diff options
Diffstat (limited to 'external/libcurl_android/jni/libcurl/src/tool_help.c')
| -rwxr-xr-x | external/libcurl_android/jni/libcurl/src/tool_help.c | 333 |
1 files changed, 333 insertions, 0 deletions
diff --git a/external/libcurl_android/jni/libcurl/src/tool_help.c b/external/libcurl_android/jni/libcurl/src/tool_help.c new file mode 100755 index 00000000..c255be0b --- /dev/null +++ b/external/libcurl_android/jni/libcurl/src/tool_help.c @@ -0,0 +1,333 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at http://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ +#include "tool_setup.h" + +#include "tool_panykey.h" +#include "tool_help.h" +#include "tool_libinfo.h" +#include "tool_version.h" + +#include "memdebug.h" /* keep this as LAST include */ + +#ifdef MSDOS +# define USE_WATT32 +#endif + +/* + * A few of these source lines are >80 columns wide, but that's only because + * breaking the strings narrower makes this chunk look even worse! + * + * Starting with 7.18.0, this list of command line options is sorted based + * on the long option name. It is not done automatically, although a command + * line like the following can help out: + * + * curl --help | cut -c5- | grep "^-" | sort + */ + +static const char *const helptext[] = { + "Usage: curl [options...] <url>", + "Options: (H) means HTTP/HTTPS only, (F) means FTP only", + " --anyauth Pick \"any\" authentication method (H)", + " -a, --append Append to target file when uploading (F/SFTP)", + " --basic Use HTTP Basic Authentication (H)", + " --cacert FILE CA certificate to verify peer against (SSL)", + " --capath DIR CA directory to verify peer against (SSL)", + " -E, --cert CERT[:PASSWD] Client certificate file and password (SSL)", + " --cert-type TYPE Certificate file type (DER/PEM/ENG) (SSL)", + " --ciphers LIST SSL ciphers to use (SSL)", + " --compressed Request compressed response (using deflate or gzip)", + " -K, --config FILE Read config from FILE", + " --connect-timeout SECONDS Maximum time allowed for connection", + " -C, --continue-at OFFSET Resumed transfer OFFSET", + " -b, --cookie STRING/FILE Read cookies from STRING/FILE (H)", + " -c, --cookie-jar FILE Write cookies to FILE after operation (H)", + " --create-dirs Create necessary local directory hierarchy", + " --crlf Convert LF to CRLF in upload", + " --crlfile FILE Get a CRL list in PEM format from the given file", + " -d, --data DATA HTTP POST data (H)", + " --data-ascii DATA HTTP POST ASCII data (H)", + " --data-binary DATA HTTP POST binary data (H)", + " --data-urlencode DATA HTTP POST data url encoded (H)", + " --delegation STRING GSS-API delegation permission", + " --digest Use HTTP Digest Authentication (H)", + " --disable-eprt Inhibit using EPRT or LPRT (F)", + " --disable-epsv Inhibit using EPSV (F)", + " --dns-servers DNS server addrs to use: 1.1.1.1;2.2.2.2", + " --dns-interface Interface to use for DNS requests", + " --dns-ipv4-addr IPv4 address to use for DNS requests, dot notation", + " --dns-ipv6-addr IPv6 address to use for DNS requests, dot notation", + " -D, --dump-header FILE Write the headers to FILE", + " --egd-file FILE EGD socket path for random data (SSL)", + " --engine ENGINE Crypto engine (use \"--engine list\" for list) (SSL)", +#ifdef USE_ENVIRONMENT + " --environment Write results to environment variables (RISC OS)", +#endif + " -f, --fail Fail silently (no output at all) on HTTP errors (H)", + " -F, --form CONTENT Specify HTTP multipart POST data (H)", + " --form-string STRING Specify HTTP multipart POST data (H)", + " --ftp-account DATA Account data string (F)", + " --ftp-alternative-to-user COMMAND " + "String to replace \"USER [name]\" (F)", + " --ftp-create-dirs Create the remote dirs if not present (F)", + " --ftp-method [MULTICWD/NOCWD/SINGLECWD] Control CWD usage (F)", + " --ftp-pasv Use PASV/EPSV instead of PORT (F)", + " -P, --ftp-port ADR Use PORT with given address instead of PASV (F)", + " --ftp-skip-pasv-ip Skip the IP address for PASV (F)\n" + " --ftp-pret Send PRET before PASV (for drftpd) (F)", + " --ftp-ssl-ccc Send CCC after authenticating (F)", + " --ftp-ssl-ccc-mode ACTIVE/PASSIVE Set CCC mode (F)", + " --ftp-ssl-control Require SSL/TLS for FTP login, " + "clear for transfer (F)", + " -G, --get Send the -d data with a HTTP GET (H)", + " -g, --globoff Disable URL sequences and ranges using {} and []", + " -H, --header LINE Pass custom header LINE to server (H)", + " -I, --head Show document info only", + " -h, --help This help text", + " --hostpubmd5 MD5 " + "Hex-encoded MD5 string of the host public key. (SSH)", + " -0, --http1.0 Use HTTP 1.0 (H)", + " --http1.1 Use HTTP 1.1 (H)", + " --http2 Use HTTP 2 (H)", + " --ignore-content-length Ignore the HTTP Content-Length header", + " -i, --include Include protocol headers in the output (H/F)", + " -k, --insecure Allow connections to SSL sites without certs (H)", + " --interface INTERFACE Use network INTERFACE (or address)", + " -4, --ipv4 Resolve name to IPv4 address", + " -6, --ipv6 Resolve name to IPv6 address", + " -j, --junk-session-cookies Ignore session cookies read from file (H)", + " --keepalive-time SECONDS Wait SECONDS between keepalive probes", + " --key KEY Private key file name (SSL/SSH)", + " --key-type TYPE Private key file type (DER/PEM/ENG) (SSL)", + " --krb LEVEL Enable Kerberos with security LEVEL (F)", +#ifndef CURL_DISABLE_LIBCURL_OPTION + " --libcurl FILE Dump libcurl equivalent code of this command line", +#endif + " --limit-rate RATE Limit transfer speed to RATE", + " -l, --list-only List only mode (F/POP3)", + " --local-port RANGE Force use of RANGE for local port numbers", + " -L, --location Follow redirects (H)", + " --location-trusted " + "Like '--location', and send auth to other hosts (H)", + " --login-options OPTIONS Server login options (IMAP, POP3, SMTP)", + " -M, --manual Display the full manual", + " --mail-from FROM Mail from this address (SMTP)", + " --mail-rcpt TO Mail to this/these addresses (SMTP)", + " --mail-auth AUTH Originator address of the original email (SMTP)", + " --max-filesize BYTES Maximum file size to download (H/F)", + " --max-redirs NUM Maximum number of redirects allowed (H)", + " -m, --max-time SECONDS Maximum time allowed for the transfer", + " --metalink Process given URLs as metalink XML file", + " --negotiate Use HTTP Negotiate (SPNEGO) authentication (H)", + " -n, --netrc Must read .netrc for user name and password", + " --netrc-optional Use either .netrc or URL; overrides -n", + " --netrc-file FILE Specify FILE for netrc", + " -: --next " + "Allows the following URL to use a separate set of options", + " --no-alpn Disable the ALPN TLS extension (H)", + " -N, --no-buffer Disable buffering of the output stream", + " --no-keepalive Disable keepalive use on the connection", + " --no-npn Disable the NPN TLS extension (H)", + " --no-sessionid Disable SSL session-ID reusing (SSL)", + " --noproxy List of hosts which do not use proxy", + " --ntlm Use HTTP NTLM authentication (H)", + " --oauth2-bearer TOKEN OAuth 2 Bearer Token (IMAP, POP3, SMTP)", + " -o, --output FILE Write to FILE instead of stdout", + " --pass PASS Pass phrase for the private key (SSL/SSH)", + " --post301 " + "Do not switch to GET after following a 301 redirect (H)", + " --post302 " + "Do not switch to GET after following a 302 redirect (H)", + " --post303 " + "Do not switch to GET after following a 303 redirect (H)", + " -#, --progress-bar Display transfer progress as a progress bar", + " --proto PROTOCOLS Enable/disable PROTOCOLS", + " --proto-redir PROTOCOLS Enable/disable PROTOCOLS on redirect", + " -x, --proxy [PROTOCOL://]HOST[:PORT] Use proxy on given port", + " --proxy-anyauth Pick \"any\" proxy authentication method (H)", + " --proxy-basic Use Basic authentication on the proxy (H)", + " --proxy-digest Use Digest authentication on the proxy (H)", + " --proxy-negotiate " + "Use HTTP Negotiate (SPNEGO) authentication on the proxy (H)", + " --proxy-ntlm Use NTLM authentication on the proxy (H)", + " -U, --proxy-user USER[:PASSWORD] Proxy user and password", + " --proxy1.0 HOST[:PORT] Use HTTP/1.0 proxy on given port", + " -p, --proxytunnel Operate through a HTTP proxy tunnel (using CONNECT)", + " --pubkey KEY Public key file name (SSH)", + " -Q, --quote CMD Send command(s) to server before transfer (F/SFTP)", + " --random-file FILE File for reading random data from (SSL)", + " -r, --range RANGE Retrieve only the bytes within RANGE", + " --raw Do HTTP \"raw\"; no transfer decoding (H)", + " -e, --referer Referer URL (H)", + " -J, --remote-header-name Use the header-provided filename (H)", + " -O, --remote-name Write output to a file named as the remote file", + " --remote-name-all Use the remote file name for all URLs", + " -R, --remote-time Set the remote file's time on the local output", + " -X, --request COMMAND Specify request command to use", + " --resolve HOST:PORT:ADDRESS Force resolve of HOST:PORT to ADDRESS", + " --retry NUM " + "Retry request NUM times if transient problems occur", + " --retry-delay SECONDS Wait SECONDS between retries", + " --retry-max-time SECONDS Retry only within this period", + " --sasl-ir Enable initial response in SASL authentication", + " -S, --show-error " + "Show error. With -s, make curl show errors when they occur", + " -s, --silent Silent mode (don't output anything)", + " --socks4 HOST[:PORT] SOCKS4 proxy on given host + port", + " --socks4a HOST[:PORT] SOCKS4a proxy on given host + port", + " --socks5 HOST[:PORT] SOCKS5 proxy on given host + port", + " --socks5-hostname HOST[:PORT] " + "SOCKS5 proxy, pass host name to proxy", +#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI) + " --socks5-gssapi-service NAME SOCKS5 proxy service name for GSS-API", + " --socks5-gssapi-nec Compatibility with NEC SOCKS5 server", +#endif + " -Y, --speed-limit RATE " + "Stop transfers below RATE for 'speed-time' secs", + " -y, --speed-time SECONDS " + "Trigger 'speed-limit' abort after SECONDS (default: 30)", + " --ssl Try SSL/TLS (FTP, IMAP, POP3, SMTP)", + " --ssl-reqd Require SSL/TLS (FTP, IMAP, POP3, SMTP)", + " -2, --sslv2 Use SSLv2 (SSL)", + " -3, --sslv3 Use SSLv3 (SSL)", + " --ssl-allow-beast Allow security flaw to improve interop (SSL)", + " --stderr FILE Where to redirect stderr (use \"-\" for stdout)", + " --tcp-nodelay Use the TCP_NODELAY option", + " -t, --telnet-option OPT=VAL Set telnet option", + " --tftp-blksize VALUE Set TFTP BLKSIZE option (must be >512)", + " -z, --time-cond TIME Transfer based on a time condition", + " -1, --tlsv1 Use => TLSv1 (SSL)", + " --tlsv1.0 Use TLSv1.0 (SSL)", + " --tlsv1.1 Use TLSv1.1 (SSL)", + " --tlsv1.2 Use TLSv1.2 (SSL)", + " --trace FILE Write a debug trace to FILE", + " --trace-ascii FILE Like --trace, but without hex output", + " --trace-time Add time stamps to trace/verbose output", + " --tr-encoding Request compressed transfer encoding (H)", + " -T, --upload-file FILE Transfer FILE to destination", + " --url URL URL to work with", + " -B, --use-ascii Use ASCII/text transfer", + " -u, --user USER[:PASSWORD] Server user and password", + " --tlsuser USER TLS username", + " --tlspassword STRING TLS password", + " --tlsauthtype STRING TLS authentication type (default: SRP)", + " -A, --user-agent STRING Send User-Agent STRING to server (H)", + " -v, --verbose Make the operation more talkative", + " -V, --version Show version number and quit", +#ifdef USE_WATT32 + " --wdebug Turn on Watt-32 debugging", +#endif + " -w, --write-out FORMAT Use output FORMAT after completion", + " --xattr Store metadata in extended file attributes", + " -q Disable .curlrc (must be first parameter)", + NULL +}; + +#ifdef NETWARE +# define PRINT_LINES_PAUSE 23 +#endif + +#ifdef __SYMBIAN32__ +# define PRINT_LINES_PAUSE 16 +#endif + +struct feat { + const char *name; + int bitmask; +}; + +static const struct feat feats[] = { + {"AsynchDNS", CURL_VERSION_ASYNCHDNS}, + {"Debug", CURL_VERSION_DEBUG}, + {"TrackMemory", CURL_VERSION_CURLDEBUG}, + {"IDN", CURL_VERSION_IDN}, + {"IPv6", CURL_VERSION_IPV6}, + {"Largefile", CURL_VERSION_LARGEFILE}, + {"SSPI", CURL_VERSION_SSPI}, + {"GSS-API", CURL_VERSION_GSSAPI}, + {"SPNEGO", CURL_VERSION_SPNEGO}, + {"NTLM", CURL_VERSION_NTLM}, + {"NTLM_WB", CURL_VERSION_NTLM_WB}, + {"SSL", CURL_VERSION_SSL}, + {"krb4", CURL_VERSION_KERBEROS4}, + {"libz", CURL_VERSION_LIBZ}, + {"CharConv", CURL_VERSION_CONV}, + {"TLS-SRP", CURL_VERSION_TLSAUTH_SRP}, + {"HTTP2", CURL_VERSION_HTTP2} +}; + +void tool_help(void) +{ + int i; + for(i = 0; helptext[i]; i++) { + puts(helptext[i]); +#ifdef PRINT_LINES_PAUSE + if(i && ((i % PRINT_LINES_PAUSE) == 0)) + tool_pressanykey(); +#endif + } +} + +void tool_version_info(void) +{ + const char *const *proto; + + printf(CURL_ID "%s\n", curl_version()); + if(curlinfo->protocols) { + printf("Protocols: "); + for(proto = curlinfo->protocols; *proto; ++proto) { + printf("%s ", *proto); + } + puts(""); /* newline */ + } + if(curlinfo->features) { + unsigned int i; + printf("Features: "); + for(i = 0; i < sizeof(feats)/sizeof(feats[0]); i++) { + if(curlinfo->features & feats[i].bitmask) + printf("%s ", feats[i].name); + } +#ifdef USE_METALINK + printf("Metalink "); +#endif + puts(""); /* newline */ + } +} + +void tool_list_engines(CURL *curl) +{ + struct curl_slist *engines = NULL; + + /* Get the list of engines */ + curl_easy_getinfo(curl, CURLINFO_SSL_ENGINES, &engines); + + puts("Build-time engines:"); + if(engines) { + for(; engines; engines = engines->next) + printf(" %s\n", engines->data); + } + else { + puts(" <none>"); + } + + /* Cleanup the list of engines */ + curl_slist_free_all(engines); +} |