set int state tuntap-0 down set int ip address GigabitEthernet2/1/0 1.2.3.4/24 set int state GigabitEthernet2/1/0 up cre sub GigabitEthernet2/1/0 1 dot1q 7 set int state GigabitEthernet2/1/0.1 up set int state GigabitEthernet2/2/0 up cre sub GigabitEthernet2/2/0 1 dot1q 9 set int state GigabitEthernet2/2/0.1 up loop create set int l2 bridge loop0 0 bvi set int ip table loop0 0 set int state loop0 up set int l2 bridge GigabitEthernet2/1/0.1 0 set int l2 bridge GigabitEthernet2/2/0.1 0 set int l2 tag-rewrite GigabitEthernet2/1/0.1 pop 1 set int l2 tag-rewrite GigabitEthernet2/2/0.1 pop 1 l2fib add 00:22:44:06:08:0a 0 GigabitEthernet2/1/0.1 static l2fib add 00:02:04:06:08:0a 0 GigabitEthernet2/2/0.1 static ip route table 0 8.0.0.1/32 via loop0 set ip neighbor loop0 8.0.0.1 00:02:04:06:08:0a ip route add 1.2.3.3/32 via GigabitEthernet2/1/0 IP4: 00:15:17:61:73:47 -> 00:15:17:61:73:46 cle er cle int cle run packet-generator new { \ name bvi_to_l2 \ limit 100 \ node ethernet-input \ interface GigabitEthernet2/1/0 \ data { \ IP4: 0050.56b7.7c83 -> 0050.56b7.296d \ GRE: 1.2.3.3 -> 8.0.0.1 mpls_unicast \ } } packet-generator new { \ name l2_to_bvi \ limit 50 \ node ethernet-input \ interface GigabitEthernet2/2/0 \ data { \ IP4: 0050.56b7.7c83 -> dead.0000.0000 vlan 9 \ GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast \ } \ } packet-generator new { \ name l2_to_bvi_via_flood \ limit 25 \ node ethernet-input \ interface GigabitEthernet2/2/0 \ data { \ IP4: 0050.56b7.7c83 -> ffff.ffff.ffff vlan 9 \ GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast \ } \ }