/* * Copyright (c) 2015 Cisco and/or its affiliates. * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /* * buffer.h: VLIB buffers * * Copyright (c) 2008 Eliot Dresselhaus * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ #ifndef included_vlib_buffer_h #define included_vlib_buffer_h #include #include #include #include #include /* for vlib_error_t */ #if DPDK > 0 #include #define VLIB_BUFFER_DATA_SIZE (2048) #define VLIB_BUFFER_PRE_DATA_SIZE RTE_PKTMBUF_HEADROOM #else #include /* for __PRE_DATA_SIZE */ #define VLIB_BUFFER_DATA_SIZE (512) #define VLIB_BUFFER_PRE_DATA_SIZE __PRE_DATA_SIZE #endif #if defined (CLIB_HAVE_VEC128) || defined (__aarch64__) typedef u8x16 vlib_copy_unit_t; #else typedef u64 vlib_copy_unit_t; #endif /** \file vlib buffer structure definition and a few select access methods. This structure and the buffer allocation mechanism should perhaps live in vnet, but it would take a lot of typing to make it so. */ /* VLIB buffer representation. */ typedef struct { CLIB_CACHE_LINE_ALIGN_MARK (cacheline0); /* Offset within data[] that we are currently processing. If negative current header points into predata area. */ i16 current_data; /**< signed offset in data[], pre_data[] that we are currently processing. If negative current header points into predata area. */ u16 current_length; /**< Nbytes between current data and the end of this buffer. */ u32 flags; /**< buffer flags:
VLIB_BUFFER_IS_TRACED: trace this buffer.
VLIB_BUFFER_NEXT_PRESENT: this is a multi-chunk buffer.
VLIB_BUFFER_TOTAL_LENGTH_VALID: as it says
VLIB_BUFFER_REPL_FAIL: packet replication failure
VLIB_BUFFER_RECYCLE: as it says
VLIB_BUFFER_FLOW_REPORT: buffer is a flow report, set to avoid adding it to a flow report
VLIB_BUFFER_FLAG_USER(n): user-defined bit N */ #define VLIB_BUFFER_IS_TRACED (1 << 0) #define VLIB_BUFFER_LOG2_NEXT_PRESENT (1) #define VLIB_BUFFER_NEXT_PRESENT (1 << VLIB_BUFFER_LOG2_NEXT_PRESENT) #define VLIB_BUFFER_IS_RECYCLED (1 << 2) #define VLIB_BUFFER_TOTAL_LENGTH_VALID (1 << 3) #define VLIB_BUFFER_REPL_FAIL (1 << 4) #define VLIB_BUFFER_RECYCLE (1 << 5) #define VLIB_BUFFER_FLOW_REPORT (1 << 6) /* User defined buffer flags. */ #define LOG2_VLIB_BUFFER_FLAG_USER(n) (32 - (n)) #define VLIB_BUFFER_FLAG_USER(n) (1 << LOG2_VLIB_BUFFER_FLAG_USER(n)) u32 free_list_index; /**< Buffer free list that this buffer was allocated from and will be freed to. */ u32 total_length_not_including_first_buffer; /**< Only valid for first buffer in chain. Current length plus total length given here give total number of bytes in buffer chain. */ u32 next_buffer; /**< Next buffer for this linked-list of buffers. Only valid if VLIB_BUFFER_NEXT_PRESENT flag is set. */ vlib_error_t error; /**< Error code for buffers to be enqueued to error handler. */ u32 current_config_index; /**< Used by feature subgraph arcs to visit enabled feature nodes */ u8 feature_arc_index; /**< Used to identify feature arcs by intermediate feature node */ u8 dont_waste_me[3]; /**< Available space in the (precious) first 32 octets of buffer metadata Before allocating any of it, discussion required! */ u32 opaque[8]; /**< Opaque data used by sub-graphs for their own purposes. See .../vnet/vnet/buffer.h */ CLIB_CACHE_LINE_ALIGN_MARK (cacheline1); u32 trace_index; /**< Specifies index into trace buffer if VLIB_PACKET_IS_TRACED flag is set. */ u32 recycle_count; /**< Used by L2 path recycle code */ u32 opaque2[14]; /**< More opaque data, currently unused */ /***** end of second cache line */ CLIB_CACHE_LINE_ALIGN_MARK (cacheline2); u8 pre_data[VLIB_BUFFER_PRE_DATA_SIZE]; /**< Space for inserting data before buffer start. Packet rewrite string will be rewritten backwards and may extend back before buffer->data[0]. Must come directly before packet data. */ u8 data[0]; /**< Packet data. Hardware DMA here */ } vlib_buffer_t; /* Must be a multiple of 64B. */ #define VLIB_BUFFER_HDR_SIZE (sizeof(vlib_buffer_t) - VLIB_BUFFER_PRE_DATA_SIZE) /** \brief Prefetch buffer metadata. The first 64 bytes of buffer contains most header information @param b - (vlib_buffer_t *) pointer to the buffer @param type - LOAD, STORE. In most cases, STORE is the right answer */ #define vlib_prefetch_buffer_header(b,type) CLIB_PREFETCH (b, 64, type) always_inline vlib_buffer_t * vlib_buffer_next_contiguous (vlib_buffer_t * b, u32 buffer_bytes) { return (void *) (b + 1) + buffer_bytes; } always_inline void vlib_buffer_struct_is_sane (vlib_buffer_t * b) { ASSERT (sizeof (b[0]) % 64 == 0); /* Rewrite data must be before and contiguous with packet data. */ ASSERT (b->pre_data + VLIB_BUFFER_PRE_DATA_SIZE == b->data); } /** \brief Get pointer to current data to process @param b - (vlib_buffer_t *) pointer to the buffer @return - (void *) (b->data + b->current_data) */ always_inline void * vlib_buffer_get_current (vlib_buffer_t * b) { /* Check bounds. */ ASSERT ((signed) b->current_data >= (signed) -VLIB_BUFFER_PRE_DATA_SIZE); return b->data + b->current_data; } /** \brief Advance current data pointer by the supplied (signed!) amount @param b - (vlib_buffer_t *) pointer to the buffer @param l - (word) signed increment */ always_inline void vlib_buffer_advance (vlib_buffer_t * b, word l) { ASSERT (b->current_length >= l); b->current_data += l; b->current_length -= l; } /** \brief Reset current header & length to state they were in when packet was received. @param b - (vlib_buffer_t *) pointer to the buffer */ always_inline void vlib_buffer_reset (vlib_buffer_t * b) { b->current_length += clib_max (b->current_data, 0); b->current_data = 0; } /** \brief Get pointer to buffer's opaque data array @param b - (vlib_buffer_t *) pointer to the buffer @return - (void *) b->opaque */ always_inline void * vlib_get_buffer_opaque (vlib_buffer_t * b) { return (void *) b->opaque; } /** \brief Get pointer to buffer's opaque2 data array @param b - (vlib_buffer_t *) pointer to the buffer @return - (void *) b->opaque2 */ always_inline void * vlib_get_buffer_opaque2 (vlib_buffer_t * b) { return (void *) b->opaque2; } /* Forward declaration. */ struct vlib_main_t; typedef struct vlib_buffer_free_list_t { /* Template buffer used to initialize first 16 bytes of buffers allocated on this free list. */ vlib_buffer_t buffer_init_template; /* Our index into vlib_main_t's buffer_free_list_pool. */ u32 index; /* Number of data bytes for buffers in this free list. */ u32 n_data_bytes; /* Number of buffers to allocate when we need to allocate new buffers from physmem heap. */ u32 min_n_buffers_each_physmem_alloc; /* Total number of buffers allocated from this free list. */ u32 n_alloc; /* Vector of free buffers. Each element is a byte offset into I/O heap. Aligned vectors always has naturally aligned vlib_copy_unit_t sized chunks of buffer indices. Unaligned vector has any left over. This is meant to speed up copy routines. */ u32 *aligned_buffers, *unaligned_buffers; /* Memory chunks allocated for this free list recorded here so they can be freed when free list is deleted. */ void **buffer_memory_allocated; /* Free list name. */ u8 *name; /* Callback functions to initialize newly allocated buffers. If null buffers are zeroed. */ void (*buffer_init_function) (struct vlib_main_t * vm, struct vlib_buffer_free_list_t * fl, u32 * buffers, u32 n_buffers); /* Callback function to announce that buffers have been added to the freelist */ void (*buffers_added_to_freelist_function) (struct vlib_main_t * vm, struct vlib_buffer_free_list_t * fl); uword buffer_init_function_opaque; } __attribute__ ((aligned (16))) vlib_buffer_free_list_t; typedef struct { /* Buffer free callback, for subversive activities */ u32 (*buffer_free_callback) (struct vlib_main_t * vm, u32 * buffers, u32 n_buffers, u32 follow_buffer_next); /* Pool of buffer free lists. Multiple free lists exist for packet generator which uses separate free lists for each packet stream --- so as to avoid initializing static data for each packet generated. */ vlib_buffer_free_list_t *buffer_free_list_pool; #define VLIB_BUFFER_DEFAULT_FREE_LIST_INDEX (0) #define VLIB_BUFFER_DEFAULT_FREE_LIST_BYTES VLIB_BUFFER_DATA_SIZE /* Hash table mapping buffer size (rounded to next unit of sizeof (vlib_buffer_t)) to free list index. */ uword *free_list_by_size; /* Hash table mapping buffer index into number 0 => allocated but free, 1 => allocated and not-free. If buffer index is not in hash table then this buffer has never been allocated. */ uword *buffer_known_hash; /* List of free-lists needing Blue Light Special announcements */ vlib_buffer_free_list_t **announce_list; /* Vector of rte_mempools per socket */ #if DPDK == 1 struct rte_mempool **pktmbuf_pools; #endif } vlib_buffer_main_t; typedef struct { struct vlib_main_t *vlib_main; u32 first_buffer, last_buffer; union { struct { /* Total accumulated bytes in chain starting with first_buffer. */ u32 n_total_data_bytes; /* Max number of bytes to accumulate in chain starting with first_buffer. As this limit is reached buffers are enqueued to next node. */ u32 max_n_data_bytes_per_chain; /* Next node to enqueue buffers to relative to current process node. */ u32 next_index; /* Free list to use to allocate new buffers. */ u32 free_list_index; } tx; struct { /* CLIB fifo of buffer indices waiting to be unserialized. */ u32 *buffer_fifo; /* Event type used to signal that RX buffers have been added to fifo. */ uword ready_one_time_event; } rx; }; } vlib_serialize_buffer_main_t; void serialize_open_vlib_buffer (serialize_main_t * m, struct vlib_main_t *vm, vlib_serialize_buffer_main_t * sm); void unserialize_open_vlib_buffer (serialize_main_t * m, struct vlib_main_t *vm, vlib_serialize_buffer_main_t * sm); u32 serialize_close_vlib_buffer (serialize_main_t * m); void unserialize_close_vlib_buffer (serialize_main_t * m); void *vlib_set_buffer_free_callback (struct vlib_main_t *vm, void *fp); always_inline u32 serialize_vlib_buffer_n_bytes (serialize_main_t * m) { serialize_stream_t *s = &m->stream; vlib_serialize_buffer_main_t *sm = uword_to_pointer (m->stream.data_function_opaque, vlib_serialize_buffer_main_t *); return sm->tx.n_total_data_bytes + s->current_buffer_index + vec_len (s->overflow_buffer); } #if DPDK > 0 #define rte_mbuf_from_vlib_buffer(x) (((struct rte_mbuf *)x) - 1) #define vlib_buffer_from_rte_mbuf(x) ((vlib_buffer_t *)(x+1)) #endif /* */ /** \brief Compile time buffer trajectory tracing option Turn this on if you run into "bad monkey" contexts, and you want to know exactly which nodes they've visited... See vlib/main.c... */ #define VLIB_BUFFER_TRACE_TRAJECTORY 0 #if VLIB_BUFFER_TRACE_TRAJECTORY > 0 #define VLIB_BUFFER_TRACE_TRAJECTORY_INIT(b) (b)->pre_data[0]=0 #else #define VLIB_BUFFER_TRACE_TRAJECTORY_INIT(b) #endif /* VLIB_BUFFER_TRACE_TRAJECTORY */ #endif /* included_vlib_buffer_h */ /* * fd.io coding-style-patch-verification: ON * * Local Variables: * eval: (c-set-style "gnu") * End: */