set int ip address GigabitEthernet2/1/0 1.2.3.4/24
set int state GigabitEthernet2/1/0 up 
set int state tuntap-0 down


cre sub GigabitEthernet2/1/0 1 dot1q 1 
cre sub GigabitEthernet2/1/0 2 dot1q 2 
cre sub GigabitEthernet2/1/0 3 dot1q 3
cre sub GigabitEthernet2/2/0 1 dot1q 1 
cre sub GigabitEthernet2/2/0 100 dot1q 100 

set int l2 bridge GigabitEthernet2/1/0 0
set int l2 bridge GigabitEthernet2/1/0.1 0
set int l2 bridge GigabitEthernet2/1/0.2 0
set int l2 bridge GigabitEthernet2/1/0.3 0
set int l2 bridge GigabitEthernet2/2/0 0
set int l2 bridge GigabitEthernet2/2/0.1 0
set int l2 bridge GigabitEthernet2/2/0.100 0

set int l2 tag-rewrite GigabitEthernet2/2/0.1 push dot1q 50
set int l2 tag-rewrite GigabitEthernet2/1/0.2 translate 1-1 dot1q 100
set int l2 tag-rewrite GigabitEthernet2/1/0.3 translate 1-1 dot1q 99 

set int l2 efp-filter GigabitEthernet2/2/0
set int l2 efp-filter GigabitEthernet2/2/0.1
set int l2 efp-filter GigabitEthernet2/2/0.100


l2fib add 00:00:00:00:00:11    0  GigabitEthernet2/2/0.1 static
l2fib add 00:00:00:00:00:22    0  GigabitEthernet2/2/0.100 static

set int state GigabitEthernet2/1/0 up
set int state GigabitEthernet2/1/0.1 up
set int state GigabitEthernet2/1/0.2 up
set int state GigabitEthernet2/1/0.3 up
set int state GigabitEthernet2/2/0 up
set int state GigabitEthernet2/2/0.1 up
set int state GigabitEthernet2/2/0.100 up


trace add pg-input 6

clear error
clear run
clear int

packet-generator new {						\
  name pre_vtr_fail						\
  limit 10							\
  node ethernet-input						\
  interface GigabitEthernet2/1/0				\
  data {							\
      IP4: 0050.56b7.7c83 -> 00:00:00:00:00:11 vlan 1		\
      GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast 			\
  }								\
}

packet-generator new {						\
  name post_vtr_pass						\
  limit 20							\
  node ethernet-input						\
  interface GigabitEthernet2/1/0				\
  data {							\
      IP4: 0050.56b7.7c83 -> 00:00:00:00:00:22 vlan 2		\
      GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast 			\
  }								\
}

packet-generator new {						\
  name post_vtr_fail						\
  limit 50							\
  node ethernet-input						\
  interface GigabitEthernet2/1/0				\
  data {							\
      IP4: 0050.56b7.7c83 -> 00:00:00:00:00:22 vlan 3		\
      GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast 			\
  }								\
}