import socket import unittest from util import ppp from asfframework import VppTestRunner from template_ipsec import SpdFlowCacheTemplate class SpdFlowCacheInbound(SpdFlowCacheTemplate): # Override setUpConstants to enable inbound flow cache in config @classmethod def setUpConstants(cls): super(SpdFlowCacheInbound, cls).setUpConstants() cls.vpp_cmdline.extend(["ipsec", "{", "ipv4-inbound-spd-flow-cache on", "}"]) cls.logger.info("VPP modified cmdline is %s" % " ".join(cls.vpp_cmdline)) class IPSec4SpdTestCaseBypass(SpdFlowCacheInbound): """ IPSec/IPv4 inbound: Policy mode test case with flow cache \ (add bypass)""" def test_ipsec_spd_inbound_bypass(self): # In this test case, packets in IPv4 FWD path are configured # to go through IPSec inbound SPD policy lookup. # # 2 inbound SPD rules (1 HIGH and 1 LOW) are added. # - High priority rule action is set to DISCARD. # - Low priority rule action is set to BYPASS. # # Since BYPASS rules take precedence over DISCARD # (the order being PROTECT, BYPASS, DISCARD) we expect the # BYPASS rule to match and traffic to be correctly forwarded. self.create_interfaces(2) pkt_count = 5 self.spd_create_and_intf_add(1, [self.pg1, self.pg0]) # create input rules # bypass rule should take precedence over discard rule, # even though it's lower priority policy_0 = self.spd_add_rem_policy( # inbound, priority 10 1, self.pg1, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", ) policy_1 = self.spd_add_rem_policy( # inbound, priority 15 1, self.pg1, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=15, policy_type="discard", ) # create output rule so we can capture forwarded packets policy_2 = self.spd_add_rem_policy( # outbound, priority 10 1, self.pg0, self.pg1, socket.IPPROTO_UDP, is_out=1, priority=10, policy_type="bypass", ) # check flow cache is empty before sending traffic self.verify_num_inbound_flow_cache_entries(0) # create the packet stream packets = self.create_stream(self.pg0, self.pg1, pkt_count) # add the stream to the source interface self.pg0.add_stream(packets) self.pg1.enable_capture() self.pg_start() # check capture on pg1 capture = self.pg1.get_capture() for packet in capture: try: self.logger.debug(ppp("SPD Add - Got packet:", packet)) except Exception: self.logger.error(ppp("Unexpected or invalid packet:", packet)) raise self.logger.debug("SPD: Num packets: %s", len(capture.res)) # verify captured packets self.verify_capture(self.pg0, self.pg1, capture) # verify all policies matched the expected number of times self.verify_policy_match(pkt_count, policy_0) self.verify_policy_match(0, policy_1) self.verify_policy_match(pkt_count, policy_2) # check input policy has been cached self.verify_num_inbound_flow_cache_entries(1) class IPSec4SpdTestCaseDiscard(SpdFlowCacheInbound): """ IPSec/IPv4 inbound: Policy mode test case with flow cache \ (add discard)""" def test_ipsec_spd_inbound_discard(self): # In this test case, packets in IPv4 FWD path are configured # to go through IPSec inbound SPD policy lookup. # 1 DISCARD rule is added, so all traffic should be dropped. self.create_interfaces(2) pkt_count = 5 self.spd_create_and_intf_add(1, [self.pg1, self.pg0]) # create input rule policy_0 = self.spd_add_rem_policy( # inbound, priority 10 1, self.pg1, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="discard", ) # create output rule so we can capture forwarded packets policy_1 = self.spd_add_rem_policy( # outbound, priority 10 1, self.pg0, self.pg1, socket.IPPROTO_UDP, is_out=1, priority=10, policy_type="bypass", ) # check flow cache is empty before sending traffic self.verify_num_inbound_flow_cache_entries(0) # create the packet stream packets = self.create_stream(self.pg0, self.pg1, pkt_count) # add the stream to the source interface self.pg0.add_stream(packets) self.pg1.enable_capture() self.pg_start() # inbound discard rule should have dropped traffic self.pg1.assert_nothing_captured() # verify all policies matched the expected number of times self.verify_policy_match(pkt_count, policy_0) self.verify_policy_match(0, policy_1) # only inbound discard rule should have been cached self.verify_num_inbound_flow_cache_entries(1) class IPSec4SpdTestCaseRemoveInbound(SpdFlowCacheInbound): """ IPSec/IPv4 inbound: Policy mode test case with flow cache \ (remove bypass)""" def test_ipsec_spd_inbound_remove(self): # In this test case, packets in IPv4 FWD path are configured # to go through IPSec inbound SPD policy lookup. # # 2 inbound SPD rules (1 HIGH and 1 LOW) are added. # - High priority rule action is set to DISCARD. # - Low priority rule action is set to BYPASS. # # Since BYPASS rules take precedence over DISCARD # (the order being PROTECT, BYPASS, DISCARD) we expect the # BYPASS rule to match and traffic to be correctly forwarded. # # The BYPASS rules is then removed, and we check that all traffic # is now correctly dropped. self.create_interfaces(2) pkt_count = 5 self.spd_create_and_intf_add(1, [self.pg1, self.pg0]) # create input rules # bypass rule should take precedence over discard rule, # even though it's lower priority policy_0 = self.spd_add_rem_policy( # inbound, priority 10 1, self.pg1, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", ) policy_1 = self.spd_add_rem_policy( # inbound, priority 15 1, self.pg1, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=15, policy_type="discard", ) # create output rule so we can capture forwarded packets policy_2 = self.spd_add_rem_policy( # outbound, priority 10 1, self.pg0, self.pg1, socket.IPPROTO_UDP, is_out=1, priority=10, policy_type="bypass", ) # check flow cache is empty before sending traffic self.verify_num_inbound_flow_cache_entries(0) # create the packet stream packets = self.create_stream(self.pg0, self.pg1, pkt_count) # add the stream to the source interface self.pg0.add_stream(packets) self.pg1.enable_capture() self.pg_start() # check capture on pg1 capture = self.pg1.get_capture() for packet in capture: try: self.logger.debug(ppp("SPD Add - Got packet:", packet)) except Exception: self.logger.error(ppp("Unexpected or invalid packet:", packet)) raise self.logger.debug("SPD: Num packets: %s", len(capture.res)) # verify captured packets self.verify_capture(self.pg0, self.pg1, capture) # verify all policies matched the expected number of times self.verify_policy_match(pkt_count, policy_0) self.verify_policy_match(0, policy_1) self.verify_policy_match(pkt_count, policy_2) # check input policy has been cached self.verify_num_inbound_flow_cache_entries(1) # remove the input bypass rule self.spd_add_rem_policy( # inbound, priority 10 1, self.pg1, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", remove=True, ) # verify flow cache counter has been reset by rule removal self.verify_num_inbound_flow_cache_entries(0) # resend the same packets self.pg0.add_stream(packets) self.pg1.enable_capture() # flush the old capture self.pg_start() # inbound discard rule should have dropped traffic self.pg1.assert_nothing_captured() # verify all policies matched the expected number of times self.verify_policy_match(pkt_count, policy_0) self.verify_policy_match(pkt_count, policy_1) self.verify_policy_match(pkt_count, policy_2) # by removing the bypass rule, we should have reset the flow cache # we only expect the discard rule to now be in the flow cache self.verify_num_inbound_flow_cache_entries(1) class IPSec4SpdTestCaseReaddInbound(SpdFlowCacheInbound): """ IPSec/IPv4 inbound: Policy mode test case with flow cache \ (add, remove, re-add bypass)""" def test_ipsec_spd_inbound_readd(self): # In this test case, packets in IPv4 FWD path are configured # to go through IPSec inbound SPD policy lookup. # # 2 inbound SPD rules (1 HIGH and 1 LOW) are added. # - High priority rule action is set to DISCARD. # - Low priority rule action is set to BYPASS. # # Since BYPASS rules take precedence over DISCARD # (the order being PROTECT, BYPASS, DISCARD) we expect the # BYPASS rule to match and traffic to be correctly forwarded. # # The BYPASS rules is then removed, and we check that all traffic # is now correctly dropped. # # The BYPASS rule is then readded, checking traffic is not forwarded # correctly again self.create_interfaces(2) pkt_count = 5 self.spd_create_and_intf_add(1, [self.pg1, self.pg0]) # create input rules # bypass rule should take precedence over discard rule, # even though it's lower priority policy_0 = self.spd_add_rem_policy( # inbound, priority 10 1, self.pg1, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", ) policy_1 = self.spd_add_rem_policy( # inbound, priority 15 1, self.pg1, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=15, policy_type="discard", ) # create output rule so we can capture forwarded packets policy_2 = self.spd_add_rem_policy( # outbound, priority 10 1, self.pg0, self.pg1, socket.IPPROTO_UDP, is_out=1, priority=10, policy_type="bypass", ) # check flow cache is empty before sending traffic self.verify_num_inbound_flow_cache_entries(0) # create the packet stream packets = self.create_stream(self.pg0, self.pg1, pkt_count) # add the stream to the source interface self.pg0.add_stream(packets) self.pg1.enable_capture() self.pg_start() # check capture on pg1 capture = self.pg1.get_capture() for packet in capture: try: self.logger.debug(ppp("SPD Add - Got packet:", packet)) except Exception: self.logger.error(ppp("Unexpected or invalid packet:", packet)) raise self.logger.debug("SPD: Num packets: %s", len(capture.res)) # verify captured packets self.verify_capture(self.pg0, self.pg1, capture) # verify all policies matched the expected number of times self.verify_policy_match(pkt_count, policy_0) self.verify_policy_match(0, policy_1) self.verify_policy_match(pkt_count, policy_2) # check input policy has been cached self.verify_num_inbound_flow_cache_entries(1) # remove the input bypass rule self.spd_add_rem_policy( # inbound, priority 10 1, self.pg1, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", remove=True, ) # verify flow cache counter has been reset by rule removal self.verify_num_inbound_flow_cache_entries(0) # resend the same packets self.pg0.add_stream(packets) self.pg1.enable_capture() # flush the old capture self.pg_start() # inbound discard rule should have dropped traffic self.pg1.assert_nothing_captured() # verify all policies matched the expected number of times self.verify_policy_match(pkt_count, policy_0) self.verify_policy_match(pkt_count, policy_1) self.verify_policy_match(pkt_count, policy_2) # by removing the bypass rule, flow cache was reset # we only expect the discard rule to now be in the flow cache self.verify_num_inbound_flow_cache_entries(1) # readd the input bypass rule policy_0 = self.spd_add_rem_policy( # inbound, priority 10 1, self.pg1, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", ) # verify flow cache counter has been reset by rule addition self.verify_num_inbound_flow_cache_entries(0) # resend the same packets self.pg0.add_stream(packets) self.pg1.enable_capture() # flush the old capture self.pg_start() # check capture on pg1 capture = self.pg1.get_capture() for packet in capture: try: self.logger.debug(ppp("SPD Add - Got packet:", packet)) except Exception: self.logger.error(ppp("Unexpected or invalid packet:", packet)) raise # verify captured packets self.verify_capture(self.pg0, self.pg1, capture) # verify all policies matched the expected number of times self.verify_policy_match(pkt_count, policy_0) self.verify_policy_match(pkt_count, policy_1) self.verify_policy_match(pkt_count * 2, policy_2) # by readding the bypass rule, we reset the flow cache # we only expect the bypass rule to now be in the flow cache self.verify_num_inbound_flow_cache_entries(1) class IPSec4SpdTestCaseMultipleInbound(SpdFlowCacheInbound): """ IPSec/IPv4 inbound: Policy mode test case with flow cache \ (multiple interfaces, multiple rules)""" def test_ipsec_spd_inbound_multiple(self): # In this test case, packets in IPv4 FWD path are configured to go # through IPSec outbound SPD policy lookup. # # Multiples rules on multiple interfaces are tested at the same time. # 3x interfaces are configured, binding the same SPD to each. # Each interface has 1 SPD rule- 2x BYPASS and 1x DISCARD # # Traffic should be forwarded with destinations pg1 & pg2 # and dropped to pg0. self.create_interfaces(3) pkt_count = 5 # bind SPD to all interfaces self.spd_create_and_intf_add(1, self.pg_interfaces) # add input rules on all interfaces # pg0 -> pg1 policy_0 = self.spd_add_rem_policy( # inbound, priority 10 1, self.pg1, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", ) # pg1 -> pg2 policy_1 = self.spd_add_rem_policy( # inbound, priority 10 1, self.pg2, self.pg1, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", ) # pg2 -> pg0 policy_2 = self.spd_add_rem_policy( # inbound, priority 10 1, self.pg0, self.pg2, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="discard", ) # create output rules covering the the full ip range # 0.0.0.0 -> 255.255.255.255, so we can capture forwarded packets policy_3 = self.spd_add_rem_policy( # outbound, priority 10 1, self.pg0, self.pg0, socket.IPPROTO_UDP, is_out=1, priority=10, policy_type="bypass", all_ips=True, ) # check flow cache is empty (0 active elements) before sending traffic self.verify_num_inbound_flow_cache_entries(0) # create the packet streams packets0 = self.create_stream(self.pg0, self.pg1, pkt_count) packets1 = self.create_stream(self.pg1, self.pg2, pkt_count) packets2 = self.create_stream(self.pg2, self.pg0, pkt_count) # add the streams to the source interfaces self.pg0.add_stream(packets0) self.pg1.add_stream(packets1) self.pg2.add_stream(packets2) # enable capture on all interfaces for pg in self.pg_interfaces: pg.enable_capture() # start the packet generator self.pg_start() # get captures from ifs if_caps = [] for pg in [self.pg1, self.pg2]: # we are expecting captures on pg1/pg2 if_caps.append(pg.get_capture()) for packet in if_caps[-1]: try: self.logger.debug(ppp("SPD Add - Got packet:", packet)) except Exception: self.logger.error(ppp("Unexpected or invalid packet:", packet)) raise # verify captures that matched BYPASS rules self.verify_capture(self.pg0, self.pg1, if_caps[0]) self.verify_capture(self.pg1, self.pg2, if_caps[1]) # verify that traffic to pg0 matched DISCARD rule and was dropped self.pg0.assert_nothing_captured() # verify all policies matched the expected number of times self.verify_policy_match(pkt_count, policy_0) self.verify_policy_match(pkt_count, policy_1) self.verify_policy_match(pkt_count, policy_2) # check flow/policy match was cached for: 3x input policies self.verify_num_inbound_flow_cache_entries(3) class IPSec4SpdTestCaseOverwriteStaleInbound(SpdFlowCacheInbound): """ IPSec/IPv4 inbound: Policy mode test case with flow cache \ (overwrite stale entries)""" def test_ipsec_spd_inbound_overwrite(self): # The operation of the flow cache is setup so that the entire cache # is invalidated when adding or removing an SPD policy rule. # For performance, old cache entries are not zero'd, but remain # in the table as "stale" entries. If a flow matches a stale entry, # and the epoch count does NOT match the current count, the entry # is overwritten. # In this test, 3 active rules are created and matched to enter # them into the flow cache. # A single entry is removed to invalidate the entire cache. # We then readd the rule and test that overwriting of the previous # stale entries occurs as expected, and that the flow cache entry # counter is updated correctly. self.create_interfaces(3) pkt_count = 5 # bind SPD to all interfaces self.spd_create_and_intf_add(1, self.pg_interfaces) # add input rules on all interfaces # pg0 -> pg1 policy_0 = self.spd_add_rem_policy( # inbound 1, self.pg1, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", ) # pg1 -> pg2 policy_1 = self.spd_add_rem_policy( # inbound 1, self.pg2, self.pg1, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", ) # pg2 -> pg0 policy_2 = self.spd_add_rem_policy( # inbound 1, self.pg0, self.pg2, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="discard", ) # create output rules covering the the full ip range # 0.0.0.0 -> 255.255.255.255, so we can capture forwarded packets policy_3 = self.spd_add_rem_policy( # outbound 1, self.pg0, self.pg0, socket.IPPROTO_UDP, is_out=1, priority=10, policy_type="bypass", all_ips=True, ) # check flow cache is empty (0 active elements) before sending traffic self.verify_num_inbound_flow_cache_entries(0) # create the packet streams packets0 = self.create_stream(self.pg0, self.pg1, pkt_count) packets1 = self.create_stream(self.pg1, self.pg2, pkt_count) packets2 = self.create_stream(self.pg2, self.pg0, pkt_count) # add the streams to the source interfaces self.pg0.add_stream(packets0) self.pg1.add_stream(packets1) self.pg2.add_stream(packets2) # enable capture on all interfaces for pg in self.pg_interfaces: pg.enable_capture() # start the packet generator self.pg_start() # get captures from ifs if_caps = [] for pg in [self.pg1, self.pg2]: # we are expecting captures on pg1/pg2 if_caps.append(pg.get_capture()) for packet in if_caps[-1]: try: self.logger.debug(ppp("SPD Add - Got packet:", packet)) except Exception: self.logger.error(ppp("Unexpected or invalid packet:", packet)) raise # verify captures that matched BYPASS rules self.verify_capture(self.pg0, self.pg1, if_caps[0]) self.verify_capture(self.pg1, self.pg2, if_caps[1]) # verify that traffic to pg0 matched DISCARD rule and was dropped self.pg0.assert_nothing_captured() # verify all policies matched the expected number of times self.verify_policy_match(pkt_count, policy_0) self.verify_policy_match(pkt_count, policy_1) self.verify_policy_match(pkt_count, policy_2) # check flow/policy match was cached for: 3x input policies self.verify_num_inbound_flow_cache_entries(3) # adding an outbound policy should not invalidate output flow cache self.spd_add_rem_policy( # outbound 1, self.pg0, self.pg0, socket.IPPROTO_UDP, is_out=1, priority=1, policy_type="bypass", all_ips=True, ) # check inbound flow cache counter has not been reset self.verify_num_inbound_flow_cache_entries(3) # remove + readd bypass policy - flow cache counter will be reset, # and there will be 3x stale entries in flow cache self.spd_add_rem_policy( # inbound, priority 10 1, self.pg1, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", remove=True, ) # readd policy policy_0 = self.spd_add_rem_policy( # inbound, priority 10 1, self.pg1, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", ) # check counter was reset self.verify_num_inbound_flow_cache_entries(0) # resend the same packets self.pg0.add_stream(packets0) self.pg1.add_stream(packets1) self.pg2.add_stream(packets2) for pg in self.pg_interfaces: pg.enable_capture() # flush previous captures self.pg_start() # get captures from ifs if_caps = [] for pg in [self.pg1, self.pg2]: # we are expecting captures on pg1/pg2 if_caps.append(pg.get_capture()) for packet in if_caps[-1]: try: self.logger.debug(ppp("SPD Add - Got packet:", packet)) except Exception: self.logger.error(ppp("Unexpected or invalid packet:", packet)) raise # verify captures that matched BYPASS rules self.verify_capture(self.pg0, self.pg1, if_caps[0]) self.verify_capture(self.pg1, self.pg2, if_caps[1]) # verify that traffic to pg0 matched DISCARD rule and was dropped self.pg0.assert_nothing_captured() # verify all policies matched the expected number of times self.verify_policy_match(pkt_count, policy_0) self.verify_policy_match(pkt_count * 2, policy_1) self.verify_policy_match(pkt_count * 2, policy_2) # we are overwriting 3x stale entries - check flow cache counter # is correct self.verify_num_inbound_flow_cache_entries(3) class IPSec4SpdTestCaseCollisionInbound(SpdFlowCacheInbound): """ IPSec/IPv4 inbound: Policy mode test case with flow cache \ (hash collision)""" # Override class setup to restrict hash table size to 16 buckets. # This forces using only the lower 4 bits of the hash as a key, # making hash collisions easy to find. @classmethod def setUpConstants(cls): super(SpdFlowCacheInbound, cls).setUpConstants() cls.vpp_cmdline.extend( [ "ipsec", "{", "ipv4-inbound-spd-flow-cache on", "ipv4-inbound-spd-hash-buckets 16", "}", ] ) cls.logger.info("VPP modified cmdline is %s" % " ".join(cls.vpp_cmdline)) def test_ipsec_spd_inbound_collision(self): # The flow cache operation is setup to overwrite an entry # if a hash collision occurs. # In this test, 2 packets are configured that result in a # hash with the same lower 4 bits. # After the first packet is received, there should be one # active entry in the flow cache. # After the second packet with the same lower 4 bit hash # is received, this should overwrite the same entry. # Therefore there will still be a total of one (1) entry, # in the flow cache with two matching policies. # crc32_supported() method is used to check cpu for crc32 # intrinsic support for hashing. # If crc32 is not supported, we fall back to clib_xxhash() self.create_interfaces(4) pkt_count = 5 # bind SPD to all interfaces self.spd_create_and_intf_add(1, self.pg_interfaces) # create output rules covering the the full ip range # 0.0.0.0 -> 255.255.255.255, so we can capture forwarded packets policy_0 = self.spd_add_rem_policy( # outbound 1, self.pg0, self.pg0, socket.IPPROTO_UDP, is_out=1, priority=10, policy_type="bypass", all_ips=True, ) capture_intfs = [] if self.crc32_supported(): # create crc32 collision on last 4 bits hashed_with_crc32 = True # add matching rules policy_1 = self.spd_add_rem_policy( # inbound, priority 10 1, self.pg1, self.pg2, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", ) policy_2 = self.spd_add_rem_policy( # inbound, priority 10 1, self.pg3, self.pg0, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", ) # we expect to get captures on pg1 + pg3 capture_intfs.append(self.pg1) capture_intfs.append(self.pg3) # check flow cache is empty before sending traffic self.verify_num_inbound_flow_cache_entries(0) # create the packet streams # packet hashes to: # ad727628 packets1 = self.create_stream(self.pg2, self.pg1, pkt_count, 1, 4500) # b5512898 packets2 = self.create_stream(self.pg0, self.pg3, pkt_count, 1, 4500) # add the streams to the source interfaces self.pg2.add_stream(packets1) self.pg0.add_stream(packets2) else: # create xxhash collision on last 4 bits hashed_with_crc32 = False # add matching rules policy_1 = self.spd_add_rem_policy( # inbound, priority 10 1, self.pg1, self.pg2, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", ) policy_2 = self.spd_add_rem_policy( # inbound, priority 10 1, self.pg2, self.pg3, socket.IPPROTO_UDP, is_out=0, priority=10, policy_type="bypass", ) capture_intfs.append(self.pg1) capture_intfs.append(self.pg2) # check flow cache is empty before sending traffic self.verify_num_inbound_flow_cache_entries(0) # create the packet streams # 2f8f90f557eef12c packets1 = self.create_stream(self.pg2, self.pg1, pkt_count, 1, 4500) # 6b7f9987719ffc1c packets2 = self.create_stream(self.pg3, self.pg2, pkt_count, 1, 4500) # add the streams to the source interfaces self.pg2.add_stream(packets1) self.pg3.add_stream(packets2) # enable capture on interfaces we expect capture on & send pkts for pg in capture_intfs: pg.enable_capture() self.pg_start() # get captures if_caps = [] for pg in capture_intfs: if_caps.append(pg.get_capture()) for packet in if_caps[-1]: try: self.logger.debug(ppp("SPD Add - Got packet:", packet)) except Exception: self.logger.error(ppp("Unexpected or invalid packet:", packet)) raise # verify captures that matched BYPASS rule if hashed_with_crc32: self.verify_capture(self.pg2, self.pg1, if_caps[0]) self.verify_capture(self.pg0, self.pg3, if_caps[1]) else: # hashed with xxhash self.verify_capture(self.pg2, self.pg1, if_caps[0]) self.verify_capture(self.pg3, self.pg2, if_caps[1]) # verify all policies matched the expected number of times self.verify_policy_match(pkt_count, policy_1) self.verify_policy_match(pkt_count, policy_2) self.verify_policy_match(pkt_count * 2, policy_0) # output policy # we have matched 2 policies, but due to the hash collision # one active entry is expected self.verify_num_inbound_flow_cache_entries(1) if __name__ == "__main__": unittest.main(testRunner=VppTestRunner)