diff options
Diffstat (limited to 'metis/iOS/net/bpf.h')
| -rw-r--r-- | metis/iOS/net/bpf.h | 1201 |
1 files changed, 1201 insertions, 0 deletions
diff --git a/metis/iOS/net/bpf.h b/metis/iOS/net/bpf.h new file mode 100644 index 00000000..a7ee50d8 --- /dev/null +++ b/metis/iOS/net/bpf.h @@ -0,0 +1,1201 @@ +/* + * Copyright (c) 2000-2014 Apple Inc. All rights reserved. + * + * @APPLE_OSREFERENCE_LICENSE_HEADER_START@ + * + * This file contains Original Code and/or Modifications of Original Code + * as defined in and that are subject to the Apple Public Source License + * Version 2.0 (the 'License'). You may not use this file except in + * compliance with the License. The rights granted to you under the License + * may not be used to create, or enable the creation or redistribution of, + * unlawful or unlicensed copies of an Apple operating system, or to + * circumvent, violate, or enable the circumvention or violation of, any + * terms of an Apple operating system software license agreement. + * + * Please obtain a copy of the License at + * http://www.opensource.apple.com/apsl/ and read it before using this file. + * + * The Original Code and all software distributed under the License are + * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER + * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, + * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. + * Please see the License for the specific language governing rights and + * limitations under the License. + * + * @APPLE_OSREFERENCE_LICENSE_HEADER_END@ + */ +/* + * Copyright (c) 1990, 1991, 1993 + * The Regents of the University of California. All rights reserved. + * + * This code is derived from the Stanford/CMU enet packet filter, + * (net/enet.c) distributed as part of 4.3BSD, and code contributed + * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence + * Berkeley Laboratory. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)bpf.h 8.1 (Berkeley) 6/10/93 + * @(#)bpf.h 1.34 (LBL) 6/16/96 + * + * $FreeBSD: src/sys/net/bpf.h,v 1.21.2.3 2001/08/01 00:23:13 fenner Exp $ + */ +/* + * NOTICE: This file was modified by SPARTA, Inc. in 2006 to introduce + * support for mandatory and extensible security protections. This notice + * is included in support of clause 2.2 (b) of the Apple Public License, + * Version 2.0. + */ + +#ifndef _NET_BPF_H_ +#define _NET_BPF_H_ +#include <sys/param.h> +#include <sys/appleapiopts.h> +#include <sys/types.h> +#include <sys/time.h> +#include <sys/cdefs.h> +#include <stdint.h> + + +/* BSD style release date */ +#define BPF_RELEASE 199606 + +typedef int32_t bpf_int32; +typedef u_int32_t bpf_u_int32; + +/* + * Alignment macros. BPF_WORDALIGN rounds up to the next + * even multiple of BPF_ALIGNMENT. + */ +#define BPF_ALIGNMENT sizeof(int32_t) +#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1)) + +#define BPF_MAXINSNS 512 +#define BPF_MAXBUFSIZE 0x80000 +#define BPF_MINBUFSIZE 32 + +/* + * Structure for BIOCSETF. + */ +struct bpf_program { + u_int bf_len; + struct bpf_insn *bf_insns; +}; + + +/* + * Struct returned by BIOCGSTATS. + */ +struct bpf_stat { + u_int bs_recv; /* number of packets received */ + u_int bs_drop; /* number of packets dropped */ +}; + +/* + * Struct return by BIOCVERSION. This represents the version number of + * the filter language described by the instruction encodings below. + * bpf understands a program iff kernel_major == filter_major && + * kernel_minor >= filter_minor, that is, if the value returned by the + * running kernel has the same major number and a minor number equal + * equal to or less than the filter being downloaded. Otherwise, the + * results are undefined, meaning an error may be returned or packets + * may be accepted haphazardly. + * It has nothing to do with the source code version. + */ +struct bpf_version { + u_short bv_major; + u_short bv_minor; +}; +#if defined(__LP64__) +#include <sys/_types/_timeval32.h> + +#define BPF_TIMEVAL timeval32 +#else +#define BPF_TIMEVAL timeval +#endif /* __LP64__ */ +/* Current version number of filter architecture. */ +#define BPF_MAJOR_VERSION 1 +#define BPF_MINOR_VERSION 1 + +#define BIOCGBLEN _IOR('B',102, u_int) +#define BIOCSBLEN _IOWR('B',102, u_int) +#define BIOCSETF _IOW('B',103, struct bpf_program) +#define BIOCFLUSH _IO('B',104) +#define BIOCPROMISC _IO('B',105) +#define BIOCGDLT _IOR('B',106, u_int) +#define BIOCGETIF _IOR('B',107, struct ifreq) +#define BIOCSETIF _IOW('B',108, struct ifreq) +#define BIOCSRTIMEOUT _IOW('B',109, struct timeval) +#define BIOCGRTIMEOUT _IOR('B',110, struct timeval) +#define BIOCGSTATS _IOR('B',111, struct bpf_stat) +#define BIOCIMMEDIATE _IOW('B',112, u_int) +#define BIOCVERSION _IOR('B',113, struct bpf_version) +#define BIOCGRSIG _IOR('B',114, u_int) +#define BIOCSRSIG _IOW('B',115, u_int) +#define BIOCGHDRCMPLT _IOR('B',116, u_int) +#define BIOCSHDRCMPLT _IOW('B',117, u_int) +#define BIOCGSEESENT _IOR('B',118, u_int) +#define BIOCSSEESENT _IOW('B',119, u_int) +#define BIOCSDLT _IOW('B',120, u_int) +#define BIOCGDLTLIST _IOWR('B',121, struct bpf_dltlist) +#define BIOCSETFNR _IOW('B', 126, struct bpf_program) +/* + * Structure prepended to each packet. + */ +struct bpf_hdr { + struct BPF_TIMEVAL bh_tstamp; /* time stamp */ + bpf_u_int32 bh_caplen; /* length of captured portion */ + bpf_u_int32 bh_datalen; /* original length of packet */ + u_short bh_hdrlen; /* length of bpf header (this struct + plus alignment padding) */ +}; + +/* + * Data-link level type codes. + */ +#define DLT_NULL 0 /* no link-layer encapsulation */ +#define DLT_EN10MB 1 /* Ethernet (10Mb) */ +#define DLT_EN3MB 2 /* Experimental Ethernet (3Mb) */ +#define DLT_AX25 3 /* Amateur Radio AX.25 */ +#define DLT_PRONET 4 /* Proteon ProNET Token Ring */ +#define DLT_CHAOS 5 /* Chaos */ +#define DLT_IEEE802 6 /* IEEE 802 Networks */ +#define DLT_ARCNET 7 /* ARCNET */ +#define DLT_SLIP 8 /* Serial Line IP */ +#define DLT_PPP 9 /* Point-to-point Protocol */ +#define DLT_FDDI 10 /* FDDI */ +#define DLT_ATM_RFC1483 11 /* LLC/SNAP encapsulated atm */ +#define DLT_RAW 12 /* raw IP */ + +/* + * These are values from BSD/OS's "bpf.h". + * These are not the same as the values from the traditional libpcap + * "bpf.h"; however, these values shouldn't be generated by any + * OS other than BSD/OS, so the correct values to use here are the + * BSD/OS values. + * + * Platforms that have already assigned these values to other + * DLT_ codes, however, should give these codes the values + * from that platform, so that programs that use these codes will + * continue to compile - even though they won't correctly read + * files of these types. + */ +#define DLT_SLIP_BSDOS 15 /* BSD/OS Serial Line IP */ +#define DLT_PPP_BSDOS 16 /* BSD/OS Point-to-point Protocol */ + +/* + * 17 was used for DLT_PFLOG in OpenBSD; it no longer is. + * + * It was DLT_LANE8023 in SuSE 6.3, so we defined LINKTYPE_PFLOG + * as 117 so that pflog captures would use a link-layer header type + * value that didn't collide with any other values. On all + * platforms other than OpenBSD, we defined DLT_PFLOG as 117, + * and we mapped between LINKTYPE_PFLOG and DLT_PFLOG. + * + * OpenBSD eventually switched to using 117 for DLT_PFLOG as well. + * + * Don't use 17 for anything else. + */ + +/* + * 18 is used for DLT_PFSYNC in OpenBSD, NetBSD, DragonFly BSD and + * Mac OS X; don't use it for anything else. (FreeBSD uses 121, + * which collides with DLT_HHDLC, even though it doesn't use 18 + * for anything and doesn't appear to have ever used it for anything.) + * + * We define it as 18 on those platforms; it is, unfortunately, used + * for DLT_CIP in Suse 6.3, so we don't define it as DLT_PFSYNC + * in general. As the packet format for it, like that for + * DLT_PFLOG, is not only OS-dependent but OS-version-dependent, + * we don't support printing it in tcpdump except on OSes that + * have the relevant header files, so it's not that useful on + * other platforms. + */ +#define DLT_PFSYNC 18 /* Packet filter state syncing */ + +#define DLT_ATM_CLIP 19 /* Linux Classical-IP over ATM */ + +/* + * These values are defined by NetBSD; other platforms should refrain from + * using them for other purposes, so that NetBSD savefiles with link + * types of 50 or 51 can be read as this type on all platforms. + */ +#define DLT_PPP_SERIAL 50 /* PPP over serial with HDLC encapsulation */ +#define DLT_PPP_ETHER 51 /* PPP over Ethernet */ + +/* + * The Axent Raptor firewall - now the Symantec Enterprise Firewall - uses + * a link-layer type of 99 for the tcpdump it supplies. The link-layer + * header has 6 bytes of unknown data, something that appears to be an + * Ethernet type, and 36 bytes that appear to be 0 in at least one capture + * I've seen. + */ +#define DLT_SYMANTEC_FIREWALL 99 + +/* + * Values between 100 and 103 are used in capture file headers as + * link-layer header type LINKTYPE_ values corresponding to DLT_ types + * that differ between platforms; don't use those values for new DLT_ + * new types. + */ + +/* + * Values starting with 104 are used for newly-assigned link-layer + * header type values; for those link-layer header types, the DLT_ + * value returned by pcap_datalink() and passed to pcap_open_dead(), + * and the LINKTYPE_ value that appears in capture files, are the + * same. + * + * DLT_MATCHING_MIN is the lowest such value; DLT_MATCHING_MAX is + * the highest such value. + */ +#define DLT_MATCHING_MIN 104 + +/* + * This value was defined by libpcap 0.5; platforms that have defined + * it with a different value should define it here with that value - + * a link type of 104 in a save file will be mapped to DLT_C_HDLC, + * whatever value that happens to be, so programs will correctly + * handle files with that link type regardless of the value of + * DLT_C_HDLC. + * + * The name DLT_C_HDLC was used by BSD/OS; we use that name for source + * compatibility with programs written for BSD/OS. + * + * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well, + * for source compatibility with programs written for libpcap 0.5. + */ +#define DLT_C_HDLC 104 /* Cisco HDLC */ +#define DLT_CHDLC DLT_C_HDLC + +#define DLT_IEEE802_11 105 /* IEEE 802.11 wireless */ + +/* + * Values between 106 and 107 are used in capture file headers as + * link-layer types corresponding to DLT_ types that might differ + * between platforms; don't use those values for new DLT_ new types. + */ + +/* + * Frame Relay; BSD/OS has a DLT_FR with a value of 11, but that collides + * with other values. + * DLT_FR and DLT_FRELAY packets start with the Q.922 Frame Relay header + * (DLCI, etc.). + */ +#define DLT_FRELAY 107 + +/* + * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except + * that the AF_ type in the link-layer header is in network byte order. + * + * OpenBSD defines it as 12, but that collides with DLT_RAW, so we + * define it as 108 here. If OpenBSD picks up this file, it should + * define DLT_LOOP as 12 in its version, as per the comment above - + * and should not use 108 for any purpose. + */ +#define DLT_LOOP 108 + +/* + * Values between 109 and 112 are used in capture file headers as + * link-layer types corresponding to DLT_ types that might differ + * between platforms; don't use those values for new DLT_ new types. + */ + +/* + * Encapsulated packets for IPsec; DLT_ENC is 13 in OpenBSD, but that's + * DLT_SLIP_BSDOS in NetBSD, so we don't use 13 for it in OSes other + * than OpenBSD. + */ +#define DLT_ENC 109 + +/* + * This is for Linux cooked sockets. + */ +#define DLT_LINUX_SLL 113 + +/* + * Apple LocalTalk hardware. + */ +#define DLT_LTALK 114 + +/* + * Acorn Econet. + */ +#define DLT_ECONET 115 + +/* + * Reserved for use with OpenBSD ipfilter. + */ +#define DLT_IPFILTER 116 + +/* + * For use in capture-file headers as a link-layer type corresponding + * to OpenBSD PF (Packet Filter) log. + */ +#define DLT_PFLOG 117 + +/* + * Registered for Cisco-internal use. + */ +#define DLT_CISCO_IOS 118 + +/* + * Reserved for 802.11 cards using the Prism II chips, with a link-layer + * header including Prism monitor mode information plus an 802.11 + * header. + */ +#define DLT_PRISM_HEADER 119 + +/* + * Reserved for Aironet 802.11 cards, with an Aironet link-layer header + * (see Doug Ambrisko's FreeBSD patches). + */ +#define DLT_AIRONET_HEADER 120 + +/* + * Reserved for Siemens HiPath HDLC. XXX + */ +#define DLT_HHDLC 121 + +/* + * Reserved for RFC 2625 IP-over-Fibre Channel. + */ +#define DLT_IP_OVER_FC 122 + +/* + * Reserved for Full Frontal ATM on Solaris. + */ +#define DLT_SUNATM 123 + +/* + * Reserved as per request from Kent Dahlgren <kent@praesum.com> + * for private use. + */ +#define DLT_RIO 124 /* RapidIO */ +#define DLT_PCI_EXP 125 /* PCI Express */ +#define DLT_AURORA 126 /* Xilinx Aurora link layer */ + +/* + * BSD header for 802.11 plus a number of bits of link-layer information + * including radio information. + */ +#ifndef DLT_IEEE802_11_RADIO +#define DLT_IEEE802_11_RADIO 127 +#endif + +/* + * Reserved for TZSP encapsulation. + */ +#define DLT_TZSP 128 /* Tazmen Sniffer Protocol */ + +/* + * Reserved for Linux ARCNET. + */ +#define DLT_ARCNET_LINUX 129 + +/* + * Juniper-private data link types. + */ +#define DLT_JUNIPER_MLPPP 130 +#define DLT_JUNIPER_MLFR 131 +#define DLT_JUNIPER_ES 132 +#define DLT_JUNIPER_GGSN 133 +#define DLT_JUNIPER_MFR 134 +#define DLT_JUNIPER_ATM2 135 +#define DLT_JUNIPER_SERVICES 136 +#define DLT_JUNIPER_ATM1 137 + +/* + * Apple IP-over-IEEE 1394, as per a request from Dieter Siegmund + * <dieter@apple.com>. The header that's presented is an Ethernet-like + * header: + * + * #define FIREWIRE_EUI64_LEN 8 + * struct firewire_header { + * u_char firewire_dhost[FIREWIRE_EUI64_LEN]; + * u_char firewire_shost[FIREWIRE_EUI64_LEN]; + * u_short firewire_type; + * }; + * + * with "firewire_type" being an Ethernet type value, rather than, + * for example, raw GASP frames being handed up. + */ +#define DLT_APPLE_IP_OVER_IEEE1394 138 + +/* + * Various SS7 encapsulations, as per a request from Jeff Morriss + * <jeff.morriss[AT]ulticom.com> and subsequent discussions. + */ +#define DLT_MTP2_WITH_PHDR 139 /* pseudo-header with various info, followed by MTP2 */ +#define DLT_MTP2 140 /* MTP2, without pseudo-header */ +#define DLT_MTP3 141 /* MTP3, without pseudo-header or MTP2 */ +#define DLT_SCCP 142 /* SCCP, without pseudo-header or MTP2 or MTP3 */ + +/* + * Reserved for DOCSIS. + */ +#define DLT_DOCSIS 143 + +/* + * Reserved for Linux IrDA. + */ +#define DLT_LINUX_IRDA 144 + +/* + * Reserved for IBM SP switch and IBM Next Federation switch. + */ +#define DLT_IBM_SP 145 +#define DLT_IBM_SN 146 + +/* + * Reserved for private use. If you have some link-layer header type + * that you want to use within your organization, with the capture files + * using that link-layer header type not ever be sent outside your + * organization, you can use these values. + * + * No libpcap release will use these for any purpose, nor will any + * tcpdump release use them, either. + * + * Do *NOT* use these in capture files that you expect anybody not using + * your private versions of capture-file-reading tools to read; in + * particular, do *NOT* use them in products, otherwise you may find that + * people won't be able to use tcpdump, or snort, or Ethereal, or... to + * read capture files from your firewall/intrusion detection/traffic + * monitoring/etc. appliance, or whatever product uses that DLT_ value, + * and you may also find that the developers of those applications will + * not accept patches to let them read those files. + * + * Also, do not use them if somebody might send you a capture using them + * for *their* private type and tools using them for *your* private type + * would have to read them. + * + * Instead, ask "tcpdump-workers@tcpdump.org" for a new DLT_ value, + * as per the comment above, and use the type you're given. + */ +#define DLT_USER0 147 +#define DLT_USER1 148 +#define DLT_USER2 149 +#define DLT_USER3 150 +#define DLT_USER4 151 +#define DLT_USER5 152 +#define DLT_USER6 153 +#define DLT_USER7 154 +#define DLT_USER8 155 +#define DLT_USER9 156 +#define DLT_USER10 157 +#define DLT_USER11 158 +#define DLT_USER12 159 +#define DLT_USER13 160 +#define DLT_USER14 161 +#define DLT_USER15 162 + + +/* + * For future use with 802.11 captures - defined by AbsoluteValue + * Systems to store a number of bits of link-layer information + * including radio information: + * + * http://www.shaftnet.org/~pizza/software/capturefrm.txt + * + * but it might be used by some non-AVS drivers now or in the + * future. + */ +#define DLT_IEEE802_11_RADIO_AVS 163 /* 802.11 plus AVS radio header */ + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler <hannes@juniper.net>. The DLT_s are used + * for passing on chassis-internal metainformation such as + * QOS profiles, etc.. + */ +#define DLT_JUNIPER_MONITOR 164 + +/* + * Reserved for BACnet MS/TP. + */ +#define DLT_BACNET_MS_TP 165 + +/* + * Another PPP variant as per request from Karsten Keil <kkeil@suse.de>. + * + * This is used in some OSes to allow a kernel socket filter to distinguish + * between incoming and outgoing packets, on a socket intended to + * supply pppd with outgoing packets so it can do dial-on-demand and + * hangup-on-lack-of-demand; incoming packets are filtered out so they + * don't cause pppd to hold the connection up (you don't want random + * input packets such as port scans, packets from old lost connections, + * etc. to force the connection to stay up). + * + * The first byte of the PPP header (0xff03) is modified to accomodate + * the direction - 0x00 = IN, 0x01 = OUT. + */ +#define DLT_PPP_PPPD 166 + +/* + * Names for backwards compatibility with older versions of some PPP + * software; new software should use DLT_PPP_PPPD. + */ +#define DLT_PPP_WITH_DIRECTION DLT_PPP_PPPD +#define DLT_LINUX_PPP_WITHDIRECTION DLT_PPP_PPPD + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler <hannes@juniper.net>. The DLT_s are used + * for passing on chassis-internal metainformation such as + * QOS profiles, cookies, etc.. + */ +#define DLT_JUNIPER_PPPOE 167 +#define DLT_JUNIPER_PPPOE_ATM 168 + +#define DLT_GPRS_LLC 169 /* GPRS LLC */ +#define DLT_GPF_T 170 /* GPF-T (ITU-T G.7041/Y.1303) */ +#define DLT_GPF_F 171 /* GPF-F (ITU-T G.7041/Y.1303) */ + +/* + * Requested by Oolan Zimmer <oz@gcom.com> for use in Gcom's T1/E1 line + * monitoring equipment. + */ +#define DLT_GCOM_T1E1 172 +#define DLT_GCOM_SERIAL 173 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler <hannes@juniper.net>. The DLT_ is used + * for internal communication to Physical Interface Cards (PIC) + */ +#define DLT_JUNIPER_PIC_PEER 174 + +/* + * Link types requested by Gregor Maier <gregor@endace.com> of Endace + * Measurement Systems. They add an ERF header (see + * http://www.endace.com/support/EndaceRecordFormat.pdf) in front of + * the link-layer header. + */ +#define DLT_ERF_ETH 175 /* Ethernet */ +#define DLT_ERF_POS 176 /* Packet-over-SONET */ + +/* + * Requested by Daniele Orlandi <daniele@orlandi.com> for raw LAPD + * for vISDN (http://www.orlandi.com/visdn/). Its link-layer header + * includes additional information before the LAPD header, so it's + * not necessarily a generic LAPD header. + */ +#define DLT_LINUX_LAPD 177 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler <hannes@juniper.net>. + * The DLT_ are used for prepending meta-information + * like interface index, interface name + * before standard Ethernet, PPP, Frelay & C-HDLC Frames + */ +#define DLT_JUNIPER_ETHER 178 +#define DLT_JUNIPER_PPP 179 +#define DLT_JUNIPER_FRELAY 180 +#define DLT_JUNIPER_CHDLC 181 + +/* + * Multi Link Frame Relay (FRF.16) + */ +#define DLT_MFR 182 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler <hannes@juniper.net>. + * The DLT_ is used for internal communication with a + * voice Adapter Card (PIC) + */ +#define DLT_JUNIPER_VP 183 + +/* + * Arinc 429 frames. + * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>. + * Every frame contains a 32bit A429 label. + * More documentation on Arinc 429 can be found at + * http://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf + */ +#define DLT_A429 184 + +/* + * Arinc 653 Interpartition Communication messages. + * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>. + * Please refer to the A653-1 standard for more information. + */ +#define DLT_A653_ICM 185 + +/* + * USB packets, beginning with a USB setup header; requested by + * Paolo Abeni <paolo.abeni@email.it>. + */ +#define DLT_USB 186 + +/* + * Bluetooth HCI UART transport layer (part H:4); requested by + * Paolo Abeni. + */ +#define DLT_BLUETOOTH_HCI_H4 187 + +/* + * IEEE 802.16 MAC Common Part Sublayer; requested by Maria Cruz + * <cruz_petagay@bah.com>. + */ +#define DLT_IEEE802_16_MAC_CPS 188 + +/* + * USB packets, beginning with a Linux USB header; requested by + * Paolo Abeni <paolo.abeni@email.it>. + */ +#define DLT_USB_LINUX 189 + +/* + * Controller Area Network (CAN) v. 2.0B packets. + * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>. + * Used to dump CAN packets coming from a CAN Vector board. + * More documentation on the CAN v2.0B frames can be found at + * http://www.can-cia.org/downloads/?269 + */ +#define DLT_CAN20B 190 + +/* + * IEEE 802.15.4, with address fields padded, as is done by Linux + * drivers; requested by Juergen Schimmer. + */ +#define DLT_IEEE802_15_4_LINUX 191 + +/* + * Per Packet Information encapsulated packets. + * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>. + */ +#define DLT_PPI 192 + +/* + * Header for 802.16 MAC Common Part Sublayer plus a radiotap radio header; + * requested by Charles Clancy. + */ +#define DLT_IEEE802_16_MAC_CPS_RADIO 193 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler <hannes@juniper.net>. + * The DLT_ is used for internal communication with a + * integrated service module (ISM). + */ +#define DLT_JUNIPER_ISM 194 + +/* + * IEEE 802.15.4, exactly as it appears in the spec (no padding, no + * nothing); requested by Mikko Saarnivala <mikko.saarnivala@sensinode.com>. + */ +#define DLT_IEEE802_15_4 195 + +/* + * Various link-layer types, with a pseudo-header, for SITA + * (http://www.sita.aero/); requested by Fulko Hew (fulko.hew@gmail.com). + */ +#define DLT_SITA 196 + +/* + * Various link-layer types, with a pseudo-header, for Endace DAG cards; + * encapsulates Endace ERF records. Requested by Stephen Donnelly + * <stephen@endace.com>. + */ +#define DLT_ERF 197 + +/* + * Special header prepended to Ethernet packets when capturing from a + * u10 Networks board. Requested by Phil Mulholland + * <phil@u10networks.com>. + */ +#define DLT_RAIF1 198 + +/* + * IPMB packet for IPMI, beginning with the I2C slave address, followed + * by the netFn and LUN, etc.. Requested by Chanthy Toeung + * <chanthy.toeung@ca.kontron.com>. + */ +#define DLT_IPMB 199 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler <hannes@juniper.net>. + * The DLT_ is used for capturing data on a secure tunnel interface. + */ +#define DLT_JUNIPER_ST 200 + +/* + * Bluetooth HCI UART transport layer (part H:4), with pseudo-header + * that includes direction information; requested by Paolo Abeni. + */ +#define DLT_BLUETOOTH_HCI_H4_WITH_PHDR 201 + +/* + * AX.25 packet with a 1-byte KISS header; see + * + * http://www.ax25.net/kiss.htm + * + * as per Richard Stearn <richard@rns-stearn.demon.co.uk>. + */ +#define DLT_AX25_KISS 202 + +/* + * LAPD packets from an ISDN channel, starting with the address field, + * with no pseudo-header. + * Requested by Varuna De Silva <varunax@gmail.com>. + */ +#define DLT_LAPD 203 + +/* + * Variants of various link-layer headers, with a one-byte direction + * pseudo-header prepended - zero means "received by this host", + * non-zero (any non-zero value) means "sent by this host" - as per + * Will Barker <w.barker@zen.co.uk>. + */ +#define DLT_PPP_WITH_DIR 204 /* PPP - don't confuse with DLT_PPP_WITH_DIRECTION */ +#define DLT_C_HDLC_WITH_DIR 205 /* Cisco HDLC */ +#define DLT_FRELAY_WITH_DIR 206 /* Frame Relay */ +#define DLT_LAPB_WITH_DIR 207 /* LAPB */ + +/* + * 208 is reserved for an as-yet-unspecified proprietary link-layer + * type, as requested by Will Barker. + */ + +/* + * IPMB with a Linux-specific pseudo-header; as requested by Alexey Neyman + * <avn@pigeonpoint.com>. + */ +#define DLT_IPMB_LINUX 209 + +/* + * FlexRay automotive bus - http://www.flexray.com/ - as requested + * by Hannes Kaelber <hannes.kaelber@x2e.de>. + */ +#define DLT_FLEXRAY 210 + +/* + * Media Oriented Systems Transport (MOST) bus for multimedia + * transport - http://www.mostcooperation.com/ - as requested + * by Hannes Kaelber <hannes.kaelber@x2e.de>. + */ +#define DLT_MOST 211 + +/* + * Local Interconnect Network (LIN) bus for vehicle networks - + * http://www.lin-subbus.org/ - as requested by Hannes Kaelber + * <hannes.kaelber@x2e.de>. + */ +#define DLT_LIN 212 + +/* + * X2E-private data link type used for serial line capture, + * as requested by Hannes Kaelber <hannes.kaelber@x2e.de>. + */ +#define DLT_X2E_SERIAL 213 + +/* + * X2E-private data link type used for the Xoraya data logger + * family, as requested by Hannes Kaelber <hannes.kaelber@x2e.de>. + */ +#define DLT_X2E_XORAYA 214 + +/* + * IEEE 802.15.4, exactly as it appears in the spec (no padding, no + * nothing), but with the PHY-level data for non-ASK PHYs (4 octets + * of 0 as preamble, one octet of SFD, one octet of frame length+ + * reserved bit, and then the MAC-layer data, starting with the + * frame control field). + * + * Requested by Max Filippov <jcmvbkbc@gmail.com>. + */ +#define DLT_IEEE802_15_4_NONASK_PHY 215 + +/* + * David Gibson <david@gibson.dropbear.id.au> requested this for + * captures from the Linux kernel /dev/input/eventN devices. This + * is used to communicate keystrokes and mouse movements from the + * Linux kernel to display systems, such as Xorg. + */ +#define DLT_LINUX_EVDEV 216 + +/* + * GSM Um and Abis interfaces, preceded by a "gsmtap" header. + * + * Requested by Harald Welte <laforge@gnumonks.org>. + */ +#define DLT_GSMTAP_UM 217 +#define DLT_GSMTAP_ABIS 218 + +/* + * MPLS, with an MPLS label as the link-layer header. + * Requested by Michele Marchetto <michele@openbsd.org> on behalf + * of OpenBSD. + */ +#define DLT_MPLS 219 + +/* + * USB packets, beginning with a Linux USB header, with the USB header + * padded to 64 bytes; required for memory-mapped access. + */ +#define DLT_USB_LINUX_MMAPPED 220 + +/* + * DECT packets, with a pseudo-header; requested by + * Matthias Wenzel <tcpdump@mazzoo.de>. + */ +#define DLT_DECT 221 + +/* + * From: "Lidwa, Eric (GSFC-582.0)[SGT INC]" <eric.lidwa-1@nasa.gov> + * Date: Mon, 11 May 2009 11:18:30 -0500 + * + * DLT_AOS. We need it for AOS Space Data Link Protocol. + * I have already written dissectors for but need an OK from + * legal before I can submit a patch. + * + */ +#define DLT_AOS 222 + +/* + * Wireless HART (Highway Addressable Remote Transducer) + * From the HART Communication Foundation + * IES/PAS 62591 + * + * Requested by Sam Roberts <vieuxtech@gmail.com>. + */ +#define DLT_WIHART 223 + +/* + * Fibre Channel FC-2 frames, beginning with a Frame_Header. + * Requested by Kahou Lei <kahou82@gmail.com>. + */ +#define DLT_FC_2 224 + +/* + * Fibre Channel FC-2 frames, beginning with an encoding of the + * SOF, and ending with an encoding of the EOF. + * + * The encodings represent the frame delimiters as 4-byte sequences + * representing the corresponding ordered sets, with K28.5 + * represented as 0xBC, and the D symbols as the corresponding + * byte values; for example, SOFi2, which is K28.5 - D21.5 - D1.2 - D21.2, + * is represented as 0xBC 0xB5 0x55 0x55. + * + * Requested by Kahou Lei <kahou82@gmail.com>. + */ +#define DLT_FC_2_WITH_FRAME_DELIMS 225 + +/* + * Solaris ipnet pseudo-header; requested by Darren Reed <Darren.Reed@Sun.COM>. + * + * The pseudo-header starts with a one-byte version number; for version 2, + * the pseudo-header is: + * + * struct dl_ipnetinfo { + * u_int8_t dli_version; + * u_int8_t dli_family; + * u_int16_t dli_htype; + * u_int32_t dli_pktlen; + * u_int32_t dli_ifindex; + * u_int32_t dli_grifindex; + * u_int32_t dli_zsrc; + * u_int32_t dli_zdst; + * }; + * + * dli_version is 2 for the current version of the pseudo-header. + * + * dli_family is a Solaris address family value, so it's 2 for IPv4 + * and 26 for IPv6. + * + * dli_htype is a "hook type" - 0 for incoming packets, 1 for outgoing + * packets, and 2 for packets arriving from another zone on the same + * machine. + * + * dli_pktlen is the length of the packet data following the pseudo-header + * (so the captured length minus dli_pktlen is the length of the + * pseudo-header, assuming the entire pseudo-header was captured). + * + * dli_ifindex is the interface index of the interface on which the + * packet arrived. + * + * dli_grifindex is the group interface index number (for IPMP interfaces). + * + * dli_zsrc is the zone identifier for the source of the packet. + * + * dli_zdst is the zone identifier for the destination of the packet. + * + * A zone number of 0 is the global zone; a zone number of 0xffffffff + * means that the packet arrived from another host on the network, not + * from another zone on the same machine. + * + * An IPv4 or IPv6 datagram follows the pseudo-header; dli_family indicates + * which of those it is. + */ +#define DLT_IPNET 226 + +/* + * CAN (Controller Area Network) frames, with a pseudo-header as supplied + * by Linux SocketCAN. See Documentation/networking/can.txt in the Linux + * source. + * + * Requested by Felix Obenhuber <felix@obenhuber.de>. + */ +#define DLT_CAN_SOCKETCAN 227 + +/* + * Raw IPv4/IPv6; different from DLT_RAW in that the DLT_ value specifies + * whether it's v4 or v6. Requested by Darren Reed <Darren.Reed@Sun.COM>. + */ +#define DLT_IPV4 228 +#define DLT_IPV6 229 + +/* + * IEEE 802.15.4, exactly as it appears in the spec (no padding, no + * nothing), and with no FCS at the end of the frame; requested by + * Jon Smirl <jonsmirl@gmail.com>. + */ +#define DLT_IEEE802_15_4_NOFCS 230 + +/* + * Raw D-Bus: + * + * http://www.freedesktop.org/wiki/Software/dbus + * + * messages: + * + * http://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-messages + * + * starting with the endianness flag, followed by the message type, etc., + * but without the authentication handshake before the message sequence: + * + * http://dbus.freedesktop.org/doc/dbus-specification.html#auth-protocol + * + * Requested by Martin Vidner <martin@vidner.net>. + */ +#define DLT_DBUS 231 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler <hannes@juniper.net>. + */ +#define DLT_JUNIPER_VS 232 +#define DLT_JUNIPER_SRX_E2E 233 +#define DLT_JUNIPER_FIBRECHANNEL 234 + +/* + * DVB-CI (DVB Common Interface for communication between a PC Card + * module and a DVB receiver). See + * + * http://www.kaiser.cx/pcap-dvbci.html + * + * for the specification. + * + * Requested by Martin Kaiser <martin@kaiser.cx>. + */ +#define DLT_DVB_CI 235 + +/* + * Variant of 3GPP TS 27.010 multiplexing protocol (similar to, but + * *not* the same as, 27.010). Requested by Hans-Christoph Schemmel + * <hans-christoph.schemmel@cinterion.com>. + */ +#define DLT_MUX27010 236 + +/* + * STANAG 5066 D_PDUs. Requested by M. Baris Demiray + * <barisdemiray@gmail.com>. + */ +#define DLT_STANAG_5066_D_PDU 237 + +/* + * Juniper-private data link type, as per request from + * Hannes Gredler <hannes@juniper.net>. + */ +#define DLT_JUNIPER_ATM_CEMIC 238 + +/* + * NetFilter LOG messages + * (payload of netlink NFNL_SUBSYS_ULOG/NFULNL_MSG_PACKET packets) + * + * Requested by Jakub Zawadzki <darkjames-ws@darkjames.pl> + */ +#define DLT_NFLOG 239 + +/* + * Hilscher Gesellschaft fuer Systemautomation mbH link-layer type + * for Ethernet packets with a 4-byte pseudo-header and always + * with the payload including the FCS, as supplied by their + * netANALYZER hardware and software. + * + * Requested by Holger P. Frommer <HPfrommer@hilscher.com> + */ +#define DLT_NETANALYZER 240 + +/* + * Hilscher Gesellschaft fuer Systemautomation mbH link-layer type + * for Ethernet packets with a 4-byte pseudo-header and FCS and + * with the Ethernet header preceded by 7 bytes of preamble and + * 1 byte of SFD, as supplied by their netANALYZER hardware and + * software. + * + * Requested by Holger P. Frommer <HPfrommer@hilscher.com> + */ +#define DLT_NETANALYZER_TRANSPARENT 241 + +/* + * IP-over-Infiniband, as specified by RFC 4391. + * + * Requested by Petr Sumbera <petr.sumbera@oracle.com>. + */ +#define DLT_IPOIB 242 + +/* + * MPEG-2 transport stream (ISO 13818-1/ITU-T H.222.0). + * + * Requested by Guy Martin <gmsoft@tuxicoman.be>. + */ +#define DLT_MPEG_2_TS 243 + +/* + * ng4T GmbH's UMTS Iub/Iur-over-ATM and Iub/Iur-over-IP format as + * used by their ng40 protocol tester. + * + * Requested by Jens Grimmer <jens.grimmer@ng4t.com>. + */ +#define DLT_NG40 244 + +/* + * Pseudo-header giving adapter number and flags, followed by an NFC + * (Near-Field Communications) Logical Link Control Protocol (LLCP) PDU, + * as specified by NFC Forum Logical Link Control Protocol Technical + * Specification LLCP 1.1. + * + * Requested by Mike Wakerly <mikey@google.com>. + */ +#define DLT_NFC_LLCP 245 + + +#define DLT_MATCHING_MAX 245 /* highest value in the "matching" range */ + +/* + * The instruction encodings. + */ +/* instruction classes */ +#define BPF_CLASS(code) ((code) & 0x07) +#define BPF_LD 0x00 +#define BPF_LDX 0x01 +#define BPF_ST 0x02 +#define BPF_STX 0x03 +#define BPF_ALU 0x04 +#define BPF_JMP 0x05 +#define BPF_RET 0x06 +#define BPF_MISC 0x07 + +/* ld/ldx fields */ +#define BPF_SIZE(code) ((code) & 0x18) +#define BPF_W 0x00 +#define BPF_H 0x08 +#define BPF_B 0x10 +#define BPF_MODE(code) ((code) & 0xe0) +#define BPF_IMM 0x00 +#define BPF_ABS 0x20 +#define BPF_IND 0x40 +#define BPF_MEM 0x60 +#define BPF_LEN 0x80 +#define BPF_MSH 0xa0 + +/* alu/jmp fields */ +#define BPF_OP(code) ((code) & 0xf0) +#define BPF_ADD 0x00 +#define BPF_SUB 0x10 +#define BPF_MUL 0x20 +#define BPF_DIV 0x30 +#define BPF_OR 0x40 +#define BPF_AND 0x50 +#define BPF_LSH 0x60 +#define BPF_RSH 0x70 +#define BPF_NEG 0x80 +#define BPF_JA 0x00 +#define BPF_JEQ 0x10 +#define BPF_JGT 0x20 +#define BPF_JGE 0x30 +#define BPF_JSET 0x40 +#define BPF_SRC(code) ((code) & 0x08) +#define BPF_K 0x00 +#define BPF_X 0x08 + +/* ret - BPF_K and BPF_X also apply */ +#define BPF_RVAL(code) ((code) & 0x18) +#define BPF_A 0x10 + +/* misc */ +#define BPF_MISCOP(code) ((code) & 0xf8) +#define BPF_TAX 0x00 +#define BPF_TXA 0x80 + +/* + * The instruction data structure. + */ +struct bpf_insn { + u_short code; + u_char jt; + u_char jf; + bpf_u_int32 k; +}; + +/* + * Macros for insn array initializers. + */ +#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k } +#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k } + +#pragma pack(4) + +/* + * Structure to retrieve available DLTs for the interface. + */ +struct bpf_dltlist { + u_int32_t bfl_len; /* number of bfd_list array */ + union { + u_int32_t *bflu_list; /* array of DLTs */ + u_int64_t bflu_pad; + } bfl_u; +}; +#define bfl_list bfl_u.bflu_list + +#pragma pack() + + + +/* + * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST). + */ +#define BPF_MEMWORDS 16 + +#endif /* _NET_BPF_H_ */ |