set int ip address GigabitEthernet2/1/0 1.2.3.4/24 set int state GigabitEthernet2/1/0 up set int state tuntap-0 down cre sub GigabitEthernet2/1/0 1 dot1q 1 cre sub GigabitEthernet2/1/0 2 dot1q 2 cre sub GigabitEthernet2/1/0 3 dot1q 3 cre sub GigabitEthernet2/2/0 1 dot1q 1 cre sub GigabitEthernet2/2/0 100 dot1q 100 set int l2 bridge GigabitEthernet2/1/0 0 set int l2 bridge GigabitEthernet2/1/0.1 0 set int l2 bridge GigabitEthernet2/1/0.2 0 set int l2 bridge GigabitEthernet2/1/0.3 0 set int l2 bridge GigabitEthernet2/2/0 0 set int l2 bridge GigabitEthernet2/2/0.1 0 set int l2 bridge GigabitEthernet2/2/0.100 0 set int l2 tag-rewrite GigabitEthernet2/2/0.1 push dot1q 50 set int l2 tag-rewrite GigabitEthernet2/1/0.2 translate 1-1 dot1q 100 set int l2 tag-rewrite GigabitEthernet2/1/0.3 translate 1-1 dot1q 99 set int l2 efp-filter GigabitEthernet2/2/0 set int l2 efp-filter GigabitEthernet2/2/0.1 set int l2 efp-filter GigabitEthernet2/2/0.100 l2fib add 00:00:00:00:00:11 0 GigabitEthernet2/2/0.1 static l2fib add 00:00:00:00:00:22 0 GigabitEthernet2/2/0.100 static set int state GigabitEthernet2/1/0 up set int state GigabitEthernet2/1/0.1 up set int state GigabitEthernet2/1/0.2 up set int state GigabitEthernet2/1/0.3 up set int state GigabitEthernet2/2/0 up set int state GigabitEthernet2/2/0.1 up set int state GigabitEthernet2/2/0.100 up trace add pg-input 6 clear error clear run clear int packet-generator new { name pre_vtr_fail limit 10 node ethernet-input interface GigabitEthernet2/1/0 data { IP4: 0050.56b7.7c83 -> 00:00:00:00:00:11 vlan 1 GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast } } packet-generator new { name post_vtr_pass limit 20 node ethernet-input interface GigabitEthernet2/1/0 data { IP4: 0050.56b7.7c83 -> 00:00:00:00:00:22 vlan 2 GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast } } packet-generator new { name post_vtr_fail limit 50 node ethernet-input interface GigabitEthernet2/1/0 data { IP4: 0050.56b7.7c83 -> 00:00:00:00:00:22 vlan 3 GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast } }