Imported Upstream version 17.05

1 files changed, 69 insertions, 81 deletions

diff --git a/doc/guides/nics/i40e.rst b/doc/guides/nics/i40e.rst
index 5780268f..4d3c7ca0 100644
--- a/doc/guides/nics/i40e.rst
+++ b/doc/guides/nics/i40e.rst
@@ -64,6 +64,7 @@ Features of the I40E PMD are:
 - SR-IOV VF
 - Hot plug
 - IEEE1588/802.1AS timestamping
+- VF Daemon (VFD) - EXPERIMENTAL
 
 
 Prerequisites
@@ -104,11 +105,6 @@ Please note that enabling debugging options may affect system performance.
   Toggle the use of Vector PMD instead of normal RX/TX path.
   To enable vPMD for RX, bulk allocation for Rx must be allowed.
 
-- ``CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE`` (default ``y``)
-
-  Toggle to enable RX ``olflags``.
-  This is only meaningful when Vector PMD is used.
-
 - ``CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC`` (default ``n``)
 
   Toggle to use a 16-byte RX descriptor, by default the RX descriptor is 32 byte.
@@ -130,82 +126,15 @@ Please note that enabling debugging options may affect system performance.
   Interrupt Throttling interval.
 
 
-Driver Compilation
-~~~~~~~~~~~~~~~~~~
-
-To compile the I40E PMD see :ref:`Getting Started Guide for Linux <linux_gsg>` or
-:ref:`Getting Started Guide for FreeBSD <freebsd_gsg>` depending on your platform.
-
-
-Linux
------
-
-
-Running testpmd
-~~~~~~~~~~~~~~~
-
-This section demonstrates how to launch ``testpmd`` with Intel XL710/X710
-devices managed by ``librte_pmd_i40e`` in the Linux operating system.
-
-#. Load ``igb_uio`` or ``vfio-pci`` driver:
-
-   .. code-block:: console
-
-      modprobe uio
-      insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
-
-   or
-
-   .. code-block:: console
-
-      modprobe vfio-pci
-
-#. Bind the XL710/X710 adapters to ``igb_uio`` or ``vfio-pci`` loaded in the previous step:
-
-   .. code-block:: console
-
-      ./tools/dpdk-devbind.py --bind igb_uio 0000:83:00.0
-
-   Or setup VFIO permissions for regular users and then bind to ``vfio-pci``:
-
-   .. code-block:: console
-
-      ./tools/dpdk-devbind.py --bind vfio-pci 0000:83:00.0
-
-#. Start ``testpmd`` with basic parameters:
-
-   .. code-block:: console
-
-      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 83:00.0 -- -i
-
-   Example output:
-
-   .. code-block:: console
-
-      ...
-      EAL: PCI device 0000:83:00.0 on NUMA socket 1
-      EAL: probe driver: 8086:1572 rte_i40e_pmd
-      EAL: PCI memory mapped at 0x7f7f80000000
-      EAL: PCI memory mapped at 0x7f7f80800000
-      PMD: eth_i40e_dev_init(): FW 5.0 API 1.5 NVM 05.00.02 eetrack 8000208a
-      Interactive-mode selected
-      Configuring Port 0 (socket 0)
-      ...
-
-      PMD: i40e_dev_rx_queue_setup(): Rx Burst Bulk Alloc Preconditions are
-      satisfied.Rx Burst Bulk Alloc function will be used on port=0, queue=0.
-
-      ...
-      Port 0: 68:05:CA:26:85:84
-      Checking link statuses...
-      Port 0 Link Up - speed 10000 Mbps - full-duplex
-      Done
+Driver compilation and testing
+------------------------------
 
-      testpmd>
+Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+for details.
 
 
 SR-IOV: Prerequisites and sample Application Notes
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+--------------------------------------------------
 
 #. Load the kernel module:
 
@@ -254,6 +183,37 @@ SR-IOV: Prerequisites and sample Application Notes
 #. Assign VF to VM, and bring up the VM.
    Please see the documentation for the *I40E/IXGBE/IGB Virtual Function Driver*.
 
+#. Running testpmd:
+
+   Follow instructions available in the document
+   :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+   to run testpmd.
+
+   Example output:
+
+   .. code-block:: console
+
+      ...
+      EAL: PCI device 0000:83:00.0 on NUMA socket 1
+      EAL: probe driver: 8086:1572 rte_i40e_pmd
+      EAL: PCI memory mapped at 0x7f7f80000000
+      EAL: PCI memory mapped at 0x7f7f80800000
+      PMD: eth_i40e_dev_init(): FW 5.0 API 1.5 NVM 05.00.02 eetrack 8000208a
+      Interactive-mode selected
+      Configuring Port 0 (socket 0)
+      ...
+
+      PMD: i40e_dev_rx_queue_setup(): Rx Burst Bulk Alloc Preconditions are
+      satisfied.Rx Burst Bulk Alloc function will be used on port=0, queue=0.
+
+      ...
+      Port 0: 68:05:CA:26:85:84
+      Checking link statuses...
+      Port 0 Link Up - speed 10000 Mbps - full-duplex
+      Done
+
+      testpmd>
+
 
 Sample Application Notes
 ------------------------
@@ -267,7 +227,7 @@ To start ``testpmd``, and add vlan 10 to port 0:
 
 .. code-block:: console
 
-    ./app/testpmd -c ffff -n 4 -- -i --forward-mode=mac
+    ./app/testpmd -l 0-15 -n 4 -- -i --forward-mode=mac
     ...
 
     testpmd> set promisc 0 off
@@ -302,7 +262,7 @@ Start ``testpmd`` with ``--disable-rss`` and ``--pkt-filter-mode=perfect``:
 
 .. code-block:: console
 
-   ./app/testpmd -c ffff -n 4 -- -i --disable-rss --pkt-filter-mode=perfect \
+   ./app/testpmd -l 0-15 -n 4 -- -i --disable-rss --pkt-filter-mode=perfect \
                  --rxq=8 --txq=8 --nb-cores=8 --nb-ports=1
 
 Add a rule to direct ``ipv4-udp`` packet whose ``dst_ip=2.2.2.5, src_ip=2.2.2.3, src_port=32, dst_port=32`` to queue 1:
@@ -444,8 +404,8 @@ is used as the VF driver, DPDK cannot choose 16 byte receive descriptor. That
 is to say, user should keep ``CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n`` in
 config file.
 
-Link down with i40e kernel driver after DPDK application exist
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Link down with i40e kernel driver after DPDK application exit
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 After DPDK application quit, and the device is bound back to Linux i40e
 kernel driver, the link cannot be up after ``ifconfig <dev> up``.
@@ -459,3 +419,31 @@ Receive packets with Ethertype 0x88A8
 
 Due to the FW limitation, PF can receive packets with Ethertype 0x88A8
 only when floating VEB is disabled.
+
+Incorrect Rx statistics when packet is oversize
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When a packet is over maximum frame size, the packet is dropped.
+However the Rx statistics, when calling `rte_eth_stats_get` incorrectly
+shows it as received.
+
+VF & TC max bandwidth setting
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The per VF max bandwidth and per TC max bandwidth cannot be enabled in parallel.
+The dehavior is different when handling per VF and per TC max bandwidth setting.
+When enabling per VF max bandwidth, SW will check if per TC max bandwidth is
+enabled. If so, return failure.
+When enabling per TC max bandwidth, SW will check if per VF max bandwidth
+is enabled. If so, disable per VF max bandwidth and continue with per TC max
+bandwidth setting.
+
+TC TX scheduling mode setting
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There're 2 TX scheduling modes for TCs, round robin and strict priority mode.
+If a TC is set to strict priority mode, it can consume unlimited bandwidth.
+It means if APP has set the max bandwidth for that TC, it comes to no
+effect.
+It's suggested to set the strict priority mode for a TC that is latency
+sensitive but no consuming much bandwidth.