diff options
| author |   Maciek Konstantynowicz <mkonstan@cisco.com> | 2017-02-05 16:33:28 +0000 |
|---|---|---|
| committer |   Peter Mikus <pmikus@cisco.com> | 2017-02-06 16:30:04 +0000 |
| commit | 854e43d1792c153df4801891b3bc65781945ab8e (patch) | |
| tree | c18ded7427f2e8da2618a3b674ab5ddd837e89d1 /docs/report/vpp_functional_tests/overview.rst | |
| parent | 91f196598d989e9c324f919201667c471b9716d9 (diff) | |
csit rls1701 report edits:
- simplified section structure for clarity and readability,
- updated overview sections,
- moved not rls related content from rls_notes to overview sections,
- removed section title suffixes: HW, VIRL.
- completed vpp_unit_tests and vpp_unittest_results sections.
- updated all documentation sections.
- updated rls_notes sections for vpp performance and vpp functional.
Change-Id: Id2c2abbf9d3531ec9f63ecd353f385a0b55ae1ba
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
Signed-off-by: pmikus <pmikus@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
Signed-off-by: pmikus <pmikus@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
(cherry picked from commit da2aa127ee071e37bc4d6060dd39476179e65365)
Diffstat (limited to 'docs/report/vpp_functional_tests/overview.rst')
| -rw-r--r-- | docs/report/vpp_functional_tests/overview.rst | 161 |
1 files changed, 161 insertions, 0 deletions
diff --git a/docs/report/vpp_functional_tests/overview.rst b/docs/report/vpp_functional_tests/overview.rst new file mode 100644 index 0000000000..e85bb92f7b --- /dev/null +++ b/docs/report/vpp_functional_tests/overview.rst @@ -0,0 +1,161 @@ +Overview
+========
+
+Tested Virtual Topologies
+-------------------------
+
+CSIT VPP functional tests are executed on virtualized topologies created using
+Virtual Internet Routing Lab (VIRL) simulation platform contributed by Cisco.
+VIRL runs on physical baremetal servers hosted by LF FD.io project. Majority
+of the tests are executed in the three node logical test topology - Traffic
+Generator (TG) node and two Systems Under Test (SUT) nodes connected in a
+loop. Some tests use two node logical test topology - TG node and SUT1 node.
+Both logical test topologies are shown in the figures below.
+
+::
+
+ +------------------------+ +------------------------+
+ | | | |
+ | +------------------+ | | +------------------+ |
+ | | <-----------------> | |
+ | | | | | | | |
+ | | DUT1 <-----------------> DUT2 | |
+ | +--^--^------------+ | | +------------^--^--+ |
+ | | | | | | | |
+ | | | SUT1 | | SUT2 | | |
+ +------------------------+ +------------------------+
+ | | | |
+ | | | |
+ | | +-----------+ | |
+ | +---------------> <---------------+ |
+ | | TG | |
+ +------------------> <------------------+
+ +-----------+
+
+ +------------------------+
+ | |
+ | +------------------+ |
+ +---------------> <--------------+
+ | | | | | |
+ | |------------> DUT1 <-----------+ |
+ | | | +--^--^------------+ | | |
+ | | | | | |
+ | | | SUT1 | | |
+ | | +------------------------+ | |
+ | | | |
+ | | | |
+ | | +-----------+ | |
+ | +---------------> <---------------+ |
+ | | TG | |
+ +------------------> <------------------+
+ +-----------+
+
+SUT1 and SUT2 are two VMs (Ubuntu or Centos, depending on the test suite), TG
+is a Traffic Generator (TG, another Ubuntu VM). SUTs run VPP SW application in
+Linux user-mode as a Device Under Test (DUT) within the VM. TG runs Scapy SW
+application as a packet Traffic Generator. Logical connectivity between SUTs
+and to TG is provided using virtual NICs using VMs' virtio driver.
+
+Virtual testbeds are created on-demand whenever a verification job is started
+(e.g. triggered by the gerrit patch submission) and destroyed upon completion
+of all functional tests. Each node is a Virtual Machine and each connection
+that is drawn on the diagram is available for use in any test case. During the
+test execution, all nodes are reachable thru the Management network connected
+to every node via dedicated virtual NICs and virtual links (not shown above
+for clarity).
+
+For the test cases that require DUT (VPP) to communicate with VM over the
+vhost-user interfaces, a nested VM is created on SUT1 and/or SUT2 for the
+duration of these particular test cases only. DUT (VPP) test topology with VM
+is shown in the figure below including the applicable packet flow thru the VM
+(marked in the figure with ``***``).
+
+::
+
+ +------------------------+ +------------------------+
+ | +----------+ | | +----------+ |
+ | | VM | | | | VM | |
+ | | ****** | | | | ****** | |
+ | +--^----^--+ | | +--^----^--+ |
+ | *| |* | | *| |* |
+ | +------v----v------+ | | +------v----v------+ |
+ | | * * |**|***********|**| * * | |
+ | | ***** *******<----------------->******* ***** | |
+ | | * DUT1 | | | | DUT2 * | |
+ | +--^---------------+ | | +---------------^--+ |
+ | *| | | |* |
+ | *| SUT1 | | SUT2 |* |
+ +------------------------+ +------------------^-----+
+ *| |*
+ *| |*
+ *| +-----------+ |*
+ *| | | |*
+ *+------------------> TG <------------------+*
+ ******************* | |********************
+ +-----------+
+
+Functional Tests Coverage
+-------------------------
+
+Following VPP functional test areas are covered in the CSIT |release| with
+results listed in this report:
+
+- **DHCP - Client and Proxy** - Dynamic Host Control Protocol Client and Proxy
+ for IPv4, IPv6.
+- **GRE Overlay Tunnels** - Generic Routing Encapsulation for IPv4.
+- **L2BD Ethernet Switching** - L2 Bridge-Domain switched-forwarding for
+ untagged Ethernet, dot1q and dot1ad tagged.
+- **L2XC Ethernet Switching** - L2 Cross-Connect switched-forwarding for
+ untagged Ethernet, dot1q and dot1ad tagged.
+- **LISP Overlay Tunnels** - Locator/ID Separation Protocol overlay tunnels and
+ locator/id mapping control.
+- **Softwire Tunnels** - IPv4-in-IPv6 softwire tunnels.
+- **Cop Address Security** - address white-list and black-list filtering for
+ IPv4, IPv6.
+- **IPSec - Tunnels and Transport** - IPSec tunnel and transport modes.
+- **IPv6 Routed-Forwarding** - IPv6 routed-forwarding, NS/ND, RA, ICMPv6.
+- **uRPF Source Security** - unicast Reverse Path Forwarding security.
+- **Tap Interface** - baseline Linux tap interface tests.
+- **Telemetry - IPFIX and SPAN** - IPFIX netflow statistics and SPAN port
+ mirroring.
+- **VRF Routed-Forwarding** - multi-context IPVPN routed-forwarding for IPv4,
+ IPv6.
+- **iACL Security** - ingress Access Control List security for IPv4, IPv6, MAC.
+- **IPv4 Routed-Forwarding** - IPv4 routed-forwarding, RPF, ARP, Proxy ARP,
+ ICMPv4.
+- **QoS Policer Metering** - ingress packet rate measuring and marking for IPv4,
+ IPv6.
+- **VLAN Tag Translation** - L2 VLAN tag translation 2to2, 2to1, 1to2, 1to1.
+- **VXLAN Overlay Tunnels** - VXLAN tunneling for L2-over-IP, for IPv4, IPv6.
+
+Functional Tests Naming
+-----------------------
+
+CSIT |release| introduced a common structured naming convention for all
+performance and functional tests. This change was driven by substantially
+growing number and type of CSIT test cases. Firstly, the original practice did
+not always follow any strict naming convention. Secondly test names did not
+always clearly capture tested packet encapsulations, and the actual type or
+content of the tests. Thirdly HW configurations in terms of NICs, ports and
+their locality were not captured either. These were but few reasons that drove
+the decision to change and define a new more complete and stricter test naming
+convention, and to apply this to all existing and new test cases.
+
+The new naming should be intuitive for majority of the tests. The complete
+description of CSIT test naming convention is provided on `CSIT test naming
+page <https://wiki.fd.io/view/CSIT/csit-test-naming>`_.
+
+Here few illustrative examples of the new naming usage for functional test
+suites:
+
+#. **Physical port to physical port - a.k.a. NIC-to-NIC, Phy-to-Phy, P2P**
+
+ - *eth2p-ethip4-ip4base-func.robot* => 2 ports of Ethernet, IPv4 baseline
+ routed forwarding, functional tests.
+
+#. **Physical port to VM (or VM chain) to physical port - a.k.a. NIC2VM2NIC,
+ P2V2P, NIC2VMchain2NIC, P2V2V2P**
+
+ - *eth2p-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot* => 2 ports of
+ Ethernet, IPv4 VXLAN Ethernet, L2 bridge-domain switching to/from two vhost
+ interfaces and one VM, functional tests.
|