#!/usr/bin/env python3 import socket import unittest from framework import VppTestCase, VppTestRunner from template_bd import BridgeDomain from scapy.layers.l2 import Ether from scapy.layers.inet6 import IPv6, UDP from scapy.layers.vxlan import VXLAN import util from vpp_ip_route import VppIpRoute, VppRoutePath from vpp_vxlan_tunnel import VppVxlanTunnel from vpp_ip import INVALID_INDEX class TestVxlan6(BridgeDomain, VppTestCase): """ VXLAN over IPv6 Test Case """ def __init__(self, *args): BridgeDomain.__init__(self) VppTestCase.__init__(self, *args) def encapsulate(self, pkt, vni): """ Encapsulate the original payload frame by adding VXLAN header with its UDP, IP and Ethernet fields """ return (Ether(src=self.pg0.remote_mac, dst=self.pg0.local_mac) / IPv6(src=self.pg0.remote_ip6, dst=self.pg0.local_ip6) / UDP(sport=self.dport, dport=self.dport, chksum=0) / VXLAN(vni=vni, flags=self.flags) / pkt) @classmethod def ip_range(cls, s, e): """ range of remote ip's """ tmp = cls.pg0.remote_ip6.rsplit(':', 1)[0] return ("%s:%x" % (tmp, i) for i in range(s, e)) def encap_mcast(self, pkt, src_ip, src_mac, vni): """ Encapsulate the original payload frame by adding VXLAN header with its UDP, IP and Ethernet fields """ return (Ether(src=src_mac, dst=self.mcast_mac) / IPv6(src=src_ip, dst=self.mcast_ip6) / UDP(sport=self.dport, dport=self.dport, chksum=0) / VXLAN(vni=vni, flags=self.flags) / pkt) def decapsulate(self, pkt): """ Decapsulate the original payload frame by removing VXLAN header """ # check if is set I flag self.assertEqual(pkt[VXLAN].flags, int('0x8', 16)) return pkt[VXLAN].payload # Method for checking VXLAN encapsulation. # def check_encapsulation(self, pkt, vni, local_only=False, mcast_pkt=False): # TODO: add error messages # Verify source MAC is VPP_MAC and destination MAC is MY_MAC resolved # by VPP using ARP. self.assertEqual(pkt[Ether].src, self.pg0.local_mac) if not local_only: if not mcast_pkt: self.assertEqual(pkt[Ether].dst, self.pg0.remote_mac) else: self.assertEqual(pkt[Ether].dst, type(self).mcast_mac) # Verify VXLAN tunnel source IP is VPP_IP and destination IP is MY_IP. self.assertEqual(pkt[IPv6].src, self.pg0.local_ip6) if not local_only: if not mcast_pkt: self.assertEqual(pkt[IPv6].dst, self.pg0.remote_ip6) else: self.assertEqual(pkt[IPv6].dst, type(self).mcast_ip6) # Verify UDP destination port is VXLAN 4789, source UDP port could be # arbitrary. self.assertEqual(pkt[UDP].dport, type(self).dport) # TODO: checksum check # Verify VNI self.assertEqual(pkt[VXLAN].vni, vni) @classmethod def create_vxlan_flood_test_bd(cls, vni, n_ucast_tunnels): # Create 10 ucast vxlan tunnels under bd start = 10 end = start + n_ucast_tunnels for dest_ip6 in cls.ip_range(start, end): # add host route so dest ip will not be resolved rip = VppIpRoute(cls, dest_ip6, 128, [VppRoutePath(cls.pg0.remote_ip6, INVALID_INDEX)], register=False) rip.add_vpp_config() r = VppVxlanTunnel(cls, src=cls.pg0.local_ip6, dst=dest_ip6, vni=vni) r.add_vpp_config() cls.vapi.sw_interface_set_l2_bridge(r.sw_if_index, bd_id=vni) @classmethod def add_mcast_tunnels_load(cls): cls.add_del_mcast_tunnels_load(is_add=1) @classmethod def del_mcast_tunnels_load(cls): cls.add_del_mcast_tunnels_load(is_add=0) # Class method to start the VXLAN test case. # Overrides setUpClass method in VppTestCase class. # Python try..except statement is used to ensure that the tear down of # the class will be executed even if exception is raised. # @param cls The class pointer. @classmethod def setUpClass(cls): super(TestVxlan6, cls).setUpClass() try: cls.dport = 4789 cls.flags = 0x8 # Create 2 pg interfaces. cls.create_pg_interfaces(range(4)) for pg in cls.pg_interfaces: pg.admin_up() # Configure IPv6 addresses on VPP pg0. cls.pg0.config_ip6() # Resolve MAC address for VPP's IP address on pg0. cls.pg0.resolve_ndp() # Our Multicast address cls.mcast_ip6 = 'ff0e::1' cls.mcast_mac = util.mcast_ip_to_mac(cls.mcast_ip6) except Exception: super(TestVxlan6, cls).tearDownClass() raise @classmethod def tearDownClass(cls): super(TestVxlan6, cls).tearDownClass() def setUp(self): super(TestVxlan6, self).setUp() # Create VXLAN VTEP on VPP pg0, and put vxlan_tunnel0 and pg1 # into BD. self.single_tunnel_vni = 0x12345 self.single_tunnel_bd = 1 r = VppVxlanTunnel(self, src=self.pg0.local_ip6, dst=self.pg0.remote_ip6, vni=self.single_tunnel_vni) r.add_vpp_config() self.vapi.sw_interface_set_l2_bridge(rx_sw_if_index=r.sw_if_index, bd_id=self.single_tunnel_bd) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=self.pg1.sw_if_index, bd_id=self.single_tunnel_bd) # Setup vni 2 to test multicast flooding self.n_ucast_tunnels = 10 self.mcast_flood_bd = 2 self.create_vxlan_flood_test_bd(self.mcast_flood_bd, self.n_ucast_tunnels) r = VppVxlanTunnel(self, src=self.pg0.local_ip6, dst=self.mcast_ip6, mcast_sw_if_index=1, vni=self.mcast_flood_bd) r.add_vpp_config() self.vapi.sw_interface_set_l2_bridge(rx_sw_if_index=r.sw_if_index, bd_id=self.mcast_flood_bd) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=self.pg2.sw_if_index, bd_id=self.mcast_flood_bd) # Setup vni 3 to test unicast flooding self.ucast_flood_bd = 3 self.create_vxlan_flood_test_bd(self.ucast_flood_bd, self.n_ucast_tunnels) self.vapi.sw_interface_set_l2_bridge( rx_sw_if_index=self.pg3.sw_if_index, bd_id=self.ucast_flood_bd) # Method to define VPP actions before tear down of the test case. # Overrides tearDown method in VppTestCase class. # @param self The object pointer. def tearDown(self): super(TestVxlan6, self).tearDown() def show_commands_at_teardown(self): self.logger.info(self.vapi.cli("show bridge-domain 1 detail")) self.logger.info(self.vapi.cli("show bridge-domain 2 detail")) self.logger.info(self.vapi.cli("show bridge-domain 3 detail")) self.logger.info(self.vapi.cli("show vxlan tunnel")) if __name__ == '__main__': unittest.main(testRunner=VppTestRunner)