# Copyright (c) 2015 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # Scripts require non-POSIX parts of bash SHELL := /bin/bash DPDK_BUILD_DIR ?= $(CURDIR)/_build DPDK_INSTALL_DIR ?= $(CURDIR)/_install DPDK_PKTMBUF_HEADROOM ?= 128 DPDK_DOWNLOAD_DIR ?= $(HOME)/Downloads DPDK_DEBUG ?= n DPDK_CRYPTO_SW_PMD ?= n DPDK_MLX4_PMD ?= n DPDK_MLX5_PMD ?= n B := $(DPDK_BUILD_DIR) I := $(DPDK_INSTALL_DIR) DPDK_VERSION ?= 17.05 PKG_SUFFIX ?= vpp3 DPDK_BASE_URL ?= http://fast.dpdk.org/rel DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL) DPDK_17.02_TARBALL_MD5_CKSUM := 6b9f7387c35641f4e8dbba3e528f2376 DPDK_17.05_TARBALL_MD5_CKSUM := 0a68c31cd6a6cabeed0a4331073e4c05 DPDK_SOURCE := $(B)/dpdk-$(DPDK_VERSION) ifeq ($(DPDK_CRYPTO_SW_PMD),y) AESNIMB_LIB_TARBALL := v0.44-gcm.2.tar.gz AESNIMB_LIB_TARBALL_URL := http://github.com/01org/intel-ipsec-mb/archive/$(AESNIMB_LIB_TARBALL) AESNIMB_LIB_SOURCE := $(B)/intel-ipsec-mb-0.44-gcm.2 ISA_L_CRYPTO_LIB_TARBALL := isa_l_crypto.tar.gz ISA_L_CRYPTO_LIB_TARBALL_URL := http://github.com/01org/isa-l_crypto/archive/master.tar.gz ISA_L_CRYPTO_LIB_SOURCE := $(B)/isa-l_crypto-master endif ifneq (,$(findstring clang,$(CC))) DPDK_CC=clang else ifneq (,$(findstring icc,$(CC))) DPDK_CC=icc else DPDK_CC=gcc endif MACHINE=$(shell uname -m) ############################################################################## # Intel x86 ############################################################################## ifeq ($(MACHINE),$(filter $(MACHINE),x86_64 i686)) DPDK_TARGET ?= $(MACHINE)-native-linuxapp-$(DPDK_CC) DPDK_MACHINE ?= nhm DPDK_TUNE ?= core-avx2 ############################################################################## # Cavium ThunderX ############################################################################## else ifneq (,$(findstring thunder,$(shell cat /sys/bus/pci/devices/0000:00:01.0/uevent | grep cavium))) export CROSS="" DPDK_TARGET ?= arm64-thunderx-linuxapp-$(DPDK_CC) DPDK_MACHINE ?= thunderx DPDK_TUNE ?= generic ############################################################################## # Unknown platofrm ############################################################################## else $(error unknown platform) endif JOBS := $(shell grep processor /proc/cpuinfo | wc -l) # compiler/linker custom arguments DPDK_CPU_CFLAGS := -pie -fPIC DPDK_EXTRA_LDFLAGS := -g ifeq ($(DPDK_DEBUG),n) DPDK_EXTRA_CFLAGS := -g -mtune=$(DPDK_TUNE) else DPDK_EXTRA_CFLAGS := -g -O0 endif ifeq ($(DPDK_CRYPTO_SW_PMD),y) DPDK_EXTRA_CFLAGS += -I$(I)/include DPDK_EXTRA_LDFLAGS += -L$(I)/lib DPDK_MAKE_EXTRA_ARGS += AESNI_MULTI_BUFFER_LIB_PATH=$(AESNIMB_LIB_SOURCE) endif # assemble DPDK make arguments DPDK_MAKE_ARGS := -C $(DPDK_SOURCE) -j $(JOBS) \ T=$(DPDK_TARGET) \ RTE_CONFIG_TEMPLATE=../custom-config \ EXTRA_CFLAGS="$(DPDK_EXTRA_CFLAGS)" \ EXTRA_LDFLAGS="$(DPDK_EXTRA_LDFLAGS)" \ CPU_CFLAGS="$(DPDK_CPU_CFLAGS)" \ DESTDIR=$(I) \ $(DPDK_MAKE_EXTRA_ARGS) DPDK_SOURCE_FILES := $(shell [ -e $(DPDK_SOURCE) ] && find $(DPDK_SOURCE) -name "*.[chS]") define set @if grep -q CONFIG_$1 $@ ; \ then sed -i -e 's/.*\(CONFIG_$1=\).*/\1$2/' $@ ; \ else echo CONFIG_$1=$2 >> $@ ; \ fi endef all: build $(B)/custom-config: $(B)/.patch.ok Makefile @echo --- generating custom config from $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) --- @cpp -undef -ffreestanding -x assembler-with-cpp $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) $@ $(call set,RTE_MACHINE,$(DPDK_MACHINE)) @# modify options $(call set,RTE_MAX_LCORE,256) $(call set,RTE_PKTMBUF_HEADROOM,$(DPDK_PKTMBUF_HEADROOM)) $(call set,RTE_LIBEAL_USE_HPET,y) $(call set,RTE_BUILD_COMBINE_LIBS,y) $(call set,RTE_PCI_CONFIG,y) $(call set,RTE_PCI_EXTENDED_TAG,"on") $(call set,RTE_PCI_MAX_READ_REQUEST_SIZE,4096) @# enable debug init for device drivers $(call set,RTE_LIBRTE_I40E_DEBUG_INIT,$(DPDK_DEBUG)) $(call set,RTE_LIBRTE_IXGBE_DEBUG_INIT,$(DPDK_DEBUG)) $(call set,RTE_LIBRTE_E1000_DEBUG_INIT,$(DPDK_DEBUG)) $(call set,RTE_LIBRTE_VIRTIO_DEBUG_INIT,$(DPDK_DEBUG)) $(call set,RTE_LIBRTE_VMXNET3_DEBUG_INIT,$(DPDK_DEBUG)) $(call set,RTE_LIBRTE_PMD_BOND,y) $(call set,RTE_LIBRTE_IP_FRAG,y) $(call set,RTE_LIBRTE_PMD_QAT,y) $(call set,RTE_LIBRTE_PMD_AESNI_MB,$(DPDK_CRYPTO_SW_PMD)) $(call set,RTE_LIBRTE_PMD_AESNI_GCM,$(DPDK_CRYPTO_SW_PMD)) $(call set,RTE_LIBRTE_MLX4_PMD,$(DPDK_MLX4_PMD)) $(call set,RTE_LIBRTE_MLX5_PMD,$(DPDK_MLX5_PMD)) @# not needed $(call set,RTE_LIBRTE_TIMER,n) $(call set,RTE_LIBRTE_CFGFILE,n) $(call set,RTE_LIBRTE_LPM,n) $(call set,RTE_LIBRTE_ACL,n) $(call set,RTE_LIBRTE_POWER,n) $(call set,RTE_LIBRTE_DISTRIBUTOR,n) $(call set,RTE_LIBRTE_PORT,n) $(call set,RTE_LIBRTE_TABLE,n) $(call set,RTE_LIBRTE_PIPELINE,n) $(call set,RTE_KNI_KMOD,n) $(call set,RTE_EAL_IGB_UIO,n) @rm -f .config.ok $(CURDIR)/$(DPDK_TARBALL): @if [ -e $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) ] ; \ then cp $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) $(CURDIR) ; \ else curl -o $(CURDIR)/$(DPDK_TARBALL) -LO $(DPDK_TAR_URL) ; \ fi @rm -f $(B)/.download.ok $(CURDIR)/$(AESNIMB_LIB_TARBALL): @if [ -e $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) ] ; \ then cp $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) $(CURDIR) ; \ else curl -o $@ -LO $(AESNIMB_LIB_TARBALL_URL) ; \ fi $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL): @if [ -e $(DPDK_DOWNLOAD_DIR)/$(ISA_L_CRYPTO_LIB_TARBALL) ] ; \ then cp $(DPDK_DOWNLOAD_DIR)/$(ISA_L_CRYPTO_LIB_TARBALL) $(CURDIR) ; \ else curl -o $@ -LO $(ISA_L_CRYPTO_LIB_TARBALL_URL) ; \ fi DPDK_DOWNLOADS = $(CURDIR)/$(DPDK_TARBALL) ifeq ($(DPDK_CRYPTO_SW_PMD),y) DPDK_DOWNLOADS += $(CURDIR)/$(AESNIMB_LIB_TARBALL) DPDK_DOWNLOADS += $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL) endif $(B)/.download.ok: $(DPDK_DOWNLOADS) @mkdir -p $(B) @openssl md5 $< | cut -f 2 -d " " - > $(B)/$(DPDK_TARBALL).md5sum @([ "$$(<$(B)/$(DPDK_TARBALL).md5sum)" = "$(DPDK_$(DPDK_VERSION)_TARBALL_MD5_CKSUM)" ] || \ ( echo "Bad Checksum! Please remove $< and retry" && \ rm $(B)/$(DPDK_TARBALL).md5sum && false )) @touch $@ .PHONY: download download: $(B)/.download.ok $(B)/.extract.ok: $(B)/.download.ok @echo --- extracting $(DPDK_TARBALL) --- @tar --directory $(B) --extract --file $(CURDIR)/$(DPDK_TARBALL) ifeq ($(DPDK_CRYPTO_SW_PMD),y) @echo --- extracting $(AESNIMB_LIB_TARBALL) --- @tar --directory $(B) --extract --file $(CURDIR)/$(AESNIMB_LIB_TARBALL) @echo --- extracting $(ISA_L_CRYPTO_LIB_TARBALL) --- @tar --directory $(B) --extract --file $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL) endif @touch $@ .PHONY: extract extract: $(B)/.extract.ok $(B)/.patch.ok: $(B)/.extract.ok ifneq ($(wildcard $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch),) @echo --- patching --- @for f in $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch ; do \ echo Applying patch: $$(basename $$f) ; \ patch -p1 -d $(DPDK_SOURCE) < $$f ; \ done endif @touch $@ .PHONY: patch patch: $(B)/.patch.ok $(B)/.config.ok: $(B)/.patch.ok $(B)/custom-config @make $(DPDK_MAKE_ARGS) config @touch $@ .PHONY: config config: $(B)/.config.ok $(B)/.build.ok: $(DPDK_SOURCE_FILES) @if [ ! -e $(B)/.config.ok ] ; then echo 'Please run "make config" first' && false ; fi ifeq ($(DPDK_CRYPTO_SW_PMD),y) # Build IPsec_MB library mkdir -p $(I)/lib/ make -C $(AESNIMB_LIB_SOURCE) -j NO_GCM=y cp $(AESNIMB_LIB_SOURCE)/libIPSec_MB.a $(I)/lib/ # Build ISA-L Crypto library cd $(ISA_L_CRYPTO_LIB_SOURCE) && ./autogen.sh && ./configure --prefix=$(I) make -C $(ISA_L_CRYPTO_LIB_SOURCE) -j install endif @make $(DPDK_MAKE_ARGS) install @touch $@ .PHONY: build build: $(B)/.build.ok .PHONY: install install: $(B)/.build.ok .PHONY: clean clean: @rm -rf $(B) $(I) ############################################################################## # .deb packaging ############################################################################## DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null) DEV_DEB=vpp-dpdk-dev_$(DPDK_VERSION)-$(PKG_SUFFIX)_$(DEB_ARCH).deb INSTALLED_DEB_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-dpdk-dev 2> /dev/null) .PHONY: build-deb install-deb check-deb deb/debian/changelog: Makefile @echo "vpp-dpdk ($(DPDK_VERSION)-$(PKG_SUFFIX)) unstable; urgency=low" > $@ @echo "" >> $@ @echo " * DPDK Release $(DPDK_VERSION)" >> $@ @echo "" >> $@ @echo " -- VPP Dev <vpp-dev@lists.fd.io> $(shell date -R)" >> $@ $(DEV_DEB): deb/debian/changelog @cd deb && dpkg-buildpackage -b -uc -us git clean -fdx deb build-deb: $(DEV_DEB) install-deb: ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) @make $(DEV_DEB) @sudo dpkg -i $(DEV_DEB) else @echo "==========================================================" @echo " Up-to-date DPDK package already installed" @echo "==========================================================" endif check-deb: ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) @echo "==========================================================" @echo " Outdated DPDK package detected:" @echo " Installed: vpp-dpdk-dev $(INSTALLED_DEB_VER)" @echo " Current: vpp-dpdk-dev $(DPDK_VERSION)-$(PKG_SUFFIX)" @echo "" @echo " Please upgrade by invoking 'make dpdk-install-dev'" @echo " from the top level directory." @echo "==========================================================" endif ############################################################################## # .rpm packaging ############################################################################## RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null) DEV_RPM=vpp-dpdk-devel-$(DPDK_VERSION)-$(PKG_SUFFIX).$(RPM_ARCH).rpm INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-dpdk-devel 2> /dev/null | grep -v "not inst") .PHONY: build-rpm install-rpm check-rpm $(DEV_RPM): Makefile rpm/vpp-dpdk.spec @rpmbuild -bb \ --define "_topdir $(CURDIR)/rpm" \ --define "_version $(DPDK_VERSION)" \ --define "_release $(PKG_SUFFIX)" \ $(CURDIR)/rpm/vpp-dpdk.spec mv rpm/RPMS/$(RPM_ARCH)/*.rpm . git clean -fdx rpm build-rpm: $(DEV_RPM) install-rpm: ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) @make $(DEV_RPM) sudo rpm -Uih $(DEV_RPM) else @echo "==========================================================" @echo " Up-to-date DPDK package already installed" @echo "==========================================================" endif check-rpm: ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) @echo "==========================================================" @echo " Outdated DPDK package detected:" @echo " Installed: vpp-dpdk-devel $(INSTALLED_RPM_VER)" @echo " Current: vpp-dpdk-devel $(DPDK_VERSION)-$(PKG_SUFFIX)" @echo "" @echo " Please upgrade by invoking 'make dpdk-install-dev'" @echo " from the top level directory." @echo "==========================================================" endif ############################################################################## # ebuild support ############################################################################## .PHONY: ebuild-build ebuild-install ebuild-build: ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),) @echo "==========================================================" @echo "Building DPDK from source. Consider installing development" @echo "package by invoking 'make dpdk-install-dev' from the" @echo "top level directory" @echo "==========================================================" make config else ifneq ($(INSTALLED_DEB_VER),) make check-deb endif ifneq ($(INSTALLED_RPM_VER),) make check-rpm endif endif ebuild-install: ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),) make install endif