aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func
diff options
context:
space:
mode:
Diffstat (limited to 'tests/vpp/func')
-rw-r--r--tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot161
-rw-r--r--tests/vpp/func/honeycomb/mgmt-cfg-lispgpe-apihc-apivat-func.robot240
2 files changed, 355 insertions, 46 deletions
diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot
index ac5af9ab83..fa2506cba4 100644
--- a/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot
+++ b/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot
@@ -22,11 +22,15 @@
| ... | unknown-unicast-flood=${True} | arp-termination=${True}
*** Settings ***
+| Library | resources.libraries.python.Trace.Trace
| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
| Resource | resources/libraries/robot/honeycomb/lisp.robot
| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
-| Variables | resources/test_data/honeycomb/lisp.py
+| Variables | resources/test_data/honeycomb/lisp/lisp.py
| ...
| Documentation | *Honeycomb Lisp test suite.*
| ...
@@ -38,9 +42,9 @@
*** Test Cases ***
| TC01: Honeycomb enables LISP feature
-| | [Documentation] | Check if Honeycomb can enable the Lisp feature.
+| | [Documentation] | Check if Honeycomb can enable the LISP feature.
| | ...
-| | Given Lisp Should Not Be Configured | ${node}
+| | Given LISP Should Not Be Configured | ${node}
| | When Honeycomb enables LISP | ${node}
| | Then LISP state from Honeycomb should be | ${node} | ${state}
| | And LISP state from VAT should be | ${node} | ${state}
@@ -53,8 +57,8 @@
| | Then Locator Set From Honeycomb Should Be
| | ... | ${node} | ${interface} | ${locator_set}
-| TC03: Honeycomb configures Lisp - remote mapping - Bridge Domain
-| | [Documentation] | Check if Honeycomb can configure a remote Lisp mapping\
+| TC03: Honeycomb configures LISP - remote mapping - Bridge Domain
+| | [Documentation] | Check if Honeycomb can configure a remote LISP mapping\
| | ... | with a bridge domain.
| | ...
| | Given LISP state from Honeycomb should be | ${node} | ${state}
@@ -66,24 +70,24 @@
| | And LISP mapping from VAT should be
| | ... | ${node} | ${vat_remote_bd}
-| TC04: Honeycomb can remove Lisp mapping
-| | [Documentation] | Check if Honeycomb can remove a configured Lisp mapping.
+| TC04: Honeycomb can remove LISP mapping
+| | [Documentation] | Check if Honeycomb can remove a configured LISP mapping.
| | ...
| | Given LISP mapping from Honeycomb should be
| | ... | ${node} | ${remote_bd_subtable}
| | And LISP mapping from VAT should be
| | ... | ${node} | ${vat_remote_bd}
-| | When Honeycomb removes all lisp mappings | ${node}
+| | When Honeycomb removes all LISP mappings | ${node}
| | Then LISP mappings from Honeycomb should not exist
| | ... | ${node}
| | And LISP mappings from VAT should not exist
| | ... | ${node}
-| TC05: Honeycomb configures Lisp - remote mapping - VRF
-| | [Documentation] | Check if Honeycomb can configure a remote Lisp mapping\
+| TC05: Honeycomb configures LISP - remote mapping - VRF
+| | [Documentation] | Check if Honeycomb can configure a remote LISP mapping\
| | ... | with VRF.
| | ...
-| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
+| | [Teardown] | Honeycomb removes all LISP mappings | ${node}
| | ...
| | Given LISP mappings from Honeycomb should not exist
| | ... | ${node}
@@ -94,11 +98,11 @@
| | ... | ${node} | ${remote_vrf_subtable}
| | And LISP mapping from VAT should be | ${node} | ${vat_remote_vrf}
-| TC06: Honeycomb configures Lisp - local mapping - Bridge Domain
-| | [Documentation] | Check if Honeycomb can configure a local Lisp mapping\
+| TC06: Honeycomb configures LISP - local mapping - Bridge Domain
+| | [Documentation] | Check if Honeycomb can configure a local LISP mapping\
| | ... | with a bridge domain.
| | ...
-| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
+| | [Teardown] | Honeycomb removes all LISP mappings | ${node}
| | ...
| | Given Locator Set From Honeycomb Should Be
| | ... | ${node} | ${interface} | ${locator_set}
@@ -112,11 +116,11 @@
| | Then LISP mapping from Honeycomb should be | ${node} | ${local_bd_subtable}
| | And LISP mapping from VAT should be | ${node} | ${vat_local_bd}
-| TC07: Honeycomb configures Lisp - local mapping - VRF
-| | [Documentation] | Check if Honeycomb can configure a local Lisp mapping\
+| TC07: Honeycomb configures LISP - local mapping - VRF
+| | [Documentation] | Check if Honeycomb can configure a local LISP mapping\
| | ... | with VRF.
| | ...
-| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
+| | [Teardown] | Honeycomb removes all LISP mappings | ${node}
| | ...
| | Given Locator Set From Honeycomb Should Be
| | ... | ${node} | ${interface} | ${locator_set}
@@ -128,16 +132,14 @@
| | Then LISP mapping from Honeycomb should be | ${node} | ${local_vrf_subtable}
| | And LISP mapping from VAT should be | ${node} | ${vat_local_vrf}
-| TC08: Honeycomb configures Lisp mapping with adjacency
-| | [Documentation] | Check if Honeycomb can configure local and remote Lisp\
+| TC08: Honeycomb configures LISP mapping with adjacency
+| | [Documentation] | Check if Honeycomb can configure local and remote LISP\
| | ... | mappings with VRF, and configure adjacency.
| | ...
-| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
+| | [Teardown] | Honeycomb removes all LISP mappings | ${node}
| | ...
| | Given Locator Set From Honeycomb Should Be
| | ... | ${node} | ${interface} | ${locator_set}
-| | And Honeycomb creates first l2 bridge domain
-| | ... | ${node} | ${bd2_name} | ${bd_settings}
| | And LISP mappings from Honeycomb should not exist
| | ... | ${node}
| | And LISP mappings from VAT should not exist
@@ -145,29 +147,29 @@
| | And Honeycomb adds LISP mapping | ${node} | ${lisp_settings_both_vrf}
| | When Honeycomb adds LISP adjacency | ${node} | ${7} | remote_map_vrf
| | ... | adj01 | ${vrf_adjacency}
-| | Then Lisp mapping from Honeycomb should be
+| | Then LISP mapping from Honeycomb should be
| | ... | ${node} | ${adj_subtable}
-| TC09: Honeycomb configures Lisp Map Resolver
-| | [Documentation] | Check if Honeycomb can configure a Lisp Map Resolver.
+| TC09: Honeycomb configures LISP Map Resolver
+| | [Documentation] | Check if Honeycomb can configure a LISP Map Resolver.
| | ...
| | Given LISP state from Honeycomb should be | ${node} | ${state}
| | And LISP state from VAT should be | ${node} | ${state}
-| | When Honeycomb adds Lisp Map Resolver | ${node} | ${ip_address}
+| | When Honeycomb adds LISP Map Resolver | ${node} | ${ip_address}
| | Then Map Resolver from Honeycomb should be | ${node} | ${ip_address}
| | And Map Resolver from VAT should be | ${node} | ${ip_address}
-| TC10: Honeycomb configures Lisp Map Server
-| | [Documentation] | Check if Honeycomb can configure a Lisp Map Server.
+| TC10: Honeycomb configures LISP Map Server
+| | [Documentation] | Check if Honeycomb can configure a LISP Map Server.
| | ...
| | Given LISP state from Honeycomb should be | ${node} | ${state}
| | And LISP state from VAT should be | ${node} | ${state}
-| | When Honeycomb adds Lisp Map Server | ${node} | @{ip_addresses}
+| | When Honeycomb adds LISP Map Server | ${node} | @{ip_addresses}
| | Then Map Server from Honeycomb should be | ${node} | @{ip_addresses}
| | And Map Server from VAT should be | ${node} | @{ip_addresses}
-| TC11: Honeycomb configures Lisp PETR configuration
-| | [Documentation] | Check if Honeycomb can configure Lisp
+| TC11: Honeycomb configures LISP PETR configuration
+| | [Documentation] | Check if Honeycomb can configure LISP
| | ... | PETR configuration.
| | ...
| | Given LISP state from Honeycomb should be | ${node} | ${state}
@@ -176,8 +178,8 @@
| | Then PETR configuration from Honeycomb should be | ${node} | ${ip_address}
| | And PETR configuration from VAT should be | ${node} | enabled
-| TC12: Honeycomb configures Lisp RLOC Probing
-| | [Documentation] | Check if Honeycomb can configure Lisp RLOC Probing.
+| TC12: Honeycomb configures LISP RLOC Probing
+| | [Documentation] | Check if Honeycomb can configure LISP RLOC Probing.
| | ...
| | Given LISP state from Honeycomb should be | ${node} | ${state}
| | And LISP state from VAT should be | ${node} | ${state}
@@ -185,17 +187,17 @@
| | Then RLOC Probing from Honeycomb should be | ${node} | ${True}
| | And RLOC Probing from VAT should be | ${node} | enabled
-| TC13: Honeycomb configures Lisp Map Register
-| | [Documentation] | Check if Honeycomb can configure a Lisp Map Register.
+| TC13: Honeycomb configures LISP Map Register
+| | [Documentation] | Check if Honeycomb can configure a LISP Map Register.
| | ...
| | Given LISP state from Honeycomb should be | ${node} | ${state}
| | And LISP state from VAT should be | ${node} | ${state}
-| | When Honeycomb adds Lisp Map Register | ${node} | ${True}
+| | When Honeycomb adds LISP Map Register | ${node} | ${True}
| | Then Map Register from Honeycomb should be | ${node} | ${True}
| | And Map Register from VAT should be | ${node} | enabled
-| TC14: Honeycomb enabled Lisp PITR feature
-| | [Documentation] | Check if Honeycomb can configure the Lisp PITR feature.
+| TC14: Honeycomb enabled LISP PITR feature
+| | [Documentation] | Check if Honeycomb can configure the LISP PITR feature.
| | ...
| | Given Locator Set From Honeycomb Should Be
| | ... | ${node} | ${interface} | ${locator_set}
@@ -203,22 +205,89 @@
| | Then PITR config from Honeycomb should be | ${node} | ${locator_set}
| | And PITR config from VAT should be | ${node} | ${locator_set}
-| TC15: Honeycomb can remove configuration of Lisp features
-| | [Documentation] | Check if Honeycomb can disable all Lisp features.
+| TC15: Honeycomb can remove configuration of LISP features
+| | [Documentation] | Check if Honeycomb can disable all LISP features.
| | ...
-| | Given Map resolver from Honeycomb should be | ${node} | ${ip_address}
+| | Given Map Resolver from Honeycomb should be | ${node} | ${ip_address}
| | And PITR config from Honeycomb should be | ${node} | ${locator_set}
+| | And Map Register from Honeycomb should be | ${node} | ${True}
| | When Honeycomb disables all LISP features | ${node}
-| | Then Lisp Should Not Be Configured | ${node}
+| | Then LISP Should Not Be Configured | ${node}
+
+| TC16: Honeycomb can configure LISP for traffic test - IPv4
+| | [Documentation]
+| | ... | [Top] TG-DUT1-TG.
+| | ... | [Enc] Eth-IPv4-LISP.
+| | ... | [Cfg] On DUT1 configure IPv4 LISP static adjacencies with TG.
+| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces through\
+| | ... | DUT1 and verify LISP encapsulation of received packet.
+| | ... | [Ref] RFC6830.
+| | ...
+| | [Teardown] | LISP Functional Traffic Test Teardown
+| | Given Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip4} | ${prefix_len4}
+| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip4} | ${prefix_len4}
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${src_ip4} | ${tg_to_dut_if1_mac}
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${tg_to_dut_if2_ip4} | ${tg_to_dut_if2_mac}
+| | When Honeycomb enables LISP | ${node}
+| | And Honeycomb adds locator set | ${node} | ${dut_to_tg_if2} | ${locator_set}
+| | And Honeycomb adds LISP mapping | ${node} | ${lisp_traffic_ip4}
+| | Then send packet and verify LISP encap
+| | ... | ${tg_node} | ${src_ip4} | ${dst_ip4}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
+| | ... | ${src_rloc4} | ${dst_rloc4}
+
+| TC17: Honeycomb can configure LISP for traffic test - IPv6
+| | [Documentation]
+| | ... | [Top] TG-DUT1-TG.
+| | ... | [Enc] Eth-IPv6-LISP.
+| | ... | [Cfg] On DUT1 configure IPv6 LISP static adjacencies with TG.
+| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces through\
+| | ... | DUT1 and verify LISP encapsulation of received packet.
+| | ... | [Ref] RFC6830.
+| | ...
+| | [Teardown] | LISP Functional Traffic Test Teardown
+| | Given Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets interface IPv6 address | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_len6}
+| | And Honeycomb sets interface IPv6 address | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_len6}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${src_ip6} | ${tg_to_dut_if1_mac}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${tg_to_dut_if2_ip6} | ${tg_to_dut_if2_mac}
+| | When Honeycomb enables LISP | ${node}
+| | And Honeycomb adds locator set | ${node} | ${dut_to_tg_if2} | ${locator_set}
+| | And Honeycomb adds LISP mapping | ${node} | ${lisp_traffic_ip6}
+| | Then send packet and verify LISP encap
+| | ... | ${tg_node} | ${src_ip6} | ${dst_ip6}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
+| | ... | ${src_rloc6} | ${dst_rloc6}
-| TC16: Honeycomb configures Lisp Map Request Mode
-| | [Documentation] | Check if Honeycomb can configure Lisp Map Request mode.
+| TC18: Honeycomb configures LISP Map Request Mode
+| | [Documentation] | Check if Honeycomb can configure LISP Map Request mode.
| | ... | Note: Map Request Mode cannot be removed once configured.
| | ...
| | [Teardown] | Honeycomb disables LISP | ${node}
| | ...
-| | Given Honeycomb enables LISP | ${node}
-| | When Honeycomb sets Lisp Map Request Mode | ${node} | ${True}
+| | Given Honeycomb Enables LISP | ${node}
+| | When Honeycomb sets LISP Map Request Mode | ${node} | ${True}
| | Then Map Request Mode from Honeycomb should be
| | ... | ${node} | source-destination
| | And Map Request Mode from VAT should be | ${node} | src-dst
diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-lispgpe-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-lispgpe-apihc-apivat-func.robot
new file mode 100644
index 0000000000..072d475417
--- /dev/null
+++ b/tests/vpp/func/honeycomb/mgmt-cfg-lispgpe-apihc-apivat-func.robot
@@ -0,0 +1,240 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables***
+| ${interface}= | ${node['interfaces']['port1']['name']}
+
+*** Settings ***
+| Library | resources.libraries.python.Trace.Trace
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/lisp_gpe.robot
+| Variables | resources/test_data/honeycomb/lisp/lisp_gpe.py
+| ...
+| Documentation | *Honeycomb LISP GPE test suite.*
+| ...
+| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
+| ...
+| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
+| ...
+| Force Tags | HC_FUNC
+
+*** Test Cases ***
+| TC01: Honeycomb enables LISP GPE feature
+| | [Documentation] | Check if Honeycomb can enable the LISP GPE feature.
+| | ...
+| | [Tags] | HC_FUNC | test
+| | Given LISP GPE Should Not Be Configured | ${node}
+| | When Honeycomb enables LISP GPE | ${node}
+| | Then LISP GPE state from Honeycomb should be | ${node} | enabled
+| | And LISP GPE state from VAT should be | ${node} | enabled
+
+| TC02: Honeycomb disable LISP GPE feature
+| | [Documentation] | Check if Honeycomb can enable the LISP GPE feature.
+| | ...
+| | [Tags] | HC_FUNC
+| | [Teardown] | Honeycomb enables LISP GPE | ${node}
+| | Given LISP GPE state from Honeycomb should be | ${node} | enabled
+| | And LISP GPE state from VAT should be | ${node} | enabled
+| | When Honeycomb disables LISP GPE | ${node}
+| | Then LISP GPE state from Honeycomb should be | ${node} | disabled
+| | And LISP GPE state from VAT should be | ${node} | disabled
+
+| TC03: Honeycomb configures LISP GPE mapping - negative, IPv4
+| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
+| | ... | with VRF.
+| | ...
+| | [Tags] | HC_FUNC
+| | Given LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+| | When Honeycomb adds first LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4}
+| | Then LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${negative_mapping_ip4}
+
+| TC04: Honeycomb can remove LISP GPE mapping
+| | [Documentation] | Check if Honeycomb can remove a configured LISP GPE\
+| | ... | mapping.
+| | ...
+| | [Tags] | HC_FUNC
+| | Given LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${negative_mapping_ip4}
+| | When Honeycomb removes LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4['id']}
+| | Then LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+
+| TC05: Honeycomb configures LISP GPE mapping - positive, IPv4
+| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
+| | ... | with VRF.
+| | ...
+# | | [Tags] | HC_FUNC
+# Disabled due to VPP-915 - configuring positive entry crashes VPP
+| | [Teardown] | Honeycomb removes LISP GPE mapping
+| | ... | ${node} | ${positive_mapping_ip4['id']}
+| | Given LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+| | When Honeycomb adds first LISP GPE mapping
+| | ... | ${node} | ${positive_mapping_ip4}
+| | Then LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${positive_mapping_ip4}
+
+| TC06: Honeycomb configures LISP GPE mapping - negative, IPv6
+| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
+| | ... | with VRF.
+| | ...
+| | [Tags] | HC_FUNC
+| | [Teardown] | Honeycomb removes LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip6['id']}
+| | Given LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+| | When Honeycomb adds first LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip6}
+| | Then LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${negative_mapping_ip6}
+
+| TC07: Honeycomb configures LISP GPE mapping - positive, IPv6
+| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
+| | ... | with VRF.
+| | ...
+# | | [Tags] | HC_FUNC
+# Disabled due to VPP-915 - configuring positive entry crashes VPP
+| | [Teardown] | Honeycomb removes LISP GPE mapping
+| | ... | ${node} | ${positive_mapping_ip6['id']}
+| | Given LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+| | When Honeycomb adds first LISP GPE mapping
+| | ... | ${node} | ${positive_mapping_ip6}
+| | Then LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${positive_mapping_ip6}
+
+| TC08: Honeycomb can modify existing LISP GPE mappping
+| | [Documentation] | Check if Honeycomb can modify and existing LISP GPE\
+| | ... | mapping.
+| | ...
+| | [Tags] | HC_FUNC
+| | [Teardown] | Honeycomb removes LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4_edit['id']}
+| | Given LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+| | When Honeycomb adds first LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4}
+| | Then LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${negative_mapping_ip4}
+| | When Honeycomb adds first LISP GPE mapping | ${node}
+| | ... | ${negative_mapping_ip4_edit}
+| | Then LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${negative_mapping_ip4_edit}
+
+| TC09: Honeycomb can configure multiple LISP GPE mapppings
+| | [Documentation] | Check if Honeycomb can configure multiple LISP GPE\
+| | ... | mappings at the same time.
+| | ...
+| | [Tags] | HC_FUNC
+| | [Teardown] | Run Keywords
+| | ... | Honeycomb removes LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4['id']}
+| | ... | AND | Honeycomb removes LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4_2['id']}
+| | Given LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+| | When Honeycomb adds first LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4}
+| | And Honeycomb adds LISP GPE mapping | ${node} | ${negative_mapping_ip4_2}
+| | Then LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${negative_mapping_ip4}
+| | And LISP GPE mapping from Honeycomb should be
+| | ... | ${node} | ${negative_mapping_ip4_2}
+
+| TC10: Honeycomb can disable all LISP GPE features
+| | [Documentation] | Check if Honeycomb can disable all LISP GPE features.
+| | ...
+| | [Tags] | HC_FUNC
+| | Given Honeycomb adds first LISP GPE mapping
+| | ... | ${node} | ${negative_mapping_ip4}
+| | When Honeycomb disables all LISP GPE features | ${node}
+| | Then LISP GPE mappings from Honeycomb should not exist
+| | ... | ${node}
+| | And LISP GPE state from Honeycomb should be | ${node} | disabled
+| | And LISP GPE state from VAT should be | ${node} | disabled
+
+| TC11: Honeycomb can configure LISP GPE for traffic test - IPv4
+| | [Documentation]
+| | ... | [Top] TG-DUT1-TG.
+| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4
+| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1.
+| | ... | [Ver] Case: ip4-lispgpe-ip4 - phy2lisp
+| | ... | Make TG send ICMPv4 Echo Req between its interfaces through DUT1\
+| | ... | LISP GPE tunnel verify LISP encapsulation of received packet.
+| | ... | [Ref] RFC6830.
+| | ...
+| | [Tags] | test
+| | [Teardown] | LISPGPE functional traffic test teardown
+| | Given Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip4} | ${prefix_len4}
+| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip4} | ${prefix_len4}
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${src_ip4} | ${tg_to_dut_if1_mac}
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${tg_to_dut_if2_ip4} | ${tg_to_dut_if2_mac}
+| | When Honeycomb enables LISP GPE | ${node}
+| | And Honeycomb adds LISP GPE mapping | ${node} | ${lisp_traffic_ip4}
+| | Then send packet and verify LISP GPE encap
+| | ... | ${tg_node} | ${src_ip4} | ${dst_ip4}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
+| | ... | ${src_rloc4} | ${dst_rloc4}
+
+| TC12: Honeycomb can configure LISP GPE for traffic test - IPv6
+| | [Documentation]
+| | ... | [Top] TG-DUT1-TG.
+| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6
+| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1.
+| | ... | [Ver] Case: ip6-lispgpe-ip6 - phy2lisp
+| | ... | Make TG send ICMPv6 Echo Req between its interfaces through DUT1\
+| | ... | LISP GPE tunnel verify LISP encapsulation of received packet.
+| | ... | [Ref] RFC6830.
+| | ...
+| | [Tags] | test
+| | [Teardown] | LISPGPE functional traffic test teardown
+| | Given Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets interface IPv6 address | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_len6}
+| | And Honeycomb sets interface IPv6 address | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_len6}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${src_ip6} | ${tg_to_dut_if1_mac}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${tg_to_dut_if2_ip6} | ${tg_to_dut_if2_mac}
+| | When Honeycomb enables LISP GPE | ${node}
+| | And Honeycomb adds LISP GPE mapping | ${node} | ${lisp_traffic_ip6}
+| | Then send packet and verify LISP GPE encap
+| | ... | ${tg_node} | ${src_ip6} | ${dst_ip6}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
+| | ... | ${src_rloc6} | ${dst_rloc6}