New upstream version 18.02upstream/18.02

Change-Id: I89ed24cb2a49b78fe5be6970b99dd46c1499fcc3
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>

1 files changed, 147 insertions, 0 deletions

diff --git a/doc/guides/bbdevs/turbo_sw.rst b/doc/guides/bbdevs/turbo_sw.rst
new file mode 100644
index 00000000..b3fed163
--- /dev/null
+++ b/doc/guides/bbdevs/turbo_sw.rst
@@ -0,0 +1,147 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2017 Intel Corporation
+
+SW Turbo Poll Mode Driver
+=========================
+
+The SW Turbo PMD (**turbo_sw**) provides a poll mode bbdev driver that utilizes
+Intel optimized libraries for LTE Layer 1 workloads acceleration. This PMD
+supports the functions: Turbo FEC, Rate Matching and CRC functions.
+
+Features
+--------
+
+SW Turbo PMD has support for the following capabilities:
+
+For the encode operation:
+
+* ``RTE_BBDEV_TURBO_CRC_24A_ATTACH``
+* ``RTE_BBDEV_TURBO_CRC_24B_ATTACH``
+* ``RTE_BBDEV_TURBO_RATE_MATCH``
+* ``RTE_BBDEV_TURBO_RV_INDEX_BYPASS``
+
+For the decode operation:
+
+* ``RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE``
+* ``RTE_BBDEV_TURBO_CRC_TYPE_24B``
+* ``RTE_BBDEV_TURBO_POS_LLR_1_BIT_IN``
+* ``RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN``
+
+
+Limitations
+-----------
+
+* In-place operations for Turbo encode and decode are not supported
+
+Installation
+------------
+
+FlexRAN SDK Download
+~~~~~~~~~~~~~~~~~~~~
+
+To build DPDK with the *turbo_sw* PMD the user is required to download
+the export controlled ``FlexRAN SDK`` Libraries. An account at Intel Resource
+Design Center needs to be registered from
+`<https://www.intel.com/content/www/us/en/design/resource-design-center.html>`_.
+
+Once registered, the user needs to log in, and look for
+*Intel SWA_SW_FlexRAN_Release_Package R1_3_0* and click for download. Or use
+this direct download link `<https://cdrd.intel.com/v1/dl/getContent/575367>`_.
+
+After download is complete, the user needs to unpack and compile on their
+system before building DPDK.
+
+FlexRAN SDK Installation
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+The following are pre-requisites for building FlexRAN SDK Libraries:
+ (a) An AVX2 supporting machine
+ (b) Windriver TS 2 or CentOS 7 operating systems
+ (c) Intel ICC compiler installed
+
+The following instructions should be followed in this exact order:
+
+#. Set the environment variables:
+
+    .. code-block:: console
+
+        source <path-to-icc-compiler-install-folder>/linux/bin/compilervars.sh intel64 -platform linux
+
+
+#. Extract the ``FlexRAN-1.3.0.tar.gz.zip`` package, then run the SDK extractor
+   script and accept the license:
+
+    .. code-block:: console
+
+        cd <path-to-workspace>/FlexRAN-1.3.0/
+        ./SDK-R1.3.0.sh
+
+#. To allow ``FlexRAN SDK R1.3.0`` to work with bbdev properly, the following
+   hotfix is required. Change the return of function ``rate_matching_turbo_lte_avx2()``
+   located in file
+   ``<path-to-workspace>/FlexRAN-1.3.0/SDK-R1.3.0/sdk/source/phy/lib_rate_matching/phy_rate_match_avx2.cpp``
+   to return 0 instead of 1.
+
+    .. code-block:: c
+
+        -  return 1;
+        +  return 0;
+
+#. Generate makefiles based on system configuration:
+
+    .. code-block:: console
+
+        cd <path-to-workspace>/FlexRAN-1.3.0/SDK-R1.3.0/sdk/
+        ./create-makefiles-linux.sh
+
+#. A build folder is generated in this form ``build-<ISA>-<CC>``, enter that
+   folder and install:
+
+    .. code-block:: console
+
+        cd build-avx2-icc/
+        make install
+
+
+Initialization
+--------------
+
+In order to enable this virtual bbdev PMD, the user must:
+
+* Build the ``FLEXRAN SDK`` libraries (explained in Installation section).
+
+* Export the environmental variables ``FLEXRAN_SDK`` to the path where the
+  FlexRAN SDK libraries were installed. And ``DIR_WIRELESS_SDK`` to the path
+  where the libraries were extracted.
+
+Example:
+
+.. code-block:: console
+
+    export FLEXRAN_SDK=<path-to-workspace>/FlexRAN-1.3.0/SDK-R1.3.0/sdk/build-avx2-icc/install
+    export DIR_WIRELESS_SDK=<path-to-workspace>/FlexRAN-1.3.0/SDK-R1.3.0/sdk/
+
+
+* Set ``CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y`` in DPDK common configuration
+  file ``config/common_base``.
+
+To use the PMD in an application, user must:
+
+- Call ``rte_vdev_init("turbo_sw")`` within the application.
+
+- Use ``--vdev="turbo_sw"`` in the EAL options, which will call ``rte_vdev_init()`` internally.
+
+The following parameters (all optional) can be provided in the previous two calls:
+
+* ``socket_id``: Specify the socket where the memory for the device is going to be allocated
+  (by default, *socket_id* will be the socket where the core that is creating the PMD is running on).
+
+* ``max_nb_queues``: Specify the maximum number of queues in the device (default is ``RTE_MAX_LCORE``).
+
+Example:
+~~~~~~~~
+
+.. code-block:: console
+
+    ./test-bbdev.py -e="--vdev=turbo_sw,socket_id=0,max_nb_queues=8" \
+    -c validation -v ./test_vectors/bbdev_vector_t?_default.data