Imported Upstream version 16.04

Change-Id: I77eadcd8538a9122e4773cbe55b24033dc451757
Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>

1 files changed, 551 insertions, 0 deletions

diff --git a/config/common_base b/config/common_base
new file mode 100644
index 00000000..0124e86c
--- /dev/null
+++ b/config/common_base
@@ -0,0 +1,551 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#
+# define executive environment
+# RTE_EXEC_ENV values are the directories in mk/exec-env/
+#
+CONFIG_RTE_EXEC_ENV=
+
+#
+# define the architecture we compile for.
+# RTE_ARCH values are the directories in mk/arch/
+#
+CONFIG_RTE_ARCH=
+
+#
+# machine can define specific variables or action for a specific board
+# RTE_MACHINE values are the directories in mk/machine/
+#
+CONFIG_RTE_MACHINE=
+
+#
+# The compiler we use.
+# RTE_TOOLCHAIN values are the directories in mk/toolchain/
+#
+CONFIG_RTE_TOOLCHAIN=
+
+#
+# Use intrinsics or assembly code for key routines
+#
+CONFIG_RTE_FORCE_INTRINSICS=n
+
+#
+# Machine forces strict alignment constraints.
+#
+CONFIG_RTE_ARCH_STRICT_ALIGN=n
+
+#
+# Compile to share library
+#
+CONFIG_RTE_BUILD_SHARED_LIB=n
+
+#
+# Use newest code breaking previous ABI
+#
+CONFIG_RTE_NEXT_ABI=y
+
+#
+# Machine's cache line size
+#
+CONFIG_RTE_CACHE_LINE_SIZE=64
+
+#
+# Compile Environment Abstraction Layer
+#
+CONFIG_RTE_LIBRTE_EAL=y
+CONFIG_RTE_MAX_LCORE=128
+CONFIG_RTE_MAX_NUMA_NODES=8
+CONFIG_RTE_MAX_MEMSEG=256
+CONFIG_RTE_MAX_MEMZONE=2560
+CONFIG_RTE_MAX_TAILQ=32
+CONFIG_RTE_LOG_LEVEL=8
+CONFIG_RTE_LOG_HISTORY=256
+CONFIG_RTE_LIBEAL_USE_HPET=n
+CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
+CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
+CONFIG_RTE_EAL_IGB_UIO=n
+CONFIG_RTE_EAL_VFIO=n
+CONFIG_RTE_MALLOC_DEBUG=n
+
+# Default driver path (or "" to disable)
+CONFIG_RTE_EAL_PMD_PATH=""
+
+#
+# Special configurations in PCI Config Space for high performance
+# They are all deprecated, and will be removed later.
+#
+CONFIG_RTE_PCI_CONFIG=n
+CONFIG_RTE_PCI_EXTENDED_TAG=""
+CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0
+
+#
+# Compile Environment Abstraction Layer to support Vmware TSC map
+#
+CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
+
+#
+# Compile the argument parser library
+#
+CONFIG_RTE_LIBRTE_KVARGS=y
+
+#
+# Compile generic ethernet library
+#
+CONFIG_RTE_LIBRTE_ETHER=y
+CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
+CONFIG_RTE_MAX_ETHPORTS=32
+CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
+CONFIG_RTE_LIBRTE_IEEE1588=n
+CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
+CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
+
+#
+# Support NIC bypass logic
+#
+CONFIG_RTE_NIC_BYPASS=n
+
+#
+# Compile burst-oriented Amazon ENA PMD driver
+#
+CONFIG_RTE_LIBRTE_ENA_PMD=y
+CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_ENA_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
+
+#
+# Compile burst-oriented IGB & EM PMD drivers
+#
+CONFIG_RTE_LIBRTE_EM_PMD=y
+CONFIG_RTE_LIBRTE_IGB_PMD=y
+CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
+
+#
+# Compile burst-oriented IXGBE PMD driver
+#
+CONFIG_RTE_LIBRTE_IXGBE_PMD=y
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
+CONFIG_RTE_IXGBE_INC_VECTOR=y
+CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
+
+#
+# Compile burst-oriented I40E PMD driver
+#
+CONFIG_RTE_LIBRTE_I40E_PMD=y
+CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
+CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
+CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
+CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
+CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
+CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
+CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
+# interval up to 8160 us, aligned to 2 (or default value)
+CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
+
+#
+# Compile burst-oriented FM10K PMD
+#
+CONFIG_RTE_LIBRTE_FM10K_PMD=y
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
+CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
+
+#
+# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
+#
+CONFIG_RTE_LIBRTE_MLX4_PMD=n
+CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
+CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
+CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
+CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
+
+#
+# Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
+#
+CONFIG_RTE_LIBRTE_MLX5_PMD=n
+CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
+CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
+CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
+
+#
+# Compile burst-oriented Broadcom PMD driver
+#
+CONFIG_RTE_LIBRTE_BNX2X_PMD=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
+
+#
+# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
+#
+CONFIG_RTE_LIBRTE_CXGBE_PMD=y
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
+
+#
+# Compile burst-oriented Cisco ENIC PMD driver
+#
+CONFIG_RTE_LIBRTE_ENIC_PMD=y
+CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
+
+#
+# Compile burst-oriented Netronome NFP PMD driver
+#
+CONFIG_RTE_LIBRTE_NFP_PMD=n
+CONFIG_RTE_LIBRTE_NFP_DEBUG=n
+
+#
+# Compile software PMD backed by SZEDATA2 device
+#
+CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
+#
+# Defines firmware type address space.
+# RTE_LIBRTE_PMD_SZEDATA2_AS can be:
+# 0 - for firmwares:
+#         NIC_100G1_LR4
+#         HANIC_100G1_LR4
+#         HANIC_100G1_SR10
+# Other values raise compile time error
+CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
+
+#
+# Compile burst-oriented VIRTIO PMD driver
+#
+CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
+
+#
+# Compile burst-oriented VMXNET3 PMD driver
+#
+CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
+
+#
+# Compile example software rings based PMD
+#
+CONFIG_RTE_LIBRTE_PMD_RING=y
+CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
+CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
+
+#
+# Compile software PMD backed by PCAP files
+#
+CONFIG_RTE_LIBRTE_PMD_PCAP=n
+
+#
+# Compile link bonding PMD library
+#
+CONFIG_RTE_LIBRTE_PMD_BOND=y
+CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
+CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
+
+#
+# Compile software PMD backed by AF_PACKET sockets (Linux only)
+#
+CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
+
+#
+# Compile Xen PMD
+#
+CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
+
+#
+# Compile null PMD
+#
+CONFIG_RTE_LIBRTE_PMD_NULL=y
+
+#
+# Do prefetch of packet data within PMD driver receive function
+#
+CONFIG_RTE_PMD_PACKET_PREFETCH=y
+
+#
+# Compile generic crypto device library
+#
+CONFIG_RTE_LIBRTE_CRYPTODEV=y
+CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
+CONFIG_RTE_CRYPTO_MAX_DEVS=64
+CONFIG_RTE_CRYPTODEV_NAME_LEN=64
+
+#
+# Compile PMD for QuickAssist based devices
+#
+CONFIG_RTE_LIBRTE_PMD_QAT=n
+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
+#
+# Number of sessions to create in the session memory pool
+# on a single QuickAssist device.
+#
+CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
+
+#
+# Compile PMD for AESNI backed device
+#
+CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
+CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
+
+#
+# Compile PMD for AESNI GCM device
+#
+CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
+CONFIG_RTE_LIBRTE_PMD_AESNI_GCM_DEBUG=n
+
+#
+# Compile PMD for SNOW 3G device
+#
+CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
+CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
+
+#
+# Compile PMD for NULL Crypto device
+#
+CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
+
+#
+# Compile librte_ring
+#
+CONFIG_RTE_LIBRTE_RING=y
+CONFIG_RTE_LIBRTE_RING_DEBUG=n
+CONFIG_RTE_RING_SPLIT_PROD_CONS=n
+CONFIG_RTE_RING_PAUSE_REP_COUNT=0
+
+#
+# Compile librte_mempool
+#
+CONFIG_RTE_LIBRTE_MEMPOOL=y
+CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
+CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
+
+#
+# Compile librte_mbuf
+#
+CONFIG_RTE_LIBRTE_MBUF=y
+CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
+CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
+CONFIG_RTE_PKTMBUF_HEADROOM=128
+
+#
+# Compile librte_timer
+#
+CONFIG_RTE_LIBRTE_TIMER=y
+CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
+
+#
+# Compile librte_cfgfile
+#
+CONFIG_RTE_LIBRTE_CFGFILE=y
+
+#
+# Compile librte_cmdline
+#
+CONFIG_RTE_LIBRTE_CMDLINE=y
+CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
+
+#
+# Compile librte_hash
+#
+CONFIG_RTE_LIBRTE_HASH=y
+CONFIG_RTE_LIBRTE_HASH_DEBUG=n
+
+#
+# Compile librte_jobstats
+#
+CONFIG_RTE_LIBRTE_JOBSTATS=y
+
+#
+# Compile librte_lpm
+#
+CONFIG_RTE_LIBRTE_LPM=y
+CONFIG_RTE_LIBRTE_LPM_DEBUG=n
+
+#
+# Compile librte_acl
+#
+CONFIG_RTE_LIBRTE_ACL=y
+CONFIG_RTE_LIBRTE_ACL_DEBUG=n
+
+#
+# Compile librte_power
+#
+CONFIG_RTE_LIBRTE_POWER=n
+CONFIG_RTE_LIBRTE_POWER_DEBUG=n
+CONFIG_RTE_MAX_LCORE_FREQS=64
+
+#
+# Compile librte_net
+#
+CONFIG_RTE_LIBRTE_NET=y
+
+#
+# Compile librte_ip_frag
+#
+CONFIG_RTE_LIBRTE_IP_FRAG=y
+CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
+CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
+CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
+
+#
+# Compile librte_meter
+#
+CONFIG_RTE_LIBRTE_METER=y
+
+#
+# Compile librte_sched
+#
+CONFIG_RTE_LIBRTE_SCHED=y
+CONFIG_RTE_SCHED_DEBUG=n
+CONFIG_RTE_SCHED_RED=n
+CONFIG_RTE_SCHED_COLLECT_STATS=n
+CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
+CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
+CONFIG_RTE_SCHED_VECTOR=n
+
+#
+# Compile the distributor library
+#
+CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
+
+#
+# Compile the reorder library
+#
+CONFIG_RTE_LIBRTE_REORDER=y
+
+#
+# Compile librte_port
+#
+CONFIG_RTE_LIBRTE_PORT=y
+CONFIG_RTE_PORT_STATS_COLLECT=n
+CONFIG_RTE_PORT_PCAP=n
+
+#
+# Compile librte_table
+#
+CONFIG_RTE_LIBRTE_TABLE=y
+CONFIG_RTE_TABLE_STATS_COLLECT=n
+
+#
+# Compile librte_pipeline
+#
+CONFIG_RTE_LIBRTE_PIPELINE=y
+CONFIG_RTE_PIPELINE_STATS_COLLECT=n
+
+#
+# Compile librte_kni
+#
+CONFIG_RTE_LIBRTE_KNI=n
+CONFIG_RTE_KNI_KMOD=n
+CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
+CONFIG_RTE_KNI_KO_DEBUG=n
+CONFIG_RTE_KNI_VHOST=n
+CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
+CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
+CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
+CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
+
+#
+# Compile vhost library
+# fuse-devel is needed to run vhost-cuse.
+# fuse-devel enables user space char driver development
+# vhost-user is turned on by default.
+#
+CONFIG_RTE_LIBRTE_VHOST=n
+CONFIG_RTE_LIBRTE_VHOST_USER=y
+CONFIG_RTE_LIBRTE_VHOST_NUMA=n
+CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
+
+#
+# Compile vhost PMD
+# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
+#
+CONFIG_RTE_LIBRTE_PMD_VHOST=n
+
+#
+#Compile Xen domain0 support
+#
+CONFIG_RTE_LIBRTE_XEN_DOM0=n
+
+#
+# Enable warning directives
+#
+CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
+
+#
+# Compile the test application
+#
+CONFIG_RTE_APP_TEST=y
+
+#
+# Compile the PMD test application
+#
+CONFIG_RTE_TEST_PMD=y
+CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
+CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n