/* * Copyright (c) 2011-2018 Cisco and/or its affiliates. * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef __included_cdp_protocol_h__ #define __included_cdp_protocol_h__ #include /* for ethernet_header_t */ #include #include #include typedef CLIB_PACKED (struct { u8 version; u8 ttl; u16 checksum; /* 1's complement of the 1's complement sum */ u8 data[0]; }) cdp_hdr_t; typedef struct { u8 dst_address[6]; u8 src_address[6]; u16 len; } ethernet_802_3_header_t; typedef CLIB_PACKED (struct { ethernet_802_3_header_t ethernet; llc_header_t llc; snap_header_t snap; cdp_hdr_t cdp; }) ethernet_llc_snap_and_cdp_header_t; typedef CLIB_PACKED (struct { hdlc_header_t hdlc; cdp_hdr_t cdp; }) hdlc_and_cdp_header_t; typedef CLIB_PACKED (struct { srp_header_t srp; ethernet_header_t ethernet; cdp_hdr_t cdp; }) srp_and_cdp_header_t; typedef CLIB_PACKED (struct { u16 t; u16 l; u8 v[0]; }) cdp_tlv_t; /* * TLV codes. */ #define foreach_cdp_tlv_type \ _(unused) \ _(device_name) /* uniquely identifies the device */ \ _(address) /* list of addresses this device has */ \ _(port_id) /* port CDP packet was sent out on */ \ _(capabilities) /* funct. capabilities of the device */ \ _(version) /* version */ \ _(platform) /* hardware platform of this device */ \ _(ipprefix) /* An IP network prefix */ \ _(hello) /* Pprotocol piggyback hello msg */ \ _(vtp_domain) /* VTP management domain */ \ _(native_vlan) /* Native VLAN number */ \ _(duplex) /* The interface duplex mode */ \ _(appl_vlan) /* Appliance VLAN-ID TLV */ \ _(trigger) /* For sending trigger TLV msgs. */ \ _(power) /* Power consumption of that device */ \ _(mtu) /* MTU defined for sending intf. */ \ _(trust) /* Extended trust TLV */ \ _(cos) /* COS for Untrusted Port TLV */ \ _(sysname) /* System name (FQDN of device) */ \ _(sysobject) /* OID of sysObjectID MIB object */ \ _(mgmt_addr) /* SNMP manageable addrs. of device */ \ _(physical_loc) /* Physical Location of the device */ \ _(mgmt_addr2) /* External Port-ID */ \ _(power_requested) \ _(power_available) \ _(port_unidirectional) \ _(unknown_28) \ _(energywise) \ _(unknown_30) \ _(spare_poe) typedef enum { #define _(t) CDP_TLV_##t, foreach_cdp_tlv_type #undef _ } cdp_tlv_code_t; /* The address TLV looks as follows: +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Number of addresses | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | IDRP encoded address | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ An address is encoded in IDRP format: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | PT | PT Length | Protocol (variable) ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Address length | Address (variable) ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ PT: Protocol type 1 = NLPID format 2 = 802.2 format PT Length: Length of protocol field, 1 for PT = 1, and either 3 or 8 for 802.2 format depending if SNAP is used for PT = 2. The encodings for the other protocols have the following format: field: <-------OUI------> | | | | | | | | | bytes: 0 1 2 3 4 5 6 7 8 where the first 3 bytes are 0xAAAA03 for SNAP encoded addresses. The OUI is 000000 for ethernet and is the assigned Ethernet type code for the particular protocol. e.g. for DECnet the encoding is AAAA03 000000 6003. for IPv6 the encoding is AAAA03 000000 86DD */ /* * Capabilities. */ #define CDP_ROUTER_DEVICE 0x0001 #define CDP_TB_DEVICE 0x0002 #define CDP_SRB_DEVICE 0x0004 #define CDP_SWITCH_DEVICE 0x0008 #define CDP_HOST_DEVICE 0x0010 #define CDP_IGMP_DEVICE 0x0020 #define CDP_REPEATER_DEVICE 0x0040 /* The protocol-hello TLV looks as follows: 0 1 2 3 012345678901234567890123456789012345678 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | OUI | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Protocol ID | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | up to 27 bytes of message | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ */ /* * These macros define the valid values for the Duplex TLV. */ #define CDP_DUPLEX_TLV_HALF 0x0 #define CDP_DUPLEX_TLV_FULL 0x1 #endif /* __included_cdp_protocol_h__ */ /* * fd.io coding-style-patch-verification: ON * * Local Variables: * eval: (c-set-style "gnu") * End: */