/*
 * Copyright (c) 2018 Cisco and/or its affiliates.
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at:
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/**
 * @file
 * @brief NAT44 CLI
 */

#include <nat/nat.h>
#include <nat/lib/ipfix_logging.h>
#include <nat/lib/nat_inlines.h>
#include <nat/nat_inlines.h>
#include <nat/nat44/inlines.h>
#include <nat/nat_affinity.h>
#include <vnet/fib/fib_table.h>
#include <nat/nat_ha.h>

#define UNSUPPORTED_IN_ED_MODE_STR \
  "This command is unsupported in endpoint dependent mode"
#define SUPPORTED_ONLY_IN_ED_MODE_STR \
  "This command is supported only in endpoint dependent mode"

static clib_error_t *
nat44_enable_command_fn (vlib_main_t * vm,
			 unformat_input_t * input, vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;

  nat44_config_t c = { 0 };
  u8 mode_set = 0;

  // TODO: check this also inside the function so it can be
  //       safely called from anyplace, also sanity checking required
  if (sm->enabled)
    return clib_error_return (0, "nat44 already enabled");

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    {
      if (nat44_plugin_enable (c) != 0)
	return clib_error_return (0, "nat44 enable failed");
      return 0;
    }

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (!mode_set && unformat (line_input, "static-mapping-only"))
	{
	  mode_set = 1;
	  c.static_mapping_only = 1;
	  if (unformat (line_input, "connection-tracking"))
	    {
	      c.connection_tracking = 1;
	    }
	}
      else if (!mode_set && unformat (line_input, "out2in-dpo"))
	{
	  mode_set = 1;
	  c.out2in_dpo = 1;
	}
      else if (!mode_set && unformat (line_input, "endpoint-dependent"))
	{
	  mode_set = 1;
	  c.endpoint_dependent = 1;
	}
      else if (unformat (input, "inside-vrf %u", &c.inside_vrf));
      else if (unformat (input, "outside-vrf %u", &c.outside_vrf));
      else if (unformat (input, "users %u", &c.users));
      else if (unformat (input, "user-memory %u", &c.user_memory));
      else if (unformat (input, "sessions %u", &c.sessions));
      else if (unformat (input, "session-memory %u", &c.session_memory));
      else if (unformat (input, "user-sessions %u", &c.user_sessions));
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  if (!(c.sessions && c.session_memory))
    {
      error =
	clib_error_return (0,
			   "either number of sessions or size of the memory is required");
      goto done;
    }

  if (nat44_plugin_enable (c) != 0)
    error = clib_error_return (0, "nat44 enable failed");
done:
  unformat_free (line_input);
  return error;
}

static clib_error_t *
nat44_disable_command_fn (vlib_main_t * vm,
			  unformat_input_t * input, vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  clib_error_t *error = 0;

  if (sm->enabled)
    return clib_error_return (0, "nat44 already disabled");

  if (nat44_plugin_disable () != 0)
    error = clib_error_return (0, "nat44 disable failed");

  return error;
}

static clib_error_t *
set_workers_command_fn (vlib_main_t * vm,
			unformat_input_t * input, vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  uword *bitmap = 0;
  int rv = 0;
  clib_error_t *error = 0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%U", unformat_bitmap_list, &bitmap))
	;
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  if (bitmap == 0)
    {
      error = clib_error_return (0, "List of workers must be specified.");
      goto done;
    }

  rv = snat_set_workers (bitmap);

  clib_bitmap_free (bitmap);

  switch (rv)
    {
    case VNET_API_ERROR_INVALID_WORKER:
      error = clib_error_return (0, "Invalid worker(s).");
      goto done;
    case VNET_API_ERROR_FEATURE_DISABLED:
      error = clib_error_return (0,
				 "Supported only if 2 or more workes available.");
      goto done;
    default:
      break;
    }

done:
  unformat_free (line_input);

  return error;
}

static clib_error_t *
nat_show_workers_commnad_fn (vlib_main_t * vm, unformat_input_t * input,
			     vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  u32 *worker;

  if (sm->num_workers > 1)
    {
      vlib_cli_output (vm, "%d workers", vec_len (sm->workers));
      /* *INDENT-OFF* */
      vec_foreach (worker, sm->workers)
        {
          vlib_worker_thread_t *w =
            vlib_worker_threads + *worker + sm->first_worker_index;
          vlib_cli_output (vm, "  %s", w->name);
        }
      /* *INDENT-ON* */
    }

  return 0;
}

static clib_error_t *
snat_set_log_level_command_fn (vlib_main_t * vm,
			       unformat_input_t * input,
			       vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  snat_main_t *sm = &snat_main;
  u8 log_level = SNAT_LOG_NONE;
  clib_error_t *error = 0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  if (!unformat (line_input, "%d", &log_level))
    {
      error = clib_error_return (0, "unknown input '%U'",
				 format_unformat_error, line_input);
      goto done;
    }
  if (log_level > SNAT_LOG_DEBUG)
    {
      error = clib_error_return (0, "unknown logging level '%d'", log_level);
      goto done;
    }
  sm->log_level = log_level;

done:
  unformat_free (line_input);

  return error;
}

static clib_error_t *
snat_ipfix_logging_enable_disable_command_fn (vlib_main_t * vm,
					      unformat_input_t * input,
					      vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  u32 domain_id = 0;
  u32 src_port = 0;
  u8 enable = 1;
  int rv = 0;
  clib_error_t *error = 0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    {
      rv = nat_ipfix_logging_enable_disable (enable, domain_id,
					     (u16) src_port);
      if (rv)
	return clib_error_return (0, "ipfix logging enable failed");
      return 0;
    }

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "domain %d", &domain_id))
	;
      else if (unformat (line_input, "src-port %d", &src_port))
	;
      else if (unformat (line_input, "disable"))
	enable = 0;
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  rv = nat_ipfix_logging_enable_disable (enable, domain_id, (u16) src_port);

  if (rv)
    {
      error = clib_error_return (0, "ipfix logging enable failed");
      goto done;
    }

done:
  unformat_free (line_input);

  return error;
}

static clib_error_t *
nat44_show_hash_command_fn (vlib_main_t * vm, unformat_input_t * input,
			    vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  snat_main_per_thread_data_t *tsm;
  nat_affinity_main_t *nam = &nat_affinity_main;
  int i;
  int verbose = 0;

  if (unformat (input, "detail"))
    verbose = 1;
  else if (unformat (input, "verbose"))
    verbose = 2;

  vlib_cli_output (vm, "%U", format_bihash_8_8, &sm->static_mapping_by_local,
		   verbose);
  vlib_cli_output (vm, "%U",
		   format_bihash_8_8, &sm->static_mapping_by_external,
		   verbose);
  vlib_cli_output (vm, "%U", format_bihash_16_8, &sm->out2in_ed, verbose);
  vec_foreach_index (i, sm->per_thread_data)
  {
    tsm = vec_elt_at_index (sm->per_thread_data, i);
    vlib_cli_output (vm, "-------- thread %d %s --------\n",
		     i, vlib_worker_threads[i].name);
    if (sm->endpoint_dependent)
      {
	vlib_cli_output (vm, "%U", format_bihash_16_8, &tsm->in2out_ed,
			 verbose);
      }
    else
      {
	vlib_cli_output (vm, "%U", format_bihash_8_8, &tsm->in2out, verbose);
	vlib_cli_output (vm, "%U", format_bihash_8_8, &tsm->out2in, verbose);
      }
    vlib_cli_output (vm, "%U", format_bihash_8_8, &tsm->user_hash, verbose);
  }

  if (sm->endpoint_dependent)
    {
      vlib_cli_output (vm, "%U", format_bihash_16_8, &nam->affinity_hash,
		       verbose);
    }

  vlib_cli_output (vm, "-------- hash table parameters --------\n");
  vlib_cli_output (vm, "translation buckets: %u", sm->translation_buckets);
  vlib_cli_output (vm, "translation memory size: %U",
		   format_memory_size, sm->translation_memory_size);
  if (!sm->endpoint_dependent)
    {
      vlib_cli_output (vm, "user buckets: %u", sm->user_buckets);
      vlib_cli_output (vm, "user memory size: %U",
		       format_memory_size, sm->user_memory_size);
    }
  return 0;
}

static clib_error_t *
nat44_set_alloc_addr_and_port_alg_command_fn (vlib_main_t * vm,
					      unformat_input_t * input,
					      vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
  u32 psid, psid_offset, psid_length, port_start, port_end;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "default"))
	nat_set_alloc_addr_and_port_default ();
      else
	if (unformat
	    (line_input, "map-e psid %d psid-offset %d psid-len %d", &psid,
	     &psid_offset, &psid_length))
	nat_set_alloc_addr_and_port_mape ((u16) psid, (u16) psid_offset,
					  (u16) psid_length);
      else
	if (unformat
	    (line_input, "port-range %d - %d", &port_start, &port_end))
	{
	  if (port_end <= port_start)
	    {
	      error =
		clib_error_return (0,
				   "The end-port must be greater than start-port");
	      goto done;
	    }
	  nat_set_alloc_addr_and_port_range ((u16) port_start,
					     (u16) port_end);
	}
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

done:
  unformat_free (line_input);

  return error;
};

static clib_error_t *
nat44_show_alloc_addr_and_port_alg_command_fn (vlib_main_t * vm,
					       unformat_input_t * input,
					       vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;

  vlib_cli_output (vm, "NAT address and port: %U",
		   format_nat_addr_and_port_alloc_alg,
		   sm->addr_and_port_alloc_alg);
  switch (sm->addr_and_port_alloc_alg)
    {
    case NAT_ADDR_AND_PORT_ALLOC_ALG_MAPE:
      vlib_cli_output (vm, "  psid %d psid-offset %d psid-len %d", sm->psid,
		       sm->psid_offset, sm->psid_length);
      break;
    case NAT_ADDR_AND_PORT_ALLOC_ALG_RANGE:
      vlib_cli_output (vm, "  start-port %d end-port %d", sm->start_port,
		       sm->end_port);
      break;
    default:
      break;
    }

  return 0;
}

static clib_error_t *
nat_set_mss_clamping_command_fn (vlib_main_t * vm, unformat_input_t * input,
				 vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  snat_main_t *sm = &snat_main;
  clib_error_t *error = 0;
  u32 mss;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "disable"))
	sm->mss_clamping = 0;
      else if (unformat (line_input, "%d", &mss))
	sm->mss_clamping = (u16) mss;
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

done:
  unformat_free (line_input);

  return error;
}

static clib_error_t *
nat_show_mss_clamping_command_fn (vlib_main_t * vm, unformat_input_t * input,
				  vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;

  if (sm->mss_clamping)
    vlib_cli_output (vm, "mss-clamping %d", sm->mss_clamping);
  else
    vlib_cli_output (vm, "mss-clamping disabled");

  return 0;
}

static clib_error_t *
nat_ha_failover_command_fn (vlib_main_t * vm, unformat_input_t * input,
			    vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  ip4_address_t addr;
  u32 port, session_refresh_interval = 10;
  int rv;
  clib_error_t *error = 0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%U:%u", unformat_ip4_address, &addr, &port))
	;
      else
	if (unformat
	    (line_input, "refresh-interval %u", &session_refresh_interval))
	;
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  rv = nat_ha_set_failover (&addr, (u16) port, session_refresh_interval);
  if (rv)
    error = clib_error_return (0, "set HA failover failed");

done:
  unformat_free (line_input);

  return error;
}

static clib_error_t *
nat_ha_listener_command_fn (vlib_main_t * vm, unformat_input_t * input,
			    vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  ip4_address_t addr;
  u32 port, path_mtu = 512;
  int rv;
  clib_error_t *error = 0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%U:%u", unformat_ip4_address, &addr, &port))
	;
      else if (unformat (line_input, "path-mtu %u", &path_mtu))
	;
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  rv = nat_ha_set_listener (&addr, (u16) port, path_mtu);
  if (rv)
    error = clib_error_return (0, "set HA listener failed");

done:
  unformat_free (line_input);

  return error;
}

static clib_error_t *
nat_show_ha_command_fn (vlib_main_t * vm, unformat_input_t * input,
			vlib_cli_command_t * cmd)
{
  ip4_address_t addr;
  u16 port;
  u32 path_mtu, session_refresh_interval, resync_ack_missed;
  u8 in_resync;

  nat_ha_get_listener (&addr, &port, &path_mtu);
  if (!port)
    {
      vlib_cli_output (vm, "NAT HA disabled\n");
      return 0;
    }

  vlib_cli_output (vm, "LISTENER:\n");
  vlib_cli_output (vm, "  %U:%u path-mtu %u\n",
		   format_ip4_address, &addr, port, path_mtu);

  nat_ha_get_failover (&addr, &port, &session_refresh_interval);
  vlib_cli_output (vm, "FAILOVER:\n");
  if (port)
    vlib_cli_output (vm, "  %U:%u refresh-interval %usec\n",
		     format_ip4_address, &addr, port,
		     session_refresh_interval);
  else
    vlib_cli_output (vm, "  NA\n");

  nat_ha_get_resync_status (&in_resync, &resync_ack_missed);
  vlib_cli_output (vm, "RESYNC:\n");
  if (in_resync)
    vlib_cli_output (vm, "  in progress\n");
  else
    vlib_cli_output (vm, "  completed (%d ACK missed)\n", resync_ack_missed);

  return 0;
}

static clib_error_t *
nat_ha_flush_command_fn (vlib_main_t * vm, unformat_input_t * input,
			 vlib_cli_command_t * cmd)
{
  nat_ha_flush (0);
  return 0;
}

static clib_error_t *
nat_ha_resync_command_fn (vlib_main_t * vm, unformat_input_t * input,
			  vlib_cli_command_t * cmd)
{
  clib_error_t *error = 0;

  if (nat_ha_resync (0, 0, 0))
    error = clib_error_return (0, "NAT HA resync already running");

  return error;
}

static clib_error_t *
add_address_command_fn (vlib_main_t * vm,
			unformat_input_t * input, vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  snat_main_t *sm = &snat_main;
  ip4_address_t start_addr, end_addr, this_addr;
  u32 start_host_order, end_host_order;
  u32 vrf_id = ~0;
  int i, count;
  int is_add = 1;
  int rv = 0;
  clib_error_t *error = 0;
  u8 twice_nat = 0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%U - %U",
		    unformat_ip4_address, &start_addr,
		    unformat_ip4_address, &end_addr))
	;
      else if (unformat (line_input, "tenant-vrf %u", &vrf_id))
	;
      else if (unformat (line_input, "%U", unformat_ip4_address, &start_addr))
	end_addr = start_addr;
      else if (unformat (line_input, "twice-nat"))
	twice_nat = 1;
      else if (unformat (line_input, "del"))
	is_add = 0;
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  if (sm->static_mapping_only)
    {
      error = clib_error_return (0, "static mapping only mode");
      goto done;
    }

  start_host_order = clib_host_to_net_u32 (start_addr.as_u32);
  end_host_order = clib_host_to_net_u32 (end_addr.as_u32);

  if (end_host_order < start_host_order)
    {
      error = clib_error_return (0, "end address less than start address");
      goto done;
    }

  count = (end_host_order - start_host_order) + 1;

  if (count > 1024)
    nat_log_info ("%U - %U, %d addresses...",
		  format_ip4_address, &start_addr,
		  format_ip4_address, &end_addr, count);

  this_addr = start_addr;

  for (i = 0; i < count; i++)
    {
      if (is_add)
	rv = snat_add_address (sm, &this_addr, vrf_id, twice_nat);
      else
	rv = snat_del_address (sm, this_addr, 0, twice_nat);

      switch (rv)
	{
	case VNET_API_ERROR_VALUE_EXIST:
	  error = clib_error_return (0, "NAT address already in use.");
	  goto done;
	case VNET_API_ERROR_NO_SUCH_ENTRY:
	  error = clib_error_return (0, "NAT address not exist.");
	  goto done;
	case VNET_API_ERROR_UNSPECIFIED:
	  error =
	    clib_error_return (0, "NAT address used in static mapping.");
	  goto done;
	case VNET_API_ERROR_FEATURE_DISABLED:
	  error =
	    clib_error_return (0,
			       "twice NAT available only for endpoint-dependent mode.");
	  goto done;
	default:
	  break;
	}

      if (sm->out2in_dpo)
	nat44_add_del_address_dpo (this_addr, is_add);

      increment_v4_address (&this_addr);
    }

done:
  unformat_free (line_input);

  return error;
}

static void
nat44_show_lru_summary (vlib_main_t * vm, snat_main_per_thread_data_t * tsm,
			u64 now, u64 sess_timeout_time)
{
  snat_main_t *sm = &snat_main;
  dlist_elt_t *oldest_elt;
  snat_session_t *s;
  u32 oldest_index;

#define _(n, d)                                                          \
  oldest_index =                                                         \
      clib_dlist_remove_head (tsm->lru_pool, tsm->n##_lru_head_index);   \
  if (~0 != oldest_index)                                                \
    {                                                                    \
      oldest_elt = pool_elt_at_index (tsm->lru_pool, oldest_index);      \
      s = pool_elt_at_index (tsm->sessions, oldest_elt->value);          \
      sess_timeout_time =                                                \
          s->last_heard + (f64)nat44_session_get_timeout (sm, s);        \
      vlib_cli_output (vm, d " LRU min session timeout %llu (now %llu)", \
                       sess_timeout_time, now);                          \
      clib_dlist_addhead (tsm->lru_pool, tsm->n##_lru_head_index,        \
                          oldest_index);                                 \
    }
  _(tcp_estab, "established tcp");
  _(tcp_trans, "transitory tcp");
  _(udp, "udp");
  _(unk_proto, "unknown protocol");
  _(icmp, "icmp");
#undef _
}

static clib_error_t *
nat44_show_summary_command_fn (vlib_main_t * vm, unformat_input_t * input,
			       vlib_cli_command_t * cmd)
{
  snat_main_per_thread_data_t *tsm;
  snat_main_t *sm = &snat_main;
  snat_session_t *s;

  if (!sm->endpoint_dependent)
    return clib_error_return (0, SUPPORTED_ONLY_IN_ED_MODE_STR);

  u32 count = 0;

  u64 now = vlib_time_now (vm);
  u64 sess_timeout_time;

  u32 udp_sessions = 0;
  u32 tcp_sessions = 0;
  u32 icmp_sessions = 0;

  u32 timed_out = 0;
  u32 transitory = 0;
  u32 transitory_wait_closed = 0;
  u32 transitory_closed = 0;
  u32 established = 0;

  u32 fib;

  for (fib = 0; fib < vec_len (sm->max_translations_per_fib); fib++)
    vlib_cli_output (vm, "max translations per thread: %u fib %u",
		     sm->max_translations_per_fib[fib], fib);

  if (sm->num_workers > 1)
    {
      /* *INDENT-OFF* */
      vec_foreach (tsm, sm->per_thread_data)
        {
          pool_foreach (s, tsm->sessions,
          ({
            sess_timeout_time = s->last_heard +
	      (f64) nat44_session_get_timeout (sm, s);
            if (now >= sess_timeout_time)
              timed_out++;

            switch (s->nat_proto)
              {
              case NAT_PROTOCOL_ICMP:
                icmp_sessions++;
                break;
              case NAT_PROTOCOL_TCP:
                tcp_sessions++;
                if (s->state)
                  {
                    if (s->tcp_closed_timestamp)
                      {
                        if (now >= s->tcp_closed_timestamp)
                          {
                            ++transitory_closed;
                          }
                        else
                          {
                            ++transitory_wait_closed;
                          }
                      }
                    transitory++;
                  }
                else
                  established++;
                break;
              case NAT_PROTOCOL_UDP:
              default:
                udp_sessions++;
                break;
              }
          }));
          nat44_show_lru_summary (vm, tsm, now, sess_timeout_time);
          count += pool_elts (tsm->sessions);
        }
      /* *INDENT-ON* */
    }
  else
    {
      tsm = vec_elt_at_index (sm->per_thread_data, sm->num_workers);
      /* *INDENT-OFF* */
      pool_foreach (s, tsm->sessions,
      ({
        sess_timeout_time = s->last_heard +
	    (f64) nat44_session_get_timeout (sm, s);
        if (now >= sess_timeout_time)
          timed_out++;

        switch (s->nat_proto)
          {
          case NAT_PROTOCOL_ICMP:
            icmp_sessions++;
            break;
          case NAT_PROTOCOL_TCP:
            tcp_sessions++;
            if (s->state)
              {
                if (s->tcp_closed_timestamp)
                  {
                    if (now >= s->tcp_closed_timestamp)
                      {
                        ++transitory_closed;
                      }
                    else
                      {
                        ++transitory_wait_closed;
                      }
                  }
                transitory++;
              }
            else
              established++;
            break;
          case NAT_PROTOCOL_UDP:
          default:
            udp_sessions++;
            break;
          }
      }));
      /* *INDENT-ON* */
      nat44_show_lru_summary (vm, tsm, now, sess_timeout_time);
      count = pool_elts (tsm->sessions);
    }

  vlib_cli_output (vm, "total timed out sessions: %u", timed_out);
  vlib_cli_output (vm, "total sessions: %u", count);
  vlib_cli_output (vm, "total tcp sessions: %u", tcp_sessions);
  vlib_cli_output (vm, "total tcp established sessions: %u", established);
  vlib_cli_output (vm, "total tcp transitory sessions: %u", transitory);
  vlib_cli_output (vm, "total tcp transitory (WAIT-CLOSED) sessions: %u",
		   transitory_wait_closed);
  vlib_cli_output (vm, "total tcp transitory (CLOSED) sessions: %u",
		   transitory_closed);
  vlib_cli_output (vm, "total udp sessions: %u", udp_sessions);
  vlib_cli_output (vm, "total icmp sessions: %u", icmp_sessions);
  return 0;
}

static clib_error_t *
nat44_show_addresses_command_fn (vlib_main_t * vm, unformat_input_t * input,
				 vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  snat_address_t *ap;

  vlib_cli_output (vm, "NAT44 pool addresses:");
  /* *INDENT-OFF* */
  vec_foreach (ap, sm->addresses)
    {
      vlib_cli_output (vm, "%U", format_ip4_address, &ap->addr);
      if (ap->fib_index != ~0)
          vlib_cli_output (vm, "  tenant VRF: %u",
            fib_table_get(ap->fib_index, FIB_PROTOCOL_IP4)->ft_table_id);
      else
        vlib_cli_output (vm, "  tenant VRF independent");
    #define _(N, i, n, s) \
      vlib_cli_output (vm, "  %d busy %s ports", ap->busy_##n##_ports, s);
      foreach_nat_protocol
    #undef _
    }
  vlib_cli_output (vm, "NAT44 twice-nat pool addresses:");
  vec_foreach (ap, sm->twice_nat_addresses)
    {
      vlib_cli_output (vm, "%U", format_ip4_address, &ap->addr);
      if (ap->fib_index != ~0)
          vlib_cli_output (vm, "  tenant VRF: %u",
            fib_table_get(ap->fib_index, FIB_PROTOCOL_IP4)->ft_table_id);
      else
        vlib_cli_output (vm, "  tenant VRF independent");
    #define _(N, i, n, s) \
      vlib_cli_output (vm, "  %d busy %s ports", ap->busy_##n##_ports, s);
      foreach_nat_protocol
    #undef _
    }
  /* *INDENT-ON* */
  return 0;
}

static clib_error_t *
snat_feature_command_fn (vlib_main_t * vm,
			 unformat_input_t * input, vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  vnet_main_t *vnm = vnet_get_main ();
  clib_error_t *error = 0;
  u32 sw_if_index;
  u32 *inside_sw_if_indices = 0;
  u32 *outside_sw_if_indices = 0;
  u8 is_output_feature = 0;
  int is_del = 0;
  int i;

  sw_if_index = ~0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "in %U", unformat_vnet_sw_interface,
		    vnm, &sw_if_index))
	vec_add1 (inside_sw_if_indices, sw_if_index);
      else if (unformat (line_input, "out %U", unformat_vnet_sw_interface,
			 vnm, &sw_if_index))
	vec_add1 (outside_sw_if_indices, sw_if_index);
      else if (unformat (line_input, "output-feature"))
	is_output_feature = 1;
      else if (unformat (line_input, "del"))
	is_del = 1;
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  if (vec_len (inside_sw_if_indices))
    {
      for (i = 0; i < vec_len (inside_sw_if_indices); i++)
	{
	  sw_if_index = inside_sw_if_indices[i];
	  if (is_output_feature)
	    {
	      if (snat_interface_add_del_output_feature
		  (sw_if_index, 1, is_del))
		{
		  error = clib_error_return (0, "%s %U failed",
					     is_del ? "del" : "add",
					     format_vnet_sw_if_index_name,
					     vnm, sw_if_index);
		  goto done;
		}
	    }
	  else
	    {
	      if (snat_interface_add_del (sw_if_index, 1, is_del))
		{
		  error = clib_error_return (0, "%s %U failed",
					     is_del ? "del" : "add",
					     format_vnet_sw_if_index_name,
					     vnm, sw_if_index);
		  goto done;
		}
	    }
	}
    }

  if (vec_len (outside_sw_if_indices))
    {
      for (i = 0; i < vec_len (outside_sw_if_indices); i++)
	{
	  sw_if_index = outside_sw_if_indices[i];
	  if (is_output_feature)
	    {
	      if (snat_interface_add_del_output_feature
		  (sw_if_index, 0, is_del))
		{
		  error = clib_error_return (0, "%s %U failed",
					     is_del ? "del" : "add",
					     format_vnet_sw_if_index_name,
					     vnm, sw_if_index);
		  goto done;
		}
	    }
	  else
	    {
	      if (snat_interface_add_del (sw_if_index, 0, is_del))
		{
		  error = clib_error_return (0, "%s %U failed",
					     is_del ? "del" : "add",
					     format_vnet_sw_if_index_name,
					     vnm, sw_if_index);
		  goto done;
		}
	    }
	}
    }

done:
  unformat_free (line_input);
  vec_free (inside_sw_if_indices);
  vec_free (outside_sw_if_indices);

  return error;
}

static clib_error_t *
nat44_show_interfaces_command_fn (vlib_main_t * vm, unformat_input_t * input,
				  vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  snat_interface_t *i;
  vnet_main_t *vnm = vnet_get_main ();

  vlib_cli_output (vm, "NAT44 interfaces:");
  /* *INDENT-OFF* */
  pool_foreach (i, sm->interfaces,
  ({
    vlib_cli_output (vm, " %U %s", format_vnet_sw_if_index_name, vnm,
                     i->sw_if_index,
                     (nat_interface_is_inside(i) &&
                      nat_interface_is_outside(i)) ? "in out" :
                     (nat_interface_is_inside(i) ? "in" : "out"));
  }));

  pool_foreach (i, sm->output_feature_interfaces,
  ({
    vlib_cli_output (vm, " %U output-feature %s",
                     format_vnet_sw_if_index_name, vnm,
                     i->sw_if_index,
                     (nat_interface_is_inside(i) &&
                      nat_interface_is_outside(i)) ? "in out" :
                     (nat_interface_is_inside(i) ? "in" : "out"));
  }));
  /* *INDENT-ON* */

  return 0;
}

static clib_error_t *
add_static_mapping_command_fn (vlib_main_t * vm,
			       unformat_input_t * input,
			       vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
  ip4_address_t l_addr, e_addr, exact_addr;
  u32 l_port = 0, e_port = 0, vrf_id = ~0;
  int is_add = 1, addr_only = 1, rv, exact = 0;
  u32 sw_if_index = ~0;
  vnet_main_t *vnm = vnet_get_main ();
  nat_protocol_t proto = NAT_PROTOCOL_OTHER;
  u8 proto_set = 0;
  twice_nat_type_t twice_nat = TWICE_NAT_DISABLED;
  u8 out2in_only = 0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "local %U %u", unformat_ip4_address, &l_addr,
		    &l_port))
	addr_only = 0;
      else
	if (unformat (line_input, "local %U", unformat_ip4_address, &l_addr))
	;
      else if (unformat (line_input, "external %U %u", unformat_ip4_address,
			 &e_addr, &e_port))
	addr_only = 0;
      else if (unformat (line_input, "external %U", unformat_ip4_address,
			 &e_addr))
	;
      else if (unformat (line_input, "external %U %u",
			 unformat_vnet_sw_interface, vnm, &sw_if_index,
			 &e_port))
	addr_only = 0;
      else if (unformat (line_input, "external %U",
			 unformat_vnet_sw_interface, vnm, &sw_if_index))
	;
      else if (unformat (line_input, "exact %U", unformat_ip4_address,
			 &exact_addr))
	exact = 1;
      else if (unformat (line_input, "vrf %u", &vrf_id))
	;
      else if (unformat (line_input, "%U", unformat_nat_protocol, &proto))
	proto_set = 1;
      else if (unformat (line_input, "twice-nat"))
	twice_nat = TWICE_NAT;
      else if (unformat (line_input, "self-twice-nat"))
	twice_nat = TWICE_NAT_SELF;
      else if (unformat (line_input, "out2in-only"))
	out2in_only = 1;
      else if (unformat (line_input, "del"))
	is_add = 0;
      else
	{
	  error = clib_error_return (0, "unknown input: '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  if (twice_nat && addr_only)
    {
      error = clib_error_return (0, "twice NAT only for 1:1 NAPT");
      goto done;
    }

  if (addr_only)
    {
      if (proto_set)
	{
	  error =
	    clib_error_return (0,
			       "address only mapping doesn't support protocol");
	  goto done;
	}
    }
  else if (!proto_set)
    {
      error = clib_error_return (0, "protocol is required");
      goto done;
    }

  rv = snat_add_static_mapping (l_addr, e_addr, clib_host_to_net_u16 (l_port),
				clib_host_to_net_u16 (e_port),
				vrf_id, addr_only, sw_if_index, proto, is_add,
				twice_nat, out2in_only, 0, 0, exact_addr,
				exact);

  switch (rv)
    {
    case VNET_API_ERROR_INVALID_VALUE:
      error = clib_error_return (0, "External port already in use.");
      goto done;
    case VNET_API_ERROR_NO_SUCH_ENTRY:
      if (is_add)
	error = clib_error_return (0, "External address must be allocated.");
      else
	error = clib_error_return (0, "Mapping not exist.");
      goto done;
    case VNET_API_ERROR_NO_SUCH_FIB:
      error = clib_error_return (0, "No such VRF id.");
      goto done;
    case VNET_API_ERROR_VALUE_EXIST:
      error = clib_error_return (0, "Mapping already exist.");
      goto done;
    case VNET_API_ERROR_FEATURE_DISABLED:
      error =
	clib_error_return (0,
			   "twice-nat/out2in-only available only for endpoint-dependent mode.");
      goto done;
    default:
      break;
    }

done:
  unformat_free (line_input);

  return error;
}

static clib_error_t *
add_identity_mapping_command_fn (vlib_main_t * vm,
				 unformat_input_t * input,
				 vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
  ip4_address_t addr, pool_addr = { 0 };
  u32 port = 0, vrf_id = ~0;
  int is_add = 1;
  int addr_only = 1;
  u32 sw_if_index = ~0;
  vnet_main_t *vnm = vnet_get_main ();
  int rv;
  nat_protocol_t proto;

  addr.as_u32 = 0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%U", unformat_ip4_address, &addr))
	;
      else if (unformat (line_input, "external %U",
			 unformat_vnet_sw_interface, vnm, &sw_if_index))
	;
      else if (unformat (line_input, "vrf %u", &vrf_id))
	;
      else if (unformat (line_input, "%U %u", unformat_nat_protocol, &proto,
			 &port))
	addr_only = 0;
      else if (unformat (line_input, "del"))
	is_add = 0;
      else
	{
	  error = clib_error_return (0, "unknown input: '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  rv =
    snat_add_static_mapping (addr, addr, clib_host_to_net_u16 (port),
			     clib_host_to_net_u16 (port), vrf_id, addr_only,
			     sw_if_index, proto, is_add, 0, 0, 0, 1,
			     pool_addr, 0);

  switch (rv)
    {
    case VNET_API_ERROR_INVALID_VALUE:
      error = clib_error_return (0, "External port already in use.");
      goto done;
    case VNET_API_ERROR_NO_SUCH_ENTRY:
      if (is_add)
	error = clib_error_return (0, "External address must be allocated.");
      else
	error = clib_error_return (0, "Mapping not exist.");
      goto done;
    case VNET_API_ERROR_NO_SUCH_FIB:
      error = clib_error_return (0, "No such VRF id.");
      goto done;
    case VNET_API_ERROR_VALUE_EXIST:
      error = clib_error_return (0, "Mapping already exist.");
      goto done;
    default:
      break;
    }

done:
  unformat_free (line_input);

  return error;
}

static clib_error_t *
add_lb_static_mapping_command_fn (vlib_main_t * vm,
				  unformat_input_t * input,
				  vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
  ip4_address_t l_addr, e_addr;
  u32 l_port = 0, e_port = 0, vrf_id = 0, probability = 0, affinity = 0;
  int is_add = 1;
  int rv;
  nat_protocol_t proto;
  u8 proto_set = 0;
  nat44_lb_addr_port_t *locals = 0, local;
  twice_nat_type_t twice_nat = TWICE_NAT_DISABLED;
  u8 out2in_only = 0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "local %U:%u probability %u",
		    unformat_ip4_address, &l_addr, &l_port, &probability))
	{
	  clib_memset (&local, 0, sizeof (local));
	  local.addr = l_addr;
	  local.port = (u16) l_port;
	  local.probability = (u8) probability;
	  vec_add1 (locals, local);
	}
      else if (unformat (line_input, "local %U:%u vrf %u probability %u",
			 unformat_ip4_address, &l_addr, &l_port, &vrf_id,
			 &probability))
	{
	  clib_memset (&local, 0, sizeof (local));
	  local.addr = l_addr;
	  local.port = (u16) l_port;
	  local.probability = (u8) probability;
	  local.vrf_id = vrf_id;
	  vec_add1 (locals, local);
	}
      else if (unformat (line_input, "external %U:%u", unformat_ip4_address,
			 &e_addr, &e_port))
	;
      else if (unformat (line_input, "protocol %U", unformat_nat_protocol,
			 &proto))
	proto_set = 1;
      else if (unformat (line_input, "twice-nat"))
	twice_nat = TWICE_NAT;
      else if (unformat (line_input, "self-twice-nat"))
	twice_nat = TWICE_NAT_SELF;
      else if (unformat (line_input, "out2in-only"))
	out2in_only = 1;
      else if (unformat (line_input, "del"))
	is_add = 0;
      else if (unformat (line_input, "affinity %u", &affinity))
	;
      else
	{
	  error = clib_error_return (0, "unknown input: '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  if (vec_len (locals) < 2)
    {
      error = clib_error_return (0, "at least two local must be set");
      goto done;
    }

  if (!proto_set)
    {
      error = clib_error_return (0, "missing protocol");
      goto done;
    }

  rv = nat44_add_del_lb_static_mapping (e_addr, (u16) e_port, proto, locals,
					is_add, twice_nat, out2in_only, 0,
					affinity);

  switch (rv)
    {
    case VNET_API_ERROR_INVALID_VALUE:
      error = clib_error_return (0, "External port already in use.");
      goto done;
    case VNET_API_ERROR_NO_SUCH_ENTRY:
      if (is_add)
	error = clib_error_return (0, "External address must be allocated.");
      else
	error = clib_error_return (0, "Mapping not exist.");
      goto done;
    case VNET_API_ERROR_VALUE_EXIST:
      error = clib_error_return (0, "Mapping already exist.");
      goto done;
    case VNET_API_ERROR_FEATURE_DISABLED:
      error =
	clib_error_return (0, "Available only for endpoint-dependent mode.");
      goto done;
    default:
      break;
    }

done:
  unformat_free (line_input);
  vec_free (locals);

  return error;
}

static clib_error_t *
add_lb_backend_command_fn (vlib_main_t * vm,
			   unformat_input_t * input, vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
  ip4_address_t l_addr, e_addr;
  u32 l_port = 0, e_port = 0, vrf_id = 0, probability = 0;
  int is_add = 1;
  int rv;
  nat_protocol_t proto;
  u8 proto_set = 0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "local %U:%u probability %u",
		    unformat_ip4_address, &l_addr, &l_port, &probability))
	;
      else if (unformat (line_input, "local %U:%u vrf %u probability %u",
			 unformat_ip4_address, &l_addr, &l_port, &vrf_id,
			 &probability))
	;
      else if (unformat (line_input, "external %U:%u", unformat_ip4_address,
			 &e_addr, &e_port))
	;
      else if (unformat (line_input, "protocol %U", unformat_nat_protocol,
			 &proto))
	proto_set = 1;
      else if (unformat (line_input, "del"))
	is_add = 0;
      else
	{
	  error = clib_error_return (0, "unknown input: '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  if (!l_port || !e_port)
    {
      error = clib_error_return (0, "local or external must be set");
      goto done;
    }

  if (!proto_set)
    {
      error = clib_error_return (0, "missing protocol");
      goto done;
    }

  rv =
    nat44_lb_static_mapping_add_del_local (e_addr, (u16) e_port, l_addr,
					   l_port, proto, vrf_id, probability,
					   is_add);

  switch (rv)
    {
    case VNET_API_ERROR_INVALID_VALUE:
      error = clib_error_return (0, "External is not load-balancing static "
				 "mapping.");
      goto done;
    case VNET_API_ERROR_NO_SUCH_ENTRY:
      error = clib_error_return (0, "Mapping or back-end not exist.");
      goto done;
    case VNET_API_ERROR_VALUE_EXIST:
      error = clib_error_return (0, "Back-end already exist.");
      goto done;
    case VNET_API_ERROR_FEATURE_DISABLED:
      error =
	clib_error_return (0, "Available only for endpoint-dependent mode.");
      goto done;
    case VNET_API_ERROR_UNSPECIFIED:
      error = clib_error_return (0, "At least two back-ends must remain");
      goto done;
    default:
      break;
    }

done:
  unformat_free (line_input);

  return error;
}

static clib_error_t *
nat44_show_static_mappings_command_fn (vlib_main_t * vm,
				       unformat_input_t * input,
				       vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  snat_static_mapping_t *m;
  snat_static_map_resolve_t *rp;

  vlib_cli_output (vm, "NAT44 static mappings:");
  /* *INDENT-OFF* */
  pool_foreach (m, sm->static_mappings,
  ({
    vlib_cli_output (vm, " %U", format_snat_static_mapping, m);
  }));
  vec_foreach (rp, sm->to_resolve)
    vlib_cli_output (vm, " %U", format_snat_static_map_to_resolve, rp);
  /* *INDENT-ON* */

  return 0;
}

static clib_error_t *
snat_add_interface_address_command_fn (vlib_main_t * vm,
				       unformat_input_t * input,
				       vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  unformat_input_t _line_input, *line_input = &_line_input;
  u32 sw_if_index;
  int rv;
  int is_del = 0;
  clib_error_t *error = 0;
  u8 twice_nat = 0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%U", unformat_vnet_sw_interface,
		    sm->vnet_main, &sw_if_index))
	;
      else if (unformat (line_input, "twice-nat"))
	twice_nat = 1;
      else if (unformat (line_input, "del"))
	is_del = 1;
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  rv = snat_add_interface_address (sm, sw_if_index, is_del, twice_nat);

  switch (rv)
    {
    case 0:
      break;

    default:
      error = clib_error_return (0, "snat_add_interface_address returned %d",
				 rv);
      goto done;
    }

done:
  unformat_free (line_input);

  return error;
}

static clib_error_t *
nat44_show_interface_address_command_fn (vlib_main_t * vm,
					 unformat_input_t * input,
					 vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  vnet_main_t *vnm = vnet_get_main ();
  u32 *sw_if_index;

  /* *INDENT-OFF* */
  vlib_cli_output (vm, "NAT44 pool address interfaces:");
  vec_foreach (sw_if_index, sm->auto_add_sw_if_indices)
    {
      vlib_cli_output (vm, " %U", format_vnet_sw_if_index_name, vnm,
                       *sw_if_index);
    }
  vlib_cli_output (vm, "NAT44 twice-nat pool address interfaces:");
  vec_foreach (sw_if_index, sm->auto_add_sw_if_indices_twice_nat)
    {
      vlib_cli_output (vm, " %U", format_vnet_sw_if_index_name, vnm,
                       *sw_if_index);
    }
  /* *INDENT-ON* */

  return 0;
}

static clib_error_t *
nat44_show_sessions_command_fn (vlib_main_t * vm, unformat_input_t * input,
				vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;

  snat_main_per_thread_data_t *tsm;
  snat_main_t *sm = &snat_main;

  int detail = 0;
  int i = 0;

  if (!unformat_user (input, unformat_line_input, line_input))
    goto print;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "detail"))
	detail = 1;
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  break;
	}
    }
  unformat_free (line_input);

print:
  if (!sm->endpoint_dependent)
    vlib_cli_output (vm, "NAT44 sessions:");
  else
    vlib_cli_output (vm, "NAT44 ED sessions:");

  /* *INDENT-OFF* */
  vec_foreach_index (i, sm->per_thread_data)
    {
      tsm = vec_elt_at_index (sm->per_thread_data, i);

      vlib_cli_output (vm, "-------- thread %d %s: %d sessions --------\n",
                       i, vlib_worker_threads[i].name,
                       pool_elts (tsm->sessions));

      if (!sm->endpoint_dependent)
        {
          snat_user_t *u;
          pool_foreach (u, tsm->users,
          ({
            vlib_cli_output (vm, "  %U", format_snat_user, tsm, u, detail);
          }));
        }
      else
        {
          snat_session_t *s;
          pool_foreach (s, tsm->sessions,
          ({
            vlib_cli_output (vm, "  %U\n", format_snat_session, tsm, s);
          }));
        }
    }
  /* *INDENT-ON* */
  return error;
}

static clib_error_t *
nat44_set_session_limit_command_fn (vlib_main_t * vm,
				    unformat_input_t * input,
				    vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;

  u32 session_limit = 0, vrf_id = 0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%u", &session_limit))
	;
      else if (unformat (line_input, "vrf %u", &vrf_id))
	;
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  if (!session_limit)
    error = clib_error_return (0, "missing value of session limit");
  else if (nat44_update_session_limit (session_limit, vrf_id))
    error = clib_error_return (0, "nat44_set_session_limit failed");

done:
  unformat_free (line_input);

  return error;
}

static clib_error_t *
nat44_del_user_command_fn (vlib_main_t * vm,
			   unformat_input_t * input, vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
  ip4_address_t addr;
  u32 fib_index = 0;
  int rv;

  if (sm->endpoint_dependent)
    return clib_error_return (0, UNSUPPORTED_IN_ED_MODE_STR);

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%U", unformat_ip4_address, &addr))
	;
      else if (unformat (line_input, "fib %u", &fib_index))
	;
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  rv = nat44_user_del (&addr, fib_index);

  if (!rv)
    {
      error = clib_error_return (0, "nat44_user_del returned %d", rv);
    }

done:
  unformat_free (line_input);

  return error;
}

static clib_error_t *
nat44_clear_sessions_command_fn (vlib_main_t * vm,
				 unformat_input_t * input,
				 vlib_cli_command_t * cmd)
{
  clib_error_t *error = 0;
  nat44_sessions_clear ();
  return error;
}

static clib_error_t *
nat44_del_session_command_fn (vlib_main_t * vm,
			      unformat_input_t * input,
			      vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  unformat_input_t _line_input, *line_input = &_line_input;
  int is_in = 0, is_ed = 0;
  clib_error_t *error = 0;
  ip4_address_t addr, eh_addr;
  u32 port = 0, eh_port = 0, vrf_id = sm->outside_vrf_id;
  nat_protocol_t proto;
  int rv;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat
	  (line_input, "%U:%u %U", unformat_ip4_address, &addr, &port,
	   unformat_nat_protocol, &proto))
	;
      else if (unformat (line_input, "in"))
	{
	  is_in = 1;
	  vrf_id = sm->inside_vrf_id;
	}
      else if (unformat (line_input, "out"))
	{
	  is_in = 0;
	  vrf_id = sm->outside_vrf_id;
	}
      else if (unformat (line_input, "vrf %u", &vrf_id))
	;
      else
	if (unformat
	    (line_input, "external-host %U:%u", unformat_ip4_address,
	     &eh_addr, &eh_port))
	is_ed = 1;
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  if (is_ed)
    rv =
      nat44_del_ed_session (sm, &addr, clib_host_to_net_u16 (port), &eh_addr,
			    clib_host_to_net_u16 (eh_port),
			    nat_proto_to_ip_proto (proto), vrf_id, is_in);
  else
    rv =
      nat44_del_session (sm, &addr, clib_host_to_net_u16 (port), proto,
			 vrf_id, is_in);

  switch (rv)
    {
    case 0:
      break;

    default:
      error = clib_error_return (0, "nat44_del_session returned %d", rv);
      goto done;
    }

done:
  unformat_free (line_input);

  return error;
}

static clib_error_t *
snat_forwarding_set_command_fn (vlib_main_t * vm,
				unformat_input_t * input,
				vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  unformat_input_t _line_input, *line_input = &_line_input;
  u8 forwarding_enable;
  u8 forwarding_enable_set = 0;
  clib_error_t *error = 0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, "'enable' or 'disable' expected");

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (!forwarding_enable_set && unformat (line_input, "enable"))
	{
	  forwarding_enable = 1;
	  forwarding_enable_set = 1;
	}
      else if (!forwarding_enable_set && unformat (line_input, "disable"))
	{
	  forwarding_enable = 0;
	  forwarding_enable_set = 1;
	}
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }

  if (!forwarding_enable_set)
    {
      error = clib_error_return (0, "'enable' or 'disable' expected");
      goto done;
    }

  sm->forwarding_enabled = forwarding_enable;

done:
  unformat_free (line_input);

  return error;
}

static clib_error_t *
set_timeout_command_fn (vlib_main_t * vm,
			unformat_input_t * input, vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "udp %u", &sm->udp_timeout));
      else if (unformat (line_input, "tcp-established %u",
			 &sm->tcp_established_timeout));
      else if (unformat (line_input, "tcp-transitory %u",
			 &sm->tcp_transitory_timeout));
      else if (unformat (line_input, "icmp %u", &sm->icmp_timeout));
      else if (unformat (line_input, "reset"))
	{
	  sm->udp_timeout = SNAT_UDP_TIMEOUT;
	  sm->tcp_established_timeout = SNAT_TCP_ESTABLISHED_TIMEOUT;
	  sm->tcp_transitory_timeout = SNAT_TCP_TRANSITORY_TIMEOUT;
	  sm->icmp_timeout = SNAT_ICMP_TIMEOUT;
	}
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }
done:
  unformat_free (line_input);
  return error;
}

static clib_error_t *
nat_show_timeouts_command_fn (vlib_main_t * vm,
			      unformat_input_t * input,
			      vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;

  vlib_cli_output (vm, "udp timeout: %dsec", sm->udp_timeout);
  vlib_cli_output (vm, "tcp-established timeout: %dsec",
		   sm->tcp_established_timeout);
  vlib_cli_output (vm, "tcp-transitory timeout: %dsec",
		   sm->tcp_transitory_timeout);
  vlib_cli_output (vm, "icmp timeout: %dsec", sm->icmp_timeout);

  return 0;
}

static clib_error_t *
nat44_debug_fib_expire_command_fn (vlib_main_t * vm,
				   unformat_input_t * input,
				   vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
  u32 fib = ~0;

  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return 0;

  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%u", &fib))
	;
      else
	{
	  error = clib_error_return (0, "unknown input '%U'",
				     format_unformat_error, line_input);
	  goto done;
	}
    }
  expire_per_vrf_sessions (fib);
done:
  unformat_free (line_input);
  return error;
}

static clib_error_t *
nat44_debug_fib_registration_command_fn (vlib_main_t * vm,
					 unformat_input_t * input,
					 vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  snat_main_per_thread_data_t *tsm;
  per_vrf_sessions_t *per_vrf_sessions;

  vlib_cli_output (vm, "VRF registration debug:");
  vec_foreach (tsm, sm->per_thread_data)
  {
    vlib_cli_output (vm, "thread %u:", tsm->thread_index);
    vec_foreach (per_vrf_sessions, tsm->per_vrf_sessions_vec)
    {
      vlib_cli_output (vm, "rx fib %u tx fib %u ses count %u %s",
		       per_vrf_sessions->rx_fib_index,
		       per_vrf_sessions->tx_fib_index,
		       per_vrf_sessions->ses_count,
		       per_vrf_sessions->expired ? "expired" : "");
    }
  }
  return 0;
}

/* *INDENT-OFF* */

/*?
?*/
VLIB_CLI_COMMAND (nat44_debug_fib_expire_command, static) = {
  .path = "debug nat44 fib expire",
  .short_help = "debug nat44 fib expire <fib-index>",
  .function = nat44_debug_fib_expire_command_fn,
};

/*?
?*/
VLIB_CLI_COMMAND (nat44_debug_fib_registration_command, static) = {
  .path = "debug nat44 fib registration",
  .short_help = "debug nat44 fib registration",
  .function = nat44_debug_fib_registration_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{nat44 enable}
 * Enable nat44 plugin
 * To enable nat44, use:
 *  vpp# nat44 enable sessions <n>
 * To enable nat44 static mapping only, use:
 *  vpp# nat44 enable sessions <n> static-mapping
 * To enable nat44 static mapping with connection tracking, use:
 *  vpp# nat44 enable sessions <n> static-mapping connection-tracking
 * To enable nat44 out2in dpo, use:
 *  vpp# nat44 enable sessions <n> out2in-dpo
 * To enable nat44 endpoint-dependent, use:
 *  vpp# nat44 enable sessions <n> endpoint-dependent
 * To overwrite user hash configuration, use:
 *  vpp# nat44 enable sessions <n> user-memory <n>
 * To overwrite session hash configuration, use:
 *  vpp# nat44 enable session-memory <n>
 * To set inside-vrf outside-vrf, use:
 *  vpp# nat44 enable sessions <n> inside-vrf <id> outside-vrf <id>
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_enable_command, static) = {
  .path = "nat44 enable",
  .short_help = "nat44 enable sessions <max-number> [users <max-number>] [static-mappig-only [connection-tracking]|out2in-dpo|endpoint-dependent] [inside-vrf <vrf-id>] [outside-vrf <vrf-id>] [user-memory <number>] [session-memory <number>] [user-sessions <max-number>]",
  .function = nat44_enable_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{nat44 disable}
 * Disable nat44 plugin
 * To disable nat44, use:
 *  vpp# nat44 disable
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_disable_command, static) = {
  .path = "nat44 disable",
  .short_help = "nat44 disable",
  .function = nat44_disable_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{set snat workers}
 * Set NAT workers if 2 or more workers available, use:
 *  vpp# set snat workers 0-2,5
 * @cliexend
?*/
VLIB_CLI_COMMAND (set_workers_command, static) = {
  .path = "set nat workers",
  .function = set_workers_command_fn,
  .short_help = "set nat workers <workers-list>",
};

/*?
 * @cliexpar
 * @cliexstart{show nat workers}
 * Show NAT workers.
 *  vpp# show nat workers:
 *  2 workers
 *    vpp_wk_0
 *    vpp_wk_1
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat_show_workers_command, static) = {
  .path = "show nat workers",
  .short_help = "show nat workers",
  .function = nat_show_workers_commnad_fn,
};

/*?
 * @cliexpar
 * @cliexstart{set nat timeout}
 * Set values of timeouts for NAT sessions (in seconds), use:
 *  vpp# set nat timeout udp 120 tcp-established 7500 tcp-transitory 250 icmp 90
 * To reset default values use:
 *  vpp# set nat timeout reset
 * @cliexend
?*/
VLIB_CLI_COMMAND (set_timeout_command, static) = {
  .path = "set nat timeout",
  .function = set_timeout_command_fn,
  .short_help =
    "set nat timeout [udp <sec> | tcp-established <sec> "
    "tcp-transitory <sec> | icmp <sec> | reset]",
};

/*?
 * @cliexpar
 * @cliexstart{show nat timeouts}
 * Show values of timeouts for NAT sessions.
 * vpp# show nat timeouts
 * udp timeout: 300sec
 * tcp-established timeout: 7440sec
 * tcp-transitory timeout: 240sec
 * icmp timeout: 60sec
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat_show_timeouts_command, static) = {
  .path = "show nat timeouts",
  .short_help = "show nat timeouts",
  .function = nat_show_timeouts_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{nat set logging level}
 * To set NAT logging level use:
 * Set nat logging level
 * @cliexend
?*/
VLIB_CLI_COMMAND (snat_set_log_level_command, static) = {
  .path = "nat set logging level",
  .function = snat_set_log_level_command_fn,
  .short_help = "nat set logging level <level>",
};

/*?
 * @cliexpar
 * @cliexstart{snat ipfix logging}
 * To enable NAT IPFIX logging use:
 *  vpp# nat ipfix logging
 * To set IPFIX exporter use:
 *  vpp# set ipfix exporter collector 10.10.10.3 src 10.10.10.1
 * @cliexend
?*/
VLIB_CLI_COMMAND (snat_ipfix_logging_enable_disable_command, static) = {
  .path = "nat ipfix logging",
  .function = snat_ipfix_logging_enable_disable_command_fn,
  .short_help = "nat ipfix logging [domain <domain-id>] [src-port <port>] [disable]",
};

/*?
 * @cliexpar
 * @cliexstart{nat addr-port-assignment-alg}
 * Set address and port assignment algorithm
 * For the MAP-E CE limit port choice based on PSID use:
 *  vpp# nat addr-port-assignment-alg map-e psid 10 psid-offset 6 psid-len 6
 * For port range use:
 *  vpp# nat addr-port-assignment-alg port-range <start-port> - <end-port>
 * To set standard (default) address and port assignment algorithm use:
 *  vpp# nat addr-port-assignment-alg default
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_set_alloc_addr_and_port_alg_command, static) = {
    .path = "nat addr-port-assignment-alg",
    .short_help = "nat addr-port-assignment-alg <alg-name> [<alg-params>]",
    .function = nat44_set_alloc_addr_and_port_alg_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{show nat addr-port-assignment-alg}
 * Show address and port assignment algorithm
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_alloc_addr_and_port_alg_command, static) = {
    .path = "show nat addr-port-assignment-alg",
    .short_help = "show nat addr-port-assignment-alg",
    .function = nat44_show_alloc_addr_and_port_alg_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{nat mss-clamping}
 * Set TCP MSS rewriting configuration
 * To enable TCP MSS rewriting use:
 *  vpp# nat mss-clamping 1452
 * To disbale TCP MSS rewriting use:
 *  vpp# nat mss-clamping disable
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat_set_mss_clamping_command, static) = {
    .path = "nat mss-clamping",
    .short_help = "nat mss-clamping <mss-value>|disable",
    .function = nat_set_mss_clamping_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{show nat mss-clamping}
 * Show TCP MSS rewriting configuration
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat_show_mss_clamping_command, static) = {
    .path = "show nat mss-clamping",
    .short_help = "show nat mss-clamping",
    .function = nat_show_mss_clamping_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{nat ha failover}
 * Set HA failover (remote settings)
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat_ha_failover_command, static) = {
    .path = "nat ha failover",
    .short_help = "nat ha failover <ip4-address>:<port> [refresh-interval <sec>]",
    .function = nat_ha_failover_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{nat ha listener}
 * Set HA listener (local settings)
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat_ha_listener_command, static) = {
    .path = "nat ha listener",
    .short_help = "nat ha listener <ip4-address>:<port> [path-mtu <path-mtu>]",
    .function = nat_ha_listener_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{show nat ha}
 * Show HA configuration/status
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat_show_ha_command, static) = {
    .path = "show nat ha",
    .short_help = "show nat ha",
    .function = nat_show_ha_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{nat ha flush}
 * Flush the current HA data (for testing)
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat_ha_flush_command, static) = {
    .path = "nat ha flush",
    .short_help = "nat ha flush",
    .function = nat_ha_flush_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{nat ha resync}
 * Resync HA (resend existing sessions to new failover)
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat_ha_resync_command, static) = {
    .path = "nat ha resync",
    .short_help = "nat ha resync",
    .function = nat_ha_resync_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{show nat44 hash tables}
 * Show NAT44 hash tables
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_hash, static) = {
  .path = "show nat44 hash tables",
  .short_help = "show nat44 hash tables [detail|verbose]",
  .function = nat44_show_hash_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{nat44 add address}
 * Add/delete NAT44 pool address.
 * To add NAT44 pool address use:
 *  vpp# nat44 add address 172.16.1.3
 *  vpp# nat44 add address 172.16.2.2 - 172.16.2.24
 * To add NAT44 pool address for specific tenant (identified by VRF id) use:
 *  vpp# nat44 add address 172.16.1.3 tenant-vrf 10
 * @cliexend
?*/
VLIB_CLI_COMMAND (add_address_command, static) = {
  .path = "nat44 add address",
  .short_help = "nat44 add address <ip4-range-start> [- <ip4-range-end>] "
                "[tenant-vrf <vrf-id>] [twice-nat] [del]",
  .function = add_address_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{show nat44 summary}
 * Show NAT44 summary
 * vpp# show nat44 summary
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_summary_command, static) = {
  .path = "show nat44 summary",
  .short_help = "show nat44 summary",
  .function = nat44_show_summary_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{show nat44 addresses}
 * Show NAT44 pool addresses.
 * vpp# show nat44 addresses
 * NAT44 pool addresses:
 * 172.16.2.2
 *   tenant VRF independent
 *   10 busy udp ports
 *   0 busy tcp ports
 *   0 busy icmp ports
 * 172.16.1.3
 *   tenant VRF: 10
 *   0 busy udp ports
 *   2 busy tcp ports
 *   0 busy icmp ports
 * NAT44 twice-nat pool addresses:
 * 10.20.30.72
 *   tenant VRF independent
 *   0 busy udp ports
 *   0 busy tcp ports
 *   0 busy icmp ports
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_addresses_command, static) = {
  .path = "show nat44 addresses",
  .short_help = "show nat44 addresses",
  .function = nat44_show_addresses_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{set interface nat44}
 * Enable/disable NAT44 feature on the interface.
 * To enable NAT44 feature with local network interface use:
 *  vpp# set interface nat44 in GigabitEthernet0/8/0
 * To enable NAT44 feature with external network interface use:
 *  vpp# set interface nat44 out GigabitEthernet0/a/0
 * @cliexend
?*/
VLIB_CLI_COMMAND (set_interface_snat_command, static) = {
  .path = "set interface nat44",
  .function = snat_feature_command_fn,
  .short_help = "set interface nat44 in <intfc> out <intfc> [output-feature] "
                "[del]",
};

/*?
 * @cliexpar
 * @cliexstart{show nat44 interfaces}
 * Show interfaces with NAT44 feature.
 * vpp# show nat44 interfaces
 * NAT44 interfaces:
 *  GigabitEthernet0/8/0 in
 *  GigabitEthernet0/a/0 out
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_interfaces_command, static) = {
  .path = "show nat44 interfaces",
  .short_help = "show nat44 interfaces",
  .function = nat44_show_interfaces_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{nat44 add static mapping}
 * Static mapping allows hosts on the external network to initiate connection
 * to to the local network host.
 * To create static mapping between local host address 10.0.0.3 port 6303 and
 * external address 4.4.4.4 port 3606 for TCP protocol use:
 *  vpp# nat44 add static mapping tcp local 10.0.0.3 6303 external 4.4.4.4 3606
 * If not runnig "static mapping only" NAT plugin mode use before:
 *  vpp# nat44 add address 4.4.4.4
 * To create address only static mapping between local and external address use:
 *  vpp# nat44 add static mapping local 10.0.0.3 external 4.4.4.4
 * To create ICMP static mapping between local and external with ICMP echo
 * identifier 10 use:
 *  vpp# nat44 add static mapping icmp local 10.0.0.3 10 external 4.4.4.4 10
 * To force use of specific pool address, vrf independent
 *  vpp# nat44 add static mapping local 10.0.0.2 1234 external 10.0.2.2 1234 twice-nat exact 10.0.1.2
 * @cliexend
?*/
VLIB_CLI_COMMAND (add_static_mapping_command, static) = {
  .path = "nat44 add static mapping",
  .function = add_static_mapping_command_fn,
  .short_help =
    "nat44 add static mapping tcp|udp|icmp local <addr> [<port|icmp-echo-id>] "
    "external <addr> [<port|icmp-echo-id>] [vrf <table-id>] [twice-nat|self-twice-nat] "
    "[out2in-only] [exact <pool-addr>] [del]",
};

/*?
 * @cliexpar
 * @cliexstart{nat44 add identity mapping}
 * Identity mapping translate an IP address to itself.
 * To create identity mapping for address 10.0.0.3 port 6303 for TCP protocol
 * use:
 *  vpp# nat44 add identity mapping 10.0.0.3 tcp 6303
 * To create identity mapping for address 10.0.0.3 use:
 *  vpp# nat44 add identity mapping 10.0.0.3
 * To create identity mapping for DHCP addressed interface use:
 *  vpp# nat44 add identity mapping external GigabitEthernet0/a/0 tcp 3606
 * @cliexend
?*/
VLIB_CLI_COMMAND (add_identity_mapping_command, static) = {
  .path = "nat44 add identity mapping",
  .function = add_identity_mapping_command_fn,
  .short_help = "nat44 add identity mapping <ip4-addr>|external <interface> "
    "[<protocol> <port>] [vrf <table-id>] [del]",
};

/*?
 * @cliexpar
 * @cliexstart{nat44 add load-balancing static mapping}
 * Service load balancing using NAT44
 * To add static mapping with load balancing for service with external IP
 * address 1.2.3.4 and TCP port 80 and mapped to 2 local servers
 * 10.100.10.10:8080 and 10.100.10.20:8080 with probability 80% resp. 20% use:
 *  vpp# nat44 add load-balancing static mapping protocol tcp external 1.2.3.4:80 local 10.100.10.10:8080 probability 80 local 10.100.10.20:8080 probability 20
 * @cliexend
?*/
VLIB_CLI_COMMAND (add_lb_static_mapping_command, static) = {
  .path = "nat44 add load-balancing static mapping",
  .function = add_lb_static_mapping_command_fn,
  .short_help =
    "nat44 add load-balancing static mapping protocol tcp|udp "
    "external <addr>:<port> local <addr>:<port> [vrf <table-id>] "
    "probability <n> [twice-nat|self-twice-nat] [out2in-only] "
    "[affinity <timeout-seconds>] [del]",
};

/*?
 * @cliexpar
 * @cliexstart{nat44 add load-balancing static mapping}
 * Modify service load balancing using NAT44
 * To add new back-end server 10.100.10.30:8080 for service load balancing
 * static mapping with external IP address 1.2.3.4 and TCP port 80 use:
 *  vpp# nat44 add load-balancing back-end protocol tcp external 1.2.3.4:80 local 10.100.10.30:8080 probability 25
 * @cliexend
?*/
VLIB_CLI_COMMAND (add_lb_backend_command, static) = {
  .path = "nat44 add load-balancing back-end",
  .function = add_lb_backend_command_fn,
  .short_help =
    "nat44 add load-balancing back-end protocol tcp|udp "
    "external <addr>:<port> local <addr>:<port> [vrf <table-id>] "
    "probability <n> [del]",
};

/*?
 * @cliexpar
 * @cliexstart{show nat44 static mappings}
 * Show NAT44 static mappings.
 * vpp# show nat44 static mappings
 * NAT44 static mappings:
 *  local 10.0.0.3 external 4.4.4.4 vrf 0
 *  tcp local 192.168.0.4:6303 external 4.4.4.3:3606 vrf 0
 *  tcp vrf 0 external 1.2.3.4:80  out2in-only
 *   local 10.100.10.10:8080 probability 80
 *   local 10.100.10.20:8080 probability 20
 *  tcp local 10.100.3.8:8080 external 169.10.10.1:80 vrf 0 twice-nat
 *  tcp local 10.0.0.10:3603 external GigabitEthernet0/a/0:6306 vrf 10
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_static_mappings_command, static) = {
  .path = "show nat44 static mappings",
  .short_help = "show nat44 static mappings",
  .function = nat44_show_static_mappings_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{nat44 add interface address}
 * Use NAT44 pool address from specific interfce
 * To add NAT44 pool address from specific interface use:
 *  vpp# nat44 add interface address GigabitEthernet0/8/0
 * @cliexend
?*/
VLIB_CLI_COMMAND (snat_add_interface_address_command, static) = {
    .path = "nat44 add interface address",
    .short_help = "nat44 add interface address <interface> [twice-nat] [del]",
    .function = snat_add_interface_address_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{show nat44 interface address}
 * Show NAT44 pool address interfaces
 * vpp# show nat44 interface address
 * NAT44 pool address interfaces:
 *  GigabitEthernet0/a/0
 * NAT44 twice-nat pool address interfaces:
 *  GigabitEthernet0/8/0
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_interface_address_command, static) = {
  .path = "show nat44 interface address",
  .short_help = "show nat44 interface address",
  .function = nat44_show_interface_address_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{show nat44 sessions}
 * Show NAT44 sessions.
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_sessions_command, static) = {
  .path = "show nat44 sessions",
  .short_help = "show nat44 sessions [detail|metrics]",
  .function = nat44_show_sessions_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{set nat44 session limit}
 * Set NAT44 session limit.
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_set_session_limit_command, static) = {
  .path = "set nat44 session limit",
  .short_help = "set nat44 session limit <limit> [vrf <table-id>]",
  .function = nat44_set_session_limit_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{nat44 del user}
 * To delete all NAT44 user sessions:
 *  vpp# nat44 del user 10.0.0.3
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_del_user_command, static) = {
    .path = "nat44 del user",
    .short_help = "nat44 del user <addr> [fib <index>]",
    .function = nat44_del_user_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{clear nat44 sessions}
 * To clear all NAT44 sessions
 *  vpp# clear nat44 sessions
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_clear_sessions_command, static) = {
    .path = "clear nat44 sessions",
    .short_help = "clear nat44 sessions",
    .function = nat44_clear_sessions_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{nat44 del session}
 * To administratively delete NAT44 session by inside address and port use:
 *  vpp# nat44 del session in 10.0.0.3:6303 tcp
 * To administratively delete NAT44 session by outside address and port use:
 *  vpp# nat44 del session out 1.0.0.3:6033 udp
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_del_session_command, static) = {
    .path = "nat44 del session",
    .short_help = "nat44 del session in|out <addr>:<port> tcp|udp|icmp [vrf <id>] [external-host <addr>:<port>]",
    .function = nat44_del_session_command_fn,
};

/*?
 * @cliexpar
 * @cliexstart{nat44 forwarding}
 * Enable or disable forwarding
 * Forward packets which don't match existing translation
 * or static mapping instead of dropping them.
 * To enable forwarding, use:
 *  vpp# nat44 forwarding enable
 * To disable forwarding, use:
 *  vpp# nat44 forwarding disable
 * @cliexend
?*/
VLIB_CLI_COMMAND (snat_forwarding_set_command, static) = {
  .path = "nat44 forwarding",
  .short_help = "nat44 forwarding enable|disable",
  .function = snat_forwarding_set_command_fn,
};

/* *INDENT-ON* */

/*
 * fd.io coding-style-patch-verification: ON
 *
 * Local Variables:
 * eval: (c-set-style "gnu")
 * End:
 */