diff options
author | 2016-07-25 13:22:22 -0300 | |
---|---|---|
committer | 2016-07-25 13:26:13 -0300 | |
commit | 5b1ff351aa2d38446487eed6ccd7ace1b654bbe6 (patch) | |
tree | 383fc0fb3c0906113cdbdc0268a32479ed8fa038 /doc/guides/howto/lm_virtio_vhost_user.rst | |
parent | fe9e0a156b8ec361b633b4d20d2231113f28fa63 (diff) |
Imported Upstream version 16.07-rc4
Change-Id: Ic57f6a3726f2dbd1682223648d91310f45705327
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Diffstat (limited to 'doc/guides/howto/lm_virtio_vhost_user.rst')
-rw-r--r-- | doc/guides/howto/lm_virtio_vhost_user.rst | 469 |
1 files changed, 469 insertions, 0 deletions
diff --git a/doc/guides/howto/lm_virtio_vhost_user.rst b/doc/guides/howto/lm_virtio_vhost_user.rst new file mode 100644 index 00000000..fad1f2a8 --- /dev/null +++ b/doc/guides/howto/lm_virtio_vhost_user.rst @@ -0,0 +1,469 @@ +.. BSD LICENSE + Copyright(c) 2016 Intel Corporation. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +Live Migration of VM with Virtio on host running vhost_user +=========================================================== + +Overview +-------- + +Live Migration of a VM with DPDK Virtio PMD on a host which is +running the Vhost sample application (vhost-switch) and using the DPDK PMD (ixgbe or i40e). + +The Vhost sample application uses VMDQ so SRIOV must be disabled on the NIC's. + +The following sections show an example of how to do this migration. + +Test Setup +---------- + +To test the Live Migration two servers with identical operating systems installed are used. +KVM and QEMU is also required on the servers. + +QEMU 2.5 is required for Live Migration of a VM with vhost_user running on the hosts. + +In this example, the servers have Niantic and or Fortville NIC's installed. +The NIC's on both servers are connected to a switch +which is also connected to the traffic generator. + +The switch is configured to broadcast traffic on all the NIC ports. + +The ip address of host_server_1 is 10.237.212.46 + +The ip address of host_server_2 is 10.237.212.131 + +.. _figure_lm_vhost_user: + +.. figure:: img/lm_vhost_user.* + +Live Migration steps +-------------------- + +The sample scripts mentioned in the steps below can be found in the +:ref:`Sample host scripts <lm_virtio_vhost_user_host_scripts>` and +:ref:`Sample VM scripts <lm_virtio_vhost_user_vm_scripts>` sections. + +On host_server_1: Terminal 1 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Setup DPDK on host_server_1 + +.. code-block:: console + + cd /root/dpdk/host_scripts + ./setup_dpdk_on_host.sh + +On host_server_1: Terminal 2 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Bind the Niantic or Fortville NIC to igb_uio on host_server_1. + +For Fortville NIC. + +.. code-block:: console + + cd /root/dpdk/tools + ./dpdk_nic_bind.py -b igb_uio 0000:02:00.0 + +For Niantic NIC. + +.. code-block:: console + + cd /root/dpdk/tools + ./dpdk_nic_bind.py -b igb_uio 0000:09:00.0 + +On host_server_1: Terminal 3 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +For Fortville and Niantic NIC's reset SRIOV and run the +vhost_user sample application (vhost-switch) on host_server_1. + +.. code-block:: console + + cd /root/dpdk/host_scripts + ./reset_vf_on_212_46.sh + ./run_vhost_switch_on_host.sh + +On host_server_1: Terminal 1 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Start the VM on host_server_1 + +.. code-block:: console + + ./vm_virtio_vhost_user.sh + +On host_server_1: Terminal 4 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Connect to the QEMU monitor on host_server_1. + +.. code-block:: console + + cd /root/dpdk/host_scripts + ./connect_to_qemu_mon_on_host.sh + (qemu) + +On host_server_1: Terminal 1 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +**In VM on host_server_1:** + +Setup DPDK in the VM and run testpmd in the VM. + +.. code-block:: console + + cd /root/dpdk/vm_scripts + ./setup_dpdk_in_vm.sh + ./run_testpmd_in_vm.sh + + testpmd> show port info all + testpmd> set fwd mac retry + testpmd> start tx_first + testpmd> show port stats all + +Virtio traffic is seen at P1 and P2. + +On host_server_2: Terminal 1 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Set up DPDK on the host_server_2. + +.. code-block:: console + + cd /root/dpdk/host_scripts + ./setup_dpdk_on_host.sh + +On host_server_2: Terminal 2 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Bind the Niantic or Fortville NIC to igb_uio on host_server_2. + +For Fortville NIC. + +.. code-block:: console + + cd /root/dpdk/tools + ./dpdk_nic_bind.py -b igb_uio 0000:03:00.0 + +For Niantic NIC. + +.. code-block:: console + + cd /root/dpdk/tools + ./dpdk_nic_bind.py -b igb_uio 0000:06:00.0 + +On host_server_2: Terminal 3 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +For Fortville and Niantic NIC's reset SRIOV, and run +the vhost_user sample application on host_server_2. + +.. code-block:: console + + cd /root/dpdk/host_scripts + ./reset_vf_on_212_131.sh + ./run_vhost_switch_on_host.sh + +On host_server_2: Terminal 1 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Start the VM on host_server_2. + +.. code-block:: console + + ./vm_virtio_vhost_user_migrate.sh + +On host_server_2: Terminal 4 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Connect to the QEMU monitor on host_server_2. + +.. code-block:: console + + cd /root/dpdk/host_scripts + ./connect_to_qemu_mon_on_host.sh + (qemu) info status + VM status: paused (inmigrate) + (qemu) + +On host_server_1: Terminal 4 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Check that switch is up before migrating the VM. + +.. code-block:: console + + (qemu) migrate tcp:10.237.212.131:5555 + (qemu) info status + VM status: paused (postmigrate) + + (qemu) info migrate + capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off + Migration status: completed + total time: 11619 milliseconds + downtime: 5 milliseconds + setup: 7 milliseconds + transferred ram: 379699 kbytes + throughput: 267.82 mbps + remaining ram: 0 kbytes + total ram: 1590088 kbytes + duplicate: 303985 pages + skipped: 0 pages + normal: 94073 pages + normal bytes: 376292 kbytes + dirty sync count: 2 + (qemu) quit + +On host_server_2: Terminal 1 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +**In VM on host_server_2:** + + Hit Enter key. This brings the user to the testpmd prompt. + +.. code-block:: console + + testpmd> + +On host_server_2: Terminal 4 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +**In QEMU monitor on host_server_2** + +.. code-block:: console + + (qemu) info status + VM status: running + +On host_server_2: Terminal 1 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +**In VM on host_server_2:** + +.. code-block:: console + + testomd> show port info all + testpmd> show port stats all + +Virtio traffic is seen at P0 and P1. + + +.. _lm_virtio_vhost_user_host_scripts: + +Sample host scripts +------------------- + +reset_vf_on_212_46.sh +~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: sh + + #!/bin/sh + # This script is run on the host 10.237.212.46 to reset SRIOV + + # BDF for Fortville NIC is 0000:02:00.0 + cat /sys/bus/pci/devices/0000\:02\:00.0/max_vfs + echo 0 > /sys/bus/pci/devices/0000\:02\:00.0/max_vfs + cat /sys/bus/pci/devices/0000\:02\:00.0/max_vfs + + # BDF for Niantic NIC is 0000:09:00.0 + cat /sys/bus/pci/devices/0000\:09\:00.0/max_vfs + echo 0 > /sys/bus/pci/devices/0000\:09\:00.0/max_vfs + cat /sys/bus/pci/devices/0000\:09\:00.0/max_vfs + +vm_virtio_vhost_user.sh +~~~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: sh + + #/bin/sh + # Script for use with vhost_user sample application + # The host system has 8 cpu's (0-7) + + # Path to KVM tool + KVM_PATH="/usr/bin/qemu-system-x86_64" + + # Guest Disk image + DISK_IMG="/home/user/disk_image/virt1_sml.disk" + + # Number of guest cpus + VCPUS_NR="6" + + # Memory + MEM=1024 + + VIRTIO_OPTIONS="csum=off,gso=off,guest_tso4=off,guest_tso6=off,guest_ecn=off" + + # Socket Path + SOCKET_PATH="/root/dpdk/host_scripts/usvhost" + + taskset -c 2-7 $KVM_PATH \ + -enable-kvm \ + -m $MEM \ + -smp $VCPUS_NR \ + -object memory-backend-file,id=mem,size=1024M,mem-path=/mnt/huge,share=on \ + -numa node,memdev=mem,nodeid=0 \ + -cpu host \ + -name VM1 \ + -no-reboot \ + -net none \ + -vnc none \ + -nographic \ + -hda $DISK_IMG \ + -chardev socket,id=chr0,path=$SOCKET_PATH \ + -netdev type=vhost-user,id=net1,chardev=chr0,vhostforce \ + -device virtio-net-pci,netdev=net1,mac=CC:BB:BB:BB:BB:BB,$VIRTIO_OPTIONS \ + -chardev socket,id=chr1,path=$SOCKET_PATH \ + -netdev type=vhost-user,id=net2,chardev=chr1,vhostforce \ + -device virtio-net-pci,netdev=net2,mac=DD:BB:BB:BB:BB:BB,$VIRTIO_OPTIONS \ + -monitor telnet::3333,server,nowait + +connect_to_qemu_mon_on_host.sh +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: sh + + #!/bin/sh + # This script is run on both hosts when the VM is up, + # to connect to the Qemu Monitor. + + telnet 0 3333 + +reset_vf_on_212_131.sh +~~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: sh + + #!/bin/sh + # This script is run on the host 10.237.212.131 to reset SRIOV + + # BDF for Ninatic NIC is 0000:06:00.0 + cat /sys/bus/pci/devices/0000\:06\:00.0/max_vfs + echo 0 > /sys/bus/pci/devices/0000\:06\:00.0/max_vfs + cat /sys/bus/pci/devices/0000\:06\:00.0/max_vfs + + # BDF for Fortville NIC is 0000:03:00.0 + cat /sys/bus/pci/devices/0000\:03\:00.0/max_vfs + echo 0 > /sys/bus/pci/devices/0000\:03\:00.0/max_vfs + cat /sys/bus/pci/devices/0000\:03\:00.0/max_vfs + +vm_virtio_vhost_user_migrate.sh +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: sh + + #/bin/sh + # Script for use with vhost user sample application + # The host system has 8 cpu's (0-7) + + # Path to KVM tool + KVM_PATH="/usr/bin/qemu-system-x86_64" + + # Guest Disk image + DISK_IMG="/home/user/disk_image/virt1_sml.disk" + + # Number of guest cpus + VCPUS_NR="6" + + # Memory + MEM=1024 + + VIRTIO_OPTIONS="csum=off,gso=off,guest_tso4=off,guest_tso6=off,guest_ecn=off" + + # Socket Path + SOCKET_PATH="/root/dpdk/host_scripts/usvhost" + + taskset -c 2-7 $KVM_PATH \ + -enable-kvm \ + -m $MEM \ + -smp $VCPUS_NR \ + -object memory-backend-file,id=mem,size=1024M,mem-path=/mnt/huge,share=on \ + -numa node,memdev=mem,nodeid=0 \ + -cpu host \ + -name VM1 \ + -no-reboot \ + -net none \ + -vnc none \ + -nographic \ + -hda $DISK_IMG \ + -chardev socket,id=chr0,path=$SOCKET_PATH \ + -netdev type=vhost-user,id=net1,chardev=chr0,vhostforce \ + -device virtio-net-pci,netdev=net1,mac=CC:BB:BB:BB:BB:BB,$VIRTIO_OPTIONS \ + -chardev socket,id=chr1,path=$SOCKET_PATH \ + -netdev type=vhost-user,id=net2,chardev=chr1,vhostforce \ + -device virtio-net-pci,netdev=net2,mac=DD:BB:BB:BB:BB:BB,$VIRTIO_OPTIONS \ + -incoming tcp:0:5555 \ + -monitor telnet::3333,server,nowait + +.. _lm_virtio_vhost_user_vm_scripts: + +Sample VM scripts +----------------- + +setup_dpdk_virtio_in_vm.sh +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: sh + + #!/bin/sh + # this script matches the vm_virtio_vhost_user script + # virtio port is 03 + # virtio port is 04 + + cat /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages + echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages + cat /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages + + ifconfig -a + /root/dpdk/tools/dpdk_nic_bind.py --status + + rmmod virtio-pci + + modprobe uio + insmod /root/dpdk/x86_64-default-linuxapp-gcc/kmod/igb_uio.ko + + /root/dpdk/tools/dpdk_nic_bind.py -b igb_uio 0000:00:03.0 + /root/dpdk/tools/dpdk_nic_bind.py -b igb_uio 0000:00:04.0 + + /root/dpdk/tools/dpdk_nic_bind.py --status + +run_testpmd_in_vm.sh +~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: sh + + #!/bin/sh + # Run testpmd for use with vhost_user sample app. + # test system has 8 cpus (0-7), use cpus 2-7 for VM + + /root/dpdk/x86_64-default-linuxapp-gcc/app/testpmd \ + -c 3f -n 4 --socket-mem 350 -- --burst=64 --i --disable-hw-vlan-filter |