summaryrefslogtreecommitdiffstats
path: root/doc/guides/howto
diff options
context:
space:
mode:
authorLuca Boccassi <luca.boccassi@gmail.com>2017-11-08 14:15:11 +0000
committerLuca Boccassi <luca.boccassi@gmail.com>2017-11-08 14:45:54 +0000
commit055c52583a2794da8ba1e85a48cce3832372b12f (patch)
tree8ceb1cb78fbb46a0f341f8ee24feb3c6b5540013 /doc/guides/howto
parentf239aed5e674965691846e8ce3f187dd47523689 (diff)
New upstream version 17.11-rc3
Change-Id: I6a5baa40612fe0c20f30b5fa773a6cbbac63a685 Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Diffstat (limited to 'doc/guides/howto')
-rw-r--r--doc/guides/howto/index.rst1
-rw-r--r--doc/guides/howto/rte_flow.rst333
2 files changed, 334 insertions, 0 deletions
diff --git a/doc/guides/howto/index.rst b/doc/guides/howto/index.rst
index 468939b6..b5e8ac68 100644
--- a/doc/guides/howto/index.rst
+++ b/doc/guides/howto/index.rst
@@ -38,6 +38,7 @@ HowTo Guides
lm_bond_virtio_sriov
lm_virtio_vhost_user
flow_bifurcation
+ rte_flow
pvp_reference_benchmark
vfd
virtio_user_for_container_networking
diff --git a/doc/guides/howto/rte_flow.rst b/doc/guides/howto/rte_flow.rst
new file mode 100644
index 00000000..4a27c995
--- /dev/null
+++ b/doc/guides/howto/rte_flow.rst
@@ -0,0 +1,333 @@
+.. BSD LICENSE
+ Copyright(c) 2017 Mellanox Corporation. All rights reserved.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Mellanox Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+Generic flow API - examples
+===========================
+
+This document demonstrates some concrete examples for programming flow rules
+with the ``rte_flow`` APIs.
+
+* Detail of the rte_flow APIs can be found in the following link:
+ :ref:`Generic flow API <Generic_flow_API>` .
+
+* Details of the TestPMD commands to set the flow rules can be found in the
+ following link: :ref:`TestPMD Flow rules <testpmd_rte_flow>`
+
+Simple IPv4 drop
+----------------
+
+Description
+~~~~~~~~~~~
+
+In this example we will create a simple rule that drops packets whose IPv4
+destination equals 192.168.3.2. This code is equivalent to the following
+testpmd command (wrapped for clarity)::
+
+ tpmd> flow create 0 ingress pattern eth / vlan /
+ ipv4 dst is 192.168.3.2 / end actions drop / end
+
+Code
+~~~~
+
+.. code-block:: c
+
+ /* create the attribute structure */
+ struct rte_flow_attr attr = {.ingress = 1};
+ struct rte_flow_item pattern[MAX_PATTERN_IN_FLOW];
+ struct rte_flow_action actions[MAX_ACTIONS_IN_FLOW];
+ struct rte_flow_item_etc eth;
+ struct rte_flow_item_vlan vlan;
+ struct rte_flow_item_ipv4 ipv4;
+ struct rte_flow *flow;
+ struct rte_flow_error error;
+
+ /* setting the eth to pass all packets */
+ pattern[0].type = RTE_FLOW_ITEM_TYPE_ETH;
+ pattern[0].spec = &eth;
+
+ /* set the vlan to pas all packets */
+ pattern[1] = RTE_FLOW_ITEM_TYPE_VLAN;
+ pattern[1].spec = &vlan;
+
+ /* set the dst ipv4 packet to the required value */
+ ipv4.hdr.dst_addr = htonl(0xc0a80302);
+ pattern[2].type = RTE_FLOW_ITEM_TYPE_IPV4;
+ pattern[2].spec = &ipv4;
+
+ /* end the pattern array */
+ pattern[3].type = RTE_FLOW_ITEM)TYPE_END;
+
+ /* create the drop action */
+ actions[0].type = RTE_FLOW_ACTION_TYPE_DROP;
+ actions[1].type = RTE_FLOW_ACTION_TYPE_END;
+
+ /* validate and create the flow rule */
+ if (!rte_flow_validate(port_id, &attr, pattern, actions, &error)
+ flow = rte_flow_create(port_id, &attr, pattern, actions, &error)
+
+Output
+~~~~~~
+
+Terminal 1: running sample app with the flow rule disabled::
+
+ ./filter-program disable
+ [waiting for packets]
+
+Terminal 2: running scapy::
+
+ $scapy
+ welcome to Scapy
+ >> sendp(Ether()/Dot1Q()/IP(src='176.80.50.4', dst='192.168.3.1'), \
+ iface='some interface', count=1)
+ >> sendp(Ether()/Dot1Q()/IP(src='176.80.50.5', dst='192.168.3.2'), \
+ iface='some interface', count=1)
+
+Terminal 1: output log::
+
+ received packet with src ip = 176.80.50.4
+ received packet with src ip = 176.80.50.5
+
+Terminal 1: running sample the app flow rule enabled::
+
+ ./filter-program enabled
+ [waiting for packets]
+
+Terminal 2: running scapy::
+
+ $scapy
+ welcome to Scapy
+ >> sendp(Ether()/Dot1Q()/IP(src='176.80.50.4', dst='192.168.3.1'), \
+ iface='some interface', count=1)
+ >> sendp(Ether()/Dot1Q()/IP(src='176.80.50.5', dst ='192.168.3.2'), \
+ iface='some interface', count=1)
+
+Terminal 1: output log::
+
+ received packet with src ip = 176.80.50.4
+
+Range IPv4 drop
+----------------
+
+Description
+~~~~~~~~~~~
+
+In this example we will create a simple rule that drops packets whose IPv4
+destination is in the range 192.168.3.0 to 192.168.3.255. This is done using
+a mask.
+
+This code is equivalent to the following testpmd command (wrapped for
+clarity)::
+
+ tpmd> flow create 0 ingress pattern eth / vlan /
+ ipv4 dst spec 192.168.3.0 dst mask 255.255.255.0 /
+ end actions drop / end
+
+Code
+~~~~
+
+.. code-block:: c
+
+ struct rte_flow_attr attr = {.ingress = 1};
+ struct rte_flow_item pattern[MAX_PATTERN_IN_FLOW];
+ struct rte_flow_action actions[MAX_ACTIONS_IN_FLOW];
+ struct rte_flow_item_etc eth;
+ struct rte_flow_item_vlan vlan;
+ struct rte_flow_item_ipv4 ipv4;
+ struct rte_flow_item_ipv4 ipv4_mask;
+ struct rte_flow *flow;
+ struct rte_flow_error error;
+
+ /* setting the eth to pass all packets */
+ pattern[0].type = RTE_FLOW_ITEM_TYPE_ETH;
+ pattern[0].spec = &eth;
+
+ /* set the vlan to pas all packets */
+ pattern[1] = RTE_FLOW_ITEM_TYPE_VLAN;
+ pattern[1].spec = &vlan;
+
+ /* set the dst ipv4 packet to the required value */
+ ipv4.hdr.dst_addr = htonl(0xc0a80300);
+ ipv4_mask.hdr.dst_addr = htonl(0xffffff00);
+ pattern[2].type = RTE_FLOW_ITEM_TYPE_IPV4;
+ pattern[2].spec = &ipv4;
+ pattern[2].mask = &ipv4_mask;
+
+ /* end the pattern array */
+ pattern[3].type = RTE_FLOW_ITEM)TYPE_END;
+
+ /* create the drop action */
+ actions[0].type = RTE_FLOW_ACTION_TYPE_DROP;
+ actions[1].type = RTE_FLOW_ACTION_TYPE_END;
+
+ /* validate and create the flow rule */
+ if (!rte_flow_validate(port_id, &attr, pattern, actions, &error)
+ flow = rte_flow_create(port_id, &attr, pattern, actions, &error)
+
+Output
+~~~~~~
+
+Terminal 1: running sample app flow rule disabled::
+
+ ./filter-program disable
+ [waiting for packets]
+
+Terminal 2: running scapy::
+
+ $scapy
+ welcome to Scapy
+ >> sendp(Ether()/Dot1Q()/IP(src='176.80.50.4', dst='192.168.3.1'), \
+ iface='some interface', count=1)
+ >> sendp(Ether()/Dot1Q()/IP(src='176.80.50.5', dst='192.168.3.2'), \
+ iface='some interface', count=1)
+ >> sendp(Ether()/Dot1Q()/IP(src='176.80.50.6', dst='192.168.5.2'), \
+ iface='some interface', count=1)
+
+Terminal 1: output log::
+
+ received packet with src ip = 176.80.50.4
+ received packet with src ip = 176.80.50.5
+ received packet with src ip = 176.80.50.6
+
+Terminal 1: running sample app flow rule enabled::
+
+ ./filter-program enabled
+ [waiting for packets]
+
+Terminal 2: running scapy::
+
+ $scapy
+ welcome to Scapy
+ >> sendp(Ether()/Dot1Q()/IP(src='176.80.50.4', dst='192.168.3.1'), \
+ iface='some interface', count=1)
+ >> sendp(Ether()/Dot1Q()/IP(src='176.80.50.5', dst='192.168.3.2'), \
+ iface='some interface', count=1)
+ >> sendp(Ether()/Dot1Q()/IP(src='176.80.50.6', dst='192.168.5.2'), \
+ iface='some interface', count=1)
+
+Terminal 1: output log::
+
+ received packet with src ip = 176.80.50.6
+
+Send vlan to queue
+------------------
+
+Description
+~~~~~~~~~~~
+
+In this example we will create a rule that routes all vlan id 123 to queue 3.
+
+This code is equivalent to the following testpmd command (wrapped for
+clarity)::
+
+ tpmd> flow create 0 ingress pattern eth / vlan vid spec 123 /
+ end actions queue index 3 / end
+
+Code
+~~~~
+
+.. code-block:: c
+
+ struct rte_flow_attr attr = {.ingress = 1};
+ struct rte_flow_item pattern[MAX_PATTERN_IN_FLOW];
+ struct rte_flow_action actions[MAX_ACTIONS_IN_FLOW];
+ struct rte_flow_item_etc eth;
+ struct rte_flow_item_vlan vlan;
+ struct rte_flow_action_queue queue = { .index = 3 };
+ struct rte_flow *flow;
+ struct rte_flow_error error;
+
+ /* setting the eth to pass all packets */
+ pattern[0].type = RTE_FLOW_ITEM_TYPE_ETH;
+ pattern[0].spec = &eth;
+
+ /* set the vlan to pas all packets */
+ vlan.vid = 123;
+ pattern[1] = RTE_FLOW_ITEM_TYPE_VLAN;
+ pattern[1].spec = &vlan;
+
+ /* end the pattern array */
+ pattern[2].type = RTE_FLOW_ITEM)TYPE_END;
+
+ /* create the drop action */
+ actions[0].type = RTE_FLOW_ACTION_TYPE_QUEUE;
+ actions[0].conf = &queue
+ actions[1].type = RTE_FLOW_ACTION_TYPE_END;
+
+ /* validate and create the flow rule */
+ if (!rte_flow_validate(port_id, &attr, pattern, actions, &error)
+ flow = rte_flow_create(port_id, &attr, pattern, actions, &error)
+
+Output
+~~~~~~
+
+Terminal 1: running sample app flow rule disabled::
+
+ ./filter-program disable
+ [waiting for packets]
+
+Terminal 2: running scapy::
+
+ $scapy
+ welcome to Scapy
+ >> sendp(Ether()/Dot1Q(vlan=123)/IP(src='176.80.50.4', dst='192.168.3.1'), \
+ iface='some interface', count=1)
+ >> sendp(Ether()/Dot1Q(vlan=50)/IP(src='176.80.50.5', dst='192.168.3.2'), \
+ iface='some interface', count=1)
+ >> sendp(Ether()/Dot1Q(vlan=123)/IP(src='176.80.50.6', dst='192.168.5.2'), \
+ iface='some interface', count=1)
+
+Terminal 1: output log::
+
+ received packet with src ip = 176.80.50.4 sent to queue 2
+ received packet with src ip = 176.80.50.5 sent to queue 1
+ received packet with src ip = 176.80.50.6 sent to queue 0
+
+Terminal 1: running sample app flow rule enabled::
+
+ ./filter-program enabled
+ [waiting for packets]
+
+Terminal 2: running scapy::
+
+ $scapy
+ welcome to Scapy
+ >> sendp(Ether()/Dot1Q(vlan=123)/IP(src='176.80.50.4', dst='192.168.3.1'), \
+ iface='some interface', count=1)
+ >> sendp(Ether()/Dot1Q(vlan=50)/IP(src='176.80.50.5', dst='192.168.3.2'), \
+ iface='some interface', count=1)
+ >> sendp(Ether()/Dot1Q(vlan=123)/IP(src='176.80.50.6', dst='192.168.5.2'), \
+ iface='some interface', count=1)
+
+Terminal 1: output log::
+
+ received packet with src ip = 176.80.50.4 sent to queue 3
+ received packet with src ip = 176.80.50.5 sent to queue 1
+ received packet with src ip = 176.80.50.6 sent to queue 3