/*
 * Copyright (c) 2015 Cisco and/or its affiliates.
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at:
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*---------------------------------------------------------------------------
 * from gdp_logical_qos.h
 *---------------------------------------------------------------------------
 */

#ifndef __included_xlate_h__
#define __included_xlate_h__

#include <vnet/policer/fix_types.h>
#include <vnet/policer/police.h>

/*
 * edt: * enum sse2_qos_policer_type_en
 *  Defines type of policer to be allocated
 */
typedef enum sse2_qos_policer_type_en_ {
    SSE2_QOS_POLICER_TYPE_1R2C = 0,
    SSE2_QOS_POLICER_TYPE_1R3C_RFC_2697 = 1,
    SSE2_QOS_POLICER_TYPE_2R3C_RFC_2698 = 2,
    SSE2_QOS_POLICER_TYPE_2R3C_RFC_4115 = 3,
    SSE2_QOS_POLICER_TYPE_2R3C_RFC_MEF5CF1 = 4,
    SSE2_QOS_POLICER_TYPE_MAX
} sse2_qos_policer_type_en;

/*
 * edt: * enum
 *  Enum used to define type of rounding used when calculating policer values
 */
typedef enum {
    SSE2_QOS_ROUND_TO_CLOSEST = 0,
    SSE2_QOS_ROUND_TO_UP,
    SSE2_QOS_ROUND_TO_DOWN,
    SSE2_QOS_ROUND_INVALID
} sse2_qos_round_type_en;

/*
 * edt: * enum
 *  Enum used to define type of rate for configuration, either pps or kbps.
 *  If kbps, then burst is in bytes, if pps, then burst is in ms.
 *
 *  Default of zero is kbps, which is inline with how it is programmed
 *  in actual hardware.  However, the warning is that this is reverse logic
 *  of units_in_bits field in sse2_static_policer_parameters_st, which is
 *  inline with sse_punt_drop.h.
 */
typedef enum {
    SSE2_QOS_RATE_KBPS = 0,
    SSE2_QOS_RATE_PPS,
    SSE2_QOS_RATE_INVALID
} sse2_qos_rate_type_en;

/* 
 * edt: * struct sse2_qos_pol_cfg_params_st
 *
 * Description: 
 * This structure is used to hold user configured policing parameters. 
 * 
 * element: cir_kbps 
 *      CIR in kbps.
 * element: eir_kbps 
 *      EIR or PIR in kbps.
 * element: cb_bytes 
 *      Committed Burst in bytes.
 * element: eb_bytes 
 *      Excess or Peak Burst in bytes.
 * element: cir_pps 
 *      CIR in pps.
 * element: eir_pps 
 *      EIR or PIR in pps.
 * element: cb_ms 
 *      Committed Burst in milliseconds.
 * element: eb_ms 
 *      Excess or Peak Burst in milliseconds.
 * element: rate_type 
 *      Indicates the union if in kbps/bytes or pps/ms.
 * element: rfc 
 *      Policer algorithm - 1R2C, 1R3C (2697), 2R3C (2698) or 2R3C (4115). See
 *      sse_qos_policer_type_en
 * element: rnd_type
 *      Rounding type (see sse_qos_round_type_en). Needed when policer values
 *      need to be rounded. Caller can decide on type of rounding used
 */
typedef struct sse2_qos_pol_cfg_params_st_ {
    union {
        struct {
            uint32_t cir_kbps;
            uint32_t eir_kbps;
            uint64_t cb_bytes;
            uint64_t eb_bytes;
        } PACKED kbps;
        struct {
            uint32_t cir_pps;
            uint32_t eir_pps;
            uint64_t cb_ms;
            uint64_t eb_ms;
        } PACKED pps;
    } PACKED rb;               /* rate burst config */
    uint8_t  rate_type;        /* sse2_qos_rate_type_en */
    uint8_t  rnd_type;         /* sse2_qos_round_type_en */
    uint8_t  rfc;              /* sse2_qos_policer_type_en */
    uint8_t  overwrite_bucket; /* for debugging purposes */
    uint32_t current_bucket;   /* for debugging purposes */
    uint32_t extended_bucket;  /* for debugging purposes */
} sse2_qos_pol_cfg_params_st;


typedef struct sse2_qos_pol_hw_params_st_ {
    uint8_t  rfc;
    uint8_t  allow_negative;
    uint8_t  rate_exp;
    uint16_t avg_rate_man;
    uint16_t peak_rate_man;
    uint8_t  comm_bkt_limit_exp;
    uint8_t  comm_bkt_limit_man;
    uint8_t  extd_bkt_limit_exp;
    uint8_t  extd_bkt_limit_man;
    uint32_t comm_bkt;
    uint32_t extd_bkt;
} sse2_qos_pol_hw_params_st;


trans_layer_rc
sse2_pol_logical_2_physical (sse2_qos_pol_cfg_params_st    *cfg,
                             policer_read_response_type_st *phys);


#endif /* __included_xlate_h__ */