/* * Copyright (c) 2016 Cisco and/or its affiliates. * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef __FIB_TABLE_H__ #define __FIB_TABLE_H__ #include #include #include #include #include /** * Flags for the source data */ typedef enum fib_table_attribute_t_ { /** * Marker. Add new values after this one. */ FIB_TABLE_ATTRIBUTE_FIRST, /** * the table is for IP6 link local addresses */ FIB_TABLE_ATTRIBUTE_IP6_LL = FIB_TABLE_ATTRIBUTE_FIRST, /** * the table is currently resync-ing */ FIB_TABLE_ATTRIBUTE_RESYNC, /** * Marker. add new entries before this one. */ FIB_TABLE_ATTRIBUTE_LAST = FIB_TABLE_ATTRIBUTE_RESYNC, } fib_table_attribute_t; #define FIB_TABLE_ATTRIBUTE_MAX (FIB_TABLE_ATTRIBUTE_LAST+1) #define FIB_TABLE_ATTRIBUTES { \ [FIB_TABLE_ATTRIBUTE_IP6_LL] = "ip6-ll", \ [FIB_TABLE_ATTRIBUTE_RESYNC] = "resync", \ } #define FOR_EACH_FIB_TABLE_ATTRIBUTE(_item) \ for (_item = FIB_TABLE_ATTRIBUTE_FIRST; \ _item < FIB_TABLE_ATTRIBUTE_MAX; \ _item++) typedef enum fib_table_flags_t_ { FIB_TABLE_FLAG_NONE = 0, FIB_TABLE_FLAG_IP6_LL = (1 << FIB_TABLE_ATTRIBUTE_IP6_LL), FIB_TABLE_FLAG_RESYNC = (1 << FIB_TABLE_ATTRIBUTE_RESYNC), } __attribute__ ((packed)) fib_table_flags_t; extern u8* format_fib_table_flags(u8 *s, va_list *args); /** * @brief * A protocol Independent FIB table */ typedef struct fib_table_t_ { /** * Which protocol this table serves. Used to switch on the union above. */ fib_protocol_t ft_proto; /** * Table flags */ fib_table_flags_t ft_flags; /** * per-source number of locks on the table */ u32 *ft_locks; u32 ft_total_locks; /** * Table ID (hash key) for this FIB. */ u32 ft_table_id; /** * Index into FIB vector. */ fib_node_index_t ft_index; /** * flow hash configuration */ u32 ft_flow_hash_config; /** * Per-source route counters */ u32 *ft_src_route_counts; /** * Total route counters */ u32 ft_total_route_counts; /** * Epoch - number of resyncs performed */ u32 ft_epoch; /** * Table description */ u8* ft_desc; } fib_table_t; /** * @brief * Default names for IP4, IP6, and MPLS FIB table index 0. * Nominally like "ipv4-VRF:0", but this will override that name if set * in a config section of the startup.conf file. */ extern char *fib_table_default_names[FIB_PROTOCOL_MAX]; /** * @brief * Format the description/name of the table */ extern u8* format_fib_table_name(u8* s, va_list *ap); /** * @brief * Perfom a longest prefix match in the non-forwarding table * * @param fib_index * The index of the FIB * * @param prefix * The prefix to lookup * * @return * The index of the fib_entry_t for the best match, which may be the default route */ extern fib_node_index_t fib_table_lookup(u32 fib_index, const fib_prefix_t *prefix); /** * @brief * Perfom an exact match in the non-forwarding table * * @param fib_index * The index of the FIB * * @param prefix * The prefix to lookup * * @return * The index of the fib_entry_t for the exact match, or INVALID * is there is no match. */ extern fib_node_index_t fib_table_lookup_exact_match(u32 fib_index, const fib_prefix_t *prefix); /** * @brief * Get the less specific (covering) prefix * * @param fib_index * The index of the FIB * * @param prefix * The prefix to lookup * * @return * The index of the less specific fib_entry_t. */ extern fib_node_index_t fib_table_get_less_specific(u32 fib_index, const fib_prefix_t *prefix); /** * @brief * Add a 'special' entry to the FIB. * A special entry is an entry that the FIB is not expect to resolve * via the usual mechanisms (i.e. recurisve or neighbour adj DB lookup). * Instead the will link to a DPO valid for the source and/or the flags. * This add is reference counting per-source. So n 'removes' are required * for n 'adds', if the entry is no longer required. * If the source needs to provide non-default forwarding use: * fib_table_entry_special_dpo_add() * * @param fib_index * The index of the FIB * * @param prefix * The prefix to add * * @param source * The ID of the client/source adding the entry. * * @param flags * Flags for the entry. * * @return * the index of the fib_entry_t that is created (or exists already). */ extern fib_node_index_t fib_table_entry_special_add(u32 fib_index, const fib_prefix_t *prefix, fib_source_t source, fib_entry_flag_t flags); /** * @brief * Add a 'special' entry to the FIB that links to the DPO passed * A special entry is an entry that the FIB is not expect to resolve * via the usual mechanisms (i.e. recurisve or neighbour adj DB lookup). * Instead the client/source provides the DPO to link to. * This add is reference counting per-source. So n 'removes' are required * for n 'adds', if the entry is no longer required. * * @param fib_index * The index of the FIB * * @param prefix * The prefix to add * * @param source * The ID of the client/source adding the entry. * * @param flags * Flags for the entry. * * @param dpo * The DPO to link to. * * @return * the index of the fib_entry_t that is created (or existed already). */ extern fib_node_index_t fib_table_entry_special_dpo_add(u32 fib_index, const fib_prefix_t *prefix, fib_source_t source, fib_entry_flag_t stype, const dpo_id_t *dpo); /** * @brief * Update a 'special' entry to the FIB that links to the DPO passed * A special entry is an entry that the FIB is not expect to resolve * via the usual mechanisms (i.e. recurisve or neighbour adj DB lookup). * Instead the client/source provides the DPO to link to. * Special entries are add/remove reference counted per-source. So n * 'removes' are required for n 'adds', if the entry is no longer required. * An 'update' is an 'add' if no 'add' has already been called, otherwise an 'add' * is therefore assumed to act on the reference instance of that add. * * @param fib_entry_index * The index of the FIB entry to update * * @param source * The ID of the client/source adding the entry. * * @param flags * Flags for the entry. * * @param dpo * The DPO to link to. * * @return * the index of the fib_entry_t that is created (or existed already). */ extern fib_node_index_t fib_table_entry_special_dpo_update (u32 fib_index, const fib_prefix_t *prefix, fib_source_t source, fib_entry_flag_t stype, const dpo_id_t *dpo); /** * @brief * Remove a 'special' entry from the FIB. * This add is reference counting per-source. So n 'removes' are required * for n 'adds', if the entry is no longer required. * * @param fib_index * The index of the FIB * * @param prefix * The prefix to remove * * @param source * The ID of the client/source adding the entry. * */ extern void fib_table_entry_special_remove(u32 fib_index, const fib_prefix_t *prefix, fib_source_t source); /** * @brief * Add one path to an entry (aka route) in the FIB. If the entry does not * exist, it will be created. * See the documentation for fib_route_path_t for more descirptions of * the path parameters. * * @param fib_index * The index of the FIB * * @param prefix * The prefix for the entry to add * * @param source * The ID of the client/source adding the entry. * * @param flags * Flags for the entry. * * @paran next_hop_proto * The protocol of the next hop. This cannot be derived in the event that * the next hop is all zeros. * * @param next_hop * The address of the next-hop. * * @param sw_if_index * The index of the interface. * * @param next_hop_fib_index, * The fib index of the next-hop for recursive resolution * * @param next_hop_weight * [un]equal cost path weight * * @param next_hop_label_stack * The path's out-going label stack. NULL is there is none. * * @param pf * Flags for the path * * @return * the index of the fib_entry_t that is created (or existed already). */ extern fib_node_index_t fib_table_entry_path_add(u32 fib_index, const fib_prefix_t *prefix, fib_source_t source, fib_entry_flag_t flags, dpo_proto_t next_hop_proto, const ip46_address_t *next_hop, u32 next_hop_sw_if_index, u32 next_hop_fib_index, u32 next_hop_weight, fib_mpls_label_t *next_hop_label_stack, fib_route_path_flags_t pf); /** * @brief * Add n paths to an entry (aka route) in the FIB. If the entry does not * exist, it will be created. * See the documentation for fib_route_path_t for more descirptions of * the path parameters. * * @param fib_index * The index of the FIB * * @param prefix * The prefix for the entry to add * * @param source * The ID of the client/source adding the entry. * * @param flags * Flags for the entry. * * @param rpaths * A vector of paths. Not const since they may be modified. * * @return * the index of the fib_entry_t that is created (or existed already). */ extern fib_node_index_t fib_table_entry_path_add2(u32 fib_index, const fib_prefix_t *prefix, fib_source_t source, fib_entry_flag_t flags, fib_route_path_t *rpath); /** * @brief * remove one path to an entry (aka route) in the FIB. If this is the entry's * last path, then the entry will be removed, unless it has other sources. * See the documentation for fib_route_path_t for more descirptions of * the path parameters. * * @param fib_index * The index of the FIB * * @param prefix * The prefix for the entry to add * * @param source * The ID of the client/source adding the entry. * * @paran next_hop_proto * The protocol of the next hop. This cannot be derived in the event that * the next hop is all zeros. * * @param next_hop * The address of the next-hop. * * @param sw_if_index * The index of the interface. * * @param next_hop_fib_index, * The fib index of the next-hop for recursive resolution * * @param next_hop_weight * [un]equal cost path weight * * @param pf * Flags for the path */ extern void fib_table_entry_path_remove(u32 fib_index, const fib_prefix_t *prefix, fib_source_t source, dpo_proto_t next_hop_proto, const ip46_address_t *next_hop, u32 next_hop_sw_if_index, u32 next_hop_fib_index, u32 next_hop_weight, fib_route_path_flags_t pf); /** * @brief * Remove n paths to an entry (aka route) in the FIB. If this is the entry's * last path, then the entry will be removed, unless it has other sources. * See the documentation for fib_route_path_t for more descirptions of * the path parameters. * * @param fib_index * The index of the FIB * * @param prefix * The prefix for the entry to add * * @param source * The ID of the client/source adding the entry. * * @param rpaths * A vector of paths. */ extern void fib_table_entry_path_remove2(u32 fib_index, const fib_prefix_t *prefix, fib_source_t source, fib_route_path_t *paths); /** * @brief * Update an entry to have a new set of paths. If the entry does not * exist, it will be created. * The difference between an 'path-add' and an update, is that path-add is * an incremental addition of paths, whereas an update is a wholesale swap. * * @param fib_index * The index of the FIB * * @param prefix * The prefix for the entry to add * * @param source * The ID of the client/source adding the entry. * * @param rpaths * A vector of paths. Not const since they may be modified. * * @return * the index of the fib_entry_t that is created (or existed already). */ extern fib_node_index_t fib_table_entry_update(u32 fib_index, const fib_prefix_t *prefix, fib_source_t source, fib_entry_flag_t flags, fib_route_path_t *paths); /** * @brief * Update the entry to have just one path. If the entry does not * exist, it will be created. * See the documentation for fib_route_path_t for more descirptions of * the path parameters. * * @param fib_index * The index of the FIB * * @param prefix * The prefix for the entry to add * * @param source * The ID of the client/source adding the entry. * * @param flags * Flags for the entry. * * @paran next_hop_proto * The protocol of the next hop. This cannot be derived in the event that * the next hop is all zeros. * * @param next_hop * The address of the next-hop. * * @param sw_if_index * The index of the interface. * * @param next_hop_fib_index, * The fib index of the next-hop for recursive resolution * * @param next_hop_weight * [un]equal cost path weight * * @param next_hop_label_stack * The path's out-going label stack. NULL is there is none. * * @param pf * Flags for the path * * @return * the index of the fib_entry_t that is created (or existed already). */ extern fib_node_index_t fib_table_entry_update_one_path(u32 fib_index, const fib_prefix_t *prefix, fib_source_t source, fib_entry_flag_t flags, dpo_proto_t next_hop_proto, const ip46_address_t *next_hop, u32 next_hop_sw_if_index, u32 next_hop_fib_index, u32 next_hop_weight, fib_mpls_label_t *next_hop_label_stack, fib_route_path_flags_t pf); /** * @brief * Add a MPLS local label for the prefix/route. If the entry does not * exist, it will be created. In theory more than one local label can be * added, but this is not yet supported. * * @param fib_index * The index of the FIB * * @param prefix * The prefix for the entry to which to add the label * * @param label * The MPLS label to add * * @return * the index of the fib_entry_t that is created (or existed already). */ extern fib_node_index_t fib_table_entry_local_label_add(u32 fib_index, const fib_prefix_t *prefix, mpls_label_t label); /** * @brief * remove a MPLS local label for the prefix/route. * * @param fib_index * The index of the FIB * * @param prefix * The prefix for the entry to which to add the label * * @param label * The MPLS label to add */ extern void fib_table_entry_local_label_remove(u32 fib_index, const fib_prefix_t *prefix, mpls_label_t label); /** * @brief * Delete a FIB entry. If the entry has no more sources, then it is * removed from the table. * * @param fib_index * The index of the FIB * * @param prefix * The prefix for the entry to remove * * @param source * The ID of the client/source adding the entry. */ extern void fib_table_entry_delete(u32 fib_index, const fib_prefix_t *prefix, fib_source_t source); /** * @brief * Delete a FIB entry. If the entry has no more sources, then it is * removed from the table. * * @param entry_index * The index of the FIB entry * * @param source * The ID of the client/source adding the entry. */ extern void fib_table_entry_delete_index(fib_node_index_t entry_index, fib_source_t source); /** * @brief * Return the stats index for a FIB entry * @param fib_index * The table's FIB index * @param prefix * The entry's prefix's */ extern u32 fib_table_entry_get_stats_index(u32 fib_index, const fib_prefix_t *prefix); /** * @brief * Flush all entries from a table for the source * * @param fib_index * The index of the FIB * * @paran proto * The protocol of the entries in the table * * @param source * the source to flush */ extern void fib_table_flush(u32 fib_index, fib_protocol_t proto, fib_source_t source); /** * @brief * Resync all entries from a table for the source * this is the mark part of the mark and sweep algorithm. * All entries in this FIB that are sourced by 'source' are marked * as stale. * * @param fib_index * The index of the FIB * * @paran proto * The protocol of the entries in the table * * @param source * the source to flush */ extern void fib_table_mark(u32 fib_index, fib_protocol_t proto, fib_source_t source); /** * @brief * Signal that the table has converged, i.e. all updates are complete. * this is the sweep part of the mark and sweep algorithm. * All entries in this FIB that are sourced by 'source' and marked * as stale are flushed. * * @param fib_index * The index of the FIB * * @paran proto * The protocol of the entries in the table * * @param source * the source to flush */ extern void fib_table_sweep(u32 fib_index, fib_protocol_t proto, fib_source_t source); /** * @brief * Get the index of the FIB bound to the interface * * @paran proto * The protocol of the FIB (and thus the entries therein) * * @param sw_if_index * The interface index * * @return fib_index * The index of the FIB */ extern u32 fib_table_get_index_for_sw_if_index(fib_protocol_t proto, u32 sw_if_index); /** * @brief * Get the Table-ID of the FIB bound to the interface * * @paran proto * The protocol of the FIB (and thus the entries therein) * * @param sw_if_index * The interface index * * @return fib_index * The tableID of the FIB */ extern u32 fib_table_get_table_id_for_sw_if_index(fib_protocol_t proto, u32 sw_if_index); /** * @brief * Get the Table-ID of the FIB from protocol and index * * @param fib_index * The FIB index * * @paran proto * The protocol of the FIB (and thus the entries therein) * * @return fib_index * The tableID of the FIB */ extern u32 fib_table_get_table_id(u32 fib_index, fib_protocol_t proto); /** * @brief * Get the index of the FIB for a Table-ID. This DOES NOT create the * FIB if it does not exist. * * @paran proto * The protocol of the FIB (and thus the entries therein) * * @param table-id * The Table-ID * * @return fib_index * The index of the FIB, which may be INVALID. */ extern u32 fib_table_find(fib_protocol_t proto, u32 table_id); /** * @brief * Get the index of the FIB for a Table-ID. This DOES create the * FIB if it does not exist. * * @paran proto * The protocol of the FIB (and thus the entries therein) * * @param table-id * The Table-ID * * @return fib_index * The index of the FIB * * @param source * The ID of the client/source. */ extern u32 fib_table_find_or_create_and_lock(fib_protocol_t proto, u32 table_id, fib_source_t source); /** * @brief * Get the index of the FIB for a Table-ID. This DOES create the * FIB if it does not exist. * * @paran proto * The protocol of the FIB (and thus the entries therein) * * @param table-id * The Table-ID * * @return fib_index * The index of the FIB * * @param source * The ID of the client/source. * * @param name * The client is choosing the name they want the table to have */ extern u32 fib_table_find_or_create_and_lock_w_name(fib_protocol_t proto, u32 table_id, fib_source_t source, const u8 *name); /** * @brief * Create a new table with no table ID. This means it does not get * added to the hash-table and so can only be found by using the index returned. * * @paran proto * The protocol of the FIB (and thus the entries therein) * * @param fmt * A string to describe the table * * @param source * The ID of the client/source. * * @return fib_index * The index of the FIB */ extern u32 fib_table_create_and_lock(fib_protocol_t proto, fib_source_t source, const char *const fmt, ...); /** * @brief * Get the flow hash configured used by the table * * @param fib_index * The index of the FIB * * @paran proto * The protocol the packets the flow hash will be calculated for. * * @return The flow hash config */ extern flow_hash_config_t fib_table_get_flow_hash_config(u32 fib_index, fib_protocol_t proto); /** * @brief * Get the flow hash configured used by the protocol * * @paran proto * The protocol of the FIB (and thus the entries therein) * * @return The flow hash config */ extern flow_hash_config_t fib_table_get_default_flow_hash_config(fib_protocol_t proto); /** * @brief * Set the flow hash configured used by the table * * @param fib_index * The index of the FIB * * @paran proto * The protocol of the FIB (and thus the entries therein) * * @param hash_config * The flow-hash config to set * * @return none */ extern void fib_table_set_flow_hash_config(u32 fib_index, fib_protocol_t proto, flow_hash_config_t hash_config); /** * @brief * Take a reference counting lock on the table * * @param fib_index * The index of the FIB * * @paran proto * The protocol of the FIB (and thus the entries therein) * * @param source * The ID of the client/source. */ extern void fib_table_unlock(u32 fib_index, fib_protocol_t proto, fib_source_t source); /** * @brief * Release a reference counting lock on the table. When the last lock * has gone. the FIB is deleted. * * @param fib_index * The index of the FIB * * @paran proto * The protocol of the FIB (and thus the entries therein) * * @param source * The ID of the client/source. */ extern void fib_table_lock(u32 fib_index, fib_protocol_t proto, fib_source_t source); /** * @brief * Return the number of entries in the FIB added by a given source. * * @param fib_index * The index of the FIB * * @paran proto * The protocol of the FIB (and thus the entries therein) * * @return number of sourced entries. */ extern u32 fib_table_get_num_entries(u32 fib_index, fib_protocol_t proto, fib_source_t source); /** * @brief * Get a pointer to a FIB table */ extern fib_table_t *fib_table_get(fib_node_index_t index, fib_protocol_t proto); /** * @brief return code controlling how a table walk proceeds */ typedef enum fib_table_walk_rc_t_ { /** * Continue on to the next entry */ FIB_TABLE_WALK_CONTINUE, /** * Do no traverse down this sub-tree */ FIB_TABLE_WALK_SUB_TREE_STOP, /** * Stop the walk completely */ FIB_TABLE_WALK_STOP, } fib_table_walk_rc_t; /** * @brief Call back function when walking entries in a FIB table */ typedef fib_table_walk_rc_t (*fib_table_walk_fn_t)(fib_node_index_t fei, void *ctx); /** * @brief Walk all entries in a FIB table * N.B: This is NOT safe to deletes. If you need to delete walk the whole * table and store elements in a vector, then delete the elements */ extern void fib_table_walk(u32 fib_index, fib_protocol_t proto, fib_table_walk_fn_t fn, void *ctx); /** * @brief Walk all entries in a FIB table * N.B: This is NOT safe to deletes. If you need to delete walk the whole * table and store elements in a vector, then delete the elements */ extern void fib_table_walk_w_src(u32 fib_index, fib_protocol_t proto, fib_source_t src, fib_table_walk_fn_t fn, void *ctx); /** * @brief Walk all entries in a sub-tree FIB table. The 'root' paraneter * is the prefix at the root of the sub-tree. * N.B: This is NOT safe to deletes. If you need to delete walk the whole * table and store elements in a vector, then delete the elements */ extern void fib_table_sub_tree_walk(u32 fib_index, fib_protocol_t proto, const fib_prefix_t *root, fib_table_walk_fn_t fn, void *ctx); /** * @brief format (display) the memory used by the FIB tables */ extern u8 *format_fib_table_memory(u8 *s, va_list *args); /** * Debug function */ extern void fib_table_assert_empty(const fib_table_t *fib_table); #endif