Initial commit: cframework. Longbow and Libparc

Change-Id: I90378dbd30da6033b20fb1f829b3b822cf366c59
Signed-off-by: Luca Muscariello <lumuscar+fdio@cisco.com>

1 files changed, 238 insertions, 0 deletions

diff --git a/libparc/parc/developer/parc_Timing.h b/libparc/parc/developer/parc_Timing.h
new file mode 100755
index 00000000..bd5c3340
--- /dev/null
+++ b/libparc/parc/developer/parc_Timing.h
@@ -0,0 +1,238 @@
+/*
+ * Copyright (c) 2017 Cisco and/or its affiliates.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * @file parc_Timing.h
+ * @ingroup developer
+ * @brief Macros for timing code
+ *
+ * These macros allow the developer to measure time spent in sections of code.
+ *    On Intel platforms (i386 or x86_64), the timing is done with the TSC counter, so it will be measured in CPU cycles.
+ *    On non-Intel Linux platforms, it will be be done with the nano-second oscillator clock (CLOCK_MONOTONIC_RAW).
+ *    On Darwin, it will use the nano-second SYSTEM_CLOCK.
+ *    Otherwise, uses gettimeofday(), which will be micro-second timing.
+ *
+ * This set of headers will define several macros for timing:
+ *    parcTiming_Init(prefix)
+ *    parcTiming_Fini(prefix)
+ *    parcTiming_Start(prefix)
+ *    parcTiming_Stop(prefix)
+ *    (uint64_t) parcTiming_Delta(prefix)
+ *
+ * The units returned from parcTiming_Delta() will be consistent, but not necessarily
+ * related to wall clock time, real time, or any discernable time unit.  For example, they
+ * may be in CPU instruction cycles or raw oscillator ticks or nano-seconds.
+ *
+ * These macros only work if the user defines PARCTIMING_ENABLE.  Otherwise, they do not
+ * generate any instructions and parcTiming_Delta will always return 0.
+ *
+ * @code
+ * #define PARCTIMING_ENABLE 1
+ * #include <parc/developer/parc_Timing.h>
+ *
+ * void
+ * foo(void)
+ * {
+ *    parcTiming_Init(_foo);
+ *    // ... other stuff ..
+ *    parcTiming_Start(_foo);
+ *    // ... stuff to measure ...
+ *    parcTiming_Stop(_foo);
+ *
+ *    uint64_t delta = parcTiming_Delta(_foo);
+ *    parcTiming_Fini(_foo)
+ * }
+ * @endcode
+ *
+ */
+#ifndef libparc_parc_Timing_h
+#define libparc_parc_Timing_h
+
+#if defined(PARCTIMING_ENABLE)
+// begin platform detection
+#if defined(__i386__) || defined(__x86_64__)
+#define PARCTIMING_INTEL
+#include <parc/developer/parc_TimingIntel.h>
+#elif defined(__APPLE__)
+#define PARCTIMING_DARWIN
+#include <parc/developer/parc_TimingDarwin.h>
+#elif defined(__linux__)
+#define PARCTIMING_LINUX
+#include <parc/developer/parc_TimingLinux.h>
+#else
+#define PARCTIMING_GENERIC
+#include <parc/developer/parc_TimingGeneric.h>
+#endif // platform detection
+#else // PARCTIMING_ENABLE
+#define _private_parcTiming_Init(prefix)
+#define _private_parcTiming_Start(prefix)
+#define _private_parcTiming_Stop(prefix)
+#define _private_parcTiming_Delta(prefix) ((uint64_t) 0)
+#define _private_parcTiming_Fini(prefix)
+#endif // PARCTIMING_ENABLE
+
+/**
+ * Initialize the timing facility for namespace prefix `prefix`
+ *
+ * Used inside a code block, this macro will define several variables prefixed with
+ * the name `prefix`.  It may also allocate memory or system resources.  It must be used
+ * within a function scope, not at a global scope.
+ *
+ * You must use parcTiming_Fini(prefix) when done with the timing facility.
+ *
+ * If `PARCTIMING_ENABLE` is not defined before including the header file, this function is a no-op.
+ *
+ * @param [in] prefix The namespace prefix used for variables in scope.
+ *
+ * Example:
+ * @code
+ * #define PARCTIMING_ENABLE 1
+ * #include <parc/developer/parc_Timing.h>
+ *
+ * void
+ * foo(void)
+ * {
+ *    parcTiming_Init(_foo);
+ *    parcTiming_Start(_foo);
+ *    // ... stuff to measure ...
+ *    parcTiming_Stop(_foo);
+ *
+ *    uint64_t delta = parcTiming_Delta(_foo);
+ *    parcTiming_Fini(_foo)
+ * }
+ * @endcode
+ */
+#define parcTiming_Init(prefix) _private_parcTiming_Init(prefix)
+
+/**
+ * Marks the time in the start variable
+ *
+ * Records the current time in the start variable for use by parcTiming_Delta().
+ *
+ * If PARCTIMING_ENABLE is not defined before including the header file, this function is a no-op.
+ *
+ * @param [in] prefix The namespace prefix used for variables in scope.
+ *
+ * Example:
+ * @code
+ * #define PARCTIMING_ENABLE 1
+ * #include <parc/developer/parc_Timing.h>
+ *
+ * void
+ * foo(void)
+ * {
+ *    parcTiming_Init(_foo);
+ *    parcTiming_Start(_foo);
+ *    // ... stuff to measure ...
+ *    parcTiming_Stop(_foo);
+ *
+ *    uint64_t delta = parcTiming_Delta(_foo);
+ *    parcTiming_Fini(_foo)
+ * }
+ * @endcode
+ */
+#define parcTiming_Start(prefix) _private_parcTiming_Start(prefix)
+
+/**
+ * Marks the time in the stop variable
+ *
+ * Records the current time in the stop variable for use by parcTiming_Delta().
+ *
+ * If PARCTIMING_ENABLE is not defined before including the header file, this function is a no-op.
+ *
+ * @param [in] prefix The namespace prefix used for variables in scope.
+ *
+ * Example:
+ * @code
+ * #define PARCTIMING_ENABLE 1
+ * #include <parc/developer/parc_Timing.h>
+ *
+ * void
+ * foo(void)
+ * {
+ *    parcTiming_Init(_foo);
+ *    parcTiming_Start(_foo);
+ *    // ... stuff to measure ...
+ *    parcTiming_Stop(_foo);
+ *
+ *    uint64_t delta = parcTiming_Delta(_foo);
+ *    parcTiming_Fini(_foo)
+ * }
+ * @endcode
+ */
+#define parcTiming_Stop(prefix) _private_parcTiming_Stop(prefix)
+
+/**
+ * Returns the number of ticks between calls to start and stop.
+ *
+ * The delta will be in whatever units the best clock and provide.  It may be CPU cycles
+ * or oscillator ticks, or nanos, or in the worst case micros.
+ *
+ * If PARCTIMING_ENABLE is not defined before including the header file, this function is a no-op.
+ *
+ * @param [in] prefix The namespace prefix used for variables in scope.
+ *
+ * @return uint64_t The number of ticks between start and stop
+ *
+ * Example:
+ * @code
+ * #define PARCTIMING_ENABLE 1
+ * #include <parc/developer/parc_Timing.h>
+ *
+ * void
+ * foo(void)
+ * {
+ *    parcTiming_Init(_foo);
+ *    parcTiming_Start(_foo);
+ *    // ... stuff to measure ...
+ *    parcTiming_Stop(_foo);
+ *
+ *    uint64_t delta = parcTiming_Delta(_foo);
+ *    parcTiming_Fini(_foo)
+ * }
+ * @endcode
+ */
+#define parcTiming_Delta(prefix) _private_parcTiming_Delta(prefix)
+
+/**
+ * Finalized the timing, releasing any system resources or memory
+ *
+ * Must be called when done with each namespace initialized by parcTiming_Init().
+ *
+ * If PARCTIMING_ENABLE is not defined before including the header file, this function is a no-op.
+ *
+ * @param [in] prefix The namespace prefix used for variables in scope.
+ *
+ * Example:
+ * @code
+ * #define PARCTIMING_ENABLE 1
+ * #include <parc/developer/parc_Timing.h>
+ *
+ * void
+ * foo(void)
+ * {
+ *    parcTiming_Init(_foo);
+ *    parcTiming_Start(_foo);
+ *    // ... stuff to measure ...
+ *    parcTiming_Stop(_foo);
+ *
+ *    uint64_t delta = parcTiming_Delta(_foo);
+ *    parcTiming_Fini(_foo)
+ * }
+ * @endcode
+ */
+#define parcTiming_Fini(prefix) _private_parcTiming_Fini(prefix)
+#endif // libparc_parc_Timing_h
+