diff options
author | 2017-05-16 14:51:32 +0200 | |
---|---|---|
committer | 2017-05-16 14:51:32 +0200 | |
commit | fca143f059a0bddd7d47b8dc2df646a891b0eb0f (patch) | |
tree | 4bfeadc905c977e45e54a90c42330553b8942e4e /doc/guides/nics/liquidio.rst | |
parent | ce3d555e43e3795b5d9507fcfc76b7a0a92fd0d6 (diff) |
Imported Upstream version 17.05
Diffstat (limited to 'doc/guides/nics/liquidio.rst')
-rw-r--r-- | doc/guides/nics/liquidio.rst | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/doc/guides/nics/liquidio.rst b/doc/guides/nics/liquidio.rst new file mode 100644 index 00000000..f04cb16d --- /dev/null +++ b/doc/guides/nics/liquidio.rst @@ -0,0 +1,223 @@ +.. BSD LICENSE + Copyright(c) 2017 Cavium, Inc.. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Cavium, Inc. nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +LiquidIO VF Poll Mode Driver +============================ + +The LiquidIO VF PMD library (librte_pmd_lio) provides poll mode driver support for +Cavium LiquidIO® II server adapter VFs. PF management and VF creation can be +done using kernel driver. + +More information can be found at `Cavium Official Website +<http://cavium.com/LiquidIO_Adapters.html>`_. + +Supported LiquidIO Adapters +----------------------------- + +- LiquidIO II CN2350 210SV/225SV +- LiquidIO II CN2360 210SV/225SV + + +Pre-Installation Configuration +------------------------------ + +The following options can be modified in the ``config`` file. +Please note that enabling debugging options may affect system performance. + +- ``CONFIG_RTE_LIBRTE_LIO_PMD`` (default ``y``) + + Toggle compilation of LiquidIO PMD. + +- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_DRIVER`` (default ``n``) + + Toggle display of generic debugging messages. + +- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_INIT`` (default ``n``) + + Toggle display of initialization related messages. + +- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_RX`` (default ``n``) + + Toggle display of receive fast path run-time messages. + +- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_TX`` (default ``n``) + + Toggle display of transmit fast path run-time messages. + +- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX`` (default ``n``) + + Toggle display of mailbox messages. + +- ``CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS`` (default ``n``) + + Toggle display of register reads and writes. + + +SR-IOV: Prerequisites and Sample Application Notes +-------------------------------------------------- + +This section provides instructions to configure SR-IOV with Linux OS. + +#. Verify SR-IOV and ARI capabilities are enabled on the adapter using ``lspci``: + + .. code-block:: console + + lspci -s <slot> -vvv + + Example output: + + .. code-block:: console + + [...] + Capabilities: [148 v1] Alternative Routing-ID Interpretation (ARI) + [...] + Capabilities: [178 v1] Single Root I/O Virtualization (SR-IOV) + [...] + Kernel driver in use: LiquidIO + +#. Load the kernel module: + + .. code-block:: console + + modprobe liquidio + +#. Bring up the PF ports: + + .. code-block:: console + + ifconfig p4p1 up + ifconfig p4p2 up + +#. Change PF MTU if required: + + .. code-block:: console + + ifconfig p4p1 mtu 9000 + ifconfig p4p2 mtu 9000 + +#. Create VF device(s): + + Echo number of VFs to be created into ``"sriov_numvfs"`` sysfs entry + of the parent PF. + + .. code-block:: console + + echo 1 > /sys/bus/pci/devices/0000:03:00.0/sriov_numvfs + echo 1 > /sys/bus/pci/devices/0000:03:00.1/sriov_numvfs + +#. Assign VF MAC address: + + Assign MAC address to the VF using iproute2 utility. The syntax is:: + + ip link set <PF iface> vf <VF id> mac <macaddr> + + Example output: + + .. code-block:: console + + ip link set p4p1 vf 0 mac F2:A8:1B:5E:B4:66 + +#. Assign VF(s) to VM. + + The VF devices may be passed through to the guest VM using qemu or + virt-manager or virsh etc. + + Example qemu guest launch command: + + .. code-block:: console + + ./qemu-system-x86_64 -name lio-vm -machine accel=kvm \ + -cpu host -m 4096 -smp 4 \ + -drive file=<disk_file>,if=none,id=disk1,format=<type> \ + -device virtio-blk-pci,scsi=off,drive=disk1,id=virtio-disk1,bootindex=1 \ + -device vfio-pci,host=03:00.3 -device vfio-pci,host=03:08.3 + +#. Running testpmd + + Refer to the document + :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>` to run + ``testpmd`` application. + + .. note:: + + Use ``igb_uio`` instead of ``vfio-pci`` in VM. + + Example output: + + .. code-block:: console + + [...] + EAL: PCI device 0000:03:00.3 on NUMA socket 0 + EAL: probe driver: 177d:9712 net_liovf + EAL: using IOMMU type 1 (Type 1) + PMD: net_liovf[03:00.3]INFO: DEVICE : CN23XX VF + EAL: PCI device 0000:03:08.3 on NUMA socket 0 + EAL: probe driver: 177d:9712 net_liovf + PMD: net_liovf[03:08.3]INFO: DEVICE : CN23XX VF + Interactive-mode selected + USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=171456, size=2176, socket=0 + Configuring Port 0 (socket 0) + PMD: net_liovf[03:00.3]INFO: Starting port 0 + Port 0: F2:A8:1B:5E:B4:66 + Configuring Port 1 (socket 0) + PMD: net_liovf[03:08.3]INFO: Starting port 1 + Port 1: 32:76:CC:EE:56:D7 + Checking link statuses... + Port 0 Link Up - speed 10000 Mbps - full-duplex + Port 1 Link Up - speed 10000 Mbps - full-duplex + Done + testpmd> + + +Limitations +----------- + +VF MTU +~~~~~~ + +VF MTU is limited by PF MTU. Raise PF value before configuring VF for larger packet size. + +VLAN offload +~~~~~~~~~~~~ + +Tx VLAN insertion is not supported and consequently VLAN offload feature is +marked partial. + +Ring size +~~~~~~~~~ + +Number of descriptors for Rx/Tx ring should be in the range 128 to 512. + +CRC striping +~~~~~~~~~~~~ + +LiquidIO adapters strip ethernet FCS of every packet coming to the host +interface. So, CRC will be stripped even when the ``rxmode.hw_strip_crc`` +member is set to 0 in ``struct rte_eth_conf``. |