diff options
author | 2017-08-16 18:42:05 +0100 | |
---|---|---|
committer | 2017-08-16 18:46:04 +0100 | |
commit | f239aed5e674965691846e8ce3f187dd47523689 (patch) | |
tree | a153a3125c6e183c73871a8ecaa4b285fed5fbd5 /doc/guides/linux_gsg/nic_perf_intel_platform.rst | |
parent | bf7567fd2a5b0b28ab724046143c24561d38d015 (diff) |
New upstream version 17.08
Change-Id: I288b50990f52646089d6b1f3aaa6ba2f091a51d7
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Diffstat (limited to 'doc/guides/linux_gsg/nic_perf_intel_platform.rst')
-rw-r--r-- | doc/guides/linux_gsg/nic_perf_intel_platform.rst | 74 |
1 files changed, 2 insertions, 72 deletions
diff --git a/doc/guides/linux_gsg/nic_perf_intel_platform.rst b/doc/guides/linux_gsg/nic_perf_intel_platform.rst index 709113dc..febd7337 100644 --- a/doc/guides/linux_gsg/nic_perf_intel_platform.rst +++ b/doc/guides/linux_gsg/nic_perf_intel_platform.rst @@ -186,75 +186,5 @@ Configurations before running DPDK **Note**: To get the best performance, ensure that the core and NICs are in the same socket. In the example above ``85:00.0`` is on socket 1 and should be used by cores on socket 1 for the best performance. -4. Bind the test ports to DPDK compatible drivers, such as igb_uio. For example bind two ports to a DPDK compatible driver and check the status: - - .. code-block:: console - - - # Bind ports 82:00.0 and 85:00.0 to dpdk driver - ./dpdk_folder/usertools/dpdk-devbind.py -b igb_uio 82:00.0 85:00.0 - - # Check the port driver status - ./dpdk_folder/usertools/dpdk-devbind.py --status - - See ``dpdk-devbind.py --help`` for more details. - - -More details about DPDK setup and Linux kernel requirements see :ref:`linux_gsg_compiling_dpdk`. - - -Example of getting best performance for an Intel NIC ----------------------------------------------------- - -The following is an example of running the DPDK ``l3fwd`` sample application to get high performance with an -Intel server platform and Intel XL710 NICs. -For specific 40G NIC configuration please refer to the i40e NIC guide. - -The example scenario is to get best performance with two Intel XL710 40GbE ports. -See :numref:`figure_intel_perf_test_setup` for the performance test setup. - -.. _figure_intel_perf_test_setup: - -.. figure:: img/intel_perf_test_setup.* - - Performance Test Setup - - -1. Add two Intel XL710 NICs to the platform, and use one port per card to get best performance. - The reason for using two NICs is to overcome a PCIe Gen3's limitation since it cannot provide 80G bandwidth - for two 40G ports, but two different PCIe Gen3 x8 slot can. - Refer to the sample NICs output above, then we can select ``82:00.0`` and ``85:00.0`` as test ports:: - - 82:00.0 Ethernet [0200]: Intel XL710 for 40GbE QSFP+ [8086:1583] - 85:00.0 Ethernet [0200]: Intel XL710 for 40GbE QSFP+ [8086:1583] - -2. Connect the ports to the traffic generator. For high speed testing, it's best to use a hardware traffic generator. - -3. Check the PCI devices numa node (socket id) and get the cores number on the exact socket id. - In this case, ``82:00.0`` and ``85:00.0`` are both in socket 1, and the cores on socket 1 in the referenced platform - are 18-35 and 54-71. - Note: Don't use 2 logical cores on the same core (e.g core18 has 2 logical cores, core18 and core54), instead, use 2 logical - cores from different cores (e.g core18 and core19). - -4. Bind these two ports to igb_uio. - -5. As to XL710 40G port, we need at least two queue pairs to achieve best performance, then two queues per port - will be required, and each queue pair will need a dedicated CPU core for receiving/transmitting packets. - -6. The DPDK sample application ``l3fwd`` will be used for performance testing, with using two ports for bi-directional forwarding. - Compile the ``l3fwd sample`` with the default lpm mode. - -7. The command line of running l3fwd would be something like the followings:: - - ./l3fwd -l 18-21 -n 4 -w 82:00.0 -w 85:00.0 \ - -- -p 0x3 --config '(0,0,18),(0,1,19),(1,0,20),(1,1,21)' - - This means that the application uses core 18 for port 0, queue pair 0 forwarding, core 19 for port 0, queue pair 1 forwarding, - core 20 for port 1, queue pair 0 forwarding, and core 21 for port 1, queue pair 1 forwarding. - - -8. Configure the traffic at a traffic generator. - - * Start creating a stream on packet generator. - - * Set the Ethernet II type to 0x0800. +4. Check which kernel drivers needs to be loaded and whether there is a need to unbind the network ports from their kernel drivers. +More details about DPDK setup and Linux kernel requirements see :ref:`linux_gsg_compiling_dpdk` and :ref:`linux_gsg_linux_drivers`. |