diff options
Diffstat (limited to 'resources/libraries/robot/performance/performance_configuration.robot')
| -rw-r--r-- | resources/libraries/robot/performance/performance_configuration.robot | 153 |
1 files changed, 136 insertions, 17 deletions
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 30500964d7..2e7274b0a9 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -45,17 +45,45 @@ | | ... # TODO: Rework KW to set all interfaces in path UP and set MTU (including # software interfaces. Run KW at the start phase of VPP setup to split -# from other "functial" configuration. This will allow modularity of this +# from other "functional" configuration. This will allow modularity of this # library | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} -| | | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up -| | | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2} | up +| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if1} +| | | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up +| | | ... | ELSE +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up +| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if2} +| | | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2} | up +| | | ... | ELSE +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_1} | up +| | | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_2} | up | | All VPP Interfaces Ready Wait | ${nodes} | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} -| | | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1} -| | | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2} +| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if1} +| | | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1} +| | | ... | ELSE +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1} +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2} +| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if2} +| | | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2} +| | | ... | ELSE +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_1} +| | | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_2} | | All VPP Interfaces Ready Wait | ${nodes} | Initialize IPSec in 3-node circular topology @@ -984,13 +1012,31 @@ | | ... | ${lb_mode} | | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up | | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} -| | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut1_if2} +| | Run Keyword If | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | ... | ${dut1_eth_bond_if1} +| | ... | ELSE +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_1} +| | ... | ${dut1_eth_bond_if1} +| | Run Keyword Unless | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_2} | | ... | ${dut1_eth_bond_if1} | | ${dut2_eth_bond_if1}= | VPP Create Bond Interface | ${dut2} | ${bond_mode} | | ... | ${lb_mode} | | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up | | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} -| | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2_if1} +| | Run Keyword If | '${if1_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | ... | ${dut2_eth_bond_if1} +| | ... | ELSE +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_1} +| | ... | ${dut2_eth_bond_if1} +| | Run Keyword Unless | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_2} | | ... | ${dut2_eth_bond_if1} | | VPP Show Bond Data On All Nodes | ${nodes} | details=${TRUE} | | Initialize VLAN dot1q sub-interfaces in 3-node circular topology @@ -1704,13 +1750,31 @@ | | ... | ${lb_mode} | | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up | | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} -| | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut1_if2} +| | Run Keyword If | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} +| | ... | ${dut1_eth_bond_if1} +| | ... | ELSE +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_1} +| | ... | ${dut1_eth_bond_if1} +| | Run Keyword Unless | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_2} | | ... | ${dut1_eth_bond_if1} | | ${dut2_eth_bond_if1}= | VPP Create Bond Interface | ${dut2} | ${bond_mode} | | ... | ${lb_mode} | | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up | | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} -| | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2_if1} +| | Run Keyword If | '${if1_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} +| | ... | ${dut2_eth_bond_if1} +| | ... | ELSE +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_1} +| | ... | ${dut2_eth_bond_if1} +| | Run Keyword Unless | '${if2_status}' == 'PASS' +| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_2} | | ... | ${dut2_eth_bond_if1} | | VPP Show Bond Data On All Nodes | ${nodes} | details=${TRUE} | | Initialize VLAN dot1q sub-interfaces in 3-node circular topology @@ -1738,11 +1802,43 @@ | | ... | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} -| | | ${if1_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1} -| | | ${if2_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2} -| | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} | ${if2_pci} -| | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} -| | | Set Test Variable | ${${dut}_if2_pci} | ${if2_pci} +| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if1} +| | | ${if1_pci}= | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1} +| | | ${if1_1_pci}= | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1_1} +| | | ${if1_2_pci}= | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1_2} +| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | | ... | Variable Should Exist | ${${dut}_if2} +| | | ${if2_pci}= | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2} +| | | ${if2_1_pci}= | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2_1} +| | | ${if2_2_pci}= | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2_2} +| | | @{pci_devs}= | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | Create List | ${if1_pci} +| | | ... | ELSE +| | | ... | Create List | ${if1_1_pci} | ${if1_2_pci} +| | | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | Append To List | ${pci_devs} | ${if2_pci} +| | | ... | ELSE +| | | ... | Append To List | ${pci_devs} | ${if2_1_pci} | ${if2_2_pci} +| | | Run keyword | ${dut}.Add DPDK Dev | @{pci_devs} +| | | Run Keyword If | '${if1_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if1_1_pci} | ${if1_1_pci} +| | | Run Keyword Unless | '${if1_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if1_2_pci} | ${if1_2_pci} +| | | Run Keyword If | '${if2_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if2_pci} | ${if2_pci} +| | | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if2_1_pci} | ${if2_1_pci} +| | | Run Keyword Unless | '${if2_status}' == 'PASS' +| | | ... | Set Test Variable | ${${dut}_if2_2_pci} | ${if2_2_pci} | Add single PCI device to all DUTs | | [Documentation] @@ -1757,7 +1853,7 @@ | | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} | | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} -| Add VLAN Strip Offload switch off between DUTs in 3-node single link topology +| Add VLAN strip offload switch off between DUTs in 3-node single link topology | | [Documentation] | | ... | Add VLAN Strip Offload switch off on PCI devices between DUTs to VPP | | ... | configuration file. @@ -1767,6 +1863,20 @@ | | Run keyword | DUT2.Add DPDK Dev Parameter | ${dut2_if1_pci} | | ... | vlan-strip-offload | off +| Add VLAN strip offload switch off between DUTs in 3-node double link topology +| | [Documentation] +| | ... | Add VLAN Strip Offload switch off on PCI devices between DUTs to VPP +| | ... | configuration file. +| | ... +| | Run keyword | DUT1.Add DPDK Dev Parameter | ${dut1_if2_1_pci} +| | ... | vlan-strip-offload | off +| | Run keyword | DUT1.Add DPDK Dev Parameter | ${dut1_if2_2_pci} +| | ... | vlan-strip-offload | off +| | Run keyword | DUT2.Add DPDK Dev Parameter | ${dut2_if1_1_pci} +| | ... | vlan-strip-offload | off +| | Run keyword | DUT2.Add DPDK Dev Parameter | ${dut2_if1_2_pci} +| | ... | vlan-strip-offload | off + | Add DPDK bonded ethernet interfaces to DUTs in 3-node single link topology | | [Documentation] | | ... | Add DPDK bonded Ethernet interfaces with mode XOR and transmit policy @@ -1819,8 +1929,17 @@ | | Run keyword | ${vm_name}.Qemu Set Serial Port | ${serial_port} | | ${ssh_fwd_port}= | Evaluate | ${qemu_id} + ${10021} | | Run keyword | ${vm_name}.Qemu Set Ssh Fwd Port | ${ssh_fwd_port} -| | ${dut_numa}= | Get interfaces numa node | ${nodes['${dut}']} -| | ... | ${${dut}_if1} | ${${dut}_if2} +| | ${if1_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${${dut}_if1} +| | @{if_list}= | Run Keyword If | '${if1_status}' == 'PASS' +| | ... | Create List | ${${dut}_if1} +| | ... | ELSE | Create List | ${${dut}_if1_1} | ${${dut}_if1_2} +| | ${if2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${${dut}_if2} +| | Run Keyword If | '${if2_status}' == 'PASS' +| | ... | Append To List | ${if_list} | ${${dut}_if2} +| | ... | ELSE | Append To List | ${if_list} | ${${dut}_if2_1} | ${${dut}_if2_2} +| | ${dut_numa}= | Get interfaces numa node | ${nodes['${dut}']} | @{if_list} # Compute CPU placement for VM based on expected DUT placement. | | ${os_cpus}= | Set Variable | ${1} | | ${dut_main_cpus}= | Set Variable | ${1} |