summaryrefslogtreecommitdiffstats
path: root/doc/guides/nics/dpaa2.rst
diff options
context:
space:
mode:
authorLuca Boccassi <luca.boccassi@gmail.com>2018-11-19 12:59:01 +0000
committerLuca Boccassi <luca.boccassi@gmail.com>2018-11-19 12:59:24 +0000
commit29058550643267a554e0368806dece63b047c5cb (patch)
treea6f573fe3fbc14585529b83cfcc65da2dceefbf5 /doc/guides/nics/dpaa2.rst
parent8a853e3f0275efc8b05cb195085d45946942744a (diff)
New upstream version 18.11-rc4upstream/18.11-rc4
Change-Id: I861e1a2f7df210f57f44f1ad56b9ef789a4675e3 Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Diffstat (limited to 'doc/guides/nics/dpaa2.rst')
-rw-r--r--doc/guides/nics/dpaa2.rst49
1 files changed, 4 insertions, 45 deletions
diff --git a/doc/guides/nics/dpaa2.rst b/doc/guides/nics/dpaa2.rst
index e2f385d4..769dc4e1 100644
--- a/doc/guides/nics/dpaa2.rst
+++ b/doc/guides/nics/dpaa2.rst
@@ -409,8 +409,7 @@ Features of the DPAA2 PMD are:
Supported DPAA2 SoCs
--------------------
-
-- LS2080A/LS2040A
+- LX2160A
- LS2084A/LS2044A
- LS2088A/LS2048A
- LS1088A/LS1048A
@@ -418,52 +417,12 @@ Supported DPAA2 SoCs
Prerequisites
-------------
-There are three main pre-requisities for executing DPAA2 PMD on a DPAA2
-compatible board:
-
-1. **ARM 64 Tool Chain**
-
- For example, the `*aarch64* Linaro Toolchain <https://releases.linaro.org/components/toolchain/binaries/6.4-2017.08/aarch64-linux-gnu/>`_.
-
-2. **Linux Kernel**
-
- It can be obtained from `NXP's Github hosting <https://github.com/qoriq-open-source/linux>`_.
-
-3. **Rootfile system**
-
- Any *aarch64* supporting filesystem can be used. For example,
- Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained
- from `here <http://cdimage.ubuntu.com/ubuntu-base/releases/16.04/release/ubuntu-base-16.04.1-base-arm64.tar.gz>`_.
-
-As an alternative method, DPAA2 PMD can also be executed using images provided
-as part of SDK from NXP. The SDK includes all the above prerequisites necessary
-to bring up a DPAA2 board.
-
-The following dependencies are not part of DPDK and must be installed
-separately:
-
-- **NXP Linux SDK**
-
- NXP Linux software development kit (SDK) includes support for family
- of QorIQ® ARM-Architecture-based system on chip (SoC) processors
- and corresponding boards.
-
- It includes the Linux board support packages (BSPs) for NXP SoCs,
- a fully operational tool chain, kernel and board specific modules.
-
- SDK and related information can be obtained from: `NXP QorIQ SDK <http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX>`_.
-
-- **DPDK Extra Scripts**
-
- DPAA2 based resources can be configured easily with the help of ready scripts
- as provided in the DPDK Extra repository.
-
- `DPDK Extras Scripts <https://github.com/qoriq-open-source/dpdk-extras>`_.
+See :doc:`../platform/dpaa2` for setup information
Currently supported by DPDK:
-- NXP SDK **17.08+**.
-- MC Firmware version **10.3.1** and higher.
+- NXP SDK **18.09+**.
+- MC Firmware version **10.10.0** and higher.
- Supported architectures: **arm64 LE**.
- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.