aboutsummaryrefslogtreecommitdiffstats
path: root/tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot
diff options
context:
space:
mode:
Diffstat (limited to 'tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot')
-rw-r--r--tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot256
1 files changed, 0 insertions, 256 deletions
diff --git a/tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot
deleted file mode 100644
index ccb674fbd7..0000000000
--- a/tests/honeycomb/func/mgmt-cfg-spanrx-apihc-apivat-func.robot
+++ /dev/null
@@ -1,256 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/honeycomb/port_mirroring.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Resource | resources/libraries/robot/honeycomb/sub_interface.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/telemetry/span.robot
-| Variables | resources/test_data/honeycomb/span.py
-| ... | ${node['interfaces']['port1']['name']}
-| ... | ${node['interfaces']['port3']['name']}
-| ... | local0
-| Variables | resources/test_data/honeycomb/sub_interfaces.py
-| ...
-| Force Tags | HC_FUNC
-| ...
-| Suite Setup | Run Keywords
-| ... | Set Up Honeycomb Functional Test Suite | ${node} | AND
-| ... | Add Interface local0 To Topology | ${node}
-| ...
-| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
-| ...
-| Documentation | *Honeycomb port mirroring test suite.*
-
-*** Test Cases ***
-| TC01: Honeycomb can configure SPAN on an interface - receive
-| | [Documentation] | Honeycomb configures SPAN on interface and verifies
-| | ... | against VPP SPAN dump in state receive.
-| | ...
-| | When Honeycomb configures SPAN on interface
-| | ... | ${node} | ${interface1} | ${settings_receive}
-| | Then Interface SPAN Operational Data from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${settings_receive}
-
-| TC02: Honeycomb can configure SPAN on an interface - transmit
-| | [Documentation] | Honeycomb configures SPAN on interface and verifies
-| | ... | against VPP SPAN dump in state transmit.
-| | ...
-| | When Honeycomb configures SPAN on interface
-| | ... | ${node} | ${interface1} | ${settings_transmit}
-| | Then Interface SPAN Operational Data from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${settings_transmit}
-
-| TC03: Honeycomb can configure SPAN on an interface - both
-| | [Documentation] | Honeycomb configures SPAN on interface and verifies
-| | ... | against VPP SPAN dump in state both.
-| | ...
-| | When Honeycomb configures SPAN on interface
-| | ... | ${node} | ${interface1} | ${settings_both}
-| | Then Interface SPAN Operational Data from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${settings_both}
-
-| TC04: Honeycomb can configure SPAN on an interface with two source interfaces
-| | [Documentation] | Honeycomb configures SPAN on interface and verifies
-| | ... | against VPP SPAN dump in state both.
-| | ...
-| | When Honeycomb configures SPAN on interface
-| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2}
-| | Then Interface SPAN Operational Data from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2}
-
-| TC05: Honeycomb can disable SPAN on interface
-| | [Documentation] | Honeycomb removes existing SPAN configuration
-| | ... | from interface.
-| | ...
-| | Given Interface SPAN Operational Data from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${settings_both} | ${settings_if2}
-| | When Honeycomb removes interface SPAN configuration
-| | ... | ${node} | ${interface1}
-| | Then Interface SPAN Operational Data from Honeycomb should be empty
-| | ... | ${node} | ${interface1}
-
-| TC06: Honeycomb can configure SPAN with two destination interfaces from the same source
-| | [Documentation] | Honeycomb configures SPAN on two interfaces and verifies
-| | ... | against VPP SPAN dump.
-| | ...
-| | [Teardown] | Run Keywords
-| | ... | Honeycomb removes interface SPAN configuration
-| | ... | ${node} | ${interface1} | AND
-| | ... | Honeycomb removes interface SPAN configuration
-| | ... | ${node} | ${interface2}
-| | ...
-| | When Honeycomb configures SPAN on interface
-| | ... | ${node} | ${interface1} | ${settings_if2}
-| | And Honeycomb configures SPAN on interface
-| | ... | ${node} | ${interface2} | ${settings_if2}
-| | Then Interface SPAN Operational Data from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${settings_if2}
-| | Then Interface SPAN Operational Data from Honeycomb should be
-| | ... | ${node} | ${interface2} | ${settings_if2}
-
-| TC07: DUT mirrors IPv4 packets from one interface to another
-| | [Documentation]
-| | ... | [Top] TG=DUT1
-| | ... | [Cfg] (using Honeycomb) On DUT1 configure IPv4 address and set SPAN\
-| | ... | mirroring from one DUT interface to the other.
-| | ... | [Ver] Make TG send an ARP packet to DUT through one interface,\
-| | ... | then receive a copy of sent packet and of DUT's ARP reply\
-| | ... | on the second interface.
-| | ...
-| | [Teardown] | Run Keywords
-| | ... | Show Packet Trace on All DUTs | ${nodes} | AND
-| | ... | Honeycomb clears all interface IPv4 neighbors
-| | ... | ${dut_node} | ${dut_to_tg_if1} | AND
-| | ... | Honeycomb removes interface IPv4 addresses
-| | ... | ${dut_node} | ${dut_to_tg_if1} | AND
-| | ... | Honeycomb removes interface SPAN configuration
-| | ... | ${node} | ${dut_to_tg_if2}
-| | ...
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1}
-| | ... | up
-| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2}
-| | ... | up
-| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix}
-| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if1_mac}
-| | ${settings_5}= | create dictionary | state=both
-| | ... | iface-ref=${dut_to_tg_if1}
-| | And All Vpp Interfaces Ready Wait | ${nodes}
-| | When Honeycomb configures SPAN on interface
-| | ... | ${node} | ${dut_to_tg_if2} | ${settings_5}
-| | Then Send Packet And Check Received Copies | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${dut_to_tg_if1_mac} | ${tg_to_dut_if2}
-| | ... | ${tg_to_dut_if1_ip} | ${dut_to_tg_if1_ip} | ICMP
-
-| TC08: Honeycomb can configure SPAN on a sub-interface - receive
-| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies
-| | ... | against VPP SPAN dump in state receive.
-| | ...
-| | Given Honeycomb creates sub-interface | ${node} | ${interface1}
-| | ... | ${sub_if_1_match} | ${sub_if_1_tags} | ${sub_if_1_settings}
-| | When Honeycomb Configures SPAN on sub-interface
-| | ... | ${node} | ${interface1} | ${1} | ${settings_receive}
-| | Then sub-Interface SPAN Operational Data from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${1} | ${settings_receive}
-
-| TC09: Honeycomb can configure SPAN on a sub-interface - transmit
-| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies
-| | ... | against VPP SPAN dump in state transmit.
-| | ...
-| | Given Sub-interface state from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${1} | down | up
-| | When Honeycomb Configures SPAN on sub-interface
-| | ... | ${node} | ${interface1} | ${1} | ${settings_transmit}
-| | Then sub-Interface SPAN Operational Data from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${1} | ${settings_transmit}
-
-| TC10: Honeycomb can configure SPAN on a sub-interface - both
-| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies
-| | ... | against VPP SPAN dump in state both.
-| | ...
-| | Given Sub-interface state from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${1} | down | up
-| | When Honeycomb Configures SPAN on sub-interface
-| | ... | ${node} | ${interface1} | ${1} | ${settings_both}
-| | Then sub-Interface SPAN Operational Data from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${1} | ${settings_both}
-
-| TC11: Honeycomb can configure SPAN on a sub-interface with two source interfaces
-| | [Documentation] | Honeycomb configures SPAN on sub-interface and verifies
-| | ... | against VPP SPAN dump in state both.
-| | ...
-| | Given Sub-interface state from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${1} | down | up
-| | When Honeycomb Configures SPAN on sub-interface
-| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2}
-| | Then sub-Interface SPAN Operational Data from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2}
-
-| TC12: Honeycomb can disable SPAN on interface
-| | [Documentation] | Honeycomb removes existing SPAN configuration
-| | ... | from sub-interface.
-| | ...
-| | Given Sub-interface state from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${1} | down | up
-| | Given sub-Interface SPAN Operational Data from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${1} | ${settings_both} | ${settings_if2}
-| | When Honeycomb removes sub-interface SPAN configuration
-| | ... | ${node} | ${interface1} | ${1}
-| | Then sub-Interface SPAN Operational Data from Honeycomb should be empty
-| | ... | ${node} | ${interface1} | ${1}
-
-| TC13: Honeycomb can configure SPAN with two destination sub-interfaces from the same source
-| | [Documentation] | Honeycomb configures SPAN on two sub-interfaces
-| | ... | and verifies against VPP SPAN dump.
-| | ...
-| | [Teardown] | Run Keywords
-| | ... | Honeycomb removes sub-interface SPAN configuration
-| | ... | ${node} | ${interface1} | ${1} | AND
-| | ... | Honeycomb removes sub-interface SPAN configuration
-| | ... | ${node} | ${interface2} | ${1}
-| | ...
-| | Given Honeycomb creates sub-interface | ${node} | ${interface2}
-| | ... | ${sub_if_2_match} | ${sub_if_2_tags} | ${sub_if_2_settings}
-| | When Honeycomb Configures SPAN on sub-interface
-| | ... | ${node} | ${interface1} | ${1} | ${settings_if2}
-| | And Honeycomb Configures SPAN on sub-interface
-| | ... | ${node} | ${interface2} | ${1} | ${settings_if2}
-| | Then Sub-Interface SPAN Operational Data from Honeycomb should be
-| | ... | ${node} | ${interface1} | ${1} | ${settings_if2}
-| | Then Sub-Interface SPAN Operational Data from Honeycomb should be
-| | ... | ${node} | ${interface2} | ${1} | ${settings_if2}
-
-| TC14: DUT mirrors IPv4 packets from an interface to a sub-interface
-| | [Documentation]
-| | ... | [Top] TG=DUT1
-| | ... | [Cfg] (using Honeycomb) On DUT1 configure IPv4 address and set SPAN\
-| | ... | mirroring from one DUT interface to a sub-interface on the other\
-| | ... | interface.
-| | ... | [Ver] Make TG send an ARP packet to DUT through one interface,\
-| | ... | then receive a copy of sent packet and of DUT's ARP reply\
-| | ... | on the sub-interface.
-| | ...
-| | [Teardown] | Show Packet Trace on All DUTs | ${nodes}
-| | ...
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Honeycomb creates sub-interface | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${sub_if_1_match} | ${sub_if_1_tags} | ${sub_if_1_settings}
-| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1}
-| | ... | up
-| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2}
-| | ... | up
-| | And Honeycomb sets the sub-interface up
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${1}
-| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix}
-| | And And Honeycomb adds interface IPv4 neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${tg_to_dut_if2_ip} | ${tg_to_dut_if2_mac}
-| | ${settings_5}= | create dictionary | state=both
-| | ... | iface-ref=${dut_to_tg_if2}
-| | And All Vpp Interfaces Ready Wait | ${nodes}
-| | When Honeycomb Configures SPAN on sub-interface
-| | ... | ${node} | ${dut_to_tg_if1} | ${1} | ${settings_5}
-| | Then Send Packet And Check Received Copies | ${tg_node}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac}
-| | ... | ${dut_to_tg_if2_mac} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if2_ip} | ${dut_to_tg_if2_ip} | ICMP