo "==========================================================" endif check-deb: ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) @echo "==========================================================" @echo " Outdated DPDK package detected:" @echo " Installed: vpp-dpdk-dev $(INSTALLED_DEB_VER)" @echo " Current: vpp-dpdk-dev $(DPDK_VERSION)-$(PKG_SUFFIX)" @echo "" @echo " Please upgrade by invoking 'make dpdk-install-dev'" @echo " from the top level directory." @echo "==========================================================" endif ############################################################################## # .rpm packaging ############################################################################## RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null) DEV_RPM=vpp-dpdk-devel-$(DPDK_VERSION)-$(PKG_SUFFIX).$(RPM_ARCH).rpm INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-dpdk-devel 2> /dev/null | grep -v "not inst") .PHONY: build-rpm install-rpm check-rpm $(DEV_RPM): Makefile rpm/vpp-dpdk.spec @rpmbuild -bb \ --define "_topdir $(CURDIR)/rpm" \ --define "_version $(DPDK_VERSION)" \ --define "_release $(PKG_SUFFIX)" \ $(CURDIR)/rpm/vpp-dpdk.spec mv rpm/RPMS/$(RPM_ARCH)/*.rpm . git clean -fdx rpm build-rpm: $(DEV_RPM) install-rpm: ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) @$(MAKE) $(DEV_RPM) sudo rpm -Uih $(DEV_RPM) else @echo "==========================================================" @echo " Up-to-date DPDK package already installed" @echo "==========================================================" endif check-rpm: ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) @echo "==========================================================" @echo " Outdated DPDK package detected:" @echo " Installed: vpp-dpdk-devel $(INSTALLED_RPM_VER)" @echo " Current: vpp-dpdk-devel $(DPDK_VERSION)-$(PKG_SUFFIX)" @echo "" @echo " Please upgrade by invoking 'make dpdk-install-dev'" @echo " from the top level directory." @echo "==========================================================" endif ############################################################################## # ebuild support ############################################################################## .PHONY: ebuild-build ebuild-install ebuild-build: ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),) @echo "==========================================================" @echo "Building DPDK from source. Consider installing development" @echo "package by invoking 'make dpdk-install-dev' from the" @echo "top level directory" @echo "==========================================================" make config else ifneq ($(INSTALLED_DEB_VER),) make check-deb endif ifneq ($(INSTALLED_RPM_VER),) make check-rpm endif endif ebuild-install: ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),) make install endif