create packet-generator interface pg0 create packet-generator interface pg1 set int ip address pg0 192.168.0.1/24 set int ip address pg1 192.168.1.1/24 pipe create ip6 table add 1 ip table add 1 set int ip6 table pipe0.1 1 set int ip table pipe0.1 1 set int ip address pipe0.0 2001::1/64 set int ip address pipe0.1 2001::2/64 set int unnum pipe0.1 use pg1 set int state pg0 up set int state pg1 up set int state pipe0 up ipsec sa add 20 spi 200 crypto-key 6541686776336961656264656f6f6579 crypto-alg aes-cbc-128 tunnel-src 2001::1 tunnel-dst 2001::2 ipsec sa add 30 spi 200 crypto-key 6541686776336961656264656f6f6579 crypto-alg aes-cbc-128 tunnel-src 2001::1 tunnel-dst 2001::2 ipsec spd add 1 ipsec spd add 2 set interface ipsec spd pipe0.0 1 set interface ipsec spd pipe0.1 2 ipsec policy add spd 1 ip6 priority 100 outbound action bypass protocol 50 ipsec policy add spd 1 priority 10 outbound action protect sa 20 local-ip-range 192.168.0.0 - 192.168.0.255 remote-ip-range 10.6.0.0 - 10.6.255.255 ipsec policy add spd 2 priority 10 inbound action protect sa 30 local-ip-range 2001::2 - 2001::2 remote-ip-range 2001::1 - 2001::1 ip route add 10.6.0.0/16 via pipe0.0 ip route table 1 add 10.6.0.0/16 via 192.168.1.2 pg1 set ip neighbor pg1 192.168.1.2 00:11:22:33:44:55 trace add pg-input 100 packet-generator new { name ipsec1 limit 1 rate 1e4 node ip4-input interface pg0 size 100-100 data { UDP: 192.168.0.2 -> 10.6.0.1 UDP: 4321 -> 1234 length 72 incrementing 100 } }