diff options
Diffstat (limited to 'external/libcurl_android/jni/libcurl/lib/multi.c')
| -rwxr-xr-x | external/libcurl_android/jni/libcurl/lib/multi.c | 2835 |
1 files changed, 2835 insertions, 0 deletions
diff --git a/external/libcurl_android/jni/libcurl/lib/multi.c b/external/libcurl_android/jni/libcurl/lib/multi.c new file mode 100755 index 00000000..a1dc2c82 --- /dev/null +++ b/external/libcurl_android/jni/libcurl/lib/multi.c @@ -0,0 +1,2835 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at http://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ + +#include "curl_setup.h" + +#include <curl/curl.h> + +#include "urldata.h" +#include "transfer.h" +#include "url.h" +#include "connect.h" +#include "progress.h" +#include "easyif.h" +#include "share.h" +#include "multiif.h" +#include "sendf.h" +#include "timeval.h" +#include "http.h" +#include "select.h" +#include "warnless.h" +#include "speedcheck.h" +#include "conncache.h" +#include "bundles.h" +#include "multihandle.h" +#include "pipeline.h" +#include "sigpipe.h" + +#define _MPRINTF_REPLACE /* use our functions only */ +#include <curl/mprintf.h> + +#include "curl_memory.h" +/* The last #include file should be: */ +#include "memdebug.h" + +/* + CURL_SOCKET_HASH_TABLE_SIZE should be a prime number. Increasing it from 97 + to 911 takes on a 32-bit machine 4 x 804 = 3211 more bytes. Still, every + CURL handle takes 45-50 K memory, therefore this 3K are not significant. +*/ +#ifndef CURL_SOCKET_HASH_TABLE_SIZE +#define CURL_SOCKET_HASH_TABLE_SIZE 911 +#endif + +#define CURL_CONNECTION_HASH_SIZE 97 + +#define CURL_MULTI_HANDLE 0x000bab1e + +#define GOOD_MULTI_HANDLE(x) \ + ((x) && (((struct Curl_multi *)(x))->type == CURL_MULTI_HANDLE)) +#define GOOD_EASY_HANDLE(x) \ + ((x) && (((struct SessionHandle *)(x))->magic == CURLEASY_MAGIC_NUMBER)) + +static void singlesocket(struct Curl_multi *multi, + struct SessionHandle *data); +static int update_timer(struct Curl_multi *multi); + +static bool isHandleAtHead(struct SessionHandle *handle, + struct curl_llist *pipeline); +static CURLMcode add_next_timeout(struct timeval now, + struct Curl_multi *multi, + struct SessionHandle *d); +static CURLMcode multi_timeout(struct Curl_multi *multi, + long *timeout_ms); + +#ifdef DEBUGBUILD +static const char * const statename[]={ + "INIT", + "CONNECT_PEND", + "CONNECT", + "WAITRESOLVE", + "WAITCONNECT", + "WAITPROXYCONNECT", + "PROTOCONNECT", + "WAITDO", + "DO", + "DOING", + "DO_MORE", + "DO_DONE", + "WAITPERFORM", + "PERFORM", + "TOOFAST", + "DONE", + "COMPLETED", + "MSGSENT", +}; +#endif + +static void multi_freetimeout(void *a, void *b); + +/* always use this function to change state, to make debugging easier */ +static void mstate(struct SessionHandle *data, CURLMstate state +#ifdef DEBUGBUILD + , int lineno +#endif +) +{ +#ifdef DEBUGBUILD + long connection_id = -5000; +#endif + CURLMstate oldstate = data->mstate; + + if(oldstate == state) + /* don't bother when the new state is the same as the old state */ + return; + + data->mstate = state; + +#ifdef DEBUGBUILD + if(data->mstate >= CURLM_STATE_CONNECT_PEND && + data->mstate < CURLM_STATE_COMPLETED) { + if(data->easy_conn) + connection_id = data->easy_conn->connection_id; + + infof(data, + "STATE: %s => %s handle %p; line %d (connection #%ld) \n", + statename[oldstate], statename[data->mstate], + (void *)data, lineno, connection_id); + } +#endif + if(state == CURLM_STATE_COMPLETED) + /* changing to COMPLETED means there's one less easy handle 'alive' */ + data->multi->num_alive--; +} + +#ifndef DEBUGBUILD +#define multistate(x,y) mstate(x,y) +#else +#define multistate(x,y) mstate(x,y, __LINE__) +#endif + +/* + * We add one of these structs to the sockhash for a particular socket + */ + +struct Curl_sh_entry { + struct SessionHandle *easy; + time_t timestamp; + int action; /* what action READ/WRITE this socket waits for */ + curl_socket_t socket; /* mainly to ease debugging */ + void *socketp; /* settable by users with curl_multi_assign() */ +}; +/* bits for 'action' having no bits means this socket is not expecting any + action */ +#define SH_READ 1 +#define SH_WRITE 2 + +/* make sure this socket is present in the hash for this handle */ +static struct Curl_sh_entry *sh_addentry(struct curl_hash *sh, + curl_socket_t s, + struct SessionHandle *data) +{ + struct Curl_sh_entry *there = + Curl_hash_pick(sh, (char *)&s, sizeof(curl_socket_t)); + struct Curl_sh_entry *check; + + if(there) + /* it is present, return fine */ + return there; + + /* not present, add it */ + check = calloc(1, sizeof(struct Curl_sh_entry)); + if(!check) + return NULL; /* major failure */ + check->easy = data; + check->socket = s; + + /* make/add new hash entry */ + if(NULL == Curl_hash_add(sh, (char *)&s, sizeof(curl_socket_t), check)) { + free(check); + return NULL; /* major failure */ + } + + return check; /* things are good in sockhash land */ +} + + +/* delete the given socket + handle from the hash */ +static void sh_delentry(struct curl_hash *sh, curl_socket_t s) +{ + struct Curl_sh_entry *there = + Curl_hash_pick(sh, (char *)&s, sizeof(curl_socket_t)); + + if(there) { + /* this socket is in the hash */ + /* We remove the hash entry. (This'll end up in a call to + sh_freeentry().) */ + Curl_hash_delete(sh, (char *)&s, sizeof(curl_socket_t)); + } +} + +/* + * free a sockhash entry + */ +static void sh_freeentry(void *freethis) +{ + struct Curl_sh_entry *p = (struct Curl_sh_entry *) freethis; + + if(p) + free(p); +} + +static size_t fd_key_compare(void *k1, size_t k1_len, void *k2, size_t k2_len) +{ + (void) k1_len; (void) k2_len; + + return (*((int *) k1)) == (*((int *) k2)); +} + +static size_t hash_fd(void *key, size_t key_length, size_t slots_num) +{ + int fd = *((int *) key); + (void) key_length; + + return (fd % (int)slots_num); +} + +/* + * sh_init() creates a new socket hash and returns the handle for it. + * + * Quote from README.multi_socket: + * + * "Some tests at 7000 and 9000 connections showed that the socket hash lookup + * is somewhat of a bottle neck. Its current implementation may be a bit too + * limiting. It simply has a fixed-size array, and on each entry in the array + * it has a linked list with entries. So the hash only checks which list to + * scan through. The code I had used so for used a list with merely 7 slots + * (as that is what the DNS hash uses) but with 7000 connections that would + * make an average of 1000 nodes in each list to run through. I upped that to + * 97 slots (I believe a prime is suitable) and noticed a significant speed + * increase. I need to reconsider the hash implementation or use a rather + * large default value like this. At 9000 connections I was still below 10us + * per call." + * + */ +static struct curl_hash *sh_init(int hashsize) +{ + return Curl_hash_alloc(hashsize, hash_fd, fd_key_compare, + sh_freeentry); +} + +/* + * multi_addmsg() + * + * Called when a transfer is completed. Adds the given msg pointer to + * the list kept in the multi handle. + */ +static CURLMcode multi_addmsg(struct Curl_multi *multi, + struct Curl_message *msg) +{ + if(!Curl_llist_insert_next(multi->msglist, multi->msglist->tail, msg)) + return CURLM_OUT_OF_MEMORY; + + return CURLM_OK; +} + +/* + * multi_freeamsg() + * + * Callback used by the llist system when a single list entry is destroyed. + */ +static void multi_freeamsg(void *a, void *b) +{ + (void)a; + (void)b; +} + +struct Curl_multi *Curl_multi_handle(int hashsize, /* socket hash */ + int chashsize) /* connection hash */ +{ + struct Curl_multi *multi = calloc(1, sizeof(struct Curl_multi)); + + if(!multi) + return NULL; + + multi->type = CURL_MULTI_HANDLE; + + multi->hostcache = Curl_mk_dnscache(); + if(!multi->hostcache) + goto error; + + multi->sockhash = sh_init(hashsize); + if(!multi->sockhash) + goto error; + + multi->conn_cache = Curl_conncache_init(chashsize); + if(!multi->conn_cache) + goto error; + + multi->msglist = Curl_llist_alloc(multi_freeamsg); + if(!multi->msglist) + goto error; + + multi->pending = Curl_llist_alloc(multi_freeamsg); + if(!multi->pending) + goto error; + + /* allocate a new easy handle to use when closing cached connections */ + multi->closure_handle = curl_easy_init(); + if(!multi->closure_handle) + goto error; + + multi->closure_handle->multi = multi; + multi->closure_handle->state.conn_cache = multi->conn_cache; + + multi->max_pipeline_length = 5; + + /* -1 means it not set by user, use the default value */ + multi->maxconnects = -1; + return (CURLM *) multi; + + error: + + Curl_hash_destroy(multi->sockhash); + multi->sockhash = NULL; + Curl_hash_destroy(multi->hostcache); + multi->hostcache = NULL; + Curl_conncache_destroy(multi->conn_cache); + multi->conn_cache = NULL; + Curl_close(multi->closure_handle); + multi->closure_handle = NULL; + Curl_llist_destroy(multi->msglist, NULL); + Curl_llist_destroy(multi->pending, NULL); + + free(multi); + return NULL; +} + +CURLM *curl_multi_init(void) +{ + return Curl_multi_handle(CURL_SOCKET_HASH_TABLE_SIZE, + CURL_CONNECTION_HASH_SIZE); +} + +CURLMcode curl_multi_add_handle(CURLM *multi_handle, + CURL *easy_handle) +{ + struct curl_llist *timeoutlist; + struct Curl_multi *multi = (struct Curl_multi *)multi_handle; + struct SessionHandle *data = (struct SessionHandle *)easy_handle; + + /* First, make some basic checks that the CURLM handle is a good handle */ + if(!GOOD_MULTI_HANDLE(multi)) + return CURLM_BAD_HANDLE; + + /* Verify that we got a somewhat good easy handle too */ + if(!GOOD_EASY_HANDLE(easy_handle)) + return CURLM_BAD_EASY_HANDLE; + + /* Prevent users from adding same easy handle more than once and prevent + adding to more than one multi stack */ + if(data->multi) + return CURLM_ADDED_ALREADY; + + /* Allocate and initialize timeout list for easy handle */ + timeoutlist = Curl_llist_alloc(multi_freetimeout); + if(!timeoutlist) + return CURLM_OUT_OF_MEMORY; + + /* + * No failure allowed in this function beyond this point. And no + * modification of easy nor multi handle allowed before this except for + * potential multi's connection cache growing which won't be undone in this + * function no matter what. + */ + + /* Make easy handle use timeout list initialized above */ + data->state.timeoutlist = timeoutlist; + timeoutlist = NULL; + + /* set the easy handle */ + multistate(data, CURLM_STATE_INIT); + + if((data->set.global_dns_cache) && + (data->dns.hostcachetype != HCACHE_GLOBAL)) { + /* global dns cache was requested but still isn't */ + struct curl_hash *global = Curl_global_host_cache_init(); + if(global) { + /* only do this if the global cache init works */ + data->dns.hostcache = global; + data->dns.hostcachetype = HCACHE_GLOBAL; + } + } + /* for multi interface connections, we share DNS cache automatically if the + easy handle's one is currently not set. */ + else if(!data->dns.hostcache || + (data->dns.hostcachetype == HCACHE_NONE)) { + data->dns.hostcache = multi->hostcache; + data->dns.hostcachetype = HCACHE_MULTI; + } + + /* Point to the multi's connection cache */ + data->state.conn_cache = multi->conn_cache; + + data->state.infilesize = data->set.filesize; + + /* This adds the new entry at the 'end' of the doubly-linked circular + list of SessionHandle structs to try and maintain a FIFO queue so + the pipelined requests are in order. */ + + /* We add this new entry last in the list. */ + + data->next = NULL; /* end of the line */ + if(multi->easyp) { + struct SessionHandle *last = multi->easylp; + last->next = data; + data->prev = last; + multi->easylp = data; /* the new last node */ + } + else { + /* first node, make both prev and next be NULL! */ + data->next = NULL; + data->prev = NULL; + multi->easylp = multi->easyp = data; /* both first and last */ + } + + /* make the SessionHandle refer back to this multi handle */ + data->multi = multi_handle; + + /* Set the timeout for this handle to expire really soon so that it will + be taken care of even when this handle is added in the midst of operation + when only the curl_multi_socket() API is used. During that flow, only + sockets that time-out or have actions will be dealt with. Since this + handle has no action yet, we make sure it times out to get things to + happen. */ + Curl_expire(data, 1); + + /* increase the node-counter */ + multi->num_easy++; + + /* increase the alive-counter */ + multi->num_alive++; + + /* A somewhat crude work-around for a little glitch in update_timer() that + happens if the lastcall time is set to the same time when the handle is + removed as when the next handle is added, as then the check in + update_timer() that prevents calling the application multiple times with + the same timer infor will not trigger and then the new handle's timeout + will not be notified to the app. + + The work-around is thus simply to clear the 'lastcall' variable to force + update_timer() to always trigger a callback to the app when a new easy + handle is added */ + memset(&multi->timer_lastcall, 0, sizeof(multi->timer_lastcall)); + + update_timer(multi); + return CURLM_OK; +} + +#if 0 +/* Debug-function, used like this: + * + * Curl_hash_print(multi->sockhash, debug_print_sock_hash); + * + * Enable the hash print function first by editing hash.c + */ +static void debug_print_sock_hash(void *p) +{ + struct Curl_sh_entry *sh = (struct Curl_sh_entry *)p; + + fprintf(stderr, " [easy %p/magic %x/socket %d]", + (void *)sh->data, sh->data->magic, (int)sh->socket); +} +#endif + +CURLMcode curl_multi_remove_handle(CURLM *multi_handle, + CURL *curl_handle) +{ + struct Curl_multi *multi=(struct Curl_multi *)multi_handle; + struct SessionHandle *easy = curl_handle; + struct SessionHandle *data = easy; + + /* First, make some basic checks that the CURLM handle is a good handle */ + if(!GOOD_MULTI_HANDLE(multi)) + return CURLM_BAD_HANDLE; + + /* Verify that we got a somewhat good easy handle too */ + if(!GOOD_EASY_HANDLE(curl_handle)) + return CURLM_BAD_EASY_HANDLE; + + /* Prevent users from trying to remove same easy handle more than once */ + if(!data->multi) + return CURLM_OK; /* it is already removed so let's say it is fine! */ + + if(easy) { + bool premature = (data->mstate < CURLM_STATE_COMPLETED) ? TRUE : FALSE; + bool easy_owns_conn = (data->easy_conn && + (data->easy_conn->data == easy)) ? + TRUE : FALSE; + + /* If the 'state' is not INIT or COMPLETED, we might need to do something + nice to put the easy_handle in a good known state when this returns. */ + if(premature) + /* this handle is "alive" so we need to count down the total number of + alive connections when this is removed */ + multi->num_alive--; + + if(data->easy_conn && + (data->easy_conn->send_pipe->size + + data->easy_conn->recv_pipe->size > 1) && + data->mstate > CURLM_STATE_WAITDO && + data->mstate < CURLM_STATE_COMPLETED) { + /* If the handle is in a pipeline and has started sending off its + request but not received its response yet, we need to close + connection. */ + connclose(data->easy_conn, "Removed with partial response"); + /* Set connection owner so that Curl_done() closes it. + We can sefely do this here since connection is killed. */ + data->easy_conn->data = easy; + } + + /* The timer must be shut down before data->multi is set to NULL, + else the timenode will remain in the splay tree after + curl_easy_cleanup is called. */ + Curl_expire(data, 0); + + /* destroy the timeout list that is held in the easy handle */ + if(data->state.timeoutlist) { + Curl_llist_destroy(data->state.timeoutlist, NULL); + data->state.timeoutlist = NULL; + } + + if(data->dns.hostcachetype == HCACHE_MULTI) { + /* stop using the multi handle's DNS cache */ + data->dns.hostcache = NULL; + data->dns.hostcachetype = HCACHE_NONE; + } + + if(data->easy_conn) { + + /* we must call Curl_done() here (if we still "own it") so that we don't + leave a half-baked one around */ + if(easy_owns_conn) { + + /* Curl_done() clears the conn->data field to lose the association + between the easy handle and the connection + + Note that this ignores the return code simply because there's + nothing really useful to do with it anyway! */ + (void)Curl_done(&data->easy_conn, data->result, premature); + } + else + /* Clear connection pipelines, if Curl_done above was not called */ + Curl_getoff_all_pipelines(data, data->easy_conn); + } + + Curl_wildcard_dtor(&data->wildcard); + + /* as this was using a shared connection cache we clear the pointer + to that since we're not part of that multi handle anymore */ + data->state.conn_cache = NULL; + + /* change state without using multistate(), only to make singlesocket() do + what we want */ + data->mstate = CURLM_STATE_COMPLETED; + singlesocket(multi, easy); /* to let the application know what sockets + that vanish with this handle */ + + /* Remove the association between the connection and the handle */ + if(data->easy_conn) { + data->easy_conn->data = NULL; + data->easy_conn = NULL; + } + + data->multi = NULL; /* clear the association to this multi handle */ + + { + /* make sure there's no pending message in the queue sent from this easy + handle */ + struct curl_llist_element *e; + + for(e = multi->msglist->head; e; e = e->next) { + struct Curl_message *msg = e->ptr; + + if(msg->extmsg.easy_handle == easy) { + Curl_llist_remove(multi->msglist, e, NULL); + /* there can only be one from this specific handle */ + break; + } + } + } + + /* make the previous node point to our next */ + if(data->prev) + data->prev->next = data->next; + else + multi->easyp = data->next; /* point to first node */ + + /* make our next point to our previous node */ + if(data->next) + data->next->prev = data->prev; + else + multi->easylp = data->prev; /* point to last node */ + + /* NOTE NOTE NOTE + We do not touch the easy handle here! */ + + multi->num_easy--; /* one less to care about now */ + + update_timer(multi); + return CURLM_OK; + } + else + return CURLM_BAD_EASY_HANDLE; /* twasn't found */ +} + +bool Curl_multi_pipeline_enabled(const struct Curl_multi *multi) +{ + return (multi && multi->pipelining_enabled) ? TRUE : FALSE; +} + +void Curl_multi_handlePipeBreak(struct SessionHandle *data) +{ + data->easy_conn = NULL; +} + +static int waitconnect_getsock(struct connectdata *conn, + curl_socket_t *sock, + int numsocks) +{ + int i; + int s=0; + int rc=0; + + if(!numsocks) + return GETSOCK_BLANK; + + for(i=0; i<2; i++) { + if(conn->tempsock[i] != CURL_SOCKET_BAD) { + sock[s] = conn->tempsock[i]; + rc |= GETSOCK_WRITESOCK(s++); + } + } + + /* when we've sent a CONNECT to a proxy, we should rather wait for the + socket to become readable to be able to get the response headers */ + if(conn->tunnel_state[FIRSTSOCKET] == TUNNEL_CONNECT) { + sock[0] = conn->sock[FIRSTSOCKET]; + rc = GETSOCK_READSOCK(0); + } + + return rc; +} + +static int domore_getsock(struct connectdata *conn, + curl_socket_t *socks, + int numsocks) +{ + if(conn && conn->handler->domore_getsock) + return conn->handler->domore_getsock(conn, socks, numsocks); + return GETSOCK_BLANK; +} + +/* returns bitmapped flags for this handle and its sockets */ +static int multi_getsock(struct SessionHandle *data, + curl_socket_t *socks, /* points to numsocks number + of sockets */ + int numsocks) +{ + /* If the pipe broke, or if there's no connection left for this easy handle, + then we MUST bail out now with no bitmask set. The no connection case can + happen when this is called from curl_multi_remove_handle() => + singlesocket() => multi_getsock(). + */ + if(data->state.pipe_broke || !data->easy_conn) + return 0; + + if(data->mstate > CURLM_STATE_CONNECT && + data->mstate < CURLM_STATE_COMPLETED) { + /* Set up ownership correctly */ + data->easy_conn->data = data; + } + + switch(data->mstate) { + default: +#if 0 /* switch back on these cases to get the compiler to check for all enums + to be present */ + case CURLM_STATE_TOOFAST: /* returns 0, so will not select. */ + case CURLM_STATE_COMPLETED: + case CURLM_STATE_MSGSENT: + case CURLM_STATE_INIT: + case CURLM_STATE_CONNECT: + case CURLM_STATE_WAITDO: + case CURLM_STATE_DONE: + case CURLM_STATE_LAST: + /* this will get called with CURLM_STATE_COMPLETED when a handle is + removed */ +#endif + return 0; + + case CURLM_STATE_WAITRESOLVE: + return Curl_resolver_getsock(data->easy_conn, socks, numsocks); + + case CURLM_STATE_PROTOCONNECT: + return Curl_protocol_getsock(data->easy_conn, socks, numsocks); + + case CURLM_STATE_DO: + case CURLM_STATE_DOING: + return Curl_doing_getsock(data->easy_conn, socks, numsocks); + + case CURLM_STATE_WAITPROXYCONNECT: + case CURLM_STATE_WAITCONNECT: + return waitconnect_getsock(data->easy_conn, socks, numsocks); + + case CURLM_STATE_DO_MORE: + return domore_getsock(data->easy_conn, socks, numsocks); + + case CURLM_STATE_DO_DONE: /* since is set after DO is completed, we switch + to waiting for the same as the *PERFORM + states */ + case CURLM_STATE_PERFORM: + case CURLM_STATE_WAITPERFORM: + return Curl_single_getsock(data->easy_conn, socks, numsocks); + } + +} + +CURLMcode curl_multi_fdset(CURLM *multi_handle, + fd_set *read_fd_set, fd_set *write_fd_set, + fd_set *exc_fd_set, int *max_fd) +{ + /* Scan through all the easy handles to get the file descriptors set. + Some easy handles may not have connected to the remote host yet, + and then we must make sure that is done. */ + struct Curl_multi *multi=(struct Curl_multi *)multi_handle; + struct SessionHandle *data; + int this_max_fd=-1; + curl_socket_t sockbunch[MAX_SOCKSPEREASYHANDLE]; + int bitmap; + int i; + (void)exc_fd_set; /* not used */ + + if(!GOOD_MULTI_HANDLE(multi)) + return CURLM_BAD_HANDLE; + + data=multi->easyp; + while(data) { + bitmap = multi_getsock(data, sockbunch, MAX_SOCKSPEREASYHANDLE); + + for(i=0; i< MAX_SOCKSPEREASYHANDLE; i++) { + curl_socket_t s = CURL_SOCKET_BAD; + + if((bitmap & GETSOCK_READSOCK(i)) && VALID_SOCK((sockbunch[i]))) { + FD_SET(sockbunch[i], read_fd_set); + s = sockbunch[i]; + } + if((bitmap & GETSOCK_WRITESOCK(i)) && VALID_SOCK((sockbunch[i]))) { + FD_SET(sockbunch[i], write_fd_set); + s = sockbunch[i]; + } + if(s == CURL_SOCKET_BAD) + /* this socket is unused, break out of loop */ + break; + else { + if((int)s > this_max_fd) + this_max_fd = (int)s; + } + } + + data = data->next; /* check next handle */ + } + + *max_fd = this_max_fd; + + return CURLM_OK; +} + +CURLMcode curl_multi_wait(CURLM *multi_handle, + struct curl_waitfd extra_fds[], + unsigned int extra_nfds, + int timeout_ms, + int *ret) +{ + struct Curl_multi *multi=(struct Curl_multi *)multi_handle; + struct SessionHandle *data; + curl_socket_t sockbunch[MAX_SOCKSPEREASYHANDLE]; + int bitmap; + unsigned int i; + unsigned int nfds = 0; + unsigned int curlfds; + struct pollfd *ufds = NULL; + long timeout_internal; + + if(!GOOD_MULTI_HANDLE(multi)) + return CURLM_BAD_HANDLE; + + /* If the internally desired timeout is actually shorter than requested from + the outside, then use the shorter time! But only if the internal timer + is actually larger than -1! */ + (void)multi_timeout(multi, &timeout_internal); + if((timeout_internal >= 0) && (timeout_internal < (long)timeout_ms)) + timeout_ms = (int)timeout_internal; + + /* Count up how many fds we have from the multi handle */ + data=multi->easyp; + while(data) { + bitmap = multi_getsock(data, sockbunch, MAX_SOCKSPEREASYHANDLE); + + for(i=0; i< MAX_SOCKSPEREASYHANDLE; i++) { + curl_socket_t s = CURL_SOCKET_BAD; + + if(bitmap & GETSOCK_READSOCK(i)) { + ++nfds; + s = sockbunch[i]; + } + if(bitmap & GETSOCK_WRITESOCK(i)) { + ++nfds; + s = sockbunch[i]; + } + if(s == CURL_SOCKET_BAD) { + break; + } + } + + data = data->next; /* check next handle */ + } + + curlfds = nfds; /* number of internal file descriptors */ + nfds += extra_nfds; /* add the externally provided ones */ + + if(nfds || extra_nfds) { + ufds = malloc(nfds * sizeof(struct pollfd)); + if(!ufds) + return CURLM_OUT_OF_MEMORY; + } + nfds = 0; + + /* only do the second loop if we found descriptors in the first stage run + above */ + + if(curlfds) { + /* Add the curl handles to our pollfds first */ + data=multi->easyp; + while(data) { + bitmap = multi_getsock(data, sockbunch, MAX_SOCKSPEREASYHANDLE); + + for(i=0; i< MAX_SOCKSPEREASYHANDLE; i++) { + curl_socket_t s = CURL_SOCKET_BAD; + + if(bitmap & GETSOCK_READSOCK(i)) { + ufds[nfds].fd = sockbunch[i]; + ufds[nfds].events = POLLIN; + ++nfds; + s = sockbunch[i]; + } + if(bitmap & GETSOCK_WRITESOCK(i)) { + ufds[nfds].fd = sockbunch[i]; + ufds[nfds].events = POLLOUT; + ++nfds; + s = sockbunch[i]; + } + if(s == CURL_SOCKET_BAD) { + break; + } + } + + data = data->next; /* check next handle */ + } + } + + /* Add external file descriptions from poll-like struct curl_waitfd */ + for(i = 0; i < extra_nfds; i++) { + ufds[nfds].fd = extra_fds[i].fd; + ufds[nfds].events = 0; + if(extra_fds[i].events & CURL_WAIT_POLLIN) + ufds[nfds].events |= POLLIN; + if(extra_fds[i].events & CURL_WAIT_POLLPRI) + ufds[nfds].events |= POLLPRI; + if(extra_fds[i].events & CURL_WAIT_POLLOUT) + ufds[nfds].events |= POLLOUT; + ++nfds; + } + + if(nfds) { + /* wait... */ + infof(data, "Curl_poll(%d ds, %d ms)\n", nfds, timeout_ms); + i = Curl_poll(ufds, nfds, timeout_ms); + + if(i) { + unsigned int j; + /* copy revents results from the poll to the curl_multi_wait poll + struct, the bit values of the actual underlying poll() implementation + may not be the same as the ones in the public libcurl API! */ + for(j = 0; j < extra_nfds; j++) { + unsigned short mask = 0; + unsigned r = ufds[curlfds + j].revents; + + if(r & POLLIN) + mask |= CURL_WAIT_POLLIN; + if(r & POLLOUT) + mask |= CURL_WAIT_POLLOUT; + if(r & POLLPRI) + mask |= CURL_WAIT_POLLPRI; + + extra_fds[j].revents = mask; + } + } + } + else + i = 0; + + Curl_safefree(ufds); + if(ret) + *ret = i; + return CURLM_OK; +} + +static CURLMcode multi_runsingle(struct Curl_multi *multi, + struct timeval now, + struct SessionHandle *data) +{ + struct Curl_message *msg = NULL; + bool connected; + bool async; + bool protocol_connect = FALSE; + bool dophase_done = FALSE; + bool done = FALSE; + CURLMcode result = CURLM_OK; + struct SingleRequest *k; + long timeout_ms; + int control; + + if(!GOOD_EASY_HANDLE(data)) + return CURLM_BAD_EASY_HANDLE; + + do { + /* this is a single-iteration do-while loop just to allow a + break to skip to the end of it */ + bool disconnect_conn = FALSE; + + /* Handle the case when the pipe breaks, i.e., the connection + we're using gets cleaned up and we're left with nothing. */ + if(data->state.pipe_broke) { + infof(data, "Pipe broke: handle 0x%p, url = %s\n", + (void *)data, data->state.path); + + if(data->mstate < CURLM_STATE_COMPLETED) { + /* Head back to the CONNECT state */ + multistate(data, CURLM_STATE_CONNECT); + result = CURLM_CALL_MULTI_PERFORM; + data->result = CURLE_OK; + } + + data->state.pipe_broke = FALSE; + data->easy_conn = NULL; + break; + } + + if(!data->easy_conn && + data->mstate > CURLM_STATE_CONNECT && + data->mstate < CURLM_STATE_DONE) { + /* In all these states, the code will blindly access 'data->easy_conn' + so this is precaution that it isn't NULL. And it silences static + analyzers. */ + failf(data, "In state %d with no easy_conn, bail out!\n", data->mstate); + return CURLM_INTERNAL_ERROR; + } + + if(data->easy_conn && data->mstate > CURLM_STATE_CONNECT && + data->mstate < CURLM_STATE_COMPLETED) + /* Make sure we set the connection's current owner */ + data->easy_conn->data = data; + + if(data->easy_conn && + (data->mstate >= CURLM_STATE_CONNECT) && + (data->mstate < CURLM_STATE_COMPLETED)) { + /* we need to wait for the connect state as only then is the start time + stored, but we must not check already completed handles */ + + timeout_ms = Curl_timeleft(data, &now, + (data->mstate <= CURLM_STATE_WAITDO)? + TRUE:FALSE); + + if(timeout_ms < 0) { + /* Handle timed out */ + if(data->mstate == CURLM_STATE_WAITRESOLVE) + failf(data, "Resolving timed out after %ld milliseconds", + Curl_tvdiff(now, data->progress.t_startsingle)); + else if(data->mstate == CURLM_STATE_WAITCONNECT) + failf(data, "Connection timed out after %ld milliseconds", + Curl_tvdiff(now, data->progress.t_startsingle)); + else { + k = &data->req; + if(k->size != -1) { + failf(data, "Operation timed out after %ld milliseconds with %" + CURL_FORMAT_CURL_OFF_T " out of %" + CURL_FORMAT_CURL_OFF_T " bytes received", + Curl_tvdiff(k->now, data->progress.t_startsingle), + k->bytecount, k->size); + } + else { + failf(data, "Operation timed out after %ld milliseconds with %" + CURL_FORMAT_CURL_OFF_T " bytes received", + Curl_tvdiff(now, data->progress.t_startsingle), + k->bytecount); + } + } + + /* Force the connection closed because the server could continue to + send us stuff at any time. (The disconnect_conn logic used below + doesn't work at this point). */ + connclose(data->easy_conn, "Disconnected with pending data"); + data->result = CURLE_OPERATION_TIMEDOUT; + multistate(data, CURLM_STATE_COMPLETED); + break; + } + } + + switch(data->mstate) { + case CURLM_STATE_INIT: + /* init this transfer. */ + data->result=Curl_pretransfer(data); + + if(CURLE_OK == data->result) { + /* after init, go CONNECT */ + multistate(data, CURLM_STATE_CONNECT); + Curl_pgrsTime(data, TIMER_STARTOP); + result = CURLM_CALL_MULTI_PERFORM; + } + break; + + case CURLM_STATE_CONNECT_PEND: + /* We will stay here until there is a connection available. Then + we try again in the CURLM_STATE_CONNECT state. */ + break; + + case CURLM_STATE_CONNECT: + /* Connect. We want to get a connection identifier filled in. */ + Curl_pgrsTime(data, TIMER_STARTSINGLE); + data->result = Curl_connect(data, &data->easy_conn, + &async, &protocol_connect); + if(CURLE_NO_CONNECTION_AVAILABLE == data->result) { + /* There was no connection available. We will go to the pending + state and wait for an available connection. */ + multistate(data, CURLM_STATE_CONNECT_PEND); + + /* add this handle to the list of connect-pending handles */ + if(!Curl_llist_insert_next(multi->pending, multi->pending->tail, data)) + data->result = CURLE_OUT_OF_MEMORY; + else + data->result = CURLE_OK; + break; + } + + if(CURLE_OK == data->result) { + /* Add this handle to the send or pend pipeline */ + data->result = Curl_add_handle_to_pipeline(data, data->easy_conn); + if(CURLE_OK != data->result) + disconnect_conn = TRUE; + else { + if(async) + /* We're now waiting for an asynchronous name lookup */ + multistate(data, CURLM_STATE_WAITRESOLVE); + else { + /* after the connect has been sent off, go WAITCONNECT unless the + protocol connect is already done and we can go directly to + WAITDO or DO! */ + result = CURLM_CALL_MULTI_PERFORM; + + if(protocol_connect) + multistate(data, multi->pipelining_enabled? + CURLM_STATE_WAITDO:CURLM_STATE_DO); + else { +#ifndef CURL_DISABLE_HTTP + if(data->easy_conn->tunnel_state[FIRSTSOCKET] == TUNNEL_CONNECT) + multistate(data, CURLM_STATE_WAITPROXYCONNECT); + else +#endif + multistate(data, CURLM_STATE_WAITCONNECT); + } + } + } + } + break; + + case CURLM_STATE_WAITRESOLVE: + /* awaiting an asynch name resolve to complete */ + { + struct Curl_dns_entry *dns = NULL; + struct connectdata *conn = data->easy_conn; + int stale; + + /* check if we have the name resolved by now */ + if(data->share) + Curl_share_lock(data, CURL_LOCK_DATA_DNS, CURL_LOCK_ACCESS_SINGLE); + + dns = Curl_fetch_addr(conn, conn->host.name, (int)conn->port, &stale); + + if(dns) { + dns->inuse++; /* we use it! */ +#ifdef CURLRES_ASYNCH + conn->async.dns = dns; + conn->async.done = TRUE; +#endif + data->result = CURLRESOLV_RESOLVED; + infof(data, "Hostname was found in DNS cache\n"); + } + if(stale) + infof(data, "Hostname in DNS cache was stale, zapped\n"); + + if(data->share) + Curl_share_unlock(data, CURL_LOCK_DATA_DNS); + + if(!dns) + data->result = Curl_resolver_is_resolved(data->easy_conn, &dns); + + /* Update sockets here, because the socket(s) may have been + closed and the application thus needs to be told, even if it + is likely that the same socket(s) will again be used further + down. If the name has not yet been resolved, it is likely + that new sockets have been opened in an attempt to contact + another resolver. */ + singlesocket(multi, data); + + if(dns) { + /* Perform the next step in the connection phase, and then move on + to the WAITCONNECT state */ + data->result = Curl_async_resolved(data->easy_conn, + &protocol_connect); + + if(CURLE_OK != data->result) + /* if Curl_async_resolved() returns failure, the connection struct + is already freed and gone */ + data->easy_conn = NULL; /* no more connection */ + else { + /* call again please so that we get the next socket setup */ + result = CURLM_CALL_MULTI_PERFORM; + if(protocol_connect) + multistate(data, multi->pipelining_enabled? + CURLM_STATE_WAITDO:CURLM_STATE_DO); + else { +#ifndef CURL_DISABLE_HTTP + if(data->easy_conn->tunnel_state[FIRSTSOCKET] == TUNNEL_CONNECT) + multistate(data, CURLM_STATE_WAITPROXYCONNECT); + else +#endif + multistate(data, CURLM_STATE_WAITCONNECT); + } + } + } + + if(CURLE_OK != data->result) { + /* failure detected */ + disconnect_conn = TRUE; + break; + } + } + break; + +#ifndef CURL_DISABLE_HTTP + case CURLM_STATE_WAITPROXYCONNECT: + /* this is HTTP-specific, but sending CONNECT to a proxy is HTTP... */ + data->result = Curl_http_connect(data->easy_conn, &protocol_connect); + + if(data->easy_conn->bits.proxy_connect_closed) { + /* connect back to proxy again */ + data->result = CURLE_OK; + result = CURLM_CALL_MULTI_PERFORM; + multistate(data, CURLM_STATE_CONNECT); + } + else if(CURLE_OK == data->result) { + if(data->easy_conn->tunnel_state[FIRSTSOCKET] == TUNNEL_COMPLETE) + multistate(data, CURLM_STATE_WAITCONNECT); + } + break; +#endif + + case CURLM_STATE_WAITCONNECT: + /* awaiting a completion of an asynch connect */ + data->result = Curl_is_connected(data->easy_conn, + FIRSTSOCKET, + &connected); + if(connected) { + + if(!data->result) + /* if everything is still fine we do the protocol-specific connect + setup */ + data->result = Curl_protocol_connect(data->easy_conn, + &protocol_connect); + } + + if(data->easy_conn->bits.proxy_connect_closed) { + /* connect back to proxy again since it was closed in a proxy CONNECT + setup */ + data->result = CURLE_OK; + result = CURLM_CALL_MULTI_PERFORM; + multistate(data, CURLM_STATE_CONNECT); + break; + } + else if(CURLE_OK != data->result) { + /* failure detected */ + /* Just break, the cleaning up is handled all in one place */ + disconnect_conn = TRUE; + break; + } + + if(connected) { + if(!protocol_connect) { + /* We have a TCP connection, but 'protocol_connect' may be false + and then we continue to 'STATE_PROTOCONNECT'. If protocol + connect is TRUE, we move on to STATE_DO. + BUT if we are using a proxy we must change to WAITPROXYCONNECT + */ +#ifndef CURL_DISABLE_HTTP + if(data->easy_conn->tunnel_state[FIRSTSOCKET] == TUNNEL_CONNECT) + multistate(data, CURLM_STATE_WAITPROXYCONNECT); + else +#endif + multistate(data, CURLM_STATE_PROTOCONNECT); + + } + else + /* after the connect has completed, go WAITDO or DO */ + multistate(data, multi->pipelining_enabled? + CURLM_STATE_WAITDO:CURLM_STATE_DO); + + result = CURLM_CALL_MULTI_PERFORM; + } + break; + + case CURLM_STATE_PROTOCONNECT: + /* protocol-specific connect phase */ + data->result = Curl_protocol_connecting(data->easy_conn, + &protocol_connect); + if((data->result == CURLE_OK) && protocol_connect) { + /* after the connect has completed, go WAITDO or DO */ + multistate(data, multi->pipelining_enabled? + CURLM_STATE_WAITDO:CURLM_STATE_DO); + result = CURLM_CALL_MULTI_PERFORM; + } + else if(data->result) { + /* failure detected */ + Curl_posttransfer(data); + Curl_done(&data->easy_conn, data->result, TRUE); + disconnect_conn = TRUE; + } + break; + + case CURLM_STATE_WAITDO: + /* Wait for our turn to DO when we're pipelining requests */ +#ifdef DEBUGBUILD + infof(data, "WAITDO: Conn %ld send pipe %zu inuse %s athead %s\n", + data->easy_conn->connection_id, + data->easy_conn->send_pipe->size, + data->easy_conn->writechannel_inuse?"TRUE":"FALSE", + isHandleAtHead(data, + data->easy_conn->send_pipe)?"TRUE":"FALSE"); +#endif + if(!data->easy_conn->writechannel_inuse && + isHandleAtHead(data, + data->easy_conn->send_pipe)) { + /* Grab the channel */ + data->easy_conn->writechannel_inuse = TRUE; + multistate(data, CURLM_STATE_DO); + result = CURLM_CALL_MULTI_PERFORM; + } + break; + + case CURLM_STATE_DO: + if(data->set.connect_only) { + /* keep connection open for application to use the socket */ + connkeep(data->easy_conn, "CONNECT_ONLY"); + multistate(data, CURLM_STATE_DONE); + data->result = CURLE_OK; + result = CURLM_CALL_MULTI_PERFORM; + } + else { + /* Perform the protocol's DO action */ + data->result = Curl_do(&data->easy_conn, &dophase_done); + + /* When Curl_do() returns failure, data->easy_conn might be NULL! */ + + if(CURLE_OK == data->result) { + if(!dophase_done) { + /* some steps needed for wildcard matching */ + if(data->set.wildcardmatch) { + struct WildcardData *wc = &data->wildcard; + if(wc->state == CURLWC_DONE || wc->state == CURLWC_SKIP) { + /* skip some states if it is important */ + Curl_done(&data->easy_conn, CURLE_OK, FALSE); + multistate(data, CURLM_STATE_DONE); + result = CURLM_CALL_MULTI_PERFORM; + break; + } + } + /* DO was not completed in one function call, we must continue + DOING... */ + multistate(data, CURLM_STATE_DOING); + result = CURLM_OK; + } + + /* after DO, go DO_DONE... or DO_MORE */ + else if(data->easy_conn->bits.do_more) { + /* we're supposed to do more, but we need to sit down, relax + and wait a little while first */ + multistate(data, CURLM_STATE_DO_MORE); + result = CURLM_OK; + } + else { + /* we're done with the DO, now DO_DONE */ + multistate(data, CURLM_STATE_DO_DONE); + result = CURLM_CALL_MULTI_PERFORM; + } + } + else if((CURLE_SEND_ERROR == data->result) && + data->easy_conn->bits.reuse) { + /* + * In this situation, a connection that we were trying to use + * may have unexpectedly died. If possible, send the connection + * back to the CONNECT phase so we can try again. + */ + char *newurl = NULL; + followtype follow=FOLLOW_NONE; + CURLcode drc; + bool retry = FALSE; + + drc = Curl_retry_request(data->easy_conn, &newurl); + if(drc) { + /* a failure here pretty much implies an out of memory */ + data->result = drc; + disconnect_conn = TRUE; + } + else + retry = (newurl)?TRUE:FALSE; + + Curl_posttransfer(data); + drc = Curl_done(&data->easy_conn, data->result, FALSE); + + /* When set to retry the connection, we must to go back to + * the CONNECT state */ + if(retry) { + if((drc == CURLE_OK) || (drc == CURLE_SEND_ERROR)) { + follow = FOLLOW_RETRY; + drc = Curl_follow(data, newurl, follow); + if(drc == CURLE_OK) { + multistate(data, CURLM_STATE_CONNECT); + result = CURLM_CALL_MULTI_PERFORM; + data->result = CURLE_OK; + } + else { + /* Follow failed */ + data->result = drc; + free(newurl); + } + } + else { + /* done didn't return OK or SEND_ERROR */ + data->result = drc; + free(newurl); + } + } + else { + /* Have error handler disconnect conn if we can't retry */ + disconnect_conn = TRUE; + } + } + else { + /* failure detected */ + Curl_posttransfer(data); + if(data->easy_conn) + Curl_done(&data->easy_conn, data->result, FALSE); + disconnect_conn = TRUE; + } + } + break; + + case CURLM_STATE_DOING: + /* we continue DOING until the DO phase is complete */ + data->result = Curl_protocol_doing(data->easy_conn, + &dophase_done); + if(CURLE_OK == data->result) { + if(dophase_done) { + /* after DO, go DO_DONE or DO_MORE */ + multistate(data, data->easy_conn->bits.do_more? + CURLM_STATE_DO_MORE: + CURLM_STATE_DO_DONE); + result = CURLM_CALL_MULTI_PERFORM; + } /* dophase_done */ + } + else { + /* failure detected */ + Curl_posttransfer(data); + Curl_done(&data->easy_conn, data->result, FALSE); + disconnect_conn = TRUE; + } + break; + + case CURLM_STATE_DO_MORE: + /* + * When we are connected, DO MORE and then go DO_DONE + */ + data->result = Curl_do_more(data->easy_conn, &control); + + /* No need to remove this handle from the send pipeline here since that + is done in Curl_done() */ + if(CURLE_OK == data->result) { + if(control) { + /* if positive, advance to DO_DONE + if negative, go back to DOING */ + multistate(data, control==1? + CURLM_STATE_DO_DONE: + CURLM_STATE_DOING); + result = CURLM_CALL_MULTI_PERFORM; + } + else + /* stay in DO_MORE */ + result = CURLM_OK; + } + else { + /* failure detected */ + Curl_posttransfer(data); + Curl_done(&data->easy_conn, data->result, FALSE); + disconnect_conn = TRUE; + } + break; + + case CURLM_STATE_DO_DONE: + /* Move ourselves from the send to recv pipeline */ + Curl_move_handle_from_send_to_recv_pipe(data, data->easy_conn); + /* Check if we can move pending requests to send pipe */ + Curl_multi_process_pending_handles(multi); + + /* Only perform the transfer if there's a good socket to work with. + Having both BAD is a signal to skip immediately to DONE */ + if((data->easy_conn->sockfd != CURL_SOCKET_BAD) || + (data->easy_conn->writesockfd != CURL_SOCKET_BAD)) + multistate(data, CURLM_STATE_WAITPERFORM); + else + multistate(data, CURLM_STATE_DONE); + result = CURLM_CALL_MULTI_PERFORM; + break; + + case CURLM_STATE_WAITPERFORM: + /* Wait for our turn to PERFORM */ + if(!data->easy_conn->readchannel_inuse && + isHandleAtHead(data, + data->easy_conn->recv_pipe)) { + /* Grab the channel */ + data->easy_conn->readchannel_inuse = TRUE; + multistate(data, CURLM_STATE_PERFORM); + result = CURLM_CALL_MULTI_PERFORM; + } +#ifdef DEBUGBUILD + else { + infof(data, "WAITPERFORM: Conn %ld recv pipe %zu inuse %s athead %s\n", + data->easy_conn->connection_id, + data->easy_conn->recv_pipe->size, + data->easy_conn->readchannel_inuse?"TRUE":"FALSE", + isHandleAtHead(data, + data->easy_conn->recv_pipe)?"TRUE":"FALSE"); + } +#endif + break; + + case CURLM_STATE_TOOFAST: /* limit-rate exceeded in either direction */ + /* if both rates are within spec, resume transfer */ + if(Curl_pgrsUpdate(data->easy_conn)) + data->result = CURLE_ABORTED_BY_CALLBACK; + else + data->result = Curl_speedcheck(data, now); + + if(( (data->set.max_send_speed == 0) || + (data->progress.ulspeed < data->set.max_send_speed )) && + ( (data->set.max_recv_speed == 0) || + (data->progress.dlspeed < data->set.max_recv_speed))) + multistate(data, CURLM_STATE_PERFORM); + break; + + case CURLM_STATE_PERFORM: + { + char *newurl = NULL; + bool retry = FALSE; + + /* check if over send speed */ + if((data->set.max_send_speed > 0) && + (data->progress.ulspeed > data->set.max_send_speed)) { + int buffersize; + + multistate(data, CURLM_STATE_TOOFAST); + + /* calculate upload rate-limitation timeout. */ + buffersize = (int)(data->set.buffer_size ? + data->set.buffer_size : BUFSIZE); + timeout_ms = Curl_sleep_time(data->set.max_send_speed, + data->progress.ulspeed, buffersize); + Curl_expire_latest(data, timeout_ms); + break; + } + + /* check if over recv speed */ + if((data->set.max_recv_speed > 0) && + (data->progress.dlspeed > data->set.max_recv_speed)) { + int buffersize; + + multistate(data, CURLM_STATE_TOOFAST); + + /* Calculate download rate-limitation timeout. */ + buffersize = (int)(data->set.buffer_size ? + data->set.buffer_size : BUFSIZE); + timeout_ms = Curl_sleep_time(data->set.max_recv_speed, + data->progress.dlspeed, buffersize); + Curl_expire_latest(data, timeout_ms); + break; + } + + /* read/write data if it is ready to do so */ + data->result = Curl_readwrite(data->easy_conn, &done); + + k = &data->req; + + if(!(k->keepon & KEEP_RECV)) { + /* We're done receiving */ + data->easy_conn->readchannel_inuse = FALSE; + } + + if(!(k->keepon & KEEP_SEND)) { + /* We're done sending */ + data->easy_conn->writechannel_inuse = FALSE; + } + + if(done || (data->result == CURLE_RECV_ERROR)) { + /* If CURLE_RECV_ERROR happens early enough, we assume it was a race + * condition and the server closed the re-used connection exactly when + * we wanted to use it, so figure out if that is indeed the case. + */ + CURLcode ret = Curl_retry_request(data->easy_conn, &newurl); + if(!ret) + retry = (newurl)?TRUE:FALSE; + + if(retry) { + /* if we are to retry, set the result to OK and consider the + request as done */ + data->result = CURLE_OK; + done = TRUE; + } + } + + if(data->result) { + /* + * The transfer phase returned error, we mark the connection to get + * closed to prevent being re-used. This is because we can't possibly + * know if the connection is in a good shape or not now. Unless it is + * a protocol which uses two "channels" like FTP, as then the error + * happened in the data connection. + */ + + if(!(data->easy_conn->handler->flags & PROTOPT_DUAL)) + connclose(data->easy_conn, "Transfer returned error"); + + Curl_posttransfer(data); + Curl_done(&data->easy_conn, data->result, FALSE); + } + else if(done) { + followtype follow=FOLLOW_NONE; + + /* call this even if the readwrite function returned error */ + Curl_posttransfer(data); + + /* we're no longer receiving */ + Curl_removeHandleFromPipeline(data, data->easy_conn->recv_pipe); + + /* expire the new receiving pipeline head */ + if(data->easy_conn->recv_pipe->head) + Curl_expire_latest(data->easy_conn->recv_pipe->head->ptr, 1); + + /* Check if we can move pending requests to send pipe */ + Curl_multi_process_pending_handles(multi); + + /* When we follow redirects or is set to retry the connection, we must + to go back to the CONNECT state */ + if(data->req.newurl || retry) { + if(!retry) { + /* if the URL is a follow-location and not just a retried request + then figure out the URL here */ + newurl = data->req.newurl; + data->req.newurl = NULL; + follow = FOLLOW_REDIR; + } + else + follow = FOLLOW_RETRY; + data->result = Curl_done(&data->easy_conn, CURLE_OK, FALSE); + if(CURLE_OK == data->result) { + data->result = Curl_follow(data, newurl, follow); + if(CURLE_OK == data->result) { + multistate(data, CURLM_STATE_CONNECT); + result = CURLM_CALL_MULTI_PERFORM; + newurl = NULL; /* handed over the memory ownership to + Curl_follow(), make sure we don't free() it + here */ + } + } + } + else { + /* after the transfer is done, go DONE */ + + /* but first check to see if we got a location info even though we're + not following redirects */ + if(data->req.location) { + if(newurl) + free(newurl); + newurl = data->req.location; + data->req.location = NULL; + data->result = Curl_follow(data, newurl, FOLLOW_FAKE); + if(CURLE_OK == data->result) + newurl = NULL; /* allocation was handed over Curl_follow() */ + else + disconnect_conn = TRUE; + } + + multistate(data, CURLM_STATE_DONE); + result = CURLM_CALL_MULTI_PERFORM; + } + } + + if(newurl) + free(newurl); + break; + } + + case CURLM_STATE_DONE: + /* this state is highly transient, so run another loop after this */ + result = CURLM_CALL_MULTI_PERFORM; + + if(data->easy_conn) { + CURLcode res; + + /* Remove ourselves from the receive pipeline, if we are there. */ + Curl_removeHandleFromPipeline(data, data->easy_conn->recv_pipe); + /* Check if we can move pending requests to send pipe */ + Curl_multi_process_pending_handles(multi); + + /* post-transfer command */ + res = Curl_done(&data->easy_conn, data->result, FALSE); + + /* allow a previously set error code take precedence */ + if(!data->result) + data->result = res; + + /* + * If there are other handles on the pipeline, Curl_done won't set + * easy_conn to NULL. In such a case, curl_multi_remove_handle() can + * access free'd data, if the connection is free'd and the handle + * removed before we perform the processing in CURLM_STATE_COMPLETED + */ + if(data->easy_conn) + data->easy_conn = NULL; + } + + if(data->set.wildcardmatch) { + if(data->wildcard.state != CURLWC_DONE) { + /* if a wildcard is set and we are not ending -> lets start again + with CURLM_STATE_INIT */ + multistate(data, CURLM_STATE_INIT); + break; + } + } + + /* after we have DONE what we're supposed to do, go COMPLETED, and + it doesn't matter what the Curl_done() returned! */ + multistate(data, CURLM_STATE_COMPLETED); + break; + + case CURLM_STATE_COMPLETED: + /* this is a completed transfer, it is likely to still be connected */ + + /* This node should be delinked from the list now and we should post + an information message that we are complete. */ + + /* Important: reset the conn pointer so that we don't point to memory + that could be freed anytime */ + data->easy_conn = NULL; + + Curl_expire(data, 0); /* stop all timers */ + break; + + case CURLM_STATE_MSGSENT: + return CURLM_OK; /* do nothing */ + + default: + return CURLM_INTERNAL_ERROR; + } + + if(data->mstate < CURLM_STATE_COMPLETED) { + if(CURLE_OK != data->result) { + /* + * If an error was returned, and we aren't in completed state now, + * then we go to completed and consider this transfer aborted. + */ + + /* NOTE: no attempt to disconnect connections must be made + in the case blocks above - cleanup happens only here */ + + data->state.pipe_broke = FALSE; + + if(data->easy_conn) { + /* if this has a connection, unsubscribe from the pipelines */ + data->easy_conn->writechannel_inuse = FALSE; + data->easy_conn->readchannel_inuse = FALSE; + Curl_removeHandleFromPipeline(data, + data->easy_conn->send_pipe); + Curl_removeHandleFromPipeline(data, + data->easy_conn->recv_pipe); + /* Check if we can move pending requests to send pipe */ + Curl_multi_process_pending_handles(multi); + + if(disconnect_conn) { + /* disconnect properly */ + Curl_disconnect(data->easy_conn, /* dead_connection */ FALSE); + + /* This is where we make sure that the easy_conn pointer is reset. + We don't have to do this in every case block above where a + failure is detected */ + data->easy_conn = NULL; + } + } + else if(data->mstate == CURLM_STATE_CONNECT) { + /* Curl_connect() failed */ + (void)Curl_posttransfer(data); + } + + multistate(data, CURLM_STATE_COMPLETED); + } + /* if there's still a connection to use, call the progress function */ + else if(data->easy_conn && Curl_pgrsUpdate(data->easy_conn)) { + /* aborted due to progress callback return code must close the + connection */ + data->result = CURLE_ABORTED_BY_CALLBACK; + connclose(data->easy_conn, "Aborted by callback"); + + /* if not yet in DONE state, go there, otherwise COMPLETED */ + multistate(data, (data->mstate < CURLM_STATE_DONE)? + CURLM_STATE_DONE: CURLM_STATE_COMPLETED); + result = CURLM_CALL_MULTI_PERFORM; + } + } + } WHILE_FALSE; /* just to break out from! */ + + if(CURLM_STATE_COMPLETED == data->mstate) { + /* now fill in the Curl_message with this info */ + msg = &data->msg; + + msg->extmsg.msg = CURLMSG_DONE; + msg->extmsg.easy_handle = data; + msg->extmsg.data.result = data->result; + + result = multi_addmsg(multi, msg); + + multistate(data, CURLM_STATE_MSGSENT); + } + + return result; +} + + +CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles) +{ + struct Curl_multi *multi=(struct Curl_multi *)multi_handle; + struct SessionHandle *data; + CURLMcode returncode=CURLM_OK; + struct Curl_tree *t; + struct timeval now = Curl_tvnow(); + + if(!GOOD_MULTI_HANDLE(multi)) + return CURLM_BAD_HANDLE; + + data=multi->easyp; + while(data) { + CURLMcode result; + struct WildcardData *wc = &data->wildcard; + SIGPIPE_VARIABLE(pipe_st); + + if(data->set.wildcardmatch) { + if(!wc->filelist) { + CURLcode ret = Curl_wildcard_init(wc); /* init wildcard structures */ + if(ret) + return CURLM_OUT_OF_MEMORY; + } + } + + sigpipe_ignore(data, &pipe_st); + do + result = multi_runsingle(multi, now, data); + while(CURLM_CALL_MULTI_PERFORM == result); + sigpipe_restore(&pipe_st); + + if(data->set.wildcardmatch) { + /* destruct wildcard structures if it is needed */ + if(wc->state == CURLWC_DONE || result) + Curl_wildcard_dtor(wc); + } + + if(result) + returncode = result; + + data = data->next; /* operate on next handle */ + } + + /* + * Simply remove all expired timers from the splay since handles are dealt + * with unconditionally by this function and curl_multi_timeout() requires + * that already passed/handled expire times are removed from the splay. + * + * It is important that the 'now' value is set at the entry of this function + * and not for the current time as it may have ticked a little while since + * then and then we risk this loop to remove timers that actually have not + * been handled! + */ + do { + multi->timetree = Curl_splaygetbest(now, multi->timetree, &t); + if(t) + /* the removed may have another timeout in queue */ + (void)add_next_timeout(now, multi, t->payload); + + } while(t); + + *running_handles = multi->num_alive; + + if(CURLM_OK >= returncode) + update_timer(multi); + + return returncode; +} + +static void close_all_connections(struct Curl_multi *multi) +{ + struct connectdata *conn; + + conn = Curl_conncache_find_first_connection(multi->conn_cache); + while(conn) { + SIGPIPE_VARIABLE(pipe_st); + conn->data = multi->closure_handle; + + sigpipe_ignore(conn->data, &pipe_st); + /* This will remove the connection from the cache */ + (void)Curl_disconnect(conn, FALSE); + sigpipe_restore(&pipe_st); + + conn = Curl_conncache_find_first_connection(multi->conn_cache); + } +} + +CURLMcode curl_multi_cleanup(CURLM *multi_handle) +{ + struct Curl_multi *multi=(struct Curl_multi *)multi_handle; + struct SessionHandle *data; + struct SessionHandle *nextdata; + + if(GOOD_MULTI_HANDLE(multi)) { + bool restore_pipe = FALSE; + SIGPIPE_VARIABLE(pipe_st); + + multi->type = 0; /* not good anymore */ + + /* Close all the connections in the connection cache */ + close_all_connections(multi); + + if(multi->closure_handle) { + sigpipe_ignore(multi->closure_handle, &pipe_st); + restore_pipe = TRUE; + + multi->closure_handle->dns.hostcache = multi->hostcache; + Curl_hostcache_clean(multi->closure_handle, + multi->closure_handle->dns.hostcache); + + Curl_close(multi->closure_handle); + } + + Curl_hash_destroy(multi->sockhash); + Curl_conncache_destroy(multi->conn_cache); + Curl_llist_destroy(multi->msglist, NULL); + Curl_llist_destroy(multi->pending, NULL); + + /* remove all easy handles */ + data = multi->easyp; + while(data) { + nextdata=data->next; + if(data->dns.hostcachetype == HCACHE_MULTI) { + /* clear out the usage of the shared DNS cache */ + Curl_hostcache_clean(data, data->dns.hostcache); + data->dns.hostcache = NULL; + data->dns.hostcachetype = HCACHE_NONE; + } + + /* Clear the pointer to the connection cache */ + data->state.conn_cache = NULL; + data->multi = NULL; /* clear the association */ + + data = nextdata; + } + + Curl_hash_destroy(multi->hostcache); + + /* Free the blacklists by setting them to NULL */ + Curl_pipeline_set_site_blacklist(NULL, &multi->pipelining_site_bl); + Curl_pipeline_set_server_blacklist(NULL, &multi->pipelining_server_bl); + + free(multi); + if(restore_pipe) + sigpipe_restore(&pipe_st); + + return CURLM_OK; + } + else + return CURLM_BAD_HANDLE; +} + +/* + * curl_multi_info_read() + * + * This function is the primary way for a multi/multi_socket application to + * figure out if a transfer has ended. We MUST make this function as fast as + * possible as it will be polled frequently and we MUST NOT scan any lists in + * here to figure out things. We must scale fine to thousands of handles and + * beyond. The current design is fully O(1). + */ + +CURLMsg *curl_multi_info_read(CURLM *multi_handle, int *msgs_in_queue) +{ + struct Curl_multi *multi=(struct Curl_multi *)multi_handle; + struct Curl_message *msg; + + *msgs_in_queue = 0; /* default to none */ + + if(GOOD_MULTI_HANDLE(multi) && Curl_llist_count(multi->msglist)) { + /* there is one or more messages in the list */ + struct curl_llist_element *e; + + /* extract the head of the list to return */ + e = multi->msglist->head; + + msg = e->ptr; + + /* remove the extracted entry */ + Curl_llist_remove(multi->msglist, e, NULL); + + *msgs_in_queue = curlx_uztosi(Curl_llist_count(multi->msglist)); + + return &msg->extmsg; + } + else + return NULL; +} + +/* + * singlesocket() checks what sockets we deal with and their "action state" + * and if we have a different state in any of those sockets from last time we + * call the callback accordingly. + */ +static void singlesocket(struct Curl_multi *multi, + struct SessionHandle *data) +{ + curl_socket_t socks[MAX_SOCKSPEREASYHANDLE]; + int i; + struct Curl_sh_entry *entry; + curl_socket_t s; + int num; + unsigned int curraction; + bool remove_sock_from_hash; + + for(i=0; i< MAX_SOCKSPEREASYHANDLE; i++) + socks[i] = CURL_SOCKET_BAD; + + /* Fill in the 'current' struct with the state as it is now: what sockets to + supervise and for what actions */ + curraction = multi_getsock(data, socks, MAX_SOCKSPEREASYHANDLE); + + /* We have 0 .. N sockets already and we get to know about the 0 .. M + sockets we should have from now on. Detect the differences, remove no + longer supervised ones and add new ones */ + + /* walk over the sockets we got right now */ + for(i=0; (i< MAX_SOCKSPEREASYHANDLE) && + (curraction & (GETSOCK_READSOCK(i) | GETSOCK_WRITESOCK(i))); + i++) { + int action = CURL_POLL_NONE; + + s = socks[i]; + + /* get it from the hash */ + entry = Curl_hash_pick(multi->sockhash, (char *)&s, sizeof(s)); + + if(curraction & GETSOCK_READSOCK(i)) + action |= CURL_POLL_IN; + if(curraction & GETSOCK_WRITESOCK(i)) + action |= CURL_POLL_OUT; + + if(entry) { + /* yeps, already present so check if it has the same action set */ + if(entry->action == action) + /* same, continue */ + continue; + } + else { + /* this is a socket we didn't have before, add it! */ + entry = sh_addentry(multi->sockhash, s, data); + if(!entry) + /* fatal */ + return; + } + + /* we know (entry != NULL) at this point, see the logic above */ + if(multi->socket_cb) + multi->socket_cb(data, + s, + action, + multi->socket_userp, + entry->socketp); + + entry->action = action; /* store the current action state */ + } + + num = i; /* number of sockets */ + + /* when we've walked over all the sockets we should have right now, we must + make sure to detect sockets that are removed */ + for(i=0; i< data->numsocks; i++) { + int j; + s = data->sockets[i]; + for(j=0; j<num; j++) { + if(s == socks[j]) { + /* this is still supervised */ + s = CURL_SOCKET_BAD; + break; + } + } + if(s != CURL_SOCKET_BAD) { + + /* this socket has been removed. Tell the app to remove it */ + remove_sock_from_hash = TRUE; + + entry = Curl_hash_pick(multi->sockhash, (char *)&s, sizeof(s)); + if(entry) { + /* check if the socket to be removed serves a connection which has + other easy-s in a pipeline. In this case the socket should not be + removed. */ + struct connectdata *easy_conn = data->easy_conn; + if(easy_conn) { + if(easy_conn->recv_pipe && easy_conn->recv_pipe->size > 1) { + /* the handle should not be removed from the pipe yet */ + remove_sock_from_hash = FALSE; + + /* Update the sockhash entry to instead point to the next in line + for the recv_pipe, or the first (in case this particular easy + isn't already) */ + if(entry->easy == data) { + if(isHandleAtHead(data, easy_conn->recv_pipe)) + entry->easy = easy_conn->recv_pipe->head->next->ptr; + else + entry->easy = easy_conn->recv_pipe->head->ptr; + } + } + if(easy_conn->send_pipe && easy_conn->send_pipe->size > 1) { + /* the handle should not be removed from the pipe yet */ + remove_sock_from_hash = FALSE; + + /* Update the sockhash entry to instead point to the next in line + for the send_pipe, or the first (in case this particular easy + isn't already) */ + if(entry->easy == data) { + if(isHandleAtHead(data, easy_conn->send_pipe)) + entry->easy = easy_conn->send_pipe->head->next->ptr; + else + entry->easy = easy_conn->send_pipe->head->ptr; + } + } + /* Don't worry about overwriting recv_pipe head with send_pipe_head, + when action will be asked on the socket (see multi_socket()), the + head of the correct pipe will be taken according to the + action. */ + } + } + else + /* just a precaution, this socket really SHOULD be in the hash already + but in case it isn't, we don't have to tell the app to remove it + either since it never got to know about it */ + remove_sock_from_hash = FALSE; + + if(remove_sock_from_hash) { + /* in this case 'entry' is always non-NULL */ + if(multi->socket_cb) + multi->socket_cb(data, + s, + CURL_POLL_REMOVE, + multi->socket_userp, + entry->socketp); + sh_delentry(multi->sockhash, s); + } + + } + } + + memcpy(data->sockets, socks, num*sizeof(curl_socket_t)); + data->numsocks = num; +} + +/* + * Curl_multi_closed() + * + * Used by the connect code to tell the multi_socket code that one of the + * sockets we were using have just been closed. This function will then + * remove it from the sockethash for this handle to make the multi_socket API + * behave properly, especially for the case when libcurl will create another + * socket again and it gets the same file descriptor number. + */ + +void Curl_multi_closed(struct connectdata *conn, curl_socket_t s) +{ + struct Curl_multi *multi = conn->data->multi; + if(multi) { + /* this is set if this connection is part of a handle that is added to + a multi handle, and only then this is necessary */ + struct Curl_sh_entry *entry = + Curl_hash_pick(multi->sockhash, (char *)&s, sizeof(s)); + + if(entry) { + if(multi->socket_cb) + multi->socket_cb(conn->data, s, CURL_POLL_REMOVE, + multi->socket_userp, + entry->socketp); + + /* now remove it from the socket hash */ + sh_delentry(multi->sockhash, s); + } + } +} + + + +/* + * add_next_timeout() + * + * Each SessionHandle has a list of timeouts. The add_next_timeout() is called + * when it has just been removed from the splay tree because the timeout has + * expired. This function is then to advance in the list to pick the next + * timeout to use (skip the already expired ones) and add this node back to + * the splay tree again. + * + * The splay tree only has each sessionhandle as a single node and the nearest + * timeout is used to sort it on. + */ +static CURLMcode add_next_timeout(struct timeval now, + struct Curl_multi *multi, + struct SessionHandle *d) +{ + struct timeval *tv = &d->state.expiretime; + struct curl_llist *list = d->state.timeoutlist; + struct curl_llist_element *e; + + /* move over the timeout list for this specific handle and remove all + timeouts that are now passed tense and store the next pending + timeout in *tv */ + for(e = list->head; e; ) { + struct curl_llist_element *n = e->next; + long diff = curlx_tvdiff(*(struct timeval *)e->ptr, now); + if(diff <= 0) + /* remove outdated entry */ + Curl_llist_remove(list, e, NULL); + else + /* the list is sorted so get out on the first mismatch */ + break; + e = n; + } + e = list->head; + if(!e) { + /* clear the expire times within the handles that we remove from the + splay tree */ + tv->tv_sec = 0; + tv->tv_usec = 0; + } + else { + /* copy the first entry to 'tv' */ + memcpy(tv, e->ptr, sizeof(*tv)); + + /* remove first entry from list */ + Curl_llist_remove(list, e, NULL); + + /* insert this node again into the splay */ + multi->timetree = Curl_splayinsert(*tv, multi->timetree, + &d->state.timenode); + } + return CURLM_OK; +} + +static CURLMcode multi_socket(struct Curl_multi *multi, + bool checkall, + curl_socket_t s, + int ev_bitmask, + int *running_handles) +{ + CURLMcode result = CURLM_OK; + struct SessionHandle *data = NULL; + struct Curl_tree *t; + struct timeval now = Curl_tvnow(); + + if(checkall) { + /* *perform() deals with running_handles on its own */ + result = curl_multi_perform(multi, running_handles); + + /* walk through each easy handle and do the socket state change magic + and callbacks */ + if(result != CURLM_BAD_HANDLE) { + data=multi->easyp; + while(data) { + singlesocket(multi, data); + data = data->next; + } + } + + /* or should we fall-through and do the timer-based stuff? */ + return result; + } + else if(s != CURL_SOCKET_TIMEOUT) { + + struct Curl_sh_entry *entry = + Curl_hash_pick(multi->sockhash, (char *)&s, sizeof(s)); + + if(!entry) + /* Unmatched socket, we can't act on it but we ignore this fact. In + real-world tests it has been proved that libevent can in fact give + the application actions even though the socket was just previously + asked to get removed, so thus we better survive stray socket actions + and just move on. */ + ; + else { + SIGPIPE_VARIABLE(pipe_st); + + data = entry->easy; + + if(data->magic != CURLEASY_MAGIC_NUMBER) + /* bad bad bad bad bad bad bad */ + return CURLM_INTERNAL_ERROR; + + /* If the pipeline is enabled, take the handle which is in the head of + the pipeline. If we should write into the socket, take the send_pipe + head. If we should read from the socket, take the recv_pipe head. */ + if(data->easy_conn) { + if((ev_bitmask & CURL_POLL_OUT) && + data->easy_conn->send_pipe && + data->easy_conn->send_pipe->head) + data = data->easy_conn->send_pipe->head->ptr; + else if((ev_bitmask & CURL_POLL_IN) && + data->easy_conn->recv_pipe && + data->easy_conn->recv_pipe->head) + data = data->easy_conn->recv_pipe->head->ptr; + } + + if(data->easy_conn && + !(data->easy_conn->handler->flags & PROTOPT_DIRLOCK)) + /* set socket event bitmask if they're not locked */ + data->easy_conn->cselect_bits = ev_bitmask; + + sigpipe_ignore(data, &pipe_st); + do + result = multi_runsingle(multi, now, data); + while(CURLM_CALL_MULTI_PERFORM == result); + sigpipe_restore(&pipe_st); + + if(data->easy_conn && + !(data->easy_conn->handler->flags & PROTOPT_DIRLOCK)) + /* clear the bitmask only if not locked */ + data->easy_conn->cselect_bits = 0; + + if(CURLM_OK >= result) + /* get the socket(s) and check if the state has been changed since + last */ + singlesocket(multi, data); + + /* Now we fall-through and do the timer-based stuff, since we don't want + to force the user to have to deal with timeouts as long as at least + one connection in fact has traffic. */ + + data = NULL; /* set data to NULL again to avoid calling + multi_runsingle() in case there's no need to */ + now = Curl_tvnow(); /* get a newer time since the multi_runsingle() loop + may have taken some time */ + } + } + else { + /* Asked to run due to time-out. Clear the 'lastcall' variable to force + update_timer() to trigger a callback to the app again even if the same + timeout is still the one to run after this call. That handles the case + when the application asks libcurl to run the timeout prematurely. */ + memset(&multi->timer_lastcall, 0, sizeof(multi->timer_lastcall)); + } + + /* + * The loop following here will go on as long as there are expire-times left + * to process in the splay and 'data' will be re-assigned for every expired + * handle we deal with. + */ + do { + /* the first loop lap 'data' can be NULL */ + if(data) { + SIGPIPE_VARIABLE(pipe_st); + + sigpipe_ignore(data, &pipe_st); + do + result = multi_runsingle(multi, now, data); + while(CURLM_CALL_MULTI_PERFORM == result); + sigpipe_restore(&pipe_st); + + if(CURLM_OK >= result) + /* get the socket(s) and check if the state has been changed since + last */ + singlesocket(multi, data); + } + + /* Check if there's one (more) expired timer to deal with! This function + extracts a matching node if there is one */ + + multi->timetree = Curl_splaygetbest(now, multi->timetree, &t); + if(t) { + data = t->payload; /* assign this for next loop */ + (void)add_next_timeout(now, multi, t->payload); + } + + } while(t); + + *running_handles = multi->num_alive; + return result; +} + +#undef curl_multi_setopt +CURLMcode curl_multi_setopt(CURLM *multi_handle, + CURLMoption option, ...) +{ + struct Curl_multi *multi=(struct Curl_multi *)multi_handle; + CURLMcode res = CURLM_OK; + va_list param; + + if(!GOOD_MULTI_HANDLE(multi)) + return CURLM_BAD_HANDLE; + + va_start(param, option); + + switch(option) { + case CURLMOPT_SOCKETFUNCTION: + multi->socket_cb = va_arg(param, curl_socket_callback); + break; + case CURLMOPT_SOCKETDATA: + multi->socket_userp = va_arg(param, void *); + break; + case CURLMOPT_PIPELINING: + multi->pipelining_enabled = (0 != va_arg(param, long)) ? TRUE : FALSE; + break; + case CURLMOPT_TIMERFUNCTION: + multi->timer_cb = va_arg(param, curl_multi_timer_callback); + break; + case CURLMOPT_TIMERDATA: + multi->timer_userp = va_arg(param, void *); + break; + case CURLMOPT_MAXCONNECTS: + multi->maxconnects = va_arg(param, long); + break; + case CURLMOPT_MAX_HOST_CONNECTIONS: + multi->max_host_connections = va_arg(param, long); + break; + case CURLMOPT_MAX_PIPELINE_LENGTH: + multi->max_pipeline_length = va_arg(param, long); + break; + case CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE: + multi->content_length_penalty_size = va_arg(param, long); + break; + case CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE: + multi->chunk_length_penalty_size = va_arg(param, long); + break; + case CURLMOPT_PIPELINING_SITE_BL: + res = Curl_pipeline_set_site_blacklist(va_arg(param, char **), + &multi->pipelining_site_bl); + break; + case CURLMOPT_PIPELINING_SERVER_BL: + res = Curl_pipeline_set_server_blacklist(va_arg(param, char **), + &multi->pipelining_server_bl); + break; + case CURLMOPT_MAX_TOTAL_CONNECTIONS: + multi->max_total_connections = va_arg(param, long); + break; + default: + res = CURLM_UNKNOWN_OPTION; + break; + } + va_end(param); + return res; +} + +/* we define curl_multi_socket() in the public multi.h header */ +#undef curl_multi_socket + +CURLMcode curl_multi_socket(CURLM *multi_handle, curl_socket_t s, + int *running_handles) +{ + CURLMcode result = multi_socket((struct Curl_multi *)multi_handle, FALSE, s, + 0, running_handles); + if(CURLM_OK >= result) + update_timer((struct Curl_multi *)multi_handle); + return result; +} + +CURLMcode curl_multi_socket_action(CURLM *multi_handle, curl_socket_t s, + int ev_bitmask, int *running_handles) +{ + CURLMcode result = multi_socket((struct Curl_multi *)multi_handle, FALSE, s, + ev_bitmask, running_handles); + if(CURLM_OK >= result) + update_timer((struct Curl_multi *)multi_handle); + return result; +} + +CURLMcode curl_multi_socket_all(CURLM *multi_handle, int *running_handles) + +{ + CURLMcode result = multi_socket((struct Curl_multi *)multi_handle, + TRUE, CURL_SOCKET_BAD, 0, running_handles); + if(CURLM_OK >= result) + update_timer((struct Curl_multi *)multi_handle); + return result; +} + +static CURLMcode multi_timeout(struct Curl_multi *multi, + long *timeout_ms) +{ + static struct timeval tv_zero = {0,0}; + + if(multi->timetree) { + /* we have a tree of expire times */ + struct timeval now = Curl_tvnow(); + + /* splay the lowest to the bottom */ + multi->timetree = Curl_splay(tv_zero, multi->timetree); + + if(Curl_splaycomparekeys(multi->timetree->key, now) > 0) { + /* some time left before expiration */ + *timeout_ms = curlx_tvdiff(multi->timetree->key, now); + if(!*timeout_ms) + /* + * Since we only provide millisecond resolution on the returned value + * and the diff might be less than one millisecond here, we don't + * return zero as that may cause short bursts of busyloops on fast + * processors while the diff is still present but less than one + * millisecond! instead we return 1 until the time is ripe. + */ + *timeout_ms=1; + } + else + /* 0 means immediately */ + *timeout_ms = 0; + } + else + *timeout_ms = -1; + + return CURLM_OK; +} + +CURLMcode curl_multi_timeout(CURLM *multi_handle, + long *timeout_ms) +{ + struct Curl_multi *multi=(struct Curl_multi *)multi_handle; + + /* First, make some basic checks that the CURLM handle is a good handle */ + if(!GOOD_MULTI_HANDLE(multi)) + return CURLM_BAD_HANDLE; + + return multi_timeout(multi, timeout_ms); +} + +/* + * Tell the application it should update its timers, if it subscribes to the + * update timer callback. + */ +static int update_timer(struct Curl_multi *multi) +{ + long timeout_ms; + + if(!multi->timer_cb) + return 0; + if(multi_timeout(multi, &timeout_ms)) { + return -1; + } + if(timeout_ms < 0) { + static const struct timeval none={0,0}; + if(Curl_splaycomparekeys(none, multi->timer_lastcall)) { + multi->timer_lastcall = none; + /* there's no timeout now but there was one previously, tell the app to + disable it */ + return multi->timer_cb((CURLM*)multi, -1, multi->timer_userp); + } + return 0; + } + + /* When multi_timeout() is done, multi->timetree points to the node with the + * timeout we got the (relative) time-out time for. We can thus easily check + * if this is the same (fixed) time as we got in a previous call and then + * avoid calling the callback again. */ + if(Curl_splaycomparekeys(multi->timetree->key, multi->timer_lastcall) == 0) + return 0; + + multi->timer_lastcall = multi->timetree->key; + + return multi->timer_cb((CURLM*)multi, timeout_ms, multi->timer_userp); +} + +void Curl_multi_set_easy_connection(struct SessionHandle *handle, + struct connectdata *conn) +{ + handle->easy_conn = conn; +} + +static bool isHandleAtHead(struct SessionHandle *handle, + struct curl_llist *pipeline) +{ + struct curl_llist_element *curr = pipeline->head; + if(curr) + return (curr->ptr == handle) ? TRUE : FALSE; + + return FALSE; +} + +/* + * multi_freetimeout() + * + * Callback used by the llist system when a single timeout list entry is + * destroyed. + */ +static void multi_freetimeout(void *user, void *entryptr) +{ + (void)user; + + /* the entry was plain malloc()'ed */ + free(entryptr); +} + +/* + * multi_addtimeout() + * + * Add a timestamp to the list of timeouts. Keep the list sorted so that head + * of list is always the timeout nearest in time. + * + */ +static CURLMcode +multi_addtimeout(struct curl_llist *timeoutlist, + struct timeval *stamp) +{ + struct curl_llist_element *e; + struct timeval *timedup; + struct curl_llist_element *prev = NULL; + + timedup = malloc(sizeof(*timedup)); + if(!timedup) + return CURLM_OUT_OF_MEMORY; + + /* copy the timestamp */ + memcpy(timedup, stamp, sizeof(*timedup)); + + if(Curl_llist_count(timeoutlist)) { + /* find the correct spot in the list */ + for(e = timeoutlist->head; e; e = e->next) { + struct timeval *checktime = e->ptr; + long diff = curlx_tvdiff(*checktime, *timedup); + if(diff > 0) + break; + prev = e; + } + + } + /* else + this is the first timeout on the list */ + + if(!Curl_llist_insert_next(timeoutlist, prev, timedup)) { + free(timedup); + return CURLM_OUT_OF_MEMORY; + } + + return CURLM_OK; +} + +/* + * Curl_expire() + * + * given a number of milliseconds from now to use to set the 'act before + * this'-time for the transfer, to be extracted by curl_multi_timeout() + * + * Note that the timeout will be added to a queue of timeouts if it defines a + * moment in time that is later than the current head of queue. + * + * Pass zero to clear all timeout values for this handle. +*/ +void Curl_expire(struct SessionHandle *data, long milli) +{ + struct Curl_multi *multi = data->multi; + struct timeval *nowp = &data->state.expiretime; + int rc; + + /* this is only interesting while there is still an associated multi struct + remaining! */ + if(!multi) + return; + + if(!milli) { + /* No timeout, clear the time data. */ + if(nowp->tv_sec || nowp->tv_usec) { + /* Since this is an cleared time, we must remove the previous entry from + the splay tree */ + struct curl_llist *list = data->state.timeoutlist; + + rc = Curl_splayremovebyaddr(multi->timetree, + &data->state.timenode, + &multi->timetree); + if(rc) + infof(data, "Internal error clearing splay node = %d\n", rc); + + /* flush the timeout list too */ + while(list->size > 0) + Curl_llist_remove(list, list->tail, NULL); + +#ifdef DEBUGBUILD + infof(data, "Expire cleared\n"); +#endif + nowp->tv_sec = 0; + nowp->tv_usec = 0; + } + } + else { + struct timeval set; + + set = Curl_tvnow(); + set.tv_sec += milli/1000; + set.tv_usec += (milli%1000)*1000; + + if(set.tv_usec >= 1000000) { + set.tv_sec++; + set.tv_usec -= 1000000; + } + + if(nowp->tv_sec || nowp->tv_usec) { + /* This means that the struct is added as a node in the splay tree. + Compare if the new time is earlier, and only remove-old/add-new if it + is. */ + long diff = curlx_tvdiff(set, *nowp); + if(diff > 0) { + /* the new expire time was later so just add it to the queue + and get out */ + multi_addtimeout(data->state.timeoutlist, &set); + return; + } + + /* the new time is newer than the presently set one, so add the current + to the queue and update the head */ + multi_addtimeout(data->state.timeoutlist, nowp); + + /* Since this is an updated time, we must remove the previous entry from + the splay tree first and then re-add the new value */ + rc = Curl_splayremovebyaddr(multi->timetree, + &data->state.timenode, + &multi->timetree); + if(rc) + infof(data, "Internal error removing splay node = %d\n", rc); + } + + *nowp = set; + data->state.timenode.payload = data; + multi->timetree = Curl_splayinsert(*nowp, + multi->timetree, + &data->state.timenode); + } +#if 0 + Curl_splayprint(multi->timetree, 0, TRUE); +#endif +} + +/* + * Curl_expire_latest() + * + * This is like Curl_expire() but will only add a timeout node to the list of + * timers if there is no timeout that will expire before the given time. + * + * Use this function if the code logic risks calling this function many times + * or if there's no particular conditional wait in the code for this specific + * time-out period to expire. + * + */ +void Curl_expire_latest(struct SessionHandle *data, long milli) +{ + struct timeval *exp = &data->state.expiretime; + + struct timeval set; + + set = Curl_tvnow(); + set.tv_sec += milli/1000; + set.tv_usec += (milli%1000)*1000; + + if(set.tv_usec >= 1000000) { + set.tv_sec++; + set.tv_usec -= 1000000; + } + + if(exp->tv_sec || exp->tv_usec) { + /* This means that the struct is added as a node in the splay tree. + Compare if the new time is earlier, and only remove-old/add-new if it + is. */ + long diff = curlx_tvdiff(set, *exp); + if(diff > 0) + /* the new expire time was later than the top time, so just skip this */ + return; + } + + /* Just add the timeout like normal */ + Curl_expire(data, milli); +} + +CURLMcode curl_multi_assign(CURLM *multi_handle, + curl_socket_t s, void *hashp) +{ + struct Curl_sh_entry *there = NULL; + struct Curl_multi *multi = (struct Curl_multi *)multi_handle; + + if(s != CURL_SOCKET_BAD) + there = Curl_hash_pick(multi->sockhash, (char *)&s, sizeof(curl_socket_t)); + + if(!there) + return CURLM_BAD_SOCKET; + + there->socketp = hashp; + + return CURLM_OK; +} + +size_t Curl_multi_max_host_connections(struct Curl_multi *multi) +{ + return multi ? multi->max_host_connections : 0; +} + +size_t Curl_multi_max_total_connections(struct Curl_multi *multi) +{ + return multi ? multi->max_total_connections : 0; +} + +size_t Curl_multi_max_pipeline_length(struct Curl_multi *multi) +{ + return multi ? multi->max_pipeline_length : 0; +} + +curl_off_t Curl_multi_content_length_penalty_size(struct Curl_multi *multi) +{ + return multi ? multi->content_length_penalty_size : 0; +} + +curl_off_t Curl_multi_chunk_length_penalty_size(struct Curl_multi *multi) +{ + return multi ? multi->chunk_length_penalty_size : 0; +} + +struct curl_llist *Curl_multi_pipelining_site_bl(struct Curl_multi *multi) +{ + return multi->pipelining_site_bl; +} + +struct curl_llist *Curl_multi_pipelining_server_bl(struct Curl_multi *multi) +{ + return multi->pipelining_server_bl; +} + +void Curl_multi_process_pending_handles(struct Curl_multi *multi) +{ + struct curl_llist_element *e = multi->pending->head; + + while(e) { + struct SessionHandle *data = e->ptr; + struct curl_llist_element *next = e->next; + + if(data->mstate == CURLM_STATE_CONNECT_PEND) { + multistate(data, CURLM_STATE_CONNECT); + + /* Remove this node from the list */ + Curl_llist_remove(multi->pending, e, NULL); + + /* Make sure that the handle will be processed soonish. */ + Curl_expire_latest(data, 1); + } + + e = next; /* operate on next handle */ + } +} + +#ifdef DEBUGBUILD +void Curl_multi_dump(const struct Curl_multi *multi_handle) +{ + struct Curl_multi *multi=(struct Curl_multi *)multi_handle; + struct SessionHandle *data; + int i; + fprintf(stderr, "* Multi status: %d handles, %d alive\n", + multi->num_easy, multi->num_alive); + for(data=multi->easyp; data; data = data->next) { + if(data->mstate < CURLM_STATE_COMPLETED) { + /* only display handles that are not completed */ + fprintf(stderr, "handle %p, state %s, %d sockets\n", + (void *)data, + statename[data->mstate], data->numsocks); + for(i=0; i < data->numsocks; i++) { + curl_socket_t s = data->sockets[i]; + struct Curl_sh_entry *entry = + Curl_hash_pick(multi->sockhash, (char *)&s, sizeof(s)); + + fprintf(stderr, "%d ", (int)s); + if(!entry) { + fprintf(stderr, "INTERNAL CONFUSION\n"); + continue; + } + fprintf(stderr, "[%s %s] ", + entry->action&CURL_POLL_IN?"RECVING":"", + entry->action&CURL_POLL_OUT?"SENDING":""); + } + if(data->numsocks) + fprintf(stderr, "\n"); + } + } +} +#endif |